Engineering Science and Materials Commons^™

Beauchemin Residence, Hannah E. Rogers

Architectural Engineering

The following report details the structural engineering completed on the Beauchemin Residence, as well as the associated drawings, details, and special considerations. The Beauchemin Residence is an existing single story wood frame building on raised wood floor, located in the city of San Clemente. The scope of work includes calculations for a new roof, new walls (gravity & lateral), retrofit of the existing foundation, new foundation, and providing calculations. The process and progression of the structural design is documented, and correlated to the final product in the Appendix A & B.

Spot-R By Triax, Purdue Ect Team

ECT Fact Sheets Archive

Triax’s Spot-r system was developed to tackle the construction industry’s unique safety and productivity challenges, stemming from a demonstrated lack of total jobsite visibility and automatically collected, easily accessible field data. Spot-r by Triax combines a proprietary mesh network with sensor technology to record and transmit previously unattainable workforce and equipment location, activity and safety data within a defined area – all in real-time.

The Spot-r network is installed around the site and operates in a 900 MHz network, with a subset using a cellular connection to forward Spot-r sensor data to Triax’s custom, cloud dashboard. In the hazardous construction …

Purdue’S Biowall, Purdue Ect Team

ECT Fact Sheets Archive

Mechanical ventilation, energy recovery ventilation, and infiltration (air that leaks into a building) are commonly used to introduce fresh air. These are all valid approaches, but a living plant-based filter is an innovative complement to these traditional technologies. A Biowall has the potential to improve indoor air quality while reducing the quantity of air needed for ventilation, creating the potential for energy savings. Figure 1 shows a Biowall prototype being evaluated in the ReNEWW House, a research home located near the Purdue University campus (http://www.renewwhouse.com/).

Mdp (Machine Drive Power) Intelligent Compaction Technology, Purdue Ect Team

ECT Fact Sheets Archive

Caterpillar developed MDP (Machine Drive Power) technology to fill this gap. Rather than an accelerometer and vibratory drum, it uses the principle of rolling resistance to provide indications of soil stiffness. This allows it to perform more reliably on cohesive and granular soils with less variability than accelerometer systems. It also means that the technology can be used on both vibratory and static drum compactors, which are often used on larger sites. While the technology is quite useful on its own, it is even better as a complementary technology to the existing accelerometer-based systems. Contractors who use vibratory soil compactors …

Additive Manufacturing With High Density Polyethylene: Mechanical Properties Evaluation, Calvin Wampol

Electronic Theses and Dissertations

High-density polyethylene is a common recyclable plastic that has a large potential as an additive manufacturing material due its economic and environmental benefits. However, high-density polyethylene has undesirable thermal properties that cause the material to shirk and not adhere to the printing bed during an additive manufacturing processes. Researchers have attempted to combat these thermal properties but have only created novel filaments of high-density polyethylene without being able to create 3D printed specimens for mechanical property testing. This paper presents several methods to create 3D printed specimens with pure high-density polyethylene filament on a fused filament fabrication type 3D printer. …

Leaching Of A Mongolian Chalcopyrite Concentrate, Nicholas J. Welham, Jadambaa Temuujin, Nader Setoudeh

Research outputs 2014 to 2021

A Mongolian chalcopyrite flotation concentrate was leached using sodium hypochlorite adjusted to different pH using hydrochloric acid. It was found that using a starting pH of below 5.0 resulted in more efficient leaching. The extent of chalcopyrite leaching was determined by the concentration of sodium hypochlorite with > 40% dissolution being achieved. The residue after leaching was found to consist primarily of unreacted chalcopyrite which would be suitable for further leaching or smelting.

Manufacturing Applications Of The One-Dimensional Cutting Stock Problem As A Team Project, Hüseyin Sarper, Nebojsa I. Jaksic

Electrical & Computer Engineering Faculty Publications

This paper explains the beneficial and practical impact of operations research in two real manufacturing settings. Two manufacturing examples used in student projects were (1) cutting rails (80‘ or 40‘) to manufacture railroad frogs of many sizes and (2) cutting round metal rolls (12‘ to 20‘) to meet customer demands for various lengths of cuts. Student teams in Engineering of Manufacturing Processes and Operations Research courses wrote computer programs. The program first identified all possible patterns that can be cut out of a given stock length. Next, the program created a mathematical model (a text file) as an output. This …

Moisture Induced Deformations In Glulam Members - Experiments And 3-D Finite Element Model, Henry Meleki Kiwelu

Tanzania Journal of Engineering and Technology (TJET)

