Engineering Education Commons^™

A New Model Of Project Based Learning, Ron Ulseth, Jefferey E. Froyd, Thomas A. Lotzinger, Dan Ewert, Bart Johnson

Integrated Engineering Department Publications

A new model for engineering education has been developed and funded. The model is 100% project based learning (PBL) where the students develop their own learning objectives. The projects are authentic needs contributed by collaborating industries. Students monitor the acquisition of 32 technical competencies and all of the design and professionalism competencies required of new practicing engineers. The reasons for the new model, description of the model, research supporting the model, methods for evaluating the model and its transportability are discussed.

Entrepreneurship In The Iron Range Engineering (Ire) Model, Dan Ewert, Ron Ulseth, Bart Johnson, Jeff Wandler, Andrew Lillesve

Integrated Engineering Department Publications

The aim of this paper is to describe a new model for engineering education that has entrepreneurship, in its many form, as a focus. Issues involved with integrating student-based entrepreneurship into the educational process are also described.

Connecting Science With Engineering: Using Inquiry And Design In A Teacher Professional Development Course, Louis S. Nadelson, Patricia Pyke, Janet Callahan, Anne Hay, Joshua Pfiester, Mark A. Emmet

Curriculum, Instruction, and Foundational Studies Faculty Publications and Presentations

The engineering design process has evolved over time to be the central and effective framework that engineers use to conduct their work. Logically, K-12 STEM professional development efforts have then attempted to incorporate the design process into their work. There has been little in the STEM literature, though, of the explicit measurement of the growth in design process knowledge. Our study presents findings of significant improvements in knowledge of the design process that resulted over the course of a recent summer STEM institute and professional development program among K-5 teachers.

As more emphasis is placed on integrating STEM into the …

Developing And Assessing Stem Curriculum With The Intent Of Promoting Technological Literacy, Scott Bartholomew, Geoff Wright, Ron Terry

Faculty Publications

Developing and Assessing STEM Curriculum with the Intent of Promoting Technological Literacy Technological literacy is a key component of President Barack Obama’s $260 Million STEM educational initiative (Office of the Press Secretary, 2009). Central to his plan is STEM teacher training and curriculum development. Both of these issues were addressed and are currently being measured by the research outlined in this paper. Spring2010 a collection of technology and engineering education graduate students developed with mentoring from two technology and engineering education professors 20 lesson unit and lesson plans promoting technological literacy. The lesson plans are currently being used and assessed …

Asynchronous Use Of Engineering (Materials) Education Videos, Craig Johnson, Arthur D. Morken

All Faculty Scholarship for the College of the Sciences

Engineering education delivery is dynamic and increasingly asynchronous. An observation that students had very different levels of knowledge and skills as they progressed through our programs, led the authors to use audio/visual media as a leveling intervention. In this effort the authors collected data to determine if audio/visual media can be used to increase performance in the development of a program related task and guide students to higher levels of learning on Blooms Taxonomy through the development of student created learning aids.

One specific need was reflected in the disparate skills of our majority component of ‘transfer’ students in our …

Assessment Of First Year Experiences At Sjsu, Patricia Backer, Emily Allen, Janet Sundrud

Faculty Publications

With nearly 5,000 students, the Charles W. Davidson College of Engineering (CoE) at San José State University (SJSU) is the largest provider of engineers to Silicon Valley companies and is ranked 12th among engineering programs for master’s-level institutions in the 2009 U.S. News &World Report's listing of "America’s Best Colleges. “Our overarching theoretical model for student retention is based on Tinto’s model. We adapted this model, based on additional research, to address the needs of students at SJSU. According to this model, effective and positive interactions in college should increase the student’s commitment and effort in college, and thereby, increase …

Evaluation Of Senior Project Group Processes Against Cmmi Standards, Jonathan Winstead

Honors Capstone Projects and Theses

No abstract provided.

Education On Conceptual Modeling For Simulation- Beyond The Craft: A Summary Of A Recent Expert Panel Discussion, Durk-Jouke Van Der Zee, Andreas Tolk, Mike Pidd, Kathy Kotiadis, Antuela A. Tako

Computational Modeling & Simulation Engineering Faculty Publications

No abstract provided.

Afit Graduate School Of Engineering And Management Catalog 2011–2012, Graduate School Of Engineering And Management, Air Force Institute Of Technology

AFIT Documents

The Graduate Catalog represents the offerings, programs, and requirements in effect at the time of publication.

Improve Or Perish, Revisited -- Again, Johnny J. Moye, Petros J. Katsioloudis

STEMPS Faculty Publications

The article reviews the articles "A Major Problem in Education: Improve or Perish," by M. Ray Karