Engineering Education Commons^™

Supporting Mechanistic Reasoning In Domain-Specific Contexts, Paul J. Weinberg

Journal of Pre-College Engineering Education Research (J-PEER)

Mechanistic reasoning is an epistemic practice central within science, technology, engineering, and mathematics disciplines. Although there has been some work on mechanistic reasoning in the research literature and standards documents, much of this work targets domain-general characterizations of mechanistic reasoning; this study provides domain-specific illustrations of mechanistic reasoning. The data in this study comes from the Assessment of Mechanistic Reasoning Project (AMRP) (Weinberg, 2012), designed using item response theory modeling to diagnose individuals’ mechanistic reasoning about systems of levers. Such a characterization of mechanistic reasoning illuminates what is easy and difficult about this form of reasoning, within the subdomain of …

Latinx And Caucasian Elementary School Children’S Knowledge Of And Interest In Engineering Activities, Gamze Ozogul, Cindy Faith Miller, Martin Reisslein

Journal of Pre-College Engineering Education Research (J-PEER)

Ethnic minorities, such as Latinx people of Hispanic or Latino origin, and women earn fewer engineering degrees than Caucasians and men. With shifting population dynamics and high demands for a technically qualified workforce, it is important to achieve broad participation in the engineering workforce by all ethnicities and both genders. Previous research has examined the knowledge of and interest in engineering among students in grades five and higher. In contrast, the present study examined elementary school students in grades K–5. The study found that older students in grades 4 and 5 had both greater knowledge of engineering occupational activities and …

Calculus Reform: Increasing Stem Retention And Post-Requisite Course Success While Closing The Retention Gap For Women And Underrepresented Minority Students, Doug Bullock, Janet Callahan, Jocelyn B. S. Cullers

Mathematics Faculty Publications and Presentations

Boise State University (BSU) implemented an across-the-board reform of calculus instruction during the 2014 calendar year. The details of the reform, described elsewhere (Bullock, 2015), (Bullock 2016), involve both pedagogical and curricular reform. Gains from the project have included a jump in Calculus I pass rate, greater student engagement, greater instructor satisfaction, a shift toward active learning pedagogies, and the emergence of a strong collaborative teaching community. This paper examines the effects of the reform on student retention. Since the curricular reform involved pruning some content and altering course outcomes, which could conceivably have negative downstream impacts, we report on …

Preliminary Findings Using Growth Mindset And Belonging Interventions In A Freshman Engineering Class, Jinny Rhee, Camille Johnson, Clifton Oyamot

Faculty Publications, Mechanical Engineering

Engineering is typically plagued with lower graduation rates and larger achievement gaps compared to other majors; the projected demand for its future graduates lends to the urgency in reversing these trends. Holding a growth mindset, or a belief that intelligence is mutable, and a feeling of belongingness are keys to persisting in and graduating from college. In prior research, improvements in retention and graduation rates have been found following minor interventions, particularly among some underrepresented populations of students. The current study explored whether similar interventions could be effective in increasing retention and graduation rates among underrepresented populations of engineering and …

Flipping Stem Classrooms Collaboratively Across Campuses In California, Laura Sullivan-Green, Ravisha Mathur, Andrew Feinstein

Office of the Provost Scholarship

San José State University, in partnership with California State University-Los Angeles and Cal Poly Pomona, was awarded a prestigious 2015 First in the World grant, sponsored by the Department of Education. The multi-campus effort is focused on bringing the flipped classroom model to seven STEM gateway courses over three years that have high failure rates through collaborative efforts from faculty on the three partner campuses. SJSU, CSULA, and CPP are all designated Hispanic-Serving Institutions and Minority-Serving Institutions, though their demographics are very different. High impact practices like the flipped classroom approach have been shown to increase URM student success and …

Effect Of Cohorts On Student Retention In Engineering, Patricia Backer, Cindy Kato