Experiments were performed on scaled glue laminated bending specimens to observe time dependent development of deformations during drying and wetting. Measurements determined changes in the average moisture content and external shape and dimensions between when specimens were placed into constant or variable climates. Alterations in the external shape and dimensions reflected changes in the average value and distribution of moisture and mechanosorptive creep in the glulam. The results are being used to develop a sequentially-coupled three-dimensional hygrothermal Finite Element (FE) model for predicting temporally varying internal strains and external deformations of drying or wetting solid wood structural components. The model …

Characterization And Modeling Of Asphalt Concrete For Dynamic Properties And Performances, A S M A. Rahman

Civil Engineering ETDs

The recently developed mechanistic-empirical pavement design guide (MEPDG, also known as Pavement M-E design method) uses the nationally calibrated, binder viscosity-based dynamic modulus predictive model for the design and analysis of asphalt pavements. In this study, this model is assessed for its appropriateness for asphalt-aggregate mixtures typically used in New Mexico. In essence, this study investigates the predictability issue of complex modulus of New Mexico mixes. A total of 54 Superpave mixes with different aggregate gradations, air voids, and binder grades were collected from the mixing plants and from the pavement construction sites. The loose asphalt mixtures were then compacted, …

Wireless Power Transfer Roadway Integration, Trevor Gardner

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Electric vehicles represent a major accomplishment in the energy and transportation industry. Unfortunately, they are restricted to a small travel range because of limited battery life. Successful integration of wireless power transfer (WPT) systems into the infrastructure would remove the range restrictions of EVs. To successfully integrate this technology, several requirements must be met. First, the embedment process cannot interfere with the electrical performance of the inductive power transfer (IPT) system. Second, the presence of the IPT system in the pavement structure cannot negatively affect the roadway’s lifespan.

Several systems were directly embedded in roadway materials. The electrical properties of …

The Role Of Soil Stiffness In Reverse Fault Rupture Propagation, Moises I. Buelna

Master's Theses

A nonlinear Mohr-Coulomb constitutive model with a strain dependent yield surface and non-associated flow was employed to study the plastic soil properties which affect the rate of surface fault rupture propagation in reverse events. These numerical simulations show a trend for soils with higher stiffness to have a higher rate of rupture propagation. Additionally the study shows the effects of strain softening and hardening on the rate of rupture propagation. Soils which strain harden exhibiting ductile behavior typically require more basal offset to rupture to the surface than soils which strain soften exhibiting brittle behavior. These results agree with our …

Datumate, Purdue Ect Team

ECT Fact Sheets Archive

Datumate is digitally transforming civil engineering processes used in construction, surveying and infrastructure inspection markets with fully automated, highly precise, cost effective and safe tools. It utilizes state-of-the-art image processing and advanced drones and camera technologies dramatically reducing the amount of time surveying crews spend in the field, speeding up construction progress checks and shortening infrastructure inspection duration, while maintaining survey grade accuracy. The intuitive, simple and automated solutions increase productivity by saving field and office time in civil engineering and inspection projects of roads, intersections, stockpile volumes, topography, piping, industrial facilities, bridges, property surveys, building facades, railways, cellular infrastructure …

Impulse, Matt Schmidt, Lora Berg, Christine Delfanian, Dave Graves, Heidi Kronaizl, Emily Weber, Micayla Standish

Impulse (Jerome J. Lohr College of Engineering Publication)

[Page] 2 Better Equipped
[Page] 4 Flashback Summer Scholars
[Page] 6 Biomedical Engineering
Ryan Mahutga is the third mechanical engineering graduate in five years to receive a prestigious National Science Foundation Graduate Research Fellowship.
Nigerian native John Asiruwa is working with associate professor Stephen Gent on a mechanical engineering project to help Sanford Health build better heart stents.
Electrical engineering graduate Bruce Lutz has selected the biomedical engineering program as a target for his future giving.
[Page] 9 Programs Accredited
[Page] 10 Fast Wheels
[Page] 12 Five Unforgettable Weeks
[Page] 14 Second in the Nation
[Page] 16 Athletes and Engineering …

The Subject Librarian Newsletter, Engineering And Computer Science, Fall 2017, Buenaventura "Ven" Basco

Libraries' Newsletters

No abstract provided.

Rice Hull Bioreactor For Recirculating Aquaculture, Marlon A. Greensword

LSU Doctoral Dissertations

The engineering of floating media biofilters has been optimized over the years. The backwashing process has made them more energy and water efficient. Likewise, moving bed bioreactors (MBBR) are gaining interest and popularity because they are relatively affordable to build. Yet, developing countries’ aquaculture production remains largely excluded from the advances made in recirculating aquaculture systems (RAS). This discrepancy is partially driven by the high costs of media such plastic beads and Kaldnes (KMT) media, commonly used in MBBR.

