Engineering Science and Materials Commons^™

Mechanical Properties Of Corner Lap-45 Types Joined Using Friction Stir Welding, Widia Setiawan, Nugroho Santoso, Felixianus Eko Wismo Winarto, Radhian Krisnaputra, Wirawan Widya Mandala, Jibril Maulana

Journal of Mechanical Engineering Science and Technology (JMEST)

Solid welding has always been concerned with probe design, pins, and joint strength. Many researchers have conducted studies on joints, such as butt joints, lap joints, and T joints, but the results show low strength. This study analyzes the mechanical properties of a new design of a 90o angle joint joined by friction stir welding. This study connected aluminum 6061 using the friction stir welding method using a rectifying jig and a probe with EMS 45 material. The corner joint designs used corner-lap 45 with feed rate as independent variables in 6, 8, 10, 15, and 30 mm/min and dependent …

Numerical Simulation Of Laser Induced Elastic Waves In Response To Short And Ultrashort Laser Pulses., Alireza Zarei

All Dissertations

In an era of intensified market competition, the demand for cost-effective, high-quality, high-performance, and reliable products continues to rise. Meeting this demand necessitates the mass production of premium products through the integration of cutting-edge technologies and advanced materials while ensuring their integrity and safety. In this context, Nondestructive Testing (NDT) techniques emerge as indispensable tools for guaranteeing the integrity, reliability, and safety of products across diverse industries.

Various NDT techniques, including ultrasonic testing, computed tomography, thermography, and acoustic emissions, have long served as cornerstones for inspecting materials and structures. Among these, ultrasonic testing stands out as the most prevalent method, …

Simulation Of Wave Propagation In Granular Particles Using A Discrete Element Model, Syed Tahmid Hussan

College of Graduate Studies: Theses & Dissertations

The understanding of Bender Element mechanism and utilization of Particle Flow Code (PFC) to simulate the seismic wave behavior is important to test the dynamic behavior of soil particles. Both discrete and finite element methods can be used to simulate wave behavior. However, Discrete Element Method (DEM) is mostly suitable, as the micro scaled soil particle cannot be fully considered as continuous specimen like a piece of rod or aluminum. Recently DEM has been widely used to study mechanical properties of soils at particle level considering the particles as balls. This study represents a comparative analysis of Voigt and Best …

Study On Effect Of 3d Printing Parameters On Surface Roughness And Tensile Strength Using Analysis Of Variance, Faqih Fadillah, Heru Suryanto, Suprayitno Suprayitno

Journal of Mechanical Engineering Science and Technology (JMEST)

Fused deposition modeling of 3D printing is the process of making workpieces or parts by adding filaments to each layer. Some indicators of a high-quality product of 3D printing are the precisions dimensions, the surface roughness, and tensile strength. This research aims to find the parameters most affecting surface roughness and tensile strength. The research design used an experimental method with input parameters: (1) print speed (15-35 mm/s), (2) print temperature (200-210C), (3) layer height (0.1 – 0.3 mm), (4) infill line directions (0-90), and dependent variables were surface roughness and tensile strength. The data distribution used the L9 orthogonal …

Mechanical Characterization Of Naoh-Treated Agel Fiber-Cotton Composites, I Gusti Ngurah Nitya Santhiarsa, I Gusti Bagus Wijaya Kusuma, I Gede Artha Negara

Journal of Mechanical Engineering Science and Technology (JMEST)

Composites comprising two or more distinct materials are fabricated to enhance the mechanical properties of the constituent materials. A common approach for generating composites is vacuum infusion. This technique enables the infusion of two materials utilizing a vacuum. In the field of composite science, textile composites have emerged as an important new development. Agel rope, derived from twisting agel fibers, exhibits inferior bending strength and elongation compared to ropes fabricated from synthetic fibers. Moreover, agel rope is susceptible to bacterial decay. This study aims to characterize the mechanical properties of textile composites comprising woven agel rope subjected to NaOH treatment. …