Faculty Publications

Project Succeed is a campus-wide initiative funded by the U.S. Department of Education. Its focus is to improve the 5-year graduation and retention rates and close the achievement gap for Under-Represented Minorities (URMs) across all majors at San José State University (SJSU). There are three major goals: strengthen SJSU’s core academic performance in retention and graduation; provide an improved supportive environment for URM students; and enhance the delivery and integration of academic and co-curricular support services. For Fall 2015, newly matriculated students in the College of Business, College of Engineering, and Child and Adolescent Development Department (CHAD) were assigned schedules …

Assessing Stem Literacy In An Informal Learning Environment, Maureen Ann Lafemina Cavalcanti

Theses and Dissertations--Education Sciences

This mixed methods study investigated methods for assessing STEM literacy amongst middle grades students participating in an informal learning environment, specifically, a summer STEM camp. Adopting a situated perspective on STEM literacy, this dissertation employed psychometric techniques and discourse analysis to answer the overarching research question: How can STEM literacy amongst middle school students be assessed in the context of a summer STEM camp? An integrated review of literacy within and across STEM disciplines first offered a new direction for conceptualizing STEM literacy. With this understanding, subsequent research methods applied novel approaches for investigating STEM literacy in the context of …

Development Of A Problem-Based Learning Matrix For Data Collection, Shannon M. Sipes

Interdisciplinary Journal of Problem-Based Learning

Few of the papers published in journals and conference proceedings on problem-based learning (PBL) are empirical studies, and most of these use self-report as the measure of PBL (Beddoes, Jesiek, & Borrego, 2010). The current study provides a theoretically derived matrix for coding and classifying PBL that was objectively applied to official curriculum documentation in a content analysis. The results for the level of problem-based learning in two engineering program curricula are presented. By introducing such a matrix, this study offers a tool that can be applied by other scholars examining PBL, creating consistency in methodology, definitions, and language among …

Leveling The Playing Field: Teacher Perception Of Integrated Stem, Engineering, And Engineering Practices, Bridgette Fincher

Graduate Theses and Dissertations

The purpose of this study was to describe the perceptions and approaches of 14 third-through-fifth grade Arkansan elementary teachers towards integrative engineering and engineering practices during 80 hours of integrated STEM professional development training in the summer and fall of 2014. This training was known as Project Flight. The purpose of the professional development was to learn integrated STEM content related to aviation and to write grade level curriculum units using Wiggins and McTighe’s Understanding by Design curriculum framework. The current study builds upon on the original research.

Using a mixed method exploratory, embedded QUAL[quan] case study design and a …

Status Of Nuclear Security Education And Research In Bangladesh And Looking Forward, Md. Shafiqul Islam, Md. Mobasher Ahmed

International Journal of Nuclear Security

Bangladesh uses category I of nuclear materials and category 1-5 of radioactive materials in the field of research, medical and industries. The Government is going to implement its first nuclear power plant under an IGA between the Bangladesh and Russian Governments. With the emerging global nuclear and radiological terrorism by potential adversaries, enhancing nuclear security is the paramount importance for the country. The paper has found no established communication channels among stakeholders in order to work in a coordinated and collaborative manner for strengthening the nuclear security. This has resulted lacking importance of education, research, training and knowledge management initiatives …

Longitudinal Success Of Calculus I Reform, Doug Bullock, Kathrine E. Johnson, Janet Callahan

Mathematics Faculty Publications and Presentations

This paper describes the second year of an ongoing project to transform calculus instruction at Boise State University. Over the past several years, Calculus I has undergone a complete overhaul that has involved a movement from a collection of independent, uncoordinated, personalized, lecture-based sections, into a single coherent multi-section course with an activelearning pedagogical approach. The overhaul also significantly impacted the course content and learning objectives. The project is now in its fifth semester and has reached a steady state where the reformed practices are normative within the subset of instructors who might be called upon to teach Calculus I. …

Assessment Of A Writing Workshop Model For First-Year Engineering Students, Patricia Backer

