Engineering Education Commons^™

Bridging The Research-Practice Gap: Development Of A Theoretically Grounded Workshop For Graduate Students Aimed At Challenging Microaggressions In Science And Engineering, Amy C. Moors, Lindsay Mayott, Benjamin Hadden

Psychology Faculty Articles and Research

Efforts to promote diversity and inclusion often lack a theoretical basis, which can unintentionally exacerbate issues. In this paper, we describe the development and evaluation results of a theoretically grounded workshop aimed at reducing microaggressions and promoting ally engagement among graduate students in science and engineering. In Study 1, using a Delphi method, eight science and engineering faculty members with backgrounds in diversity efforts provided feedback on workshop development. In Study 2, 107 graduate and advanced undergraduate students engaged in the 90-minute interactive workshop. Results indicate that attendees found the workshop valuable, developed new skills for ally engagement, and planned …

College-Wide First Year And Career Mentorship Programs, Ronald S. Harichandran, Nadiye O. Erdil, Stephanie Gillespie

Engineering and Applied Science Education Faculty Publications

The College of Engineering at the University of New Haven began two formal mentorship programs in spring 2020 with the help of a for-profit company named Mentor Collective. The First-Year Mentorship Program is designed for students entering the university and the Career Mentorship Program is designed for juniors and seniors. The programs were sponsored by a generous gift from Sikorsky, a Lockheed Martin Company. This paper focuses particularly on the impact of the First-Year Mentorship Program on the first to second year retention of engineering and computer science students.

Graduate School Academic Catalog 2022-2023, Graduate School Of Engineering And Management, Air Force Institute Of Technology

AFIT Documents

The Graduate Catalog represents the offerings, programs, and requirements in effect at the time of publication.

Teaching Learning Newsletter Vol 2 Issue 1, Sastra Deemed To Be University

TLC Newsletter

No abstract provided.

Inclusiveness In Teaching : Aligning Culturally Relevant Journal Articles With Course Content, Jacimaria Batista

UNLV Best Teaching Practices Expo

The practice focuses on Inclusiveness in Water/wastewater Engineering Teaching. Upon reviewing the ethnic (Fig. below) and gender diversity (24% women) of her 57- student course on water/wastewater treatment, the Instructor replaced previously assigned articles with the reading of articles focusing on water issues affecting minoritized communities in the U.S (see references).The goal was to make students aware of water/wastewater issues facing minority communities in the US. Often, the media portrays Africa or South America as places where safe water is not available, ignoring the needs of minoritized communities in the US. A second goal was to evaluate the interest of …

The Return Of Labor-Based Grading Contracts, Erica J. Marti

UNLV Best Teaching Practices Expo

Despite best attempts, grading can be very subjective when it comes to determining quality. For certain courses, the process is just as important as the product, but often the grade is based mainly on the quality of the product and doesn’t take the labor or process into account. One alternative to standard grade systems is labor-based grading or contract grading. In this system, students meet certain requirements to earn a certain grade. If students meet the criteria for the assignment, it counts toward the contract. If not, they can revise, reflect and resubmit. With this format, students can focus on …

Learning Retention Through Glossary Development, Haroon Stephen

UNLV Best Teaching Practices Expo

The teaching practice is to engage students in glossary development. It is adopted to increase student learning retention of civil engineering terms. Learning retention is the process of transferring new information into long-term memory. This teaching practice was implemented in two courses during summer and fall 2021. The benefits of this practice were assessed using a post-semester survey. The survey responses revealed that this teaching practice increased understanding of the technical terms of 87% of the respondents and increased conceptual understanding of 83% of the respondents.

Validation Of The Ambassador Questionnaire For Undergraduate Students Conducting Engineering Outreach, Melissa G. Kuhn, Shanan Chappell Moots, Joanna K. Garner

Center for Educational Partnerships Publications

Although K-12 engineering outreach commonly involves college students, the young professionals who act as ambassadors for their field are less likely to be studied than the students they serve. Yet, outreach activities may offer opportunities for undergraduate students to develop aspects of their professional selves. As there is currently no comprehensive measure that allows researchers, program evaluators, and outreach advisors to examine ambassadors' professional development and growth, this study sought to develop and validate an Ambassador Questionnaire (AQ). The multi-step process included the selection and adaptation of items from extant measures of engineering students' motivation, beliefs, professional skills, and perceptions …

Design And Analysis Of The Virtual Reality Welding Training, Ritesh Chakradhar

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Business and Technology at Morehead State University in partial fulfillment of the requirements for the Degree Master of Science by Ritesh Chakradhar on November 19, 2021.

Teaching Learning Newsletter Vol 1 Issue 3, Sastra Deemed To Be University

TLC Newsletter

No abstract provided.

