Engineering Education Commons^™

Teaching Learning Newsletter Vol 2 Issue 2, Sastra Deemed To Be University

TLC Newsletter

No abstract provided.

Increasing The Effectiveness Of K-12 Stem Worshops Through Targeted Context And Creative Technolgies, Melina Lopez

Master's Theses

Economic projections reveal a need for one million more Science, Technology, Engineering, and Math (STEM) professionals over the next decade than the United States is producing at the current rate. As a result, STEM education is a major focus of recent legislation and funding in Congress as the number of STEM professionals is inadequate to support innovation and the ever-changing economy. In response to the urgent need for more competitive STEM professionals, there has been a widespread implementation of workshops, organizations, and school programs aimed at amplifying K-12 student STEM literacy and interest. Some programs are even created to specifically …

Teaching Learning Newsletter Vol 2 Issue 1, Sastra Deemed To Be University

TLC Newsletter

No abstract provided.

Reconfigurable Modules For Automatic Creating Robotic Courses, Ana Djuric, Vukica Jovanovic

Engineering Technology Faculty Publications

The main objective of this paper is to describe a teaching tool that can be used for automated creation of different problems that can be used for assessing student knowledge while teaching industrial robotics courses. These materials can be used for instructors who need to create customized questions and answers for different student homework. Wayne State University, Detroit, MI offer different industrial robotics and courses related to fundamental robotic theory: kinematics, dynamics, and control. Old Dominion University, Norfolk, VA offers the course in Introduction to Industrial Robotics. Both programs are Mechanical Engineering Technology under the Engineering Technology departments / division. …

Insights From Two Decades Of P-12 Engineering Education Research, Cary I. Sneider, Mihir K. Ravel

Journal of Pre-College Engineering Education Research (J-PEER)

The 21st century has seen a growing movement in the United States towards the adoption of engineering and technology as a complement to science education. Motivated by this shift, this article offers insights into engineering education for grades P-12, based on a landscape review of 263 empirical research studies spanning the two decades from January 2000 to June 2021. These insights are organized around three core themes: (1) students’ understandings, skills, and attitudes about engineering and technology; (2) effective methods of P-12 engineering education; and (3) benefits of P-12 engineering education. The insights are captured in the form of evidence-based …

Transforming Technology & Engineering Educator Inputs Into Desired Student Outputs Through Mechanism Analysis And Synthesis, Andrew J. Hughes, Chris Merrill

Educational Leadership & Technology Faculty Publications

The intention of this article is to provide middle and high school Technology and Engineering Educators (T&EEs) with a more thorough understanding of an engineering approach to the teaching and learning of mechanics. During the teaching and learning of engineering content, in this case mechanics, the educator should attempt to align pedagogical content knowledge with engineering content knowledge and practices. T&EEs will also need to focus on terminology, structure, and applying theory to practical hands-on learning activities inside and outside of the classroom. T&EEs have the potential to foster middle and high school students’ mechanical knowledge and the ability to …

Design-Based Research: Students Seeking Co-Op In Refined Educational Model, Dennis Rogalsky, Ron Ulseth

Integrated Engineering Department Publications

This research paper continues a longitudinal implementation of a design-based research (DBR) study/implementation for a new co-op centric educational model. This is a benchmarking study by the university program.

The new model is an adaptation of two recently recognized (by a 2018 MIT report) emerging world-leading engineering educational models, Charles Sturt University (Australia) and Iron Range Engineering (Minnesota). Adapted from Charles Sturt is the co-op model whereby students spend an initial on-campus period and then combine co-op work placements and on-line learning all the way to degree completion. Adapted from Iron Range are the curricular strategies that empower a graduate …

The Influence Of Participation In A Multi-Disciplinary Collaborative Service Learning Project On The Effectiveness Of Team Members In A 100-Level Mechanical Engineering Class, Stacie I. Ringleb, Pilar Pazos, Julia Noginova, Francisco Cima, Orlando Ayala, Krishnanand Kaipa, Jennifer Kidd, Kristie Gutierrez

Mechanical & Aerospace Engineering Faculty Publications

Engineers need to develop professional skills, including the ability to work successfully in teams and to communicate within and outside of their discipline, in addition to required technical skills. A collaborative multi-disciplinary service learning project referred to as Ed+gineering was implemented in a 100-level mechanical engineering course. In this collaboration, mechanical engineering students, primarily in the second semester of their freshman year or first semester of their second year, worked over the course of a semester with education students taking a foundations course to develop and deliver engineering lessons to fourth or fifth graders. Students in comparison engineering classes worked …

Scaffolding Middle And High School Students’ Engineering Design Experiences: Quality Problem-Scopeing Promoting Successful Solutions, Andrew Hughes, Cameron Denson

