Engineering Science and Materials Commons^™

The Effect Of Nozzle Temperature, Infill Geometry, Layer Height And Fan Speed On Roughness Surface In Petg Filament, Doohan Taqdissillah, Aris Zainul Mutaqqin, Mahros Darsin, Dedi Dwilaksana, Nasrul Ilminnafik

Journal of Mechanical Engineering Science and Technology (JMEST)

3D printing is a process of making three-dimensional solid objects from a digital file process created by laying down successive layers of material until the object is created. Many filaments can be used in 3D printing, one of which is PETG (PolyEthylene Terephthalate Glycol). PETG is a modification of PET (PolyEthylene Terephthalate) with added glycol at a molecular level to offer different chemical properties that provide significant chemical resistance, durability, and excellent formability for manufacturing. This study aims to find the most optimal parameter of surface roughness of PETG with different parameters of nozzle temperature, infill geometry, layer height and …

Study On Predictive Maintenance Of V-Belt In Milling Machines Using Machine Learning, Reza Aulia Rahman, Mohammad Faishol Erikyatna, Achmad Fauzan Hery Soegiharto

Journal of Mechanical Engineering Science and Technology (JMEST)

Towards industry 4.0, monitoring the degradation of machine tools’ components becomes a key feature so that smooth productivity is achieved. To preserve the functionality and performance of the machine tools, proper maintenance activities must be planned and carried out. V-belt is important component in machine tools that transmits power from the electric motor spindle in order to machine to work and cut desired material properly. The purpose of this research is to develop a predictive maintenance system for v-belt milling machine Krisbow 31N2F using machine learning. The machine learning algorithm models using multiple and simple linear regression algorithm was developed …

True Stress-Strain Behavior Of Al-Based Cast Automotive Alloy Under Different Ageing Conditions And The Effect Of Trace Zr, Mashiur Rahman Shoummo, Akib Abdullah Khan, Mohammad Salim Kaiser

Journal of Mechanical Engineering Science and Technology (JMEST)

A thorough investigation has been carried out on the Al-12Si-1Mg-1Cu-1Ni automotive alloy considering different properties, specially mechanical properties associated with true stress and true strain with Zr addition of trace amount. A commercially available piston is melted to produce the alloy, and trace amount of Zr is added to make another. The base alloy along with the Zr added alloy had been applied to homogenization, solution treatment, quenching, and ageing in order to get the age-hardening response. The alloys have been heat-treated at 25 ºC, 200 ºC, and 300 ºC, respectively, for four hours for attaining the under, peak and …

Effect Of Graphene Addition On Bacterial Cellulose-Based Nanocomposite, Jibril Maulana, Heru Suryanto, Aminnudin Aminnudin

Journal of Mechanical Engineering Science and Technology (JMEST)

Bacterial cellulose (BC) is a widespread, low-cost biopolymer that has generally been produced from plants and biomass waste. A method for improving the range of applications for bacterial cellulose is adding graphene material. It has an outstanding feature that can increase the performance of nanocomposite materials. The research aims to observe the effect of graphene on the surface morphology, crystallinity, chemical bonding, and tensile strength of BC/CuO nanocomposite. For this study's synthesis, BC was synthesized by fermenting pineapple peel extract for 10 to 14 days. The produced BC was crushed, homogenized with a nano homogenizer machine, and filtered. Filtered BC, …

Passive Prosthetic Ankle Design Based On Indonesian Anthropometry, Wahyu Dwi Lestari

Journal of Mechanical Engineering Science and Technology (JMEST)

Foot prosthesis is a replacement for the foot to overcome activity limitations due to disease, birth defects, accidents, or amputations. Many foot prosthetics have been developed in recent years to treat patients. However, prostheses on the market today have drawbacks, including their high price, lack of comfort, stiff ankles, and low durability. The main objective of this study is to develop an existing ankle-foot prosthesis design that approximates the resemblance of a human foot according to the anthropometry of Asians, especially Indonesians. This study contains the design of a prosthetic foot with a skin design model and a support core. …

