Engineering Science and Materials Commons^™

Ceramic Waste As Sustainable Material In Self-Compacting Concrete: Experimental Study And Ann Predictive Modeling, Abderrezak Bouziane, Houssam Slimanou, Mohamed Amin Bouzidi, Nedjima Bouzidi

Journal of Sustainable Construction Materials and Technologies

Recycling of ceramic waste in the construction sector is a promising option for reducing the environmental impacts of the concrete industry. The main objective of this study is the elaboration of a solid predictive model for ceramic waste based self-compacting (SCC) concrete properties, using artificial neural networks (ANN). This further, reduces its environmental impact without compromising satisfactory performance. An experimental approach was adopted with different substitution ratios: 0 to 30 wt% and particle sizes ranging from 3-8 mm and 8-15 mm. Tested properties of modified SCC as compressive strength at 7 and 28 days (fc7, fc28), spread (L), sieve stability …

Comparative Study On The Performance Of Ggbs, Uggbs, And Rha-Incorporated Cement Mortar Mixes, Devansh Goel, Sudarshan D. Kore

Journal of Sustainable Construction Materials and Technologies

The environmental footprint of cement production has accelerated the pursuit of sustainable alternatives in the construction industry. Supplementary cementitious materials (SCMs), particularly those derived from industrial and agricultural waste, offer a promising approach to reducing cement consumption while maintaining performance. This study evaluates the fresh and mechanical behavior of binary, ternary, and quaternary cementitious mortar blends incorporating ground granulated blast-furnace slag (GGBS), ultrafine GGBS (UGGBS), and rice husk ash (RHA) as partial replacements for cement. A total of 32 mortar mixes were designed with water-to-binder (w/b) ratios ranging from 0.3 to 0.5 and varied replacement levels of RHA (0-20%), GGBS …

Functional Biopolymers Applied To Sustainable Technologies In The Environment And Healthcare, Fengjie He

UNLV Theses, Dissertations, Professional Papers, and Capstones

Biodegradable polymeric materials (biopolymers) are naturally derived materials known for their excellent biocompatibility, biodegradability, sustainability, and versatile chemical functionality. They have attracted increasing attention in various applications as alternative to synthetic materials ranging from food packaging to tissue engineering. Meanwhile, with intrinsic advantages, biopolymers have also emerged as promising materials in addressing contemporary challenges in both biomedical and environmental fields. Motivated by the significant potential of biopolymers and the growing need for sustainable materials, my research focuses on the design and engineering of biodegradable polymers with novel modification methods and application directions. In this work, two representative biopolymers are selected: …

Application Of Distributed Fiber Optic Sensing (Dfos) For Monitoring Asphalt Pavement Strains Under Accelerated Loading Conditions, Sebastian Morales

Open Access Theses & Dissertations

This thesis presents a study on the application of Distributed Fiber Optic Sensing (DFOS) technology for detecting pavement's strain response with high spatial resolution. Using a Rayleigh-based optical frequency domain reflectometry (OFDR) system, DFOS sensors were calibrated and embedded in full-scale asphalt slabs subjected to accelerated loading using a Model Mobile Load Simulator 3 (MMLS3). Calibration of the DFOS sensors was conducted using a three-point bending flexural test with known load conditions and reference strain gauges to validate theoretical and numerical models. The results demonstrate DFOS's capability to detect pavement response under static and dynamic loading, as well as changes …

Investing Hysteresis In Floodplain Dynamics Of Lakes In The Middle St. Johns River Using Sentinel-1 Sar Imagery, Keenan Hubbard

Doctoral Dissertations and Master's Theses

Floodplain dynamics are often complex, with hysteresis potentially affecting the temporal relationship between flood stage and flood extent during subsequent inundation phases. This study leverages Sentinel-1 synthetic aperture radar (SAR) imagery to map flood extent in the Middle St. Johns River Lake floodplains and examine the presence of hysteresis during flood events. SAR scenes corresponding to river gauge readings were analyzed from the rising and falling limbs of a flood hydrograph. By comparing these flood maps, we assess differences in inundated areas at equivalent water levels during each stage of the flood event. The findings aim to enhance flood monitoring …