Educational Leadership & Technology Faculty Publications

Highly proficient expert engineers begin the iterative process of design by thoroughly investigating the design problem. Engineering students are often distracted by surface details, leading to a faulty conception of the problem and inappropriate solution strategies. Adequate problem-scoping is arguably the most important step in the design process. To address this issue, the researchers developed an instructional framework to help teachers scaffold students’ cognitive and metacognitive processes during the problem-scoping phase of a design challenge. The purpose of this quasi-experimental study was to investigate the impact that scaffolded instruction related to the SCOPE process had on students’ solution success during …

A Statistical Analysis Of The Unm Facets Design Identity & Beliefs Survey Data, Clarissa A. Sorensen-Unruh

Mathematics & Statistics ETDs

The NSF-funded FACETS (Formation of Accomplished Chemical Engineers for Transforming Society, NSF Award 1623105) grant aims to transform the undergraduate engineering experience in the Department of Chemical and Biological Engineering at the University of New Mexico to address attrition within engineering majors, especially among underserved populations (Brainard & Carlin, 1998). The UNM FACETS Design Identity & Beliefs survey, an assessment tool used as part of the research of the grant, generated the dataset used in this study. I performed several different statistical analyses on the dataset, including confirmatory factor analysis (CFA), principal component analysis (PCA), and cluster analysis. The …

Teaching Learning Newsletter Vol 1 Issue 1, Sastra Deemed To Be University

TLC Newsletter

No abstract provided.

Maker Fridays: Engaging Rural And Underrepresented High School Students In Pre-Engineering Design And Creativity, Michelle Howell-Smith, Kirstie Bash

Nebraska Center for Research on Children, Youth, Families, and Schools: Faculty Publications

The engineering field struggles to develop sufficient interest and sustained participation across underrepresented demographic groups including women and individuals from rural, Hispanic, or Native American origin. It is critical to foster interest in engineering during formative years when students are deciding career paths. Northeast Community College (Northeast) addressed the shortage of diverse students entering into engineering fields by developing a course to engage rural and underrepresented high school students in maker design and creativity and to determine best practices that attract and retain these students. The Maker Fridays pre-engineering course was part of the Fridays@Northeast program that targets high school …

Why Do I Have To Know This? Engineering In A Globalized Society, Caleb Cunningham

Honors Theses

Through a pilot comparative study, this thesis examines the problem-solving of chemical engineering students and chemical engineering faculty. Specifically, the thesis examines the extent to which individuals include global factors (cultural, social, environmental, and economic) into their engineering solutions as specified by ABET. Several hypotheses were investigated in this pilot study: (i) having a study abroad experience would increase the likelihood that participants included the global factors of interest, (ii) the type (PUI, Research Intensive, Unique) of institution students attended would impact how individuals approached the problem, (iii) students with similar career aspirations would approach the problems similarly, (iv) having …

Iron Range Engineering - An Overview Of Design And Open-Ended Problem Solving Activities In An Interdisciplinary, Project-Based Learning Program, Elizabeth Pluskwik

Integrated Engineering Department Publications

Project-based learning (PBL) in engineering education is growing at a rapid pace. The Iron Range Engineering (IRE) Program of Minnesota State University Mankato, is an upper division (3rd and 4th year) undergraduate engineering education program based on the Aalborg, Denmark PBL model. Students work in teams to solve industry-sourced projects each semester. The learning of engineering is accomplished in three domains - technical learning of engineering concepts, professionalism, and design, which we call the “three-legged stool” of engineering education. The program promotes entrepreneurial mindset and innovative open-ended problem-solving in context. Fifty students are enrolled in 3rd and 4th-year studies at …

Engineering Students’ Perceptions Of Belongingness In Civil Engineering, Lisa Benson, Candice Bolding, Jennifer Harper Ogle, Catherine Mcgough Spence, Joseph Murphy, Rachel Lanning

Integrated Engineering Department Publications

Prior research shows that engineering students with low feelings of belongingness tend to switch to non-technical majors. With the understanding that aspects of student motivation, identity, and personality, as well as their academic performance, affect their sense of community in engineering, this study seeks to assess these student attributes over time. The context for this study is a single civil engineering program that is undergoing both curricular and cultural changes as part of an NSF-funded project. The data and findings presented here are part of a larger study of how student attitudes and beliefs change during their experiences in a …

An Exploratory Study Of Engineering Students’ Misconceptions About Technical Communication, Cheryl Q. Li, Judy Randi, Jenna Sheffield

Engineering and Applied Science Education Faculty Publications

This paper reports results of a mixed methods study that examined engineering students’ acquisition of technical communication skills over time. In particular, this exploratory study aimed to identify persistent errors, lingering misconceptions, and challenges engineering students faced when they attempted to apply their knowledge and skills in new contexts. The 12 participants were drawn from engineering courses in which students were required to compose technical memoranda in response to requests for information from supervisors or clients. This integrated approach addresses content and communication in the same course. The study included a longitudinal analysis of four technical memoranda written across two …