Design-Based Research: Students Seeking Co-Op In Refined Educational Model, Dennis Rogalsky, Ron Ulseth

Integrated Engineering Department Publications

This research paper continues a longitudinal implementation of a design-based research (DBR) study/implementation for a new co-op centric educational model. This is a benchmarking study by the university program.

The new model is an adaptation of two recently recognized (by a 2018 MIT report) emerging world-leading engineering educational models, Charles Sturt University (Australia) and Iron Range Engineering (Minnesota). Adapted from Charles Sturt is the co-op model whereby students spend an initial on-campus period and then combine co-op work placements and on-line learning all the way to degree completion. Adapted from Iron Range are the curricular strategies that empower a graduate …

Expanding A Mechanical Engineering Technology Curriculum To Include Additive Manufacturing, Hamid Eisazadeh, Mona Torabizadeh

Engineering Technology Faculty Publications

Additive Manufacturing (AM) has become a game changer for the manufacturing industry. With growing implementation of AM in various industries, it is the responsibility of different levels of education to expose students to AM technologies and to integrate AM into their curriculum. It is well known that students who gain the skillsets of today’s industry have a better chance in getting a competitive job. In response to this need, a new senior level elective course on AM, has been developed for the first time in Old Dominion University (ODU) region in the South. The course was developed and taught by …

The Influence Of Participation In A Multi-Disciplinary Collaborative Service Learning Project On The Effectiveness Of Team Members In A 100-Level Mechanical Engineering Class, Stacie I. Ringleb, Pilar Pazos, Julia Noginova, Francisco Cima, Orlando Ayala, Krishnanand Kaipa, Jennifer Kidd, Kristie Gutierrez

Mechanical & Aerospace Engineering Faculty Publications

Engineers need to develop professional skills, including the ability to work successfully in teams and to communicate within and outside of their discipline, in addition to required technical skills. A collaborative multi-disciplinary service learning project referred to as Ed+gineering was implemented in a 100-level mechanical engineering course. In this collaboration, mechanical engineering students, primarily in the second semester of their freshman year or first semester of their second year, worked over the course of a semester with education students taking a foundations course to develop and deliver engineering lessons to fourth or fifth graders. Students in comparison engineering classes worked …

Contributing To Engineering Colleges Students' Development Through Out-Of-Class Involvement: A Survey Of Chinese Private Colleges' Engineering Students, Wanlu Li

Education (PhD) Dissertations

The purpose of this study was to investigate the primary characteristics of engineering college students’ involvement in out-of-class activities (OA) at one private college in China through the use of the translated and culturally adapted Chinese version of the Postsecondary Student Engagement Survey (PosSES 2.1). This study provides the statistical analyses of the survey data completed by 283 senior engineering students on their perceptions about their levels of involvement related to positive/negative outcomes students perceive and affective engagement. Data results showed all levels of involvement have a significant influence on positive outcomes. Besides, active involvement degree, hours, and types of …

The Influence Of Policy Implementation In The Midwest: How A Sstem Program Broadens Participation And Enhances Engineering Identity For Community College Students, Sarah L. Rodriguez, Maria L. Espino, Brian D. Le, Kelly J. Cunniham

Faculty Publications

This qualitative research study describes how a Midwest community college’s implementation of an Scholarships in Science, Technology, Engineering, and Mathematics (SSTEM) program influences engineering identity development for its students with financial need. Using a phenomenological approach, the study finds that the program enables community college students to have greater financial freedom and an ability to focus on engineering identity. In addition, the SSTEM program enhances student connections with STEM faculty, program staff, and peers. The study highlights the need for creating spaces for engineering identity development, developing connections between faculty, staff, and students, and enhancing transfer connections through different experiences. …

Teaching Learning Newsletter Vol 1 Issue 2, Sastra Deemed To Be University

TLC Newsletter

No abstract provided.

A Phenomenographic Study Of Academics Teaching In Engineering Programmes In Ireland: Conceptions Of Professional Skills And Approaches To Teaching Professional Skills, Una Beagon

Doctoral

Engineers play a central role in addressing the challenges which face society. However, the influence of globalisation, disruptive technological change and socially complex problems will greatly affect the way engineers work in the future.

