Engineering Education Commons^™

Engineering Leadership, Mike Murphy, Eugene Coyle

Books/Book chapters

By 1921 the American sociologist Thorstein Veblen in his book The Engi-neers and the Price System argued for a technocracy in which the welfare of humanity would be entrusted to the control of the engineers because they alone were competent to understand the complexities of the industrial system and processes and thereby optimize and maximize its output. This chapter sets out to explore the extent to which Veblen’s technocratic leadership thesis has come to pass. We first review the role of the engineer in society and in the context of Europe, the US and China, and examine the influence of …

An Assessment Of Student Perceptions On The Use Of Multiple Engineering Textbook Editions To Reduce Cost To Students, Frank G. Jacobitz, Thomas F. Schubert, Ernest M. Kim

School of Engineering: Faculty Scholarship

No abstract provided.

A Comparison Study Of Project-Based-Learning In Upper-Division Engineering Education, Ron Ulseth, Bart Johnson, Rebecca Bates

Integrated Engineering Department Publications

A new model for engineering education was launched in January 2010 in northeastern Minnesota. The Iron Range Engineering (IRE) model is a project-based-learning (PBL) methodology that focuses on producing graduates with integrated technical and professional knowledge and competencies. A unique and important element of the IRE model has 100% of IRE student learning taking place in the context of industry projects. Students at IRE are upper-division engineering students who transferred from Minnesota community college lower-division engineering programs. To understand the impact that IRE methodology may have on preparing engineers with the competencies needed for the future workplace, a comparison study …

The Iron Range Engineering Pbl Curriculum: How Students Adapt To And Function Within Pbl, Rose M. Marra, Betsy Palmer, Ron Ulseth, Bart Johnson

Integrated Engineering Department Publications

Iron Range Engineering is a unique complete-PBL curriculum for upper division students. Rather than studying about engineering in traditional engineering courses, IRE students solve complex and ill-structured industry problems in mining, milling, and manufacturing industries. To support students’ transition to PBL and to facilitate deep approaches to learning technical and professional competencies required for the engineers of the future, faculty have created a variety of structures. This paper describes IRE’s PBL implementation and reports the results of a qualitative study of their students.

Successful Engineering And Technology Student Mobility: Key Student Perspectives And Quality Determinants Before, During And After Student Exchange Under The Atlantis Programme, Mike Murphy, Donal Mchale, Michael Dyrenfurth

Conference papers

In this paper, we describe the lessons learned, and determinants of quality, from two Atlantis programmes. Additionally our two student authors will share key student perspectives relevant to student mobility: (1) before they visited the partner university, (2) while they were studying at the partner university and (3) after they returned to their home university. Purdue University and the Technological University Dublin, together with the Hochschule Darmstadt and Pennsylvania State University, were successful in securing an Atlantis mobility grant [1] for four years to support student and staff mobility between the United States and Europe. The programme has just completed …

A New Model Of Project Based Learning, Ron Ulseth, Jefferey E. Froyd, Thomas A. Lotzinger, Dan Ewert, Bart Johnson

Integrated Engineering Department Publications

A new model for engineering education has been developed and funded. The model is 100% project based learning (PBL) where the students develop their own learning objectives. The projects are authentic needs contributed by collaborating industries. Students monitor the acquisition of 32 technical competencies and all of the design and professionalism competencies required of new practicing engineers. The reasons for the new model, description of the model, research supporting the model, methods for evaluating the model and its transportability are discussed.

Entrepreneurship In The Iron Range Engineering (Ire) Model, Dan Ewert, Ron Ulseth, Bart Johnson, Jeff Wandler, Andrew Lillesve

Integrated Engineering Department Publications

The aim of this paper is to describe a new model for engineering education that has entrepreneurship, in its many form, as a focus. Issues involved with integrating student-based entrepreneurship into the educational process are also described.

