Engineering Education Commons^™

Implementing Tablet Pcs In A Distance Learning Environment, Glenda Scales, Sharon Caraballo, James Groves, Rosalyn Hobson, Linda Vahala, Catherine Amelink

Electrical & Computer Engineering Faculty Publications

(First paragraph) The Commonwealth Graduate Engineering Program (CGEP) is a collaborative distance education program developed by leading Universities in the Commonwealth of Virginia. It is over 25 years old and its main goal is to deliver graduate engineering courses to qualified professionals located across the Commonwealth of Virginia. Traditionally, the courses delivered to students in this program are done through interactive video conferencing (IVC) technology and most students are required to drive to a physical location. However, an increasing number of working professionals are beginning to want more flexibility with the timing and locations of these classes. With these changes …

Graduate School Academic Catalog 2009-2010, Graduate School Of Engineering And Management, Air Force Institute Of Technology

AFIT Documents

The Graduate Catalog represents the offerings, programs, and requirements in effect at the time of publication.

Product Focused Freeform Fabrication Education, Frank W. Liou, Ming-Chuan Leu

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Presented in this paper is our experience of teaching freeform fabrication to students at the Missouri University of Science and Technology, and to high school students and teachers. The emphasis of the curriculum is exposing students to rapid product development technologies with the goal of creating awareness to emerging career opportunities in CAD/CAM. Starting from solid modeling, principles of freeform fabrication, to applications of rapid prototyping and manufacturing in industry sponsored product development projects, students can learn in-depth freeform fabrication technologies. Interactive course content with hands-on experience for product development is the key towards the success of the program.

The Party’S Over: Sustaining Support Programs When The Funding Is Done, John Gardner, Pat Pyke, Cheryl Schrader, Janet M. Callahan, Amy Moll

Mechanical and Biomedical Engineering Faculty Publications and Presentations

In the lifecycle of an engineering education grant, the phase where best practices are sustained and disseminated is perhaps the most crucial stage for maximizing impact. Yet this transition phase often receives the least attention as project team enthusiasm can wane, while funding tapers off, and faculty priorities are pulled in other directions. There are numerous obstacles associated with sustaining program changes, even those perceived as very valuable. Typical challenges are: What happens when the funding runs out? What grant-developed programs should be sustained by the university? Does the institution need to internally allocate resources in an annual budget large …

Graduate School Academic Catalog 2008-2009, Graduate School Of Engineering And Management, Air Force Institute Of Technology

AFIT Documents

The Graduate Catalog represents the offerings, programs, and requirements in effect at the time of publication.

Using Basic Computer Aided Drafting And Design Courses At The Freshman Level To Improve Technology Students Competitiveness In Obtaining Early Academic Career Internships, Anthony Dean, Mustafa Moustafa, Julie Moustafa

Engineering Technology Faculty Publications

Many students have the desire to have internships and part-time employment during their academic careers. Often students in their freshman and sophomore years in four year engineering and technology programs find it difficult to be competitive against more senior students for these positions. This paper discusses how students, in the Mechanical Engineering Technology (MET) program at ________________University, through taking CAD and Solid Modeling courses early in their academic careers are well suited to be competitive in obtaining internships and part time employment. This paper discusses the MET programs first two years’ curriculum and how it prepares the students to enter …

A General Engineering Technology Program In Motorsports Technology, Gary Crossman, Anthony Dean

Engineering Technology Faculty Publications

Southside Virginia, in particular the cities of Danville, Martinsville and the surrounding area, is the home of Virginia International Raceway and a rapidly growing motorsports industry. There is a strong need for educational opportunities to support manufacturing and related industries in this region. In the early 2000’s Patrick Henry Community College in Martinsville established an associate of applied science degree in Motorsports Technology to help meet the need for technical support personnel. As the industry has grown it has become evident that engineers and technologists are needed at the baccalaureate and masters levels. Old Dominion University (ODU), located in Norfolk, …

Training For Adjunct Faculty, Ronald Welch, Allen Estes, Carol Considine

Engineering Technology Faculty Publications

Professor, teacher, instructor, faculty member –all are cherished and incredibly important titles at any university. At the same time, every full-time faculty member knows that it took time to become a good teacher and that training and mentoring shortens the required train-up period. Members of the Civil Engineering Department Heads Council Executive Committee (DHCEC) have indicated that the American Society of Civil Engineers (ASCE) ExCEEd Teaching Workshop is a must have tool for developing new faculty. So why do we thrust a syllabus into the hands of adjunct faculty and wish them well – while it appears that some type …

Introducing The Engineering Technology Programs To All Incoming Freshmen Engineering And Technology Students–The Result Is Better For All, Gary Crossman, Anthony Dean

Engineering Technology Faculty Publications

The Department of Engineering Technology at Old Dominion University participates in a freshman engineering course sequence, along with four engineering departments in the Batten College of Engineering and Technology. The two course sequence, Exploring Engineering and Technology I and II, involve the five departments in teaching at least one five week module in each of the two courses. Each department generally involves the students in a basic design project related to its discipline. Since the Department of Engineering Technology has three main programs – Civil, Electrical, and Mechanical – it has elected to divide its five week segment into three …

Ab Initio : A New Concept In Engineering Education, A History Of The Design, Creation And Implementation Of A New School Of Engineering In Richmond, Virginia (1990-2000), Henry A. Mcgee Jr.

VCU University History Books

Dr. Henry A. McGee, Jr., Founding Dean Emeritus of the School of Engineering at Virginia Commonwealth University, chronicles the history of the School of Engineering through his term as Founding Dean, 1994–1999. McGee details the process of creating a program aimed to balance innovation and entrepreneurship.

The Predictive Validity Of The Afit Graduate Management Program Admission Requirements: A Reassessment And Extension, Sarah E. Woods

Theses and Dissertations

This research is based on the Air Force and AFIT balancing mission requirements of personnel needed for duty and training airmen in advanced studies. Currently, over 50% of AFIT students do not meet AFIT entrance requirements. The purpose of this research was to examine criteria to determine its predictability of graduate success, as measured by graduate GPA, as well as determine whether performance is different for students who require criteria to be waived. Current AFIT eligibility criteria include undergraduate GPA, GRE test scores, or GMAT test scores. Other variables examined in this study include: GRE-Analytical test scores; rank/grade; prior enlistment; …

Teaching Engineering Courses With Workbooks, Yaşar Demirel

Department of Chemical and Biomolecular Engineering: News Releases

Society expects that a modem college education will turn out students who are analytical. intellectually curious, culturally aware, employable, and capable of leadership. Some important skills needed for all degree programs are problem solving, communication (written and oral), team or group work, learning and information processing, and technology. Instructors feel rewarded and satisfied when they sense that they have made a difference in the life of a student.

Teaching Coupled Transport And Rate Processes, Yaşar Demirel

Department of Chemical and Biomolecular Engineering: News Releases

Coupling refers to a flux occurring without its primary thermodynamic driving force; for example, mass flux without a concentration gradient called the thermal diffusion is a well-known coupled process. Coupling also refers to a flux occurring in a direction opposite to the direction imposed by its driving force; for example, a mass flux can occur from a low to a high concentration region and is called the active transport or uphill transport, such as potassium and sodium pumps coupled to chemical energy released by the hydrolysis of adenosine triphosphate (ATP) in biological systems. Although the coupled processes seem to be …

Project-Based Freshmen Engineering Courses In Civil Engineering Technology, Vernon W. Lewis Jr., Carol L. Considine

Engineering Technology Faculty Publications

Old Dominion University (ODU) has developed two fundamental courses for freshmen engineering students. The first course introduces the fundamentals of the practice of engineering including innovation, creativity, design and manufacturing, commercialization, teaming skills, environmental impact, and ethics. The second course is an exploration of engineering and engineering technology disciplines with an emphasis on projects. The purpose of these courses is to engage the students in the application of engineering early in their course of study with the hope that their interest will be reinforced and the likelihood of their being retained as students will increase. The courses are divided into …

An Integration Of Pc Hardware & Software In Teaching Engineering Technology Courses, Steve Hsiung, Richard Jones

Engineering Technology Faculty Publications

As technology advances, the price of a PC drops dramatically. This trend has resulted in PCs that are complex, powerful, and very affordable. Today's PC is a popular and essential tool in teaching software programming course(s) in C, C++, Visual Basic, or Java, running commercial software supporting courses in circuit simulation/design or circuit board layout, and acting as a workstation to gain access to the Internet or LAN networks. In most Engineering Technology curricula there is a limited amount of linkage between those PC applications. The actual effort to merge the hard-gained knowledge of hardware & software concepts together through …