Heat Conduction In Cylindrical Coordinates With Time-Varying Conduction Coefficients: A Practical Engineering Approach, Lulut Alfaris, Ruben Cornelius Siagian, Aldi Cahya Muhammad, Ukta Indra Nyuswantoro, Budiman Nasution

Journal of Mechanical Engineering Science and Technology (JMEST)

This research aims to develop a mathematical method for expressing the Laplace operator in cylindrical coordinates and applying it to solve heat conduction equations in various scenarios. The method commences by transforming Cartesian coordinates into cylindrical coordinates and identifying the necessary substitutions. The result is the expression of the Laplace operator in cylindrical coordinates, which is subsequently employed to address heat conduction equations within cylindrical coordinates. Various cases encompassing different initial and boundary conditions, as well as variations in the conduction coefficient over time, are meticulously considered. In each instance, precise mathematical solutions are determined and subjected to thorough analysis. …

Numerical Study On Resistance Of Stepped Planing Hull, Fajri Ashfi Rayhan, Andika Masrul, Arya Khairullah Akbar, Bima Anugerah Putra

Journal of Mechanical Engineering Science and Technology (JMEST)

A stepped planing hull, also known as a step hull, is a hull modification that reduces the wetted surface area. Although this type of hull has proven effective in several ships, it is still rarely used. The step hull possesses numerous advantages that make it ideal for activities involving small and fast boats. However, regrettably, its full potential remains untapped at present. The purpose of this study was to identify the effect of variations in the angle of the step hull on resistance or drag. The study utilized the CFD method, and three hull configuration models were used at each …

Analyzing Transition Metallic Catalytic Converter Impact On Four-Stroke Motorcycle Fuel Consumption, Sudirman Rizki Ariyanto, Ata Syifa’ Nugraha, Wahyu Robby Cahyadi, Yelma Dianastiti, Muhammad Yandi Pratama

Journal of Mechanical Engineering Science and Technology (JMEST)

Increased exhaust emissions from motor vehicles have become a major concern in efforts to reduce air pollution. One developed solution is the use of transition metallic catalytic converter (TMCC) technology in vehicle exhaust systems. This study aims to compare the fuel consumption efficiency of three types of exhaust systems, namely standard exhaust without a catalyst (STD WC), the standard exhaust with Original Equipment Manufacturer catalyst (STD OEM), and an exhaust system equipped with a Copper-Coated Chrome Metallic Catalytic Converter (TMCC CuCr). The data analysis method employed a quantitative approach by collecting fuel consumption data at each rpm and analyzing the …

Effect Of The Homogenization Process On Titanium Oxide-Reinforced Nanocellulose Composite Membranes, Taufiq Mahsuli, Aisyah Larasati, Aminnudin Aminnudin, Jibril Maulana

Journal of Mechanical Engineering Science and Technology (JMEST)

Indonesian pineapple production can reach 200 tons per day; however, pineapples generate a significant amount of waste. Pineapple peel waste can be used to make membranes. Composite membranes containing TiO2 have dense properties, low porosity, and increase the mechanical strength of the cellulose sheet. This research uses various ultrasonic homogenizers to homogenize the distribution of nanocellulose and TiO2 (50% and 100% power with 30, 60, and 90 minutes). The casting method is used to shape the membrane. The SEM test shows that the higher the power used and the longer the sonication time, the less agglomeration of about 1.63%/ cm2 …

Effect Of Heating Temperature, Holding Time And Stabilization Temperature On The Al-Foam Properties, Dewi Puspitasari, Poppy Puspitasari, Mazli Mustapha, Turnad Lenggo Ginta

Journal of Mechanical Engineering Science and Technology (JMEST)

The interest in metallic foam is increasing since their cellular structures have a unique combination of properties such as high stiffness, low density, lightweight, high specific strength, and thermal insulation. Commonly, the performance of metallic foam can be improved by the heat treatment process. However, the previous heat treatment methods still present the brittle crack path and the research on heat treatments of the metal foam properties is very limited. In this study, individual parameters in stress relieving treatment that contribute to Al-Foam properties were investigated. The stress-relieving process of the samples was performed using a vacuum furnace. The composition …