The Utilization Of Basic Oxygen Furnace Slag As Fine Aggregates In Concrete: Physical, Mechanical, And Durability Properties, Hakan Ozkan

Journal of Sustainable Construction Materials and Technologies

This study examines the feasibility of using basic oxygen furnace slag (BOFS) as an alternative to fine crushed limestone aggregate in concrete. BOFS is sourced from two steel production facilities in Türkiye, designated as I-BOFS and E-BOFS. The experimental results showed that as the E-BOFS aggregate replacement ratio increased, the water-to-cement (w/c) ratio increased to maintain the target workability. The concrete mixtures incorporating E-BOFS exhibited consistent reductions in the compressive strength with an increase in the BOFS ratio. At the same time, I-BOFS maintained higher compressive strength, with only minor losses up to 80% of the substitution ratio. Flexural strength …

Development Of A Self-Cured Alkali-Activated Mortar, Kübra Ekiz Barış

Journal of Sustainable Construction Materials and Technologies

Alkali-activated mortars (AAM) can be produced with self-curing (SC), which supplies internal moisture to accelerate alkaline-activation reactions. The aim of using SC is to make AAMs with an early-age strength without any additional curing energy consumption and higher CO2 emissions, and to obtain in-situ practical advantages that enable the large-scale application of AAMs. The previous study produced natural pozzolan-based AAMs by applying energy-intensive heat (HC), microwave (MWC), and hybrid (HC+MWC) curing. This study investigates alternative curing regimes that reduce production energy without compromising material properties. The impacts of air curing (AC), water curing (WC), and SC on the properties were …

Naoh Molarity Effect On Mechanical And Hydrochloric Acid Resistance Of Geopolymer Mortar Based On Slag, Mahmoud Ziada, Zahraa Mohammed Kamil Al-Mayali

Journal of Sustainable Construction Materials and Technologies

The present research investigates the influence of different sodium hydroxide (NaOH) molarities on the mechanical characteristics and hydrochloric acid (HCl) resistance of geopolymer grouts manufactured from ground granulated blast-furnace slag (GGBS). Geopolymer mortars have attracted interest as sustainable substitutes for traditional cementitious materials due to their advantageous environmental effects and enhanced durability features. This study involved the fabrication of geopolymer mortar specimens by altering the NaOH molarity (M) from 6 M to 14 M. The mechanical and physical qualities were assessed using compressive strength, capillary water absorption, flexural strength, slump flow, and ultrasonic pulse velocity (UPV) tests. Subsequently, the geopolymer …

Effect Of Expanded Perlite And Exfoliated Vermiculite Aggregate Additives On Water Vapor Permeability Performance Of Cement-Based Lightweight Mortars, Lütfullah Gündüz, Şevket Onur Kalkan

Journal of Sustainable Construction Materials and Technologies

Vapor diffusion is the movement of water vapor molecules through porous materials such as wood, insulation products, and lightweight wall elements due to differences in vapor pressure. Vapor retarders are used to control vapor diffusion through wall sections and surfaces. All building materials provide some resistance to vapor diffusion, and the amount of resistance varies depending on the material's properties. These properties can vary with relative humidity and moisture content, age, temperature, and other factors. Vapor resistance is usually expressed using the inverse term of ``vapor permeability,'' which is the relative ease of vapor diffusion through a material. Water vapor …

Rubber-Modified Self-Compacting Mortar: Evaluating Setting Time And Strength Development, Navvar Makansi, Süleyman Ipek, Erhan Güneyisi