Surface Quality Of Fe, Ni And Cr Added Hyper-Eutectic Al-Si Automotive Alloys Under Up-Milling And Down-Milling Operation, Akib Abdullah Khan, Mashiur Rahman Shoummo, Mohammad Salim Kaiser

Journal of Mechanical Engineering Science and Technology (JMEST)

Effect of the elements Fe, Ni, and Cr on the surface quality under machining of hyper-eutectic aluminiumbased Al-Si automotive alloys has been carried out as the elements improve the properties of this alloy. Machining is done on a horizontal type milling machine using a high-speed steel slab milling cutter in dry condition. Only the cutting speed varies throughout the experiment, while the machining feed and depth of cut remain fixed. The experimental results show that the addition of these alloying elements increases the roughness and hardness specially due to formation of Fe-rich intermetallic ��-����5��������. However, the needle-like ��-����5�������� has been …

Effect Of Variation Of Sic Mass Fraction On Mechanical Properties Of Al-Sic Composite Using Stir Casting Method, Sumarji Sumarji, Naufal Fardio Albajili, Mahros Darsin, Rahma Rei Sakura, Andi Sanata

Journal of Mechanical Engineering Science and Technology (JMEST)

Al-SiC is a composite composed of AA6061 as a matrix and SiC as a reinforcement particle. The variation of mass added will affect the mechanical properties of the composite because Al-SiC is hardenable, which means that its mechanical properties can be improved by adding the reinforcement component. However, an excessive portion of SiC leads to a decrease in mechanical properties. The purpose of this study was to find the optimal composition of the addition of SiC into the aluminium matrix to gain maximum tensile strength and hardness. The mass fraction variation that would be used in this composite was the …

Effect Of Homogenization Pressure On Bacterial Cellulose Membrane Characteristic Made From Pineapple Peel Waste, Muhamad Muhajir, Heru Suryanto, Yanuar Rohmat Aji Pradana, Uun Yanuhar

Journal of Mechanical Engineering Science and Technology (JMEST)

Many studies were conducted to maintain the environment by reducing the waste, especially pineapple peel waste. This study aims to explore the effect of various pressure of the homogenization process on bacterial cellulose membrane surface morphology and structure produced using extract of pineapple peel waste. The methods include the preparation of pellicle samples from the product of the fermentation process of Acetobacter xylinum using a medium from the extract of pineapple peel waste. Bacterial cellulose pellicles were crushed using a blender. Mashed bacterial cellulose pellicle was homogenized in High-Pressure Homogenizer with pressure variation of 150 bar, 300 bar, 450 bar, …

Machine Vision For The Various Road Surface Type Classification Based On Texture Feature, Susi Marianingsih, Widodo Widodo, Marla Sheilamita S. Pieter, Evanita Veronica Manullang, Hendry Y. Nanlohy

Journal of Mechanical Engineering Science and Technology (JMEST)

The mechanized ability to specify the way surface type is a piece of key enlightenment for autonomous transportation machine navigation like wheelchairs and smart cars. In the present work, the extracted features from the object are getting based on structure and surface evidence using Gray Level Co-occurrence Matrix (GLCM). Furthermore, K-Nearest Neighbor (K-NN) Classifier was built to classify the road surface image into three classes, asphalt, gravel, and pavement. A comparison of KNN and Naïve Bayes (NB) was used in present study. We have constructed a road image dataset of 450 samples from real-world road images in the asphalt, gravel, …

Gasohol Engine Performance With Various Ignition Timing, Hendry Y. Nanlohy, Suyatno Suyatno, Helen Riupassa, Marthina Mini, Trismawati Trismawati, Mebin Panithasan

Journal of Mechanical Engineering Science and Technology (JMEST)

Experimental research has been conducted on the effect of ignition timings on the characteristics and performance of gasohol engines such as power, torque, specific fuel consumption, and thermal efficiency. The fuel used in this research is pure gasoline and a mixture of 50% bioethanol (BE50). The results show that the ignition timing that gives the maximum effect occurs at the top and bottom dead points of 9 degrees for gasoline and 12 degrees for BE50 fuel. Furthermore, the maximum power is obtained at 6,500 rpm, and at an ignition time of 12 degrees BTDC the maximum power generated is 4.63 …