Vertical Shaft Kinetic Turbine Performance Using A Cup-Shape Blade, Kennie A. Lempoy, Nita C. V. Monintja, Arwanto M. A. Lakat

Journal of Mechanical Engineering Science and Technology (JMEST)

The abundant availability of alternative energy sources forms the fundamental foundation for rural energy development. In particular, renewable energy sources are indispensable in rural areas due to their ecofriendly nature and widespread accessibility, which helps preserve the environment by avoiding pollution. Indonesia, a country blessed with vast water resources, especially its rivers, holds enormous potential for harnessing kinetic energy derived from fast-flowing river waters. Effective utilization of this kinetic energy has the potential to address energy shortages in the country. In this context, there is a pressing need to enhance the efficiency of kinetic turbines designed to function as electricity …

Photocatalytic Scheme With External Magnetic Field On Coffee Waste In Hydrogen Production, Abid Fahreza Alphanoda, Eko Prasetyo, Wisnu Broto

Journal of Mechanical Engineering Science and Technology (JMEST)

Photocatalytic is considered a deadlock-breaking technology for renewable energy and lowering environmental pollutants. Photocatalytic efficiency efforts are improved by activating the photocatalyst to introduce an external magnetic field. This review highlights recent breakthroughs by comparing original coffee waste, activation of coffee waste with the addition of catalysts, and manipulation of spin electrons by applying external magnets. Characterization was done with FTIR to look at chemical bonds, UV-Vis with Tauc's Relation approach to measure bandgap, and material morphology using SEM EDX. The increase in photocatalyst activation aligns with the decrease in bandgap value. The rate of decline in bandgap is in …

Artificial Neural Network-Based Modeling Of Performance Spark Ignition Engine Fuelled With Bioethanol And Gasoline, Susi Marianingsih, Farhanna Mar’I, Hendry Y. Nanlohy

Journal of Mechanical Engineering Science and Technology (JMEST)

Machine learning technology can distinguish the relationship between engine characteristics and performances. Therefore, the goal of the present work is to predict the performance parameters of a singlecylinder 4-stroke gasoline engine at different ignition timings using a blended mixture of gasoline and bioethanol by an artificial neural network (ANN). Experimental data for training and testing in the proposed ANN was obtained at a dynamic speed and full load condition. An ANN model was developed based on standard Back-Propagation algorithm for the spark ignition engine. Multi-layer perception network (MLP) was used for non-linear mapping between the input and output parameters. An …

The Effect Of Adding Aluminium On The Performance Of Zno Nrs/Pani In Their Application As Photoelectrochemical Water Splitting, Eprilia Trikusuma Sari, Nandang Mufti, Anissa Chairani Alfin Nadhira, Hari Wisodo, Markus Diantoro

Journal of Mechanical Engineering Science and Technology (JMEST)

Photoelectrochemical (PEC) is a new renewable energy technology that converts H2O into hydrogen and oxygen gas with the help of sunlight. A photoelectrochemical cell device consists of three main components, one of which is the photoanode. One of the materials that can be used as a photoanode is ZnO which has good electrical properties and is non-toxic. Nanorods-structured ZnO has the advantage of being able to increase light absorption due to its high surface area. However, the resulting performance is still quite low. So it is necessary to make modifications to the photoanode, one of which is by adding aluminium …

Nanoscale Modeling Of Membrane Systems Under Mechanical Deformation In Traumatic Brain Injury Using Molecular Dynamics, Anh Thi Ngoc Vo

Theses and Dissertations

Neuronal membrane disruption and mechanoporation are nanoscale damage mechanisms that critically affect brain cell viability during traumatic brain injury (TBI). These nanoscale cellular impairments are elusive in experiments and necessitate in silico approaches such as molecular dynamics (MD) simulations. Implementing MD, this research aims to investigate the effects of different key factors related to membrane deformation and damage, including force field resolutions, lipid compositions, and loading conditions.