As a result, there have been calls to embrace transformational change in engineering education, yet the literature reveals that many reform efforts have fallen short. Industry and society will therefore continue to look to Higher Education Institutions (HEIs) to better prepare engineering graduates with the new skills needed to face the challenges of the future. Notwithstanding the critical and valued role that technical engineering subjects have …

Comparison Of Pre-Intervention Idi Results From Stem And Non-Stem Undergraduate Students, Anne M. Lucietto, Liza Russell

Journal of Global Education and Research

The emphasis on intercultural competence is more prevalent in STEM (Science, Technology, Engineering and Mathematics) majors as the world shifts towards a more globalized economy. When entering higher education, students have differing levels of cultural interaction due to varying peer interaction, family experiences, international travel, and social media experiences. The Intercultural Development Inventory (IDI) has been used to develop an understanding of how students view others and the level of skills they have to interact and adapt to other cultures. Using published data focused on pre-intervention assessment, researchers compared it to data obtained from STEM students preparing for an international …

Nature Of Problem-Solving Skills For 21st Century Stem Learners: What Teachers Need To Know, Paul Nnanyereugo Iwuanyanwu

Journal of STEM Teacher Education

Since the emergence of the fourth industrial revolution which calls for a new model of learning for the twenty-first century learners, it has been argued that the nature of problems that learners must solve in science, technology, engineering and mathematics (STEM) must also be transformed to enable new forms of learning skills that are needed to tackle complex global challenges. However, the question of how best to teach these skills purposefully and explicitly is largely overlooked. STEM education reformers recognize that the lecture method or traditional method of teaching is highly ineffective for teaching twenty-first century competencies and skills that …

An Evaluation Of Technical Oral Presentation Components In Engineering, Mohamed Abdullah Adnan

Student Works (2020-2029)

This case study evaluates implementation of Technical Oral Presentations (TOP) components in English for Specific Academic Purposes (ESAP) language course for engineering undergraduates at a technical university. The respondents were 310 engineering undergraduates who registered for English Technical Communication (ETC) course and 12 instructors from Universiti Malaysia Pahang. The case study employs Convergent Parallel design to collect data in all four evaluation components of Context, Input, Process and Product (CIPP) Evaluation Model. Two questionnaires were administered in this study. The Questionnaire Set A were distributed to English language instructors teaching English for Technical Communication course while the Questionnaire Set B …

Breaking Down The Silos: Innovations For Multidisciplinary Programs, Jillana Finnegan, Donna C. Llewellyn

University Author Recognition Bibliography: 2020

Universities, colleges and academic departments acknowledge the need for more collaborative, multidisciplinary, entrepreneurial, and global education. Unfortunately, this is no trivial task. Centuries of tradition have produced institutional silos, reinforced by layers of policy and cultural differences between academic departments, between colleges, and between academic and non-academic units. Successful multidisciplinary programs require programmatic and administrative innovation that meet faculty, student and institutional needs and leverage available resources. The Vertically Integrated Project (VIP) model, in place at thirty-seven institutions, has achieved notable success in these areas. This paper profiles innovations from ten VIP Programs in three areas: institutional organization, program organization, …

The First Year Of An Undergraduate Service Learning Partnership To Enhance Engineering Education And Elementary Pre-Service Teacher Education, Stacie I. Ringleb, Jennifer Kidd, Pilar Pazos, Kristie Gutierrez, Orlando Ayala, Krishnanand Kaipa

Mechanical & Aerospace Engineering Faculty Publications

This IUSE project was designed to address three major challenges faced by undergraduate engineering students (UES) and pre-service teachers (PSTs): 1) retention for UESs after the first year, and continued engagement when they reach more difficult concepts, 2) to prepare PSTs to teach engineering, which is a requirement in the Next Generation Science Standards as well as many state level standards of learning, and 3) to prepare both groups of students to communicate and collaborate in a multi-disciplinary context, which is a necessary skill in their future places of work. This project was implemented in three pairs of classes: 1) …

Enhancing Teamwork Skills Through An Interdisciplinary Engineering Service Learning Collaboration, Pilar Pazos, Francisco Cima, Jennifer Kidd, Stacie I. Ringleb, Orlando Ayala, Kristie Gutierrez, Krishnanand Kaipa

Engineering Management & Systems Engineering Faculty Publications

The purpose of this research paper is to explore whether participation in an interdisciplinary collaboration program partnering Preservice Teachers (PST) and Undergraduate Engineering Students (UES) results in an increase in teamwork effectiveness. The interdisciplinary collaboration was designed as a service-learning project within existing undergraduate programs that included the development and delivery of engineering content to a K-12 audience. The collaborations were integrated into existing courses in two colleges, engineering and education. The Behaviorally Anchored Rating Scale (BARS) version of the Comprehensive Assessment of Team Member Effectiveness (CATME) was used midway and at the end of the project to evaluate teamwork …

Design A Class Infusion Project Of Asme Geometric Dimensioning And Tolerancing Standard, Cheng Y. Lin, Hamid Eisazadeh, Alok K. Verma