Dynamic Response Of Elastic Two-Story Steel Moment Frame Scaled Structure Equipped With Viscous Dampers, Garrett L. Barker, Alexander L. Poirier

Architectural Engineering

The authors of this report are Architectural Engineering undergraduate students at California Polytechnic State University, San Luis Obispo. Damping is a complex, experimentally derived value that is affected by many structural properties and has a profound effect on the dynamic response of structures. Deducing the inherent damping of a steel moment frame and affecting the damping ratio with viscous dampers are two topics explored in this paper. Dampers are commonly implemented in resilient structures that perform better in a design basis earthquake, reducing the seismic cost and downtime. Undergraduate coursework does not delve into the factors that affect damping and …

Method Of Embedded Imperfections For The Direct Simulation Of Deformation Instabilities In Film-Substrate Structures, Siavash Nikravesh Kazeroni

Mechanical Engineering ETDs

In this dissertation, a novel finite-element methodology called “embedded imperfections” is proposed and employed for computationally simulating various types of deformation instabilities observed in film-substrate structures subjected to mechanical loading. The approach involves the incorporation of elements having distinctive material properties within the film-substrate interface. One can interpret this practice as a deliberate distribution of material defects within the numerical model. It has been shown that embedded imperfections not only can trigger the onset of instability, but also can lead to “direct” simulation of deformation instability problems in that primary and subsequent instability modes can all be captured in a …

Wear Property Of Machined Ultra High Molecular Weight Polyethylene (Uhmwpe) Acetabular Liner Product With Cnc Milling, W D. Lestari, A T. Danaryanto, A Nugroho, R Ismail, J Jamari, A P. Bayuseno

Journal of Mechanical Engineering Science and Technology (JMEST)

UHMWPE has been used as a cushion in artificial hip joint for the last decades. The reliability of the components of a hip joint implant can be achieved by understanding their wear behavior. This study observed the tribological performance of the UHMWPE acetabular liner manufactured with a CNC milling machine on the femoral head made of SS 316L. Materials commonly used for tribo pairs in hip joint replacement. The wear tests were performed on a hip joint simulator in dry condition. The wear test is carried out by applying a constant load of 800N. Before and after the wear test, …

Characterization Of Bacterial Nanocellulose - Graphite Nanoplatelets Composite Films, Bili Darnanto Susilo, Heru Suryanto, Aminnudin Aminnudin

Journal of Mechanical Engineering Science and Technology (JMEST)

Bacterial cellulose (BC) was synthesized from pineapple peel extract media with addition of fermentation agent bacteria Acetobacter xylinum. BC was disintegrated from the pellicle into bacterial nanocellulose (BNC) by using a high-pressure homogenizer (hph) machine, which has a three-dimensional woven nanofibrous network. The synthesis of composite films started when BNC, graphite nanoplatelets, and cetyltrimethylammonium bromide (CTAB) were homogenized using an ultrasonic homogenizer then baked on a glass mold at a temperature of 80 degrees Celcius for 14h. A scanning electron microscope (SEM) was used to analyze its morphology. X-Ray diffraction spectra were used to analyze the composite films structure. The …

Design Of Shielded Metal Arc Welding Parameters For Optimum Tensile Strength Using Taguchi Method, Moh. Dedy Setiawan, Yanuar Rohmat A. P. Pradana, Suprayitno Suprayitno

Journal of Mechanical Engineering Science and Technology (JMEST)

Shielded Metal Arc Welding (SMAW), an arc welding process, is widely used in applications. In practice, SMAW is widely applied to the welding process on hollow square pipe. Performance expected from this welding is the tensile strength of weld joint. The tensile strength is influenced by parameters process which have possibility for an optimization process to become ‘robust’. Robust is a design which less sensitive to the effect of uncertain quantities or noise factors. Taguchi method is the most efficient optimization method which accommodates the noise factors effect and requires less experiment. This study is focusing on optimizing the welding …