Admissions Criteria And Academic Performance In The Afit Graduate Cost Analysis Program, Kenneth R. Garwood

Theses and Dissertations

This research examined the admissions criteria used by the Air Force Institute of Technology (AFIT) to determine academic eligibility for the in-residence Graduate Cost Analysis (GCA) master's degree program. Using the cumulative graduate grade point average earned at AFIT as the measure of academic performance, comparisons were made between the predictive capability of the current criteria and other potential factors. Factors considered included scores from the Graduate Record Examination (GRE) and the Graduate Management Admissions Test (GMAT), undergraduate cumulative and math grade point averages, applicant's age and gender, ratings of the undergraduate school's admissions competitiveness, undergraduate degree type, and various …

The Predictive Validity Of The Afit Graduate Engineering And Environmental (Geem) Admission Requirements, Charles C. Zitzmann

Theses and Dissertations

Recognizing that a strong commitment to advanced technical and management education (Van Scotter, 1993, p. 1) serves to maintain the capability and strength of the United States Air Force (USAF), the Air Force Institute of Technology (AFIT) Graduate School of Engineering and Management (GSEM) offers a full-time, eighteen-month, Graduate Engineering and Environmental Management (GEEM) program to military officers and Department of Defense (DoD) civilian employees. The AFIT uses the applicant's undergraduate grade-point average (UGPA), Graduate Record Examination (GRE) General Test verbal and quantitative scores, and undergraduate mathematics course grade-point average (UMGPA) to select applicants for admission. This study analyzed how …

Prototype Development For A Leak-Preventive Toilet Flush System- An Met Senior Design (Capstone) Project, Cheng Y. Lin

Engineering Technology Faculty Publications

A senior design (Capstone) project for three mechanical engineering technology students at Old Dominion University is described. A prototype design is presented to perform the functional test of a leak-preventive toilet system. There are two major leaks in the toilet water tank. In the first case, leaking occurs when the seal in the water tank becomes aged. The leak is very easy to detect visually, since the outside of the tank and the floor becomes wet. In the second case, leak occurs when the flapper valve can't complete shut off the water, due to corrosion or damage of the rubber …

A Qfd Decision Model For Selecting Service, Teaching, And Research Opportunities, Paul Kauffmann, Abel Fernandez, Charles Keating

Engineering Management & Systems Engineering Faculty Publications

New faculty are confronted with a barrage of information reiterating the importance of performance in the "big three" areas: teaching, service, and research / publications. From the provost to the department head, an untenured faculty member faces strong and sometimes conflicting pressures to become involved in activities ranging from committee assignments to participation in department or university research programs. Often these opportunities come with little guidance, advice, or obvious linkage to long term success in the three pillar areas and ultimately tenure. New faculty are confronted with a complex decision problem for which there is unstructured information available to develop …

A Value Focused Thinking Approach To Academic Course Scheduling, Shane A. Knighton

Theses and Dissertations

In 1997, the School of Engineering of the United States Air Force Institute of Technology began exploring ways of automating the academic course scheduling process. The administration desired an expedient approach for course scheduling which supports the institute's mission of "providing scientific and technological education" to officers from all branches of military service, as well as international military forces. The scheduling approach needed to be flexible, efficient, and represent the institute's values and principles. Decision Analysis (DA) and specifically, Value Focused Thinking (VFT), is used to decompose the complex problem of academic course scheduling and determine the factors that are …

A Comparative Study Of The Perceived Educational Needs Of Iowa Merged Area Vii Manufacturers And Iowa Technical Educators, David D. Bradney

Dissertations and Theses @ UNI

This research was a descriptive pilot study that compared the perceptions of Iowa Merged Area VII manufacturers and Iowa technical educators regarding technical curricula, occupational skill certification, and drafting practices as these relate to Associate Degree programs in Mechanical Drafting and Design Technology. The problem was to determine what should be taught in two year technical curricula in Mechanical Drafting and Design Technology. The purpose of the study was to compare the perceived educational needs of Iowa Merged Area VII manufacturers and Iowa technical educators regarding the content of Mechanical Drafting and Design Technology curricula. The populations used for this …

The Role Of The Gso Program In The Space Operations Career Field, Gregory J. Beloyne

Theses and Dissertations

The number of Air Force officers graduating from the Air Force Institute of Technology's Graduate of Space Operations master's degree program is declining. Furthermore, the number of advanced academic degree jobs these officers fill within the Space Operations career field has been reduced. These events question the role the GSO program has in the Space operations career field. This research surveys the GSO populations to determine how useful their master's degrees have been in providing the skills and knowledge needed to fill the advanced degree positions. This research also addresses the number of officers entering the GSO program each year. …

A Comparison Of Minority And Non-Minority Engineering Students On Selected Personality And Program Variables, Thomas Mercer Collier Jr.