Journal of Sustainable Construction Materials and Technologies

The influence of using crumb rubber (CR) obtained from the second scraping of used tires as fine aggregate in manufacturing self-compacting mortar (SCM) was investigated experimentally in this study. To explore this, natural fine aggregate in SCM mixes was partially replaced with CR at levels ranging from 5% to 25% by total fine aggregate volume. Two mix series, one with a total binder of 500 kg/m3 and the other with a 540 kg/m3 binder, were designed at water-to-binder ratios of 0.40 and 0.33. Ordinary Portland cement (80% by weight) and fly ash (20% by weight) were used to manufacture mortars. …

Smart Traffic Management At Intersections, Gezim Hoxha, Piotr Gorzelanczyk, Rame Likaj, Shaban Thaqi, Flori Cikaqi

Journal of Sustainable Construction Materials and Technologies

Effective traffic control methods, whether at intersections or other nodes within the road network, play a critical role in ensuring traffic quality and safety. An inappropriate choice of traffic control techniques or poorly optimized light signal programming at intersections often leads to unsatisfactory service levels. This study specifically addresses the issues related to intersections controlled by traffic lights. It aims to identify the key factors influencing the regulation and programming of traffic lights, with a focus on using different microcontrollers, particularly the Raspberry Pi. The primary objective of this research is to develop a methodology and an adapted programming approach …

Identification Of Barriers And Drivers In The Adoption Of Sustainable Construction Practices In The Turkish Construction Industry: Exploratory Factor Analysis, Tülay Çivici, Mustafa Serhan Ünlütürk

Journal of Sustainable Construction Materials and Technologies

Although the importance of sustainability in the construction industry has been emphasised by many researchers and endorsed by many authorities, it is clear that the practices in the industry still need to be improved. The primary issue for adopting sustainable practices in the construction industry is identifying the barriers and drivers. For this reason, the study analysed the literature to identify the critical barriers and incentives for adopting sustainable practices in the construction industry. In light of the information from the literature, the necessary barriers and motivators in adopting sustainable practices in the construction industry were determined, and a questionnaire …

Synergistic Effect Of Alccofine As Partial Replacement Of Cement And M-Sand As Sand Substitution In Concrete For The Assessment Of Mechanical And Microstructural Properties, Yellinedi Madhavi, R.S. Ravichandran, J. Saravanan, N. Venkatasairam Kumar

Journal of Sustainable Construction Materials and Technologies

Using supplementary cementitious materials (SCMs) and traditional binder mass has revolutionized concrete production technology in the building industry. This study examines how Alcofine-1203 affects the microstructure and mechanical characteristics of concrete. The mechanical qualities of the mixtures were evaluated using six different mixes prepared for each M25 and M40 Grade. In the proposed mixes, cement is substituted with alccofine at 0 to 25% and M-Sand as fine aggregate. The Compressive strength and ultrasonic pulse velocity were assessed after 3, 7, 14, 28, 56, and 90 days of curing, and split tensile strength and flexure strength were evaluated after 28 and …

Sustainable Modification Of Stone Column Technique With Polyethylene Terephthalate (Pet) Plastic For Strengthening The Expansive Clay, Ng Jun Shen, Muzamir Hasan

Journal of Sustainable Construction Materials and Technologies

This research investigated the modification of stone column application by the association of PET plastic as a coarse aggregate material for sustainable material replacement. Clay soil improvement with a granular material fabricated column substantially affected its soil-bearing capacity. Subsequently, it avoided severe problems such as soil settlement and structural instability. Previous studies have mentioned the function and alteration of stone columns using materials like bottom ash and fly ash. Still, no attention has been paid to the utilization of PET plastic for this area. This study examined the feasibility and reliability of materials, PET plastic, and kaolin clay S300 before …

Effect Of Reinforcement Thickness And Content On The Properties Of Compressed Earth Blocks, Salah Eddine Mokeddem, Abdelmadjid Hamouine, Rabia Abdeldjebar, Atef Hamaidi