Faculty Publications

This paper will report on a multi-year project to improve the writing skills of engineering freshmen at XXX University. For the last ten years, the college has offered an optional class to students who are not proficient in writing. Students can enroll in a one-unit lab class as many semesters as they wish to get practice in writing. The goal is to provide students with weekly writing activities that include: instruction in basic grammar, proofreading, and editing. In addition to study and practice exercises, students in this writing workshop have writing assignments, which provide practice in using correct grammar, spelling, …

Energy3d: Guiding Engineering Design With Science Simulations, Chandan Dasgupta, Alejandra J. Magana, Lisa Kirkham

Purdue P-12 Networking Summit & Poster Session

The Purdue P-12 Networking Summit gives Purdue faculty and staff engaged with P-12 schools a forum to interact with each other, share ideas, and develop collaborations that make programs more effective. Faculty and staff are invited to attend.

Revealing Student Misconceptions And Instructor Blind Spots With Muddiest Point Formative Feedback, Cindy Waters, Stephen J. Krause, Janet Callahan, Barry Dupen, Mary B. Vollaro, Peggie Weeks

Materials Science and Engineering Faculty Publications and Presentations

Of interest to all engineering disciplines, well-designed formative feedback has the potential to enhance both instructor teaching and student learning. Delivering fundamental courses year after year, can ultimately lead faculty to use stale notes or slides from past years. This approach may save time, but does not meet the shifting needs of our students who have high expectations from their instructors. One simple method to improve teaching is to employ muddiest point reflections. Muddiest point reflections involve simply asking students to anonymously reflect on what was “muddy”, i.e. confusing, during class and to rank their level of confusion which not …

Teacher Beliefs About Motivating And Teaching Students To Carry Out Engineering Design Challenges: Some Initial Data, James P. Van Haneghan, Susan A. Pruet, Rhonda Neal-Waltman, Jessica M. Harlan

Journal of Pre-College Engineering Education Research (J-PEER)

The present study examines middle school teachers’ beliefs about seven learning outcomes related to a project that involves developing and examining the effects of a set of engineering design modules constructed for use by middle school math and science teachers. Overall, the teachers involved in the intervention appear to believe they have the instructional skills, professional development, and resources to carry out the modules. Teachers from all of the schools (both intervention and comparison schools) for the most part valued the outcomes as important. Results of the study indicate that, although teachers believe they value and can obtain most of …

Priming Middle School Females’ Engagement In Engineering And Technology, Mary Bonk Isaac

STEMPS Theses & Dissertations

The purpose of this study was to validate data collected between 2009-2013 via an instrument used to assess middle school girls’ identification with and interest in engineering and technology following the Society of Women Engineers’ WOW events. Recognizing the importance of measuring the impact of such mentored E & T activities on young females’ attitudes about and interest in STEM, and more specifically, engineering and technology, SWE outreach experts developed a participant survey based on event objectives and domain knowledge, but never rigorously examined whether it produced statistically valid data that could be used to draw inferences about girls’ propensity …

Evolution Of A First-Year Engineering Course, Noah Salzman, Janet Callahan, Gary Leroy Hunt, Carol Sevier, Amy J. Moll

Electrical and Computer Engineering Faculty Publications and Presentations

The first-year engineering course at Boise State University has evolved significantly over the past decade as a result of continuous improvement with a particular focus on student retention. The course was originally created in 1999-2001 as an “Introduction to Engineering” course in order to recruit students to one of the fields of engineering, by introducing those fields of engineering as topics across the semester. Over the first ten years, the course continued that introductory-to-field focus while also introducing a significant design element solving openended engineering problems. As a result of a five-year grant aimed toward improving first-year retention, the first-year …

Work Integrated Learning In Stem In Australian Universities: Final Report: Submitted To The Office Of The Chief Scientist, Daniel Edwards, Kate Perkins, Jacob Pearce, Jennifer Hong