Engineering Technology Faculty Publications

This paper describes the development of a short course of Geometric Dimensioning and tolerancing (GD&T) for Mechanical Engineering (ME)/Mechanical Engineering Technology (MET) students in their freshman/sophomore classes. This class-infusion project was assisted and validated by an ASME Standards and Certification Engineer and was jointly sponsored by the ASME Committee on Engineering Education and the ASME Council on Standards and Certification. To assess the performance of the project, an instrument was developed with multiple-choice problems and survey questions for the students. The results of a field test in a sophomore manufacturing class are presented. The module is available at the ASME …

What Do Undergraduate Engineering Students And Preservice Teachers Learn By Collaborating And Teaching Engineering And Coding Through Robotics?, Jennifer Jill Kidd, Krishnanand Kaipa, Samuel J. Jacks, Stacie I. Ringleb, Pilar Pazos, Kristie Gutierrez, Orlando M. Ayala, Lillian Maria De Souza Almeida

Teaching & Learning Faculty Publications

This research paper presents preliminary results of an NSF-supported interdisciplinary collaboration between undergraduate engineering students and preservice teachers. The fields of engineering and elementary education share similar challenges when it comes to preparing undergraduate students for the new demands they will encounter in their profession. Engineering students need interprofessional skills that will help them value and negotiate the contributions of various disciplines while working on problems that require a multidisciplinary approach. Increasingly, the solutions to today's complex problems must integrate knowledge and practices from multiple disciplines and engineers must be able to recognize when expertise from outside their field can …

Work-In-Progress: Augmented Reality System For Vehicle Health Diagnostics And Maintenance, Yuzhong Shen, Anthony W. Dean, Rafael Landaeta

Electrical & Computer Engineering Faculty Publications

This paper discusses undergraduate research to develop an augmented reality (AR) system for diagnostics and maintenance of the Joint Light Tactical Vehicle (JLTV) employed by U.S. Army and U.S. Marine Corps. The JLTV’s diagnostic information will be accessed by attaching a Bluetooth adaptor (Ford Reference Vehicle Interface) to JLTV’s On-board diagnostics (OBD) system. The proposed AR system will be developed for mobile devices (Android and iOS tablets and phones) and it communicates with the JLTV’s OBD via Bluetooth. The AR application will contain a simplistic user interface that reads diagnostic data from the JLTV, shows vehicle sensors, and allows users …

A Statistical Analysis Of The Unm Facets Design Identity & Beliefs Survey Data, Clarissa A. Sorensen-Unruh

Mathematics & Statistics ETDs

The NSF-funded FACETS (Formation of Accomplished Chemical Engineers for Transforming Society, NSF Award 1623105) grant aims to transform the undergraduate engineering experience in the Department of Chemical and Biological Engineering at the University of New Mexico to address attrition within engineering majors, especially among underserved populations (Brainard & Carlin, 1998). The UNM FACETS Design Identity & Beliefs survey, an assessment tool used as part of the research of the grant, generated the dataset used in this study. I performed several different statistical analyses on the dataset, including confirmatory factor analysis (CFA), principal component analysis (PCA), and cluster analysis. The …

Academic Honesty, Professional Integrity, And Undergraduate Engineering Students: Exploring The Connections, S. Amy Skyles, Jeffrey W. Jennings

Dissertations

One benefit of inculcating professionalism into engineering degree program curricula is a measure of the extent to which future practitioners adopt an engineering code of ethics (Abaté, 2011; Davis, 2006). Studies have indicated more dishonesty among engineering students than other groups of undergraduate learners, but the effects of technology on dishonesty in the classroom was not addressed (Bowers, 1964; McCabe et al., 2012). An explanatory, sequential mixed methods study was designed to explain to what degree course pedagogical practices and attitudes of civil, architectural and environmental engineering students of various academic levels (freshman/sophomore and senior) relate to academic dishonesty. The …

Graduate School Of Engineering And Management Catalog 2020-2021, Graduate School Of Engineering And Management, Air Force Institute Of Technology

AFIT Documents

The Graduate Catalog represents the offerings, programs, and requirements in effect at the time of publication.

An Examination Of The Role Of Spatial Ability In The Process Of Problem Solving In Chemical Engineering, Sheryl Sorby, Gavin Duffy, Norman Loney

Articles

Engineers often communicate with one another through drawings or sketches and understanding technical information through graphical representations is a skill necessary for engineering practice. Well-developed spatial skills are known to be important to understanding technical drawings and are therefore, important to success in engineering. Unfortunately, of all cognitive processes, spatial skills show robust gender differences, favouring males, which could contribute to the underrepresentation of women in engineering. In this research, we administered a test of spatial cognition to students enrolled in a common 3rd year course in chemical engineering . In a second session, students were given a set of …