Missouri S&T Engineering Management Capstone Senior Design: Lessons Learned And Challenges To Come, Stephen A. Raper

Engineering Management and Systems Engineering Faculty Research & Creative Works

A more traditional, capstone senior design course was recently added as a requirement for Engineering Management undergraduates in the Engineering Management & Systems Engineering Department at Missouri S&T. The case studies course that had served that purpose was deemed to be insufficient for ABET accreditation purposes by department faculty. The most recent 2008 accreditation visit for the department verified this belief and caused the department to launch the new class earlier than anticipated to prove the class would be taught and that it would meet required standards. Thus, no weaknesses or concerns were noted in this area in the final …

Infusing Engineering Design Into High School Stem Courses, Morgan Hynes, Merredith Portsmore, Emily Dare, Elissa Milto, Chris Rogers, David Hammer, Adam Carberry

Publications

Society is recognizing the need to improve STEM education and introduce engineering design concepts before college. In the recent National Academy of Engineers report, Engineering in K-12 Education: Understanding the Status and Improving the Prospects, the authors suggest that the STEM disciplines not be treated as ―silos‖ and that engineering might serve as a motivating context to integrate the four STEM disciplines (Katehi, Pearson, & Feder, 2009). Recent research has suggested that integrated technology and engineering design curriculum can serve as a positive model for mathematics and science learning and retention (Ortiz, 2010; Wendell, 2011). The Tufts University Center for …

Improve Or Perish, Revisited -- Again, Johnny J. Moye, Petros J. Katsioloudis

STEMPS Faculty Publications

The article reviews the articles "A Major Problem in Education: Improve or Perish," by M. Ray Karnes and "Improve or Perish-Revisited," by John V. Gallagher.

Simulation And Visualization Enhanced Engineering Education- Development And Implementation Of Virtual Experiments In A Laboratory Course, Sushil K. Chaturvedi, Kaustubh A. Dharwadkar

Mechanical & Aerospace Engineering Faculty Publications

This paper presents results from a National Science Foundation grant titled "Simulation and Visualization Enhanced Engineering Education", funded by the EEC division. Although the scope of the project is quite broad, embracing a wide range of courses in three engineering disciplines, the present work describes the results obtained from application of simulation and visualization for development and implementation of web-based virtual engineering laboratories. The present work leverages the advancement in hardware and software technologies to map physical experiments into web-based virtual experiments that can be used to enrich student's laboratory experience. Four physical experiments in the thermo-fluids laboratory course have …

Design And Implement A Cost-Effective Wireless Communication Project On A Pic Training System, Steve Hsiung, Walter F. Deal, Lacides Agustin Osorio, Mathew Henderson

Engineering Technology Faculty Publications

Wireless communication becomes popular and widely used in almost every electronic product in our daily life. The RF communication is one of the major wireless applications in consumer products. Usually, it is integrated with an embedded system (microcontroller) to control various applications such as temperature sensing, data logging, data exchange, actuator activation, and user interaction wirelessly. A project based model can be used as an effective instructional strategy to enhance learning about complex RF concepts and technologies. The project method can lead to improved understanding and create interest by actively engaging the student with hands-on and problem solving and critical …

Building A Successful Transatlantic Collaboration In Engineering/Technological Education; Lessons From A Six Year Journey, Donal Mchale, Mark Mcgrath, John Lawlor

Conference Papers

This paper reflects on key learning’s from the first six-years (2004-2010) of the development of a collaborative journey of two trans-Atlantic higher-educational institutions. It describes the progress towards building a sustainable and innovative international educational partnership in Engineering/Technological education between the Technological University Dublin,DublinIrelandandPurdue University,Indiana,USA.

