Engineering Education Commons^™

Project-Based Freshmen Engineering Courses In Civil Engineering Technology, Vernon W. Lewis Jr., Carol L. Considine

Engineering Technology Faculty Publications

Old Dominion University (ODU) has developed two fundamental courses for freshmen engineering students. The first course introduces the fundamentals of the practice of engineering including innovation, creativity, design and manufacturing, commercialization, teaming skills, environmental impact, and ethics. The second course is an exploration of engineering and engineering technology disciplines with an emphasis on projects. The purpose of these courses is to engage the students in the application of engineering early in their course of study with the hope that their interest will be reinforced and the likelihood of their being retained as students will increase. The courses are divided into …

An Integration Of Pc Hardware & Software In Teaching Engineering Technology Courses, Steve Hsiung, Richard Jones

Engineering Technology Faculty Publications

As technology advances, the price of a PC drops dramatically. This trend has resulted in PCs that are complex, powerful, and very affordable. Today's PC is a popular and essential tool in teaching software programming course(s) in C, C++, Visual Basic, or Java, running commercial software supporting courses in circuit simulation/design or circuit board layout, and acting as a workstation to gain access to the Internet or LAN networks. In most Engineering Technology curricula there is a limited amount of linkage between those PC applications. The actual effort to merge the hard-gained knowledge of hardware & software concepts together through …

Assessment Methods For Comparison Of On-Camps And Distance Learning Laboratory Courses In An Engineering Technology Program, John R. Hackworth, Richard L. Jones

Engineering Technology Faculty Publications

Assessment methodology and results for two Electrical Engineering Technology laboratory courses are shown. In these cases, courses are offered in both the traditional on- campus and non-traditional distance learning format, assessment methods are prescribed, assessment data are taken, and the results compiled and compared. Student comments are included which also support the assessment data. In addition, this paper describes ways in which the laboratory courses are structured in order to make the assessment process easier to manage. Pedagogical issues are addressed that were encountered when constructing the distance learning laboratory courses to assure that the learning experience could equal or …

Involving Engineering With In-Service K-4 Teachers, Theresa M. Swift, Steve Eugene Watkins, Kristine Swenson, Evalee Lasater, Robert Mitchell

Electrical and Computer Engineering Faculty Research & Creative Works

A strong workforce in science and engineering and literate citizens in a technology-based society depends on an educational system that prepares students in science, mathematics, and engineering. Unfortunately, many K-12 students lose interest in such topics early in their school years. Engineering applications can capture the imagination of students and illustrate the concepts in science and mathematics. Level-appropriate resources are as necessary for primary teachers and our young scholars as for teachers and students in higher grades. A model for interaction between engineers and K-4 teachers is proposed. The State of Missouri defines curriculum standards in each subject area and …

A Matlab-Based Upper Division Systems Analysis Course For Engineering Technology, William D. Stanley, Paul L. Kauffmann, Gary R. Crossman

Engineering Technology Faculty Publications

The Department of Engineering Technology at Old Dominion University offers TAC of ABET accredited baccalaureate programs in Civil Engineering Technology, Electrical Engineering Technology, and Mechanical Engineering Technology. All students are required to take traditional courses in algebra and trigonometry, as well as differential and integral calculus, at the freshman and sophomore levels. While these courses provided the necessary basic mathematical skills, it was difficult to justify the traditional upper-division mathematics courses such as differential equations, vector analysis, etc., as appropriate for the special needs of engineering technology students.