To examine the impact of force field resolution, MD deformation simulations were conducted on 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphatidylcholine (POPC) lipid bilayer membranes, using all-atom (AA), united-atom (UA), and coarse-grained Martini (CG-M) force fields. The mechanical responses …

Mechanical Properties Of Biocomposite With Various Composition Of Caco3 And Starch, Agris Setiawan, Fransisca Diana Wahyuningsih, Riria Zendy Mirahati

Journal of Mechanical Engineering Science and Technology (JMEST)

Calcium carbonate has the potential to be used in the development of medical materials, including biomaterials. Biocomposite is composed of CaCO3 as matrix material and bioplastic from the combination of corn starch and cassava starch as reinforcement. This study aims to determine mechanical properties such as tensile strength and bending/flexural strength with varying compositions of CaCO3 and bioplastic. Characterization of the biocomposite uses Scanning Electron Microscope to observe the microstructure and composition elements of their structure. This study used 4 variations in the ratio of CaCO3 suspension: (Corn Starch + Cassava Starch). Each sample was characterized using specimen code A …

Synthesis And Characterization Of Nitrogen-Doped Activated Carbon For Lithium Battery Anode Applications, Prihanto Trihutomo, Poppy Puspitasari, Muhammad Bustomi Radja, Milzam Rahmat Busono

Journal of Mechanical Engineering Science and Technology (JMEST)

Nitrogen-dopped activated carbon was synthesized to see its effect on the characterization of the nitrogen surface functional groups, crystal size, and morphology of the resulting sample. Synthesis of nitrogen-doped activated carbon was carried out by varying the addition of Urea as a nitrogen doping source. Activated carbon compared its characteristics with variations in the concentration of added Urea to activated carbon, at 1:3 and 1:5. The FTIR results obtained were the presence of functional groups indicating the presence of nitrogen bonds in each sample. The crystallinity results showed that the samples were classified as crystalline and nitrogen doping influenced the …

Designing A Naabsa Class Tanker Ship With Bottom Protection From Ground, Victor A. Kulesh, Mathias B. Prasetio, Fam Chung Hiep

Journal of Mechanical Engineering Science and Technology (JMEST)

Indonesia is the world's largest archipelago country with a high potential for economic development and top producer and exporter of palm oil. As an archipelago country, the most efficient cargo transportation routes are through rivers and seas. Designing and building tankers, taking into account the specifics of the operation, are relevant. The paper considers the issues of designing a tanker for the transportation of crude palm oil with a defined operation area and route. The general concept of the vessel is proposed, taking into account the restrictions on the navigation area and draft for operation in the river. Particular attention …

Effect Of Grafting Nano-Tio2 On Sansevieria Cylindrica Fiber Properties, Chrisrulita Sekaradi Wiguna, Heru Suryanto, Aminuddin Aminuddin, Jibril Maulana, Joseph Selvi Binoj, Alamry Ali

Journal of Mechanical Engineering Science and Technology (JMEST)

Natural fibers, which are abundant, environmentally friendly, and biodegradable, are used as a replacement for synthetic fibers. The composite strength can be increased by treating the surfaces of natural fibers with suitable chemicals, which can also improve the interface interaction between fiber and matrix. Application of a coupling agent in chemical treatment is utilized to reinforce the bonding between fiber and matrix. The objective of the study is to determine the influence of silane concentration on the Sansevieria cylindrica fiber properties. The methods included fibers treatment using ethanol and coupling agent as dissolving and TiO2 with concentrations of 0%, 0.25%, …

The Combustion Characteristics Of Calophyllum Inophyllum Fuel In The Presence Of Magnetic Field, Imam Rudi Sugara, Nasrul Ilminnafik, Salahuddin Junus, Muh Nurkoyim Kustanto, Yuni Hermawan

Journal of Mechanical Engineering Science and Technology (JMEST)

The study objective is to investigate the combustion characteristics of Callophyllum inophyllum fuel in presence of a magnetic fields. To conduct the experiment, a bunsen burner was utilized, with fuel and air being dispensed via a syringe pump and compressor, both regulated by a flowmeter. The fuel and air pipes were heated to 532.15 (K) to facilitate fuel evaporation. The equivalent ratio of 0.5, 1, and 1.5 was adjusted to control air discharge and fuel. An 11,000 gausses artificial magnet was used, with N-S, N-S, N-N, and SS being the various magnetic pole configurations. The study found that the magnetic …