Journal of Sustainable Construction Materials and Technologies

This study explores the mechanical, hygroscopic, and thermal behavior of stabilized and unstabilized compressed earth blocks (CEB) by incorporating date palm wood chips (DPWC) as a natural fiber additive. The investigation covers a range of DPWC thicknesses (1 mm, 2 mm, 3 mm) and content variations (0% to 1% by weight), focusing on the interaction between the bio-based reinforcement and the stabilized soil matrix, which is stabilized with 10% white Portland cement. The mixtures were compressed at a pressure of 5 MPa using a hydraulic press, providing a detailed examination of how these parameters impact the structural integrity and functional …

Ultimate Limit State Reliability-Based Approach Life Prediction Of An Existing Frame Structure Under Seismic Hazard In Indonesia, Wira Herucakra, Luh Putri Adnyani

Journal of Materials Exploration and Findings

Life assessment integrated with Structural Integrity Management (SIM) has been implemented in the oil and gas industry for the past decade to maintain the integrity and safety of an in-service structure used to support hydrocarbon exploration, production, and processing activity. Current structural life assessment, as ruled by the American Petroleum Institute (API), uses a fatigue-based approach for offshore structures subjected to wave loading. As the general principle of SIM is not limited to offshore structures, this study offers an alternative life assessment method for onshore structures, especially steel frame structures subjected to earthquake loads. Reliability analysis, combined with the effect …

Design And Optimization Of Aquaculture Gear: Development Of A Cage-Integrated Reeling Mechanism For Oyster Farming, Felicity Bryant

Honors Theses

This project encompasses the design, fabrication, and testing of a cage-integrated reeling system aimed at reducing the physical labor required in oyster aquaculture at Bama Bay Oyster Farm, the last operational oyster farm in Mobile Bay. The proposed system includes two primary components: lightweight, modular oyster cages and a dual-winch reeling device for automated retrieval. Three cage prototypes—rectangular, oval, and hexagonal—were evaluated for structural performance and fabrication feasibility. The oval design was ultimately excluded due to practical fabrication limitations. The rectangular and hexagonal designs were fabricated using recycled materials and tested under the most extreme environmental conditions derived from years …

Microwave Ore Pre-Treatment Review And Process Flowsheet Conceptualization, Baker F. Giyani

Tanzania Journal of Engineering and Technology (TJET)

The global demand for mineral commodities has increased dramatically over the years, and this is largely due to several factors, including technological advancements, industrialization, and a rise in population. Further, the demand keeps increasing because the ore being mined is becoming more complex, and the feed grade is declining over the years, prompting the need for innovative technologies to treat such ores more efficiently. Microwave ore pre-treatment is one of the potential technologies that can be employed to improve process performance. This is possible because ores are composed of both good-microwave heaters and poor microwave heaters, which creates thermal stresses …

Dust Analyses In Ventilation Ducts, Karolina Vyhlidalova, Petr Vlček, Olga Rubinová, Jiří Bernard

Journal of Sustainable Construction Materials and Technologies

The paper describes the importance of monitoring the dust in the atmosphere of human life. It deals with the issue of dust in air ducts, approaching the methods that can be used to detect the amount of dust. For conditions for buildings in the Czech Republic there is created the methodology of quantitative and qualitative evaluation of dust sediment for the needs of HVAC and other building surfaces. The scale for visual evaluation was created and it has been elaborated the assessment of kind of particles contained in dust.

Assessment Of Long Time Approximation Equation To Determine Thermal Conductivity Of High Porous Materials With Nss Probe, Hussein Humaish, Bastien Ruet, Laurent Marmoret, Hassen Beji

Journal of Sustainable Construction Materials and Technologies

Recent economic changes have increased the focus on energy conservation in buildings. Improve insulation represents one of the biggest challenge to save energy. The TP02 Huksefux® Non Steady State Probe (NSSP) has been used to determine the thermal conductivity of the building insulation materials. Usually, the long term approximation equation (linear form) is applied to determine the thermal conductivity when using hot wire techniques. Long term approximation has been successfully used to characterize glycerol: a fluid which doesn’t present contact resistance and porosity. But, an S-shaped appears for more porous materials. So to generalize the possibility of using this method, …