Comparative Studies On Combustion Characteristics Of Blended Crude Jatropha Oil With Magnetic Liquid Catalyst And Dex Under Normal Gravity Condition, Hendry Y. Nanlohy

Journal of Mechanical Engineering Science and Technology (JMEST)

A comparative study on the combustion characteristics of a single droplet fueled by DEX, crude jatropha oil (CJO), and a mixture of CJO with a magnetic liquid catalyst of rhodium trisulfate has been carried out under normal gravity conditions. The high viscosity of crude jatropha oil makes it difficult to burn under normal conditions (room temperature and atmospheric pressure), therefore the addition of a magnetic liquid catalyst rhodium trisulfate is needed to improve the properties of crude jatropha oil. As a catalyst, rhodium trisulfate has the potential to improve combustion performance while improving the physical properties of crude jatropha oil …

Effect Of Variations In Pyrolysis Reactor With Glass Wool Equipped And Without Glass Wool On The Weight Of The Oil Produced, I Gusti Ngurah Nitya Santhiarsa

Journal of Mechanical Engineering Science and Technology (JMEST)

Currently, plastic waste is a very serious threat because plastic waste pollution can harm all living things around and also harm the environment. The increasing volume of plastic waste is due to the lack of processing technology, so that the volume of plastic waste is increasing day by day. Plastic is a material that is difficult to decompose because it is non-biodegradable. One application of plastic waste processing technology offered in this study is to use the pyrolysis principle. Pyrolysis is a method of converting plastic into fuel oil through a thermal decomposition process without the use of oxygen. The …

Implementation Of Internet Of Things (Iot) In A Plastic Blow Moulding Machine And Its Performance Measurement, Muhammad F. Faqih, Mahros Darsin, Aris Z. Muttaqin, Danang Yudistiro

Journal of Mechanical Engineering Science and Technology (JMEST)

Efficiency and effectiveness are indispensable things in the production process. Accurate use of existing resources and the shorter cycle time of production are of particular concern to optimize the production process. This research aims to implement automation to a conventional blow molding. An advanced attempt was carried out to use the Internet of Things (IoT) to increase its efficiency while maintaining the quality of the products. The use of the nodeMCU microcontroller and the blynk application allows the operator to operate the machine without having to come into or having direct contact with the machine. The performance of automation and …

Study Of Methanol And Ethanol Absorption On Vacuum Temperature Of Adsorption Cooling Machine Adsorption Cycle, Jhon Sufriadi Purba, Jandri Fan Ht. Saragi

Journal of Mechanical Engineering Science and Technology (JMEST)

Cooling machines are currently being used more and more in accordance with technological advances and increasing living standards. Common uses are for preserving food, air conditioning, cooling beverages, for making ice cubes, and others. The need for cooling systems in remote areas for various needs such as preservation or storage of food ingredients is felt to be increasing, while the existing conventional cooling systems cannot necessarily be used because not all remote areas have electricity networks, so a simple adsorption cooling system is an alternative for solving problems. A cooling system needs in remote areas like this. The purpose of …

Spray Characteristics At Preheating Temperatur Of Diesel-Biodiesel-Gasoline Fuel Blend, Moch. Miftahul Arifin, Nasrul Ilminnafik, Agus Triono

Journal of Mechanical Engineering Science and Technology (JMEST)

Technological developments in diesel engines require improvements to the fuel injection system to meet the criteria for economical, high-power and efficient combustion and meet environmental regulatory standards. One method that has a lot of interest is changing the characteristics of the fuel, with the aim of producing optimal combustion. Spray characteristics have a big role in determining the quality of combustion in diesel engines. A good spray can improve the quality of fuel atomization and the homogeneity of the air-fuel mixture in the combustion chamber so that it can produce good engine performance and low emissions. This study aims to …