Higher education research

The Australian Council for Educational Research (ACER) undertook this study for the Office of the Chief Scientist (OCS). It explores the practice and application of Work Integrated Learning (WIL) in STEM, with a particular focus on natural and physical sciences, information technology, and agriculture departments in Australian universities. The project involved a detailed ‘stocktake’ of WIL in practice in these disciplines, with collection of information by interview, survey instruments, consultation with stakeholders and literature reviews. Every university in Australia was visited as part of this project, with interviews and consultation sessions gathering insight from more than 120 academics and support …

Global Technology Experiences For Upper-Division Engineering Students: An Assessment, Patricia Backer, Wenchiang Chung

Faculty Publications

In order for students to thrive in the highly competitive global economy, it is critical for them to develop international perspectives and appreciation. As a result, in 2004, the San Jose State University’s Charles W. Davidson College of Engineering established a one-million-dollar Global Technology Initiative (GTI) program. The mission of the GTI program is to expand students’ horizons about the opportunities and challenges of a global economy, to expose them to global, environmental, and energy problems in which technology plays a central role, to motivate their learning of global issues and different cultures, and to introduce them to a more …

Difficulty As A Concept Inventory Design Consideration: An Exploratory Study Of The Concept Assessment Tool For Statics (Cats), Dana L. Denick

Open Access Dissertations

The ability for engineering students to apply mathematic, scientific and engineering knowledge to real-life problems depends greatly on developing deep conceptual knowledge that structures and relates the meaning of underlying principles. Concept inventories have emerged as a class of tests typically developed for use in higher education science and engineering courses. Concept Inventories (CIs) are multiple-choice tests that are designed to assess students' conceptual understanding within a specific content domain. For example, the CI explored within this study, the Concept Assessment Tool for Statics (CATS) is intended to measure students' understanding of the concepts underlying the domain of engineering statics. …

Large Research Center Education And Outreach: Lessons From 5 Years Of Distributed Collaborative Design, Development And Implementation, Sean Brophy, Thalia Anagnos

Faculty Publications

Paper from the 121st ASEE Annual Conference, Indianapolis. The George E. Brown, Jr. Network for Earthquake Engineering Summation (NEES) completes its tenth year of operation in September 2014. The NEES Center consists of a network of 14 large-scale experimental laboratories that collaborate and share resources in support of research to inform civil engineering practice and reduce losses from future earthquakes. Since the development of the center in 2003, the education, outreach and training (EOT) program has grown from a federation of local outreach activities to an integrated network of “specialists” working together to obtain significant impact towards defined education goals. …

Creating A Stem Identity: Investment With Return, Janet Callahan, Patricia Pyke, Susan Shadle, R. Eric Landrum

Materials Science and Engineering Faculty Publications and Presentations

Establishing a strong STEM (science, technology, engineering and mathematics) identity at Boise State University, a metropolitan campus with approximately 3,655 undergraduate STEM students and a total undergraduate enrollment of approximately 19,042 (16,136 FTE) has been an important step toward creating a climate conducive to facilitating fundamental change. Examples of such change include building collaborations among faculty within and across departments, establishing the identity of students as part of a community beyond their chosen major, improving the efficiency and effectiveness of university systems, and perhaps most importantly, developing a framework to think deliberately about ways to effect change. This paper is …

Focus Groups For Informing Awpa’S Engineering Workforce Study 2014: Final Report, Daniel Edwards, Jacob Pearce, Kate Perkins, Justin Brown

Higher education research

This report highlights the findings of a project undertaken by the Australian Council for Educational Research (ACER) for the Australian Workplace and Productivity Agency (AWPA) that will contribute to a wider study of the Engineering Workforce. The project involved the development, coordination, implementation of focus groups and the reporting of outcomes in a way that generates first-hand information about the experiences and attitudes of specific groups of people in relation to the engineering labour market – women, mature-age workers and new graduates. The work here also explored the views of the next generation of engineers, gathering information from school students …

Spatial Visualization Ability And Impact Of Drafting Models: A Quasi Experimental Study, Petros J. Katsioloudis, Vukica Jovanovic

STEMPS Faculty Publications

A quasi experimental study was done to determine significant positive effects among three different types of visual models and to identify whether any individual type or combination contributed towards a positive increase of spatial visualization ability for students in engineering technology courses. In particular, the study compared the use of different visual models - a 3D printed solid object, a 3D computer generated drawing and a 2D drawing.