Innovative Design Methodology For Durable Open-Graded Friction Course Asphalt Mixtures, Anas Abualia

LSU Doctoral Dissertations

Open-graded friction course (OGFC) is a thin asphalt mixture surface layer with a high percentage of coarse aggregates and high interconnected air voids, which provides improved skid resistance, visibility, and decreased pavement-tire noise. However, construction personnel at DOTD reported that conventional OGFC mixtures have short service life (raveling distress). Further, their structural contribution to the pavement structure is commonly neglected and designed only for functionality purposes.

The objective of this study was to develop a rational mix design methodology to improve the durability of OGFC asphalt mixtures. Specific objectives are to: (1) conduct a rheological and chemical characterization of polymer-, …

Impulse, Spring 2025, Jill Fier, Micayla Standish, Jerome J. Lohr College Of Engineering

Impulse (Jerome J. Lohr College of Engineering Publication)

2 | Faculty, Staff Honored
4 | The State of Lithium
6 | 100 Years of Ag and Biosystems Engineering
8 | Major Milestones
12 | Distinguished Engineer Geldert-Murphy
14 | Distinguished Engineering Heitkamp
16 | By the Numbers
18 | Space Grant Consortium at SDSU
20 | Healthcare Systems Engineering Program
22 | Ridgway Three-Peat
23 | Aerospace Club Launches
24 | Power and Energy Scholarships
25 | More Take Part in Nasa Challenges
26 | Weber Recognized as Student Leader
30 | Wild Hare Racing Ready
32| Sebern’s Success as Sole Operator
34 | Meink: From Prairie to …

Preserve Your Hma Pavements From The Start, Tim Zahrn, Andrew Eicher

Purdue Road School

This presentation will review sustainable preservation treatments and their application timeline to extend the life of asphalt pavement. We will discuss how pre-preservation treatments like a void reducing asphalt membrane, early-life preservation treatments such as rapid penetrating emulsion, and topical rejuvenators can reduce future maintenance and delay reconstruction. We will also look at mid-life treatments, such as micro-surfacing, fit into a preventative maintenance preservation plan. And finally cover end of life cold pavement recycling alternatives.

Intelligent Turning Cyber-Physical Systems Modeling Using Sysml, Prithbey Raj Dey, David Lee Enke, Mario F. Buchely

Engineering Management and Systems Engineering Faculty Research & Creative Works

Cyber-Physical Systems (CPS) support industrial automation that incorporates people, hardware, signal, computation, and control using networking to achieve desired results. The complex automated CPS design demands a standard and comprehensive approach to appropriately identify the system requirements, define the architecture, and model the relationships among the software and hardware components. Systems Modeling Language (SysML) provides the capability for a comprehensive modeling to capture the desired design requirements in the systems architecture. SysML enables performance estimation of the model by analyzing constraints while identifying interactions among the components through various behavioral diagrams. In this paper, SysML is applied to the design …

Discovering Design Requirements For Next Generation Arctic Tension Fabric Shelters, Mark W. Mcveigh

Theses and Dissertations

Military operations to remote Arctic regions require large-span temporary shelters to house tactical aircraft and provide heated maintained spaces. However, the current System-50 Large Area Maintenance Shelters used by the United States Air Force and Department of Defense are inadequate for Arctic deployments. These shelters lack durability against extreme subzero temperatures, heavy snow accumulation, and high wind speeds. They also fail to address critical Arctic-specific design challenges including permafrost protection, foundation disruption caused by frost heaves, and efficient heating as a result of their inadequate thermal resistance properties. This research analyzed 20 years of climatological data from 8,399 weather observation …