To address this issue, the Department has undertaken the development of a …

Performing Interactively A Thermo-Fluids Laboratory Experiment In The Virtual Domain, Sushil K. Chaturvedi, Ali O. Akan, Tarek M. Abdel-Salam, A. Priyadershini

Mechanical & Aerospace Engineering Faculty Publications

This paper deals with the development of an experiment in the virtual domain for the undergraduate thermo-fluids laboratory in the mechanical engineering program. A physical experiment titled "Venturimeter as a Flow Measuring Device" is replicated as a computer-based experiment as part of the ongoing effort at Old Dominion University to develop web-based laboratories that would provide students hands-on experience in the virtual domain. A web-based module is developed that allows experimentation and data taking in a virtual setting much like in the physical experiment. This module incorporating the virtual venturimeter has been used by students to take data for several …

Admissions Criteria And Academic Performance In The Afit Graduate Cost Analysis Program, Kenneth R. Garwood

Theses and Dissertations

This research examined the admissions criteria used by the Air Force Institute of Technology (AFIT) to determine academic eligibility for the in-residence Graduate Cost Analysis (GCA) master's degree program. Using the cumulative graduate grade point average earned at AFIT as the measure of academic performance, comparisons were made between the predictive capability of the current criteria and other potential factors. Factors considered included scores from the Graduate Record Examination (GRE) and the Graduate Management Admissions Test (GMAT), undergraduate cumulative and math grade point averages, applicant's age and gender, ratings of the undergraduate school's admissions competitiveness, undergraduate degree type, and various …

The Predictive Validity Of The Afit Graduate Engineering And Environmental (Geem) Admission Requirements, Charles C. Zitzmann

Theses and Dissertations

Recognizing that a strong commitment to advanced technical and management education (Van Scotter, 1993, p. 1) serves to maintain the capability and strength of the United States Air Force (USAF), the Air Force Institute of Technology (AFIT) Graduate School of Engineering and Management (GSEM) offers a full-time, eighteen-month, Graduate Engineering and Environmental Management (GEEM) program to military officers and Department of Defense (DoD) civilian employees. The AFIT uses the applicant's undergraduate grade-point average (UGPA), Graduate Record Examination (GRE) General Test verbal and quantitative scores, and undergraduate mathematics course grade-point average (UMGPA) to select applicants for admission. This study analyzed how …

Systemic Issues In Asynchronous Delivery Of Graduate Engineering Management Programs, Charles Keating, David Dryer, Andres Sousa-Poza, William Peterson, Robert Safford

Engineering Management & Systems Engineering Faculty Publications

The purpose of this paper is to examine systemic issues that impact the design, delivery, and maintenance of asynchronous engineering management educational products. Asynchronous education continues to rapidly evolve as an alternative to traditional classroom delivery. An asynchronous educational system requires the effective integration of technology, supporting processes, and infrastructure design to prepare, deliver, and maintain asynchronous educational products. Currently, the technological capabilities for delivery of asynchronous education have outstripped the ability to maximize those advanced technologies. To help understand this rift between technology and our ability to deploy that technology this paper examines three critical areas. First, the distinctions …

Engineering Management- The Minor Of Choice, William Peterson, Paul Kauffmann, Charles Keating, Resit Unal

Engineering Management & Systems Engineering Faculty Publications

The minor in engineering management provides several real benefits to undergraduate engineering and engineering technology students, not the least of which can be a substantially larger starting salary. The other benefits it offers students are in the skill sets developed (project management, engineering economics, organization behavior / principles of management, and either statistical concepts or decision techniques), the preparation to start an engineering management graduate degree, and the bridging of the competency gaps identified in several national surveys. This paper addresses the benefits of the minor to engineering management programs.

Web-Based Distance Instructional Partnership For Maritime Technology Of Pacific Rim Countries, Chun-Mei Shieh

Dissertations and Theses @ UNI

The prime purpose of this study was to identify and determine the attitudes and intentions of the faculty members in the field of marine technology education in Taiwan and Australia regarding adopting Web-based distance education. A secondary purpose was to develop guidelines for a program in preparation for implementing Web-based distance education for faculty members in Taiwan.