Electrochemical Corrosion Properties Of Ternary Al And Quaternary Zr Added Bell Metal In 0.1m Nacl Solution, Sakib Al Razi Khan, Mohammad Ashfaq Hossain, Maglub Al Nur, Mohammad Salim Kaiser

Journal of Mechanical Engineering Science and Technology (JMEST)

The electrochemical corrosion property of ternary Al and quaternary Zr added Bell metal in 0.1M Sodium Chloride solution has been experimentally conducted at room temperature. Electrochemical impedance spectroscopy (EIS) method and Potentiodynamic polarization technique are used to carry out the electrochemical investigation. Microhardness test is also conducted for all three alloys and it reveals that Al addition increases the hardness of bell metal due to the formation of different intermetallic precipitates of Cu and Al. Optical Micrograph as well as Scanning Electron Micrograph have also been studied to characterize their surface condition. It is found that Zr addition refines the …

Evaluating Storage And Effective Moduli Of In Situ Polymerised And Melt Extruded Pa6 Graphite (G) Composites, Muneer Umar, Michael Ikpi Ofem, Auwal Sani Anwar, Muhammad Murtala Usman

Journal of Mechanical Engineering Science and Technology (JMEST)

Four PA6/graphite (G) composites systems were made. Two using in situ polymerisation equivalent in mixing strain and two systems melt extrusion of equivalent processing strain. The effective modulus of the carbons, room temperature storage modulus and storage modulus at 80 ⁰C were evaluated. The composite/unfilled PA6 ratios at E25 and that at E80 for the in situ polymerised system IG 40/10 are 1.37 and 1.63, respectively. For the in situ polymerised system IG 20/20, the same were 1.96 and 2.28, respectively. For the melt-extruded systems, G 100/6 had the best E25 ratio of 1.67 and E80 of 2.03, whereas the …

The Effect Of Thickness And Type Of Material On The Sheared Edge Characteristics Of Keychain Cranioplasty Plate Blanking Product Using Eccentric Press Machine, Didin Zakariya Lubis, Lea Rachmat Indrasepta, Redyarsa Dharma Bintara, Rizky Ramadhan, Agung Budi Darmawan

Journal of Mechanical Engineering Science and Technology (JMEST)

Keychain cranioplasty plate product has the potential to be produced using the blanking process because it is faster, low-cost, and requires low-energy consumption compared to other mechanical operations. This research aimed to find the effect of material thickness and type on the sheared edge characteristics of keychain cranioplasty plate using the blanking process to meet the international health standard. Experimental research conducted using an eccentric press machine with 40 tons capacity. This research’s test material parameters of titanium (Ti-6AL-4V) and stainless steel (SS-316L) were the 0.5 mm, 0.6 mm, and 0.8 mm thickness with a maximum blanking velocity of 3000 …

Effect Of Dcrp And Dcsp Polarity On The Depth Of Penetration Of Smaw On Low Carbon Steel Astm A36 Using E7018 Electrode, Ma'mun Hidayat, Helleni Febnesia, Sulaeman Deni Ramdani

Journal of Mechanical Engineering Science and Technology (JMEST)

The study aims to determine the level of penetration depth using SMAW (Shielded Metal Arc Welding) Process based on the polarity type of DCRP (Direct Current Reverse Polarity) and DCSP (Direct Current Straight Polarity). This research used ASTM A36 low carbon steel plate with thickness of 6 mm and length of 200 mm, Electrode E7018 LB-52-18 ∅ 3.2 mm, and with current parameters of 90 A, 100 A, 110 A, 120 A and 130 A and 70 ° welding arc angle. The method used the experimental research. Data collection techniques applied direct observation techniques and descriptive statistical data analysis techniques. …

Camshaft Failure Simulation With Static Structural Approach, Riduwan Prasetya, Andoko Andoko, Suprayitno Suprayitno

Journal of Mechanical Engineering Science and Technology (JMEST)