Improving Enrollment In The Construction Management Graduate Program Through Students’ Perspectives, Mouloud Messaoudi

Master of Technology Management Plan II Graduate Projects

Low enrollment and the decrease in graduation and retention rates are challenges facing the growth of the Master’s in Technology Management – Construction Management (MTM-CM) program at BGSU. In addition, the competition between the universities to enroll and retain more in-state, out-of-state, and international students is aggressive. There is a need for a revaluation for the MTM-CM program in order to attract more students in the future. This study is a necessary step to know what the MTM-CM students think about the product delivered to them at BGSU. There was no prior study investigating the satisfaction level of the construction …

The Importance Of Formative Assessment In Science And Engineering Ethics Education: Some Evidence And Practical Advice, Matthew W. Keefer, Sara E. Wilson, Harry Dankowicz, Michael C. Loui

School of Engineering Education Faculty Publications

Recent research in ethics education shows a potentially problematic variation in content, curricular materials, and instruction. While ethics instruction is now widespread, studies have identified significant variation in both the goals and methods of ethics education, leaving researchers to conclude that many approaches may be inappropriately paired with goals that are unachievable. This paper speaks to these concerns by demonstrating the importance of aligning classroom-based assessments to clear ethical learning objectives in order to help students and instructors track their progress toward meeting those objectives. Two studies at two different universities demonstrate the usefulness of classroom-based, formative assessments for improving …

Quantitative Assessment Of Program Outcomes Using Longitudinal Data From The Fe Exam, Joe C. Guarino, James R. Ferguson, V. Krishna C. Pakala

Mechanical and Biomedical Engineering Faculty Publications and Presentations

There have been many studies providing details on using results from the Fundamentals of Engineering (FE) exam as metrics for meeting ABET program outcomes¹. However, implementing an FE-based set of metrics poses challenges not limited to assessing validity of results. Programs using FE-based metrics must also determine the position of the metrics in the overall assessment process. We present a method for using FE-based metrics as an integral part of the ABET program assessment process. The principle issues we address are: (1) The validity of using FE metrics for a group of graduating students when not all of …

What Value Does Service Learning Have On Introductory Engineering Students' Motivation And Abet Program Outcomes?, Carol Sevier, Seung Youn Chyung, Janet Callahan, Cheryl Schrader

Organizational Performance and Workplace Learning Faculty Publications and Presentations

A quasi-experimental study was conducted to investigate the effectiveness of using a service learning (SL) method on influencing introductory engineering students' motivation and ABET program outcomes, compared to the effectiveness of using a conventional, non-service-learning (NSL) method. The sample used in the study was 214 students enrolled in an Introduction to Engineering course at a medium-size university in the northwestern region of the U.S. during the fall semester of 2009 and the spring semester of 2010. Sixty-nine students completed SL projects while 145 students completed NSL projects. Both SL and NSL projects were team-based. Using the ARCS model as a …

Global Technology Initiative At San Jose State University: Results Of Seven Years Of An International Experience For Students, Belle Wei, Patricia Backer, Wenchiang Chung, Andrew Wood

Faculty Publications

For XXX students to thrive in the highly competitive global economy, it is critical to develop international perspectives and knowledge. The $1 million Global Technology Initiative (GTI), established in 2004, provides SJSU students with an opportunity to gain a global perspective of the world by learning about technology and business developments in the Asia Pacific region. GTI donors are high-tech business leaders with strong business ties in Silicon Valley and the Asia Pacific region. Given the current trend of engineering globalization in the global economy, particularly the trend of outsourcing Silicon Valley manufacturing, development, and design work to foreign countries, …

What Are The Characteristics Of A Scholar?, Andreas Tolk

Computational Modeling & Simulation Engineering Faculty Publications

No abstract provided.