Five groups in the field of marine technology composed the research population for this study. They are the faculty members in Taiwan in nine vocational high schools, two junior colleges, the National Kaohsiung Institute Marine Technology (NKIMT), and the National Taiwan Ocean University …

An Instrument For Assessing Knowledge Gain In A First Course In Circuit Theory, Vishnu K. Lakdawala, Stephen A. Zahorian, Oscar R. González, Amit Kumar H., James Leathrum

Electrical & Computer Engineering Faculty Publications

Although there has been considerable research on the development and use of assessment instruments to measure the effectiveness of various pedagogical approaches to teaching introductory physics classes (Hestenes et al. 1, Hestenes et al 2, Hake 3, Saul et al. 4) and other science courses (for example, see Vosniadou 5), there is relatively little similar work that has been done to develop assessment instruments for the first circuit theory course that is taught in electrical and computer engineering. Given the large numbers of students nationwide who take such a course, the challenge this course presents to beginning engineering students, and …

Global Engineering In An Interconnected World: An Upper Division General Education Cluster At Old Dominion University, Sushil Chaturvedi, Gary Crossman, William Swart, Joseph Betit

Mechanical & Aerospace Engineering Faculty Publications

The “Global Engineering in an Interconnected World” cluster of courses fosters among students an awareness and understanding of global technology, quality assurance standards, and differences in cultural, communication, and business practices and their impact on a global work environment. This cluster will prepare the growing numbers of students who will accept employment with global firms or find themselves part of a merger or strategic alliance involving multinational corporations. This newly approved cluster of five courses described in the paper has been approved by the University for satisfying University upper-division general education requirements. As a consequence, students choosing this route to …

Prototype Development For A Leak-Preventive Toilet Flush System- An Met Senior Design (Capstone) Project, Cheng Y. Lin

Engineering Technology Faculty Publications

A senior design (Capstone) project for three mechanical engineering technology students at Old Dominion University is described. A prototype design is presented to perform the functional test of a leak-preventive toilet system. There are two major leaks in the toilet water tank. In the first case, leaking occurs when the seal in the water tank becomes aged. The leak is very easy to detect visually, since the outside of the tank and the floor becomes wet. In the second case, leak occurs when the flapper valve can't complete shut off the water, due to corrosion or damage of the rubber …

Effectiveness Of A Multimedia General Education Course, Patricia Backer

Faculty Publications

The current paper describes the design, development, and evaluation of self-paced multimedia modules that are used in an advanced General Education course at San Jose State University. The design and development cycle of these modules began in 1994 and continues to this date. The General Education course, Technology and Civilization (TECH 198), is designed to introduce students to the realm of history and usage of technology in society and to increase their awareness of both the uncertainties as well as the promises of the utilization of technology as a creative human enterprise. During the summer session 1999, the completed modules …

Mechatronics Education At Kettering University: Development Of Learning- Specific Hardware And Software, Jeffrey Hargrove, Theodore J. Stokes

Mechanical Engineering Presentations And Conference Materials

A series of learning-specific electronic circuit boards and associated software has been developed to support mechatronics education in the Mechanical Engineering Department at Kettering University. The boards are designed to interface to the Toshiba TLCS-900H Microprocessor Trainer and Evaluation Board. The purpose of these boards is to provide mechanical engineering students of mechatronics with robust hardware that readily permits interfacing of sensors and actuators to microcontrollers used in mechatronic applications. Further, the boards feature signal conditioning circuits for use in conjunction with sensors, and driver circuits for operating high-current actuating devices. Supporting software has been written to permit ready use …

Selection Of Curricular Topics Using Extensions Of Quality Function Deployment, Paul Kauffmann, Abel Fernandez, Charles Keating, Derya Jacobs, Resit Unal

Engineering Management & Systems Engineering Faculty Publications

Decision science can be an effective tool for enhancing organizational participation during strategic and complex decision making. This involvement develops a group consensus for relating organizational goals and the methods to achieve them. This paper describes an application of Quality Function Deployment (QFD) to define curricular topics that meet program objectives. Based on the ability of QFD to establish relationships, the model identifies the most important topics and quantifies their impact on meeting program goals. The model was developed to support restructuring of a Masters of Engineering Management degree program. The model supported decisions in selecting and prioritizing the required …

The Reasons Why Many African-American And Hispanic Women Do Not Choose Careers In Technology, Kathryn Elizabeth Guzman

Graduate Research Papers

There have been numerous statistics showing that minorities including women, African-Americans, Hispanics, and Native Americans, are least likely to choose careers in the science and technology field. Along with those studies have been possible reasons why they choose not to enter into the field. Reasons have ranged from lack of encouragement to people just telling them flat out that there is no possible way that they can succeed in the field.