Integrating Off-Spec Scms Into Plc Blends, George A. Qubty

Civil Engineering Theses - Archive

Off-spec supplementary cementitious materials (SCMs) remain underutilized due to variability in reactivity and non-conformance with existing standards. This study evaluates the hydration behavior and fresh-state and mechanical performance of these materials in Portland limestone cement (PLC) systems. One Class F fly ash (FA), one bottom ash (BA), and two calcined clays (HACC and LACC) were evaluated as 20 % replacements to PLC. Hydration behavior was characterized using isothermal calorimetry and thermogravimetric analysis (TGA), while fresh-state and mechanical performance were assessed through flow table, Vicat setting time, load–crack mouth opening displacement (CMOD) flexural testing, and compressive strength testing. HACC increased compressive …

Thermo-Rheological And Tribological Properties Of Low- And High-Oleic Vegetable Oils As Sustainable Bio-Based Lubricants, Abiodun Saka, Tobechukwu K. Abor, Anthony C. Okafor, Monday U. Okoronkwo

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Vegetable oil-based lubricants have attracted increased research attention in recent decades as sustainable alternatives to conventional petroleum-based lubricants in metal machining. However, more studies are required to fully elucidate the thermo-rheological and tribological properties. This study presents an investigation of the thermo-rheological and tribological properties of different vegetable oils, including low- and high-oleic soybean oil, high-oleic sunflower, safflower, and canola oils. The lubricity, and evolution of viscosity and thermodynamic properties as a function of temperature were investigated to obtain important parameters including the viscosity index, flow behavior index, flow activation energy, specific heat capacity, thermal conductivity, coefficient of friction, contact …

Evaluation Of Practical Methods To Determine If A Karst Creek Is Gaining Or Losing: Case Study Of Leith Creek, Elizabeth Jones

Graduate Theses/Dissertations

Karst landscapes are abundant in Missouri, with features such as caves, springs, and sinkholes that form through the dissolution of limestone. Leith Creek is a small stream in Polk County, Missouri fed by two springs and the shallow unconfined Springfield Plateau aquifer, a highly karstified aquifer which is made up of limestone and minor interbedded shale-mudstone units. To determine if Leith Creek is gaining or losing, stream flow, water chemistry and temperature sensors were monitored. Stream flow results required multiple visits to take measurements while temperature sensors required two visits, one to install the dataloggers and another to remove the …

Controlling Nitrogen Pickup During Induction Melting Of Ultrahigh-Strength Cr-Ni-Mo-V Steels, Kingsley T. Amatanweze, Viraj A. Athavale, Mario F. Buchely, Laura N. Bartlett, Ronald J. O'Malley, Daniel M. Field

Materials Science and Engineering Faculty Research & Creative Works

Nitrogen pickup during air induction melting can result in porosity and a loss of fracture toughness in ultrahigh-strength quenched and tempered steel castings. Nitrogen atoms are easily adsorbed into liquid steel upon exposure to the air, and argon shrouding alone has limited effectiveness. Previous studies have shown that proper charge sequencing and maintaining a high amount of dissolved oxygen in the melt prior to tapping and deoxidation can limit nitrogen pickup in the melt. In the current study, the effect of melt practice and charging procedure on nitrogen pickup was studied as a function of hold time in a series …

Parametric Analysis Of Water Jet Descaling Efficiency Of Reheated Continuously Cast Thin Slab, Tochukwu P. Ojiako, Mario F. Buchely, Simon Lekakh, Ronald J. O'Malley, Richard Osei, Taha Tayebali

Materials Science and Engineering Faculty Research & Creative Works

Efficient oxide scale removal is critical for maintaining surface quality and process efficiency in steel manufacturing. This study optimizes water jet descaling by evaluating the performance of flat and rotary jet nozzles under varying process parameters. Using a combined approach of experimental analysis and computational fluid dynamics, it investigates the influence of pressure (138–275 bar), lead angle (0°, 15°, 25°), working distance (50–100 mm), and spray angle (15°–25°) on descaling efficiency. Findings indicate that flat jet nozzles achieve superior performance at short working distances due to concentrated impact forces, while rotary jet nozzles sustain efficiency over extended distances through dynamic …