Motivating Students For Learning Using Scaffolding And A Variety Of Assignments, Nadiye O. Erdil

Engineering and Applied Science Education Faculty Publications

This paper discusses the impacts of various course assignments and activities that were used to increase student motivation and learning. The courses selected for the study are Quality Analysis and Design of Experiments courses, which are offered as required courses in the industrial engineering graduate program at the University of New Haven. The assignments and activities include term project, term paper, homework, in-class exercises, quizzes, exams, library training and factory visit. In an earlier pilot study in the Quality Analysis course, scaffolding -an instructional strategy that enables students to build on prior experience and knowledge as they work towards mastering …

Easy Exam, Sarthak Dabhi

Electronic Theses, Projects, and Dissertations

Easy Exam is web-based educational software which allows professors to take and students to give exams. This project focuses on making an effortless process for professors to make an exam, to grade exams for all students, and to create class statistical analysis reports about all exam-taking students. At the end of the exam, students can see their report with analytics based on topics in the exam. This web-based software will help students to identify their weaknesses and strengths. So, students can focus on their weaknesses and improve their knowledge. Furthermore, this software will help the professors to identify which students …

Report From The Stem 2026 Workshop On Assessment, Evaluation, And Accreditation, Rebecca Bates, Angela Arnold, Cary Komoto, Peggy Brickman, R. Alan Cheville, Elizabeth Longley, Jose Mestre, Mihaela Sabin, James Warnock

Integrated Engineering Department Publications

A gathering of science, technology, engineering, and math (STEM) higher education stakeholders met in November 2018 to consider the relationship between innovation in education and assessment. When we talk about assessment in higher education, it is inextricably linked to both evaluation and accreditation, so all three were considered. The first question we asked was can we build a nation of learners? This starts with considering the student, first and foremost. As educators, this is a foundation of our exploration and makes our values transparent. As educators, how do we know we are having an impact? As members and implementers of …

Report From The Stem 2026 Workshop On Assessment, Evaluation, And Accreditation, Rebecca Bates, Angela Arnold, Cary Komoto, Peggy Brickman, R. Alan Cheville, Elizabeth Longley, Jose Mestre, Mihaela Sabin, James Warnock

Reports

A gathering of science, technology, engineering, and math (STEM) higher education stakeholders met in November 2018 to consider the relationship between innovation in education and assessment. When we talk about assessment in higher education, it is inextricably linked to both evaluation and accreditation, so all three were considered. The first question we asked was can we build a nation of learners? This starts with considering the student, first and foremost. As educators, this is a foundation of our exploration and makes our values transparent. As educators, how do we know we are having an impact? As members and implementers of …

Big Five Technologies In Aeronautical Engineering Education: Scoping Review, Ruth Martinez-Lopez

International Journal of Aviation, Aeronautics, and Aerospace

The constant demands that technology creates in aerospace engineering also influence education. The identification of the technologies with practical application in aerospace engineering is of current interest to decision makers in both universities and industry. A social network approach enhances this scoping review of the research literature to identify the main topics using the Big Five technologies in aerospace engineering education. The conceptual structure of the dataset (n=447) was analyzed from different approaches: at macro-level, a comparative of the digital technology identified by cluster analysis with the number of co-words established in 3 and 8 and, a keyword central structure …

An Investigation Of Engineering Design Cognition And Achievement In Primary School, Greg J. Strimel, Scott R. Bartholomew, Eunhye Kim, Liwei Zhang

Faculty Publications

This study examined the design cognition and achievement results of both kindergarten and fourth grade students engaged in engineering design-based instructional activities. Relationships between design cognition and student grade level, as well as quality of student work, were investigated. 30 concurrent think-aloud protocols were collected from individual primary students as they worked in groups to design and make a solution to a design task. The concurrent think-aloud protocols were examined and coded to determine the duration of time the participants devoted to a pre-established set of mental processes for technological problem solving. Significant differences between kindergarten and fourth grade participants …

Examination The Impact Of Various Factors On Student Success In An Introduction To Circuit Analysis Course, David Parent

Faculty Publications

In this work in progress, several models to predict student success in a sophomore introduction to circuit analysis class were created based on prior grade point average, grade in a pre-requisite physics class, the semester the pre-requisite physics class was taken, the number of units a student was taking, the number of times a student repeated the circuits class, and the number of times a student repeated any class prior to enrollment. While all models were statistically significant, the model that included prior GPA and the grade in a pre-requisite physics was the most significant for the data collection effort. …

Development Of A Placement Exam To Increase Student Success In A Junior Level Circuits And Systems Class, David Parent

Faculty Publications

In this work, which is intended to be a Full Paper in the Innovative Practice Category, the implementation of an improved placement exam that increased the pass rate in a junior level systems course in the author’s electrical engineering department by 15% is presented. For almost 30 years the author’s EE department has used a face to face exam to place students in a junior level circuits and systems course or into a review workshop. The details of the exam and suggestions about future use in conjunction MyOpenMath analytics to increase student success are also given.