Effect Of Current And Pulse-On Time On Material Removal Rate And Surface Roughness Of Tungsten Carbide In Electric Discharge Machine Die-Sinking, Mochamad Deny Riyanto, Andoko Andoko, Heru Suryanto

Journal of Mechanical Engineering Science and Technology (JMEST)

The focus of manufacturing for tungsten carbide applications often demands a smooth surface quality as the result of the Electric Discharge Machine (EDM) die-sinking process, especially in the manufacture of die and mold with tungsten carbide material processed using a die-sinking EDM machine. The purpose of this study is to analyze the effect of electric current and pulse-on time on the Material Removal Rate (MRR) and surface roughness of tungsten carbide. Through the experimental method, the parameters varied, namely electric current 17 A, 20 A, 23 A, and pulse-on time 30 µs, 55 µs, and 80 µs. MRR was calculated …

Lap Joint On St.37 Steel Plate With Friction Welding Clamping Method, Widia Setiawan, Nugroho Santoso, Wiyadi Wiyadi, Muhammad Sulistiyo Aji, Rachmat Alamin, Achsan Tarmudi

Journal of Mechanical Engineering Science and Technology (JMEST)

Friction stir (FW) welding is a relatively fresh method that was created and has been continually refined and adapted to industrial applications due to its benefits. This approach for solid-state joining entails connecting the components at a temperature below their melting point and then heating them up. Clamp joint applications are widely used using external heating and hitting with high strength, but the clamped joints with the FW method are rarely done. The research studied the characteristic of clamped joints at various plate thicknesses using the FW method. In this study, 30 specimens were used in the form of a …

The Effect Of Cutting Speed Of Nitrogen Laser Cutting On The Surface Texture Of Sus 304 Plate, Yanuar Rohmat Aji Pradana, Raka Afrianto, Chandra Hairat Abdul Rahman, Andoko Andoko

Journal of Mechanical Engineering Science and Technology (JMEST)

The focus of today’s machining industry is on how to maintain high productivity and low cost achieved by high tool life during the operation. Laser cutting is considered the right solution because it offers cutting speeds of up to 170000 mm/min through a non-contact process regardless of the workpiece material hardness. The aim of this study is to analyze the effect of cutting speed on the surface texture aspects namely surface roughness, kerf shape, and dross height on the stainless steel 304 plate after laser cutting. The nitrogen laser was utilized with the cutting speed of 400, 1700, and 2000 …

Analysis Of Fire And Smoke Spread In Ki Hajar Dewantara Auditorium, State University Of Jakarta, Using Fire Dynamics Simulator, Pratomo Setyadi, Ariq Harits Arrizq

Journal of Mechanical Engineering Science and Technology (JMEST)

Fire behavior and smoke spread are influenced by various factors, including the amount and condition of combustible material, ventilation openings, and ceiling height. A high amount of combustible material in the auditorium poses a significant fire hazard, hence, efforts need to be made to minimize the risk. One approach is to use Computational Fluid Dynamic software, such as Fire Dynamics Simulator (FDS), to model fire combustion. In this research, it provides an overview of the heat release rate (HRR) of fires that occur as well as the effect of differences in ceiling height and the effect of ventilation on fire …

Effect Of Temperature Variations Of Corn (Maize) Oil Biodiesel On Torque Values And Thermal Efficiency Of Diesel Engines, Suardi Suardi, Rodlian Jamal Ikhwani, Ade Putri Rezki Aulia

Journal of Mechanical Engineering Science and Technology (JMEST)

The trend of consumption of hydrocarbon fuels in Indonesia, which is increasing every year, is not accompanied by the amount of production, which is decreasing. Alternative fuels to reduce dependence on hydrocarbon fuels. One form of alternative fuel is biodiesel, which is made from corn (maize) oil. Corn oil itself, if processed, can be an option for clean and environmentally friendly energy option and that is the main objective of this research is to determine the performance of biodiesel corn oil on diesel engines. The method used in this study is an experimental method where corn oil biodiesel is tested …