A failure happens within the camshaft of the minibus when the vehicle is in utilize. The camshaft was a fracture within the bearing between the primary cylinder exhaust valve and the second cylinder suction. This simulation aims to find the causes of camshaft failure utilizing the finite element method with a static structural approach, including simulations of deformation, strain, stress, fatigue life (stress-life and strainlife), and cracks. The method used in this paper is the finite element method with a static structural approach by ANSYS software. The camshaft material is a gray cast iron designed using Solidworks. Pre-processing includes meshing …

The Effect Of Multi-Extrusion Process Of Polylactic Acid On Tensile Strength And Fracture Morphology Of Filament Product, Muhamad Syaifuddin, Heru Suryanto, Suprayitno Suprayitno

Journal of Mechanical Engineering Science and Technology (JMEST)

Polylactic acid (PLA) is one of the most used materials in FDM 3D Printing. Large-scale consumption of PLA on an industrial scale could cause environmental and efficiency problems. Thus, PLA waste and industry waste need to be recycled to limit excessive waste. This study aimed to investigate the change in mechanical property, morphology, and structure of mechanically recycled PLA. Recycling was performed 12 times using the extrusion process with an extrusion temperature nozzle of 170°C. The SEM, structural analysis, and amorphous-crystalline analysis used XRD. The results showed a gradual decrease of tensile strength from each recycle with a total of …

Influence Of Extracellular Matrix Stiffness And Topography On Neuronal Cell Behavior And Neurite Outgrowth, Mohan Yasodharababu

Graduate Theses and Dissertations

The focus of regeneration therapy for traumatic brain injuries and Alzheimer's disease is on the promotion and growth of neuronal cells. In vitro research attempts to improve this by modifying the stiffness and topography of the extracellular matrix (ECM). However, the limitations of in vitro experiments make it difficult to control the individual factors influencing neuronal cell growth. A computational model can be used to decouple individual factors and study them individually to gain a better understanding of the mechanics between the neuronal cell and ECM, which will aid in the design of in vitro experimental studies.

This study develops …

Fluid-Structure Interaction Of Nrel 5-Mw Wind Turbine, Mohamed Sayed Elkady Abd-Elhay

Theses and Dissertations

Wind energy is considered one of the major sources of renewable energy. Nowadays, wind turbine blades could exceed 100 m to maximize the generated power and minimize produced energy cost. Due to the enormous size of the wind turbines, the blades are subjected to failure by aerodynamics loads or instability issues. Also, the gravitational and centrifugal loads affect the wind turbine design because of the huge mass of the blades. Accordingly, wind turbine simulation became efficient in blade design to reduce the cost of its manufacturing. The fluid-structure interaction (FSI) is considered an effective way to study the turbine's behavior …

A Single-Stage Passive Vibration Isolation System For Scanning Tunneling Microscopy, Toan T. Le

Master's Theses

Scanning Tunneling Microscopy (STM) uses quantum tunneling effect to study the surfaces of materials on an atomic scale. Since the probe of the microscope is on the order of nanometers away from the surface, the device is prone to noises due to vibrations from the surroundings. To minimize the random noises and floor vibrations, passive vibration isolation is a commonly used technique due to its low cost and simpler design compared to active vibration isolation, especially when the entire vibration isolation system (VIS) stays inside an Ultra High Vacuum (UHV) environment. This research aims to analyze and build a single-stage …

The Effect Of Guide Vane Opening Variations And Total Blades On Cross Flow Turbine Performance Using Computational Fluid Dynamic, Muhamad Akbar Navis, Heru Suryanto, Putut Murdanto

Journal of Mechanical Engineering Science and Technology (JMEST)

Indonesia is an agrarian country that continuously produces water, so it has the potential to develop a hydroelectric power plant. Computational Fluid Dynamic (CFD) application could be used to be an economical, quick, and efficient approach to improve the engineering design and turbine performance. This research aimed to find the effect of guide vane opening variations and total blades on cross-flow turbine performance using CFD simulation. This research used experimental modelling method with ANSYS program for turbine design with 22, 24, and 26 turbine blades and guide vane opening variations of 12°, 16°, 20°, 24°, and 36°. The data were …