This dissertation evaluates the usability and profitability of rice hulls (RH), an abundant by-product in many developing nations, as a sinking …

Technology To Manufacture Oriented Pvc (Pvc-O) Pipes, Purdue Ect Team

ECT Fact Sheets Archive

The development of Molecor´s technology, which is based on the application of a Molecular Orientation process, has delivered a significant turning point in the pipelines sector. With this technological development, the company has begun to manufacture TOM® PVC-O pipes, the most eco-friendly pipes on the market. The Molecor technology enabled eradicating many of the existing disadvantages of thermoplastic pipes.

This technology delivers a clear objective; to provide the water industry with a solution for pipes carrying pressurized water in an environmentally friendly, yet cost efficient manner. This also extends a service life compared to pipeline materials currently in use.

The …

Fluid Isolator, Purdue Ect Team

ECT Fact Sheets Archive

The reliability of concrete infrastructure is vital to ensuring daily life, as well as commerce, can progress without interruption. From the pavement of interstate highways to the driveways and sidewalks in a local neighborhood, concrete is expensive to install and often even more expensive, and intrusive, when it needs to be replaced. Unfortunately, to maintain functionality in winter climates concrete is heavily exposed to deicing salts. This not only affects the roads, driveways, and sidewalks where salt is applied directly, but many other areas such as parking and residential garages where vehicles (and people) will track salt along with water …

Netpoint®, Purdue Ect Team

ECT Fact Sheets Archive

The vast majority of construction scheduling software uses a combination of spreadsheets and Gantt charts for developing and depicting Critical Path Method (CPM) schedules. While this paradigm works for the expert scheduler, it is not conducive to collaboration, and it is prohibitively difficult for non-scheduling experts to understand.

NetPoint® provides a dynamic, visual interface conducive to touch and gestural input. Activities are drawn directly on a time-scale and may be placed on the same row or arranged automatically using codes or the WBS. Such control of the presentation makes it easier to communicate the plan to any type of audience. …

Re-Evaluation Of Acceptance Testing Criteria For Structural Masonry Using The Prism Test Method, James Bristow

UNLV Theses, Dissertations, Professional Papers, and Capstones

The current acceptance criteria for structural masonry in accordance with International Building Code allows for the prism test method to be used. However, without a proper understanding of the effects of variable material properties such as individual masonry unit compressive strength and the various material moduli of elasticity, as well as the effect of field conditions on the unit’s performance, masonry prisms may “fail” to reach the design compressive strength (f’m).

By identifying causes of failure and evaluating the failure magnitude, it is concluded that when the masonry prism test method is utilized for acceptance testing of as-built masonry structures, …

High Early-Age Strength Concrete For Rapid Repair, Matthew O. Maler

UNLV Theses, Dissertations, Professional Papers, and Capstones

The aim of this research was to identify High Early-Age Strength (HES) concrete batch designs, and evaluate their suitability for use in the rapid repair of highways and bridge decks. To this end, two criteria needed to be met; a minimum compressive strength of 20.68 MPa (3000 psi) in no later than 12 hours, and a drying shrinkage of less than 0.06 % at 28 days after curing. The evaluations included both air-entrained, and non-air-entrained concretes.

The cement types chosen for this study included Type III and Type V Portland cement and “Rapid Set” − a Calcium Sulfoaluminate (CSA) cement. …

Smartvid.Io, Purdue Ect Team

ECT Fact Sheets Archive

The collection, organization, and retrieval of industrial media is a pervasive challenge that is especially glaring for companies in the AEC industry. Construction projects often generate large volumes of pictures & videos from the field for tracking progress and communicating between engineers, contractors, and subcontractors. It is not uncommon for field personnel to capture hundreds of photos per week on any given jobsite.

Smartvid.io is a cloud-based software solution designed for the specific needs of industrial media. The application’s internal deep-learning engines, collectively nicknamed VINNIE (for ‘Very Intelligent Neural Network for Insight and Evaluation’), use speech and image recognition to …

Hillman Composite Beam (Hcb®), Purdue Ect Team

ECT Fact Sheets Archive

The Hillman-Composite Beam (HCB®), is an innovative structural member for use in highway and railroad bridges as well as marine facilities. The HCB is essentially a lightweight reinforced concrete beam strengthened and protected by a corrosion-resistant and resilient Fiberglass Reinforced Polymer (FRP) shell.

The beam is comprised of three main components, a concrete arch (compression reinforcement), an FRP bottom flange encapsulating steel strands tying the ends of the arch together (tension reinforcement) and the FRP shell. Galvanized Rebar “shear connectors” are used to make the beam composite with the concrete deck in the same manner as pre-stressed concrete beams.