Developing An Evaluation Tool To Examine Motivational Factors Of Non-Student Community Partnership Participants, Julia Thompson, Jinny Rhee

Faculty Publications, Mechanical Engineering

Research of engineering community engagement has primarily focused on the experiences and outcomes of students, yet it is often the faculty, administrators, and community partners who have a long-term commitment to the program’s success. In this study, we are developing and validating an assessment instrument that combines two previously identified aspects of community engagement programs: participant motivation and the nature of engagement relationships. Participant motivation refers to the reasons people stay engaged in the community engagement experience and can be categorized into: student learning and growth, personal and professional development, and benefits to the community organization. The nature of an …

Motivational Decline And Recovery In Higher Education Stem Courses, Anna M. Young, Paul J. Wendel, Joan M. Esson, Kathryn M. Plank

Education Faculty Scholarship & Creative Works

Decline in student motivation is a concern for STEM education, especially for underrepresented groups in the sciences. Using the Science Motivation Questionnaire II, 41 foundational STEM courses were surveyed at the beginning and end of each semester in an academic year at a small primarily undergraduate university. Significant pre- to post-semester declines were observed in each of five measured motivational factors (Intrinsic motivation, Career motivation, Self determination, Self-efficacy, and Grade motivation), with effect sizes ranging from 0.21 to 0.41. However, in the second semester pre-survey, four motivational factors rebounded, including three returning to initial levels, suggesting that the observed motivational …

A Comparative Analysis Of Holographic, 3d-Printed, And Computer-Generated Models: Implications For Engineering Technology Students' Spatial Visualization Ability, Petros J. Katsioloudis, Mildred V. Jones

STEMPS Faculty Publications

A number of studies indicate that the use of holographic displays can influence spatial visualization ability; however, research provides inconsistent results. Considering this, a quasi-experimental study was conducted to identify the existence of statistically significant effects on sectional view drawing ability due to the impacts of holographic displays. In particular, the study compared the use of three different types of displays: 3D printed model, computer generated model, and holographic model to determine whether a significant difference exists towards sectional view drawing ability, among engineering technology students. According to the results of this study, it is suggested that the impact of …

Impact Of First-Year Initiatives On Retention Of Students: Are There Differences In Retention Of Students By Ethnicity And Gender?, Patricia Backer, Joseph Green, Bryan Matlen, Cindy Kato

Faculty Publications

Project Succeed is a campus-wide initiative funded by the U.S. Department of Education. Its focus is to improve the 5-year graduation and retention rates and close the achievement gap for Under-Represented Minorities (URMs) across all majors at San José State University (SJSU). In addition, SJSU has a high percent of first generation students. We have several thrusts under this project: block scheduling, Faculty/Staff Mentor program, expanding Peer Educators, developing a First Year Experience Program, and developing more student living learning communities. This project is in its fourth year and we have analyzed each project effort with respect to its impact …

Life Is A Lab: Developing A Communication Research Lab For Undergraduate And Graduate Education, Autumn P. Edwards, Chad Edwards, Patric R. Spence

Journal of Communication Pedagogy

Tips offered center on classroom discourse, curriculum choices, and potential assignments. In this article, we present tips for creating a thriving undergraduate and graduate communication research lab. Based on our experiences developing and co-directing the Communication and Social Robotics Labs (CSRLs), we offer 10 best practices for acquiring resources and recognition, building a strong lab community, and attaining faculty and student goals for scholarship and beyond. Our overarching approach is framed by Dewey’s (1916) pragmatist educational metaphysic, which stresses student- and subject-centered learning, enlarging experiences, and the co-construction of meaning and knowledge. Although our labs are focused on human-machine communication …

Effectiveness Of Drafting Models For Engineering Technology Students And Impacts On Spatial Visualization Ability: An Analysis And Consideration Of Critical Variables, Petros J. Katsioloudis, Jill E. Stefaniak

STEMPS Faculty Publications

Results from a number of studies indicate that the use of drafting models can positively influence the spatial visualization ability for engineering technology students. However, additional variables such as light, temperature, motion and color can play an important role but research provides inconsistent results. Considering this, a set of 5 quasi-experimental studies, was conducted to identify additional critical variables. According to the results, a dynamic, 3Dprinted drafting model, presented with a blue background under lighting conditions between 500–750 lux had the highest impact on spatial visualization ability of engineering technology students.