This study found that African-American and Hispanic women do not choose careers in technology for many of the same reasons. As young children, some factors are the way teachers …

A Qfd Decision Model For Selecting Service, Teaching, And Research Opportunities, Paul Kauffmann, Abel Fernandez, Charles Keating

Engineering Management & Systems Engineering Faculty Publications

New faculty are confronted with a barrage of information reiterating the importance of performance in the "big three" areas: teaching, service, and research / publications. From the provost to the department head, an untenured faculty member faces strong and sometimes conflicting pressures to become involved in activities ranging from committee assignments to participation in department or university research programs. Often these opportunities come with little guidance, advice, or obvious linkage to long term success in the three pillar areas and ultimately tenure. New faculty are confronted with a complex decision problem for which there is unstructured information available to develop …

An Analysis Of Drafting Competencies In Iowa's High Schools, Rodrick A. Thompson

Graduate Research Papers

Teachers in Iowa high schools are expected to have students achieve the competencies identified by the State of Iowa Department of Education. The competencies for Iowa high school engineering-related classes were published in 1991. They were compiled as a result of Senate File 449. Industry leaders, as well as teachers, throughout the state of Iowa who were actively utilizing drafting skills in 1991 helped create the outcome competencies. Since that time, these competencies have not been reviewed or revised and may need updating. The demands of industry change so frequently it is possible these are no longer the appropriate competencies. …

Values And Reward Preferences Of Prospective Engineers, S Bhargava

IIMB Management Review

A study conducted among students of a leading Indian institute of engineering and technology yielded useful and significant insights into the preferred rewards and motivators, personal values and background, attitudes and job prospects of prospective engineers, considered to be the cream of Indian youth and likely to assume positions of leadership in the fields of engineering and management. The findings of the study could help solve prevalent problems in designing organisational structures and reward systems and in improving the quality of engineering education and prospects for engineers in Indian organisations.

Preparing An Assessment Plan At San Jose State University, Michael Jennings, Thalia Anagnos

Faculty Publications

The College of Engineering at San Jose State University is scheduled for an accreditation visit in Fall 1999 and has decided to seek reaccreditation under the ABET 2000 criteria. An assessment implementation project has been active for the past two years within the College; with primary objectives of refining missions for programs, defining program outcome objectives, determining which components to assess, and developing appropriate metrics and methods. Longer term objectives of this project are to establish a continuous quality improvement philosophy in the College and to provide information for the ABET accreditation review.This paper is an evaluation of the status …

A Value Focused Thinking Approach To Academic Course Scheduling, Shane A. Knighton

Theses and Dissertations

In 1997, the School of Engineering of the United States Air Force Institute of Technology began exploring ways of automating the academic course scheduling process. The administration desired an expedient approach for course scheduling which supports the institute's mission of "providing scientific and technological education" to officers from all branches of military service, as well as international military forces. The scheduling approach needed to be flexible, efficient, and represent the institute's values and principles. Decision Analysis (DA) and specifically, Value Focused Thinking (VFT), is used to decompose the complex problem of academic course scheduling and determine the factors that are …

Mathematics, Modeling, And Modular Curriculum In Engineering Retraining Programs, Massoud Moussavi

Educational Studies Dissertations

The present study is an attempt to probe, explore, and provide an appropriate educational method for engineering retraining programs. The central concerns and implications of this study revolve around: who engineers are, how they learn, why they need to learn, and what they have to learn. The existing retraining programs also will be evaluated in order to develop a suitable retraining program for engineers.