In particular, the paper provides insight into the iterative stages of development of this relationship. It reflects on some of the key challenges and it recognises the critical enablers of success. It focuses on challenges and solutions in the following six important areas

(i) The partnership initiation stage. Key considerations and important enablers of future …

An Integrated Simulation Design With Three-Dimensional Motions And A Hydraulic Stewart Simulator, Cheng Lin, Gene Hou, Yuzhong Shen, Hector Garcia

Engineering Technology Faculty Publications

This paper presents an integrated design process and tests of a Stewart simulator with a virtual visualization tool, which uses Virtools to create and generate three-dimensional motions. An inverse kinematic algorithm is written to convert each visualized motion to the displacements of six cylinders in a Stewart motion simulator. Information of the displacements is then transferred through the User Datagram Protocol (UDP) to a personal computer which has the LabVIEW software. An NI USB-6251 data acquisition device is applied to interact with the LabVIEW program and the Stewart hydraulic simulator. The approach presented in this paper to function an old …

Encouraging Lifelong Learning For Engineering Management Undergraduates, Susan L. Murray, Stephen A. Raper

Engineering Management and Systems Engineering Faculty Research & Creative Works

The current ABET guidelines place an emphasis on life-long learning for our undergraduate students. What is life-long learning? How can we encourage students to consider global issues, current events, or even anything "that isn't going to be on the next test"? In this paper we present survey results evaluating habits of undergraduate students entering an engineering management program and seniors related to life-long learning including attending professional society meetings, reading trade publications, reading business related books, and other learning outside of the classroom activities. This paper also presents a two semester effort to increase life-long learning activities among undergraduate engineering …

The Current Generation Of Integrated Engineering Curriculum, Michael A. Collura, Samuel Bogan Daniels, Jean Nocito-Gobel, David Harding

Engineering and Applied Science Education Faculty Publications

In September of 2004 our university adopted the Multidisciplinary Engineering Foundation Spiral Curriculum as the basis for disciplinary engineering programs in Chemical, Civil, Electrical, Mechanical and General Engineering. The curriculum includes a sequence of first and second year engineering courses, matched closely with the development of students’ mathematical sophistication and analytical capabilities and integrated with course work in the sciences. Students develop a conceptual understanding of engineering basics in this series of courses which stress practical applications of these principles. The new curriculum was designed to provide students with a multidisciplinary perspective while developing basic engineering skills and fostering an …

Addressing Student Retention In Engineering And Engineering Technology Through The Use Of A Multidisciplinary Freshman Course, Anthony Dean, Bonita Anthony, Linda Vahala

Engineering Technology Faculty Publications

The Engineering Fundamentals Division of the Batten College of Engineering and Technology (BCET) at Old Dominion University administers a freshman engineering course sequence, along with four engineering departments (Mechanical Engineering, Civil and Environmental Engineering, Aerospace Engineering, and Electrical and Computer Engineering) and the Department of Engineering Technology (which offers degrees in Mechanical Engineering Technology, Civil Engineering Technology and Electrical Engineering Technology). The two course sequence, Exploring Engineering and Technology I and II, involve the five departments in teaching at least one five week module in each of the two courses. Each department generally involves the students in a basic design …

Introducing Freshmen To Construction Estimating And Scheduling Using K'Nex Bridge Kits, Carol Considine, Vernon Lewis

Engineering Technology Faculty Publications

The College of Engineering and Technology at Old Dominion University has developed project-based courses for freshmen engineering students in order to engage them in engineering early with the goal of increasing retention. The courses are divided into three five-week modules that are distributed among the various departments within the college. The Engineering Technology department is responsible for two of the five week modules. One module is comprised of all the engineering technology curriculums; civil, electrical and mechanical, and the other module is strictly a civil engineering technology project.