Neurocomputing And Interfacing Digital Tasting System: Research, Design, And Evaluation, Amira J. Zaylaa, Ahmad El Hajj

BAU Journal - Science and Technology

The continuous evolution in computing and interfacing has been extended to develop multi-sensory experiences in many domains such as neurological, auditory, vision, and haptic domains. So far, only a few remarkable system approaches have been approved to be serving the taste sensation digitally. Although taste sensation is linked to the brain, there is a lack of optimal neurocomputing digital taste sensation systems. Our study provides a new neurocomputing method to digitally stimulate the sense of taste by electrical stimulation on the human tongue. We aim to link chemical stimulation and electrical stimulation in order to design an electronic interface for …

Machine Learning-Based Data And Model Driven Bayesian Uncertanity Quantification Of Inverse Problems For Suspended Non-Structural System, Zhiyuan Qin

All Dissertations

Inverse problems involve extracting the internal structure of a physical system from noisy measurement data. In many fields, the Bayesian inference is used to address the ill-conditioned nature of the inverse problem by incorporating prior information through an initial distribution. In the nonparametric Bayesian framework, surrogate models such as Gaussian Processes or Deep Neural Networks are used as flexible and effective probabilistic modeling tools to overcome the high-dimensional curse and reduce computational costs. In practical systems and computer models, uncertainties can be addressed through parameter calibration, sensitivity analysis, and uncertainty quantification, leading to improved reliability and robustness of decision and …

Energy Dissipation In A Sand Damper Under Cyclic Loading, Ehab Sabi

Civil and Environmental Engineering Theses and Dissertations

Various seismic and wind engineering designs and retrofit strategies have been in development to meet structures' proper and safe operation during earthquake and wind excitation. One such method is the addition of fluid and particle dampers, such as sand dampers, in an effort to reduce excessive and dangerous displacements of structures. The present study implements the discrete element method (DEM) to assess the performance of a pressurized sand damper (PSD) and characterize the dissipated energy under cyclic loading. The idea of a PSD is to exploit the increase in shearing resistance of sand under external pressure and the associated ability …

Backpack Effects On Two-Dimensional Gait Spatiotemporal And Kinematic Parameters, Nardo Rizaldy, Alvin Alvin, Wirawan Lingga, Ethan B.W. Goeij, F. Ferryanto

Journal of Mechanical Engineering Science and Technology (JMEST)

Loads could affect the body gait in various ways. Backpacks, sling bags, suitcases, and even trolleys could hugely affect human gait without us realizing it. The effects of these loads have been scientifically researched in biomechanics and sports science for the past few years. For instance, the comparison of walking with and without a backpack could easily reveal significant differences in body segments, which could be utilized for therapy and medicine development. The aim of this research is to determine the differences of the spatiotemporal kinematic parameters between a conventional human gait and a backpackloaded gait. Some parameters to be …

Investigate The Potential Renewable Energy Of Microalgae Spirulina Sp Using Proximate Analyzer, Sem-Edx, And Thermogravimetry, Yahya Zakaria, Sukarni Sukarni, Poppy Puspitasari, Nandang Mufti, Samsudin Anis, Anwar Johari

Journal of Mechanical Engineering Science and Technology (JMEST)

Microalgae Spirulina sp which has been cultivated by the Brackishwater Aquaculture Development Center, Situbondo Indonesia were tested for their potential energy performance using proximate analyzer, SEMEDX, and thermogravimetry. The proximate analyzer showed volatile matter (VM), fixed carbon (FC), moisture, ash content (AC), total sulfur of microalgae Spirulina sp 68.15, 12.57, 11.22, 8.06, and 0.67 (wt%, ar), respectively, and the gross calorific value (GCV) is 4971 kcal/kg (dry basis). SEM-EDX test showed the morphology and chemical content of Spirulina sp. The content of microalgae Spirulina sp is dominated by carbon (C) and oxygen (O), then followed by chlorine (Cl), sodium (Na), …