Assessment Methods For Virtual Laboratories In Civil Engineering Technology, Carol L. Considine, Vernon W. Lewis Jr.

Engineering Technology Faculty Publications

Old Dominion University has developed an extensive distance learning system that includes 40 remote sites. A majority of the sites are located at community colleges. There are 30 sites in Virginia, three sites in North Carolina, one site in Washington State and one site in Arizona. In addition, there are four sites at Higher Education Centers in Virginia and one site at a local industrial facility. The Civil Engineering Technology curriculum requires three laboratory courses, which are a challenge in the distance learning environment because of the lack of laboratory equipment and computers at the broadcast sites. The three courses …

A Comparative Study Of The Perceived Educational Needs Of Iowa Merged Area Vii Manufacturers And Iowa Technical Educators, David D. Bradney

Dissertations and Theses @ UNI

This research was a descriptive pilot study that compared the perceptions of Iowa Merged Area VII manufacturers and Iowa technical educators regarding technical curricula, occupational skill certification, and drafting practices as these relate to Associate Degree programs in Mechanical Drafting and Design Technology. The problem was to determine what should be taught in two year technical curricula in Mechanical Drafting and Design Technology. The purpose of the study was to compare the perceived educational needs of Iowa Merged Area VII manufacturers and Iowa technical educators regarding the content of Mechanical Drafting and Design Technology curricula. The populations used for this …

The Role Of The Gso Program In The Space Operations Career Field, Gregory J. Beloyne

Theses and Dissertations

The number of Air Force officers graduating from the Air Force Institute of Technology's Graduate of Space Operations master's degree program is declining. Furthermore, the number of advanced academic degree jobs these officers fill within the Space Operations career field has been reduced. These events question the role the GSO program has in the Space operations career field. This research surveys the GSO populations to determine how useful their master's degrees have been in providing the skills and knowledge needed to fill the advanced degree positions. This research also addresses the number of officers entering the GSO program each year. …

An Assessment Of The Appropriateness To The Royal Australian Air Force Of A Masters Level Professional Program In Information Systems, Ralph G. L. Kettle, Joseph R. Taylor

Theses and Dissertations

This study assessed the appropriateness, to the Royal Australian Air Force RAAF, of a graduate professional program in Information Systems (IS) based on the Association for Computing Machinery’s ACM curriculum model. The ACM curriculum model is an archetype of graduate education in IS. Programs based on this model produce graduates with knowledge, skills, and abilities (KSAs) that are required by IS practitioners. The usefulness of twenty KSAs that underlie the ACM curriculum model were evaluated by 33 incumbents of RAAF information Systems Agencies and Directorate of Communications and Information Systems - Air Force. Although uncertain about the educational background suited …

A Comparison Of Minority And Non-Minority Engineering Students On Selected Personality And Program Variables, Thomas Mercer Collier Jr.

Theses and Dissertations in Urban Services - Urban Education

The purpose of this study was to investigate whether there are common characteristics associated with 226 Hispanic, African American, and White engineering students who persist at predominantly White colleges and universities. A personality profile of minority and non-minority engineering students was developed. Information regarding factors influencing choice of major, university, study, work and extracurricular involvement, possible reasons for withdrawal from college, awareness and satisfaction with student support services and selected academic courses was also compiled. Components of Minority Engineering Programs (MEPs) which are most used or valued by minority engineering students were identified.

Analysis of Variance identified four of the …

Factors Influencing Preparation Needed Of Future Industrial Technology Department Leaders In Higher Education, Rajendra L. Desai

Dissertations and Theses @ UNI

The object of this study was to help future industrial technology department leaders in higher education develop effective planning strategies and prioritize their preparation before they sought leadership positions in industrial technology. Two hundred fifty-four industrial technology department leaders in higher education from all over the United States were asked to respond to a questionnaire. A five point Likert-type scale was used to rate the importance of 58 statements identified from Marshall's (1984) study. One hundred sixty (62.99%) usable responses formed the basis of this study.

Mean values and standard deviations were determined for all the statements. The grand mean …