The civil engineering technology project is focused on the construction industry. Students …

Enhancing Student Learning In Engineering Technology Programs? A Case For Physical Simulations, Alok Verma

Engineering Technology Faculty Publications

Physical simulations have a proven record as a teaching tool. Concepts that are often hard to grasp are made easy by the use of physical simulation activities. The constructivism learning theory suggests that people learn better by actively participating in the process of learning. According to the Encyclopedia of Educational Technology, "Simulation-based learning involves the placement of a student into a realistic scenario or situation. The student is then responsible for any changes that occur as a result of their decisions." A number of physical simulation based tools have been developed by the author for use as instructional tools to …

Designing A Microcontroller Training Platform For Active Distance Learning Engineering And Technology Students, Steve C. Hsiung, James E. Eiland, John R. Hackworth, John Ritz

Engineering Technology Faculty Publications

This is an active distance-learning project that addresses the hands-on microprocessor/ mi-crocontroller-related courses. A research team designed a low-cost training system with supporting instructional materials to assist the teaching of these concepts. Individual laboratory activities are being developed to reinforce student learning and skill development in programming concepts. This basic system format eventually will support an array of engineering and technology courses. This project involves two community colleges, Blue Ridge Community College (BRCC) and Olympic College (OC), and a four-year university, Old Dominion University (ODU), in a collaborative research team to design and develop a specific PIC microcontroller training system …

An Assessment And Continuous Improvement Model For Engineering Technology Programs, Alok Verma, Gary Crossman

Engineering Technology Faculty Publications

Assessment and continuous improvement are essential and critical processes for higher education. Development and implementation of such processes are not only required by the Accreditation Board for Engineering and Technology (ABET) but it is also a necessary condition for the maturation and development of any engineering technology program. The assessment and continuous improvement plan discussed here was developed at Old Dominion University (ODU) and implemented during the last accreditation cycle within the Engineering Technology Department. The plan is based on two cycles of assessment and evaluation, a short cycle of one year and a long term cycle of three years. …

A Template Functional-Gage Design Using Parameter-File Table In Autodesk Inventor, Cheng Lin, Moustafa Moustafa

Engineering Technology Faculty Publications

A systematic approach using Autodesk Inventor to design the functional gages of Geometric Dimensioning & Tolerancing (GD&T) is presented. The gages can be used to check straightness, angularity, perpendicularity, parallelism, and position tolerances of a part when geometric tolerances are specified with Maximum Material Condition (MMC). Four steps are proposed to accomplish the task: (1) creation of two-dimensional (2-D) initial template files, (2) generation of hierarchical folders for the template files, (3) creation a 3-D gage model from a specific template file, and (4) dimensioning and generation of the gage drawing. Results show that, by following this approach, students can …

Privatization Initiatives: A Source For Engineering Economy Case Studies, Paul Kauffmann, Tarek Abdel-Salam, Keith Williamson, Carol L. Considine

Engineering Technology Faculty Publications

A case study method which reviews the basic structure of the circular A-76 privatization decision model is discussed. It highlights the possibilities for development of case studies that can challenge student teams to apply engineering economy tools while developing skills in a range of circular areas that are important to undergraduate engineering education and career success in engineering practice. Beyond building quantitative and qualitative business analysis skills, engineering economy cases can enhance student skills in other topical areas such as technical presentations, and report writing. The privatization initiatives and related decision models can also enhance human relations oriented skills in …

Project Planning & Development For Engineering Freshmen, Bouzid Aliane, Michael Collura, Samuel Bogan Daniels, Jean Nocito-Gobel

Engineering and Applied Science Education Faculty Publications

The nature and background of students seeking an engineering education has changed drastically in the last decade, as has the expectations of industrial employers. Many students lack the organizational skills needed for academic success. Similar organizational skills, although more advanced, are required for managing engineering projects. A new course was developed by the faculty at the School of Engineering and Applied Science at the University of New Haven. Through this course, a key component of the Multidisciplinary Engineering Foundation Spiral, seeks to promote higher retention rates, increase student motivation and begin a confidence-building transition to professional practice. Project management concepts …

Mapping Of Thermo-Fluids Laboratory Experiments Into Web-Based Experiments, Sushil Chaturvedi, Rick Mckenzie, O. A. Akan, A. Priyadershini