Theses and Dissertations in Urban Services - Urban Education

The purpose of this study was to investigate whether there are common characteristics associated with 226 Hispanic, African American, and White engineering students who persist at predominantly White colleges and universities. A personality profile of minority and non-minority engineering students was developed. Information regarding factors influencing choice of major, university, study, work and extracurricular involvement, possible reasons for withdrawal from college, awareness and satisfaction with student support services and selected academic courses was also compiled. Components of Minority Engineering Programs (MEPs) which are most used or valued by minority engineering students were identified.

Analysis of Variance identified four of the …

Factors Influencing Preparation Needed Of Future Industrial Technology Department Leaders In Higher Education, Rajendra L. Desai

Dissertations and Theses @ UNI

The object of this study was to help future industrial technology department leaders in higher education develop effective planning strategies and prioritize their preparation before they sought leadership positions in industrial technology. Two hundred fifty-four industrial technology department leaders in higher education from all over the United States were asked to respond to a questionnaire. A five point Likert-type scale was used to rate the importance of 58 statements identified from Marshall's (1984) study. One hundred sixty (62.99%) usable responses formed the basis of this study.

Mean values and standard deviations were determined for all the statements. The grand mean …

Curricular Trends In Four-Year Baccalaureate Degree Industrial Technology Programs, Clayton Ray Diez

Dissertations and Theses @ UNI

The intents of the research were to determine both curricular trends in four-year baccalaureate industrial technology programs and the role accreditation standards have on such trends. The purpose was to present implications for future curriculum development and to provide a framework and point of reference for both curriculum developers and standards writers.

From the literature review, questionnaire items were designed to answer four research questions. The instrument was validated by a jury process and data were collected from 60 respondents, organized and compiled using National Association of Industrial Technology curriculum categories. Chi square and descriptive statistics were used to analyze …

Fundamental Concepts Required By Electromechanical Technology Graduates For Entry-Level Employment In Related Industry, Julio R. Garcia

Dissertations and Theses @ UNI

The objective of this study was to determine the fundamental electromechanical concepts needed by electromechanical technology graduates to perform efficiently at the entry-level employment in related industry. An extensive review of the literature indicated that it was necessary to prepare electromechanical technologists with emphasis given to the area of electrical/electronics technology, mechanical technology, fluids, and fiber optics. Thusly prepared, these graduates would be able to service modern industrial equipment and would have greater opportunities in the job market than at present.

A Likert format questionnaire was developed to gather the necessary data. The survey instrument consisted of 91 concept statements …

The Importance Of Computer-Based Subject Matter Topics For Graduates Of An Undergraduate Manufacturing Technology Program As Perceived By Practicing Manufacturing Engineers, Anthony Cecil Favre

Dissertations and Theses @ UNI

The problem of this study was to identify the perceptions of practicing manufacturing engineers regarding the importance of computer-based subject matter topics required for graduates of undergraduate manufacturing technology programs. This problem is reflective of the literature which indicates that there is a need for the further development of manufacturing science curricula in order to provide the types of knowledge needed in the emerging computer-based manufacturing field.

A questionnaire was used to collect data. It was mailed to 425 randomly selected practicing manufacturing engineers. Thirteen were returned as undeliverable, thus reducing the number to 412. The size of the sample …

Engineering Education, Australian Council For Educational Research

Information Bulletin 1945-1951

In 1946 Mr K. S. Lennie, of Sydney Technical College conducted a survey of opinion on Professional Engineering Education in Australia. He submitted a questionnaire to 200 representative individuals concerned with engineering including graduate and non-graduate engineers, senior and junior engineers, university and technical college teachers, and industrialists, government and private, representing both civil and mechanical engineering. Replies were received from 41% of those approached, and from an analysis of those replies the conclusions were reached which are presented in this bulletin.