The …

Industrial-Grade Monitoring Solution: Hoistcam, Purdue Ect Team

ECT Fact Sheets Archive

Safety and productivity are top priorities for contractors and industrial operations. Improving either makes a company more profitable and competitive. Technology advancements that can do both are important for every company to consider. HoistCam^TM industrial-grade video monitoring solutions can improve employees’ productivity and workplace safety in the construction industries. HoistCam also improves efficiency of operations and reduces job site accidents resulting in substantial cost savings to a contractor.

HoistCam™ is an integrated, wireless video system. The use of HoistCam eliminates blind lifts, blind spots and can share the live video with anyone, anywhere with solid security and easy control. …

Purdue Ect Report - Fourth Quarter 2016, Purdue Ect Team

ECT Fact Sheets Archive

Fourth Quarter 2016

This is a quarterly report from the Purdue ECT.

Road Zipper™, Purdue Ect Team

ECT Fact Sheets Archive

Construction work zones are growing in number around the world. The natural aging of existing roadway infrastructure ensures that more and more maintenance and rehabilitation will be required. Work zones, by their very definition, create two major problems that must be addressed in some way: safety and mobility. In the United States, highway work zones are responsible for almost 25% of all non-recurring congestion and 10% of overall congestion. Vehicle accidents are more common in work zones, and traffic congestion through work zones on urban arterials and freeways is often considered to be “unavoidable." To address these issues, ROAD ZIPPER™ …

Compact Facility For Testing Steady And Transient Thermal Performance Of Building Walls, Aimee Byrne, Gerard Byrne, Anthony Robinson

Articles

Energy efficiency retrofit of buildings represents a key effort in reducing EU energy demand by 20% by 2020. However, predictions tend to overestimate savings by large percentages. The shortfall in savings can be attributed to incorrect predictive techniques, comfort takeback along with other behavioural and workmanship variables. Common predictive techniques related to heat loss tend to be based on the U-value of the building envelope. This paper presents the design of a more straightforward and compact version of the traditional Hot-Box apparatus (measures U-value) which instead determines the thermal resistance of samples of building envelope. U-value includes the need to …

Analytical Strip Method For Thin Cylindrical Shells, John T. Perkins

Theses and Dissertations--Civil Engineering

The Analytical Strip Method (ASM) for the analysis of thin cylindrical shells is presented in this dissertation. The system of three governing differential equations for the cylindrical shell are reduced to a single eighth order partial differential equation (PDE) in terms of a potential function. The PDE is solved as a single series form of the potential function, from which the displacement and force quantities are determined. The solution is applicable to isotropic, generally orthotropic, and laminated shells. Cylinders may have simply supported edges, clamped edges, free edges, or edges supported by isotropic beams. The cylindrical shell can be stiffened …

Development Of A Test Level 3 Transition Between Guardrail And Portable Concrete Barriers, Robert W. Bielenberg, David Gutierrez, Ronald K. Faller, John D. Reid, Phil Tenhulzen

Department of Civil and Environmental Engineering: Faculty Publications

Road construction often requires that work zones be created and shielded by portable concrete barriers (PCBs) to protect workers and equipment from errant vehicles as well as to prevent motorists from striking other roadside hazards. For an existing W-beam guardrail system installed adjacent to the roadway and near the work zone, guardrail sections are removed so a PCB system can be placed. A study was done to develop a crashworthy transition between W-beam guardrail and PCB systems. Design concepts were developed and refined through computer simulation with LS-DYNA. Additionally, a study of critical impact points was conducted to determine impact …

Evaluating The Readability Of Radio Frequency Identification For Construction Materials, Younghan Jung, Michael M. Jeong

Engineering Technology Faculty Publications

Radio Frequency Identification (RFID), which was originally introduced to improve material handling and speed production as part of supply chain management, has become a globally accepted technology that is now applied on many construction sites to facilitate real-time information visibility and traceability. This paper describes a senior undergraduate project for a Construction Management (CM) program that was specifically designed to give the students a greater insight into technical research in the CM area. The students were asked to determine whether it would be possible to utilize an RFID system capable of tracking tagged equipment, personnel and materials across an entire …

Lucidpipe™ Power System, Purdue Ect Team

ECT Fact Sheets Archive

In most gravity fed water transmission pipelines, it is desired to reduce excess pressure head to prevent undue strain on a pipeline and lower the incidence of leaks. Normally this is done with pressure reducing valves that essentially burn off this excess pressure as heat. The LucidPipe™ system converts it to low cost electricity thereby removing unwanted pressure and generating energy at the same time - energy that can be put used behind the grid or put back on the grid. The LucidPipe™ system extracts a small percentage of pressure head providing nearly invisible operation allowing water operators to fulfill …