Mechanical & Aerospace Engineering Faculty Publications

A methodology is being developed for transforming physical experiments from the undergraduate thermo-fluids laboratory into a web-based virtual experiments. Important characteristics of physical experiments are identified in order to preserve them in physical to virtual domain mapping. Several commercially available software are employed to incorporate in the web-based experiments characteristics such as recreation of physical phenomenon in the virtual domain, measurement of physical quantities on a computer screen, assembly of virtual probes and coupling of the virtual experiment with a data acquisition software. A virtual reality software has been incorporated to enable web-based students to navigate through the virtual laboratory, …

Undergraduate Summer Research In Structural Engineering, Norbert J. Delatte

Civil and Environmental Engineering Faculty Publications

For the last seven years, a summer Research Experiences for Undergraduates site in structural engineering, funded by the National Science Foundation, has operated at the University of Alabama at Birmingham. During this time, 33 students from 22 colleges and universities have participated in the site. Participants are recruited nationally and have come from as far away as California and Puerto Rico. The program is intended to provide students interested in graduate studies with an introduction to research methods, and to provide students who will not continue their studies past a bachelor of science in civil engineering with a better understanding …

Project-Based Freshmen Engineering Courses In Civil Engineering Technology, Vernon W. Lewis Jr., Carol L. Considine

Engineering Technology Faculty Publications

Old Dominion University (ODU) has developed two fundamental courses for freshmen engineering students. The first course introduces the fundamentals of the practice of engineering including innovation, creativity, design and manufacturing, commercialization, teaming skills, environmental impact, and ethics. The second course is an exploration of engineering and engineering technology disciplines with an emphasis on projects. The purpose of these courses is to engage the students in the application of engineering early in their course of study with the hope that their interest will be reinforced and the likelihood of their being retained as students will increase. The courses are divided into …

Design, Development, And Delivery Of Certificate Programs For Funding Opportunities And Industry Collaboration, Carol Considine, Paul Kauffmann

Engineering Technology Faculty Publications

Many engineering technology departments have four general areas that are used for evaluation of tenure and promotion. These areas include teaching, research and scholarly activities, service, and other professional activities. Although teaching is the primary mission in most engineering technology programs, external funding as part of the research area is playing a larger role in tenure decisions at many universities. Many faculty members in engineering technology programs come from an industrial background and do not have a specific research area of interest and contacts within the research community. These faculty members must look at other avenues to develop the external …

An Integration Of Pc Hardware & Software In Teaching Engineering Technology Courses, Steve Hsiung, Richard Jones

Engineering Technology Faculty Publications

As technology advances, the price of a PC drops dramatically. This trend has resulted in PCs that are complex, powerful, and very affordable. Today's PC is a popular and essential tool in teaching software programming course(s) in C, C++, Visual Basic, or Java, running commercial software supporting courses in circuit simulation/design or circuit board layout, and acting as a workstation to gain access to the Internet or LAN networks. In most Engineering Technology curricula there is a limited amount of linkage between those PC applications. The actual effort to merge the hard-gained knowledge of hardware & software concepts together through …

Performing Interactively A Thermo-Fluids Laboratory Experiment In The Virtual Domain, Sushil K. Chaturvedi, Ali O. Akan, Tarek M. Abdel-Salam, A. Priyadershini

Mechanical & Aerospace Engineering Faculty Publications

This paper deals with the development of an experiment in the virtual domain for the undergraduate thermo-fluids laboratory in the mechanical engineering program. A physical experiment titled "Venturimeter as a Flow Measuring Device" is replicated as a computer-based experiment as part of the ongoing effort at Old Dominion University to develop web-based laboratories that would provide students hands-on experience in the virtual domain. A web-based module is developed that allows experimentation and data taking in a virtual setting much like in the physical experiment. This module incorporating the virtual venturimeter has been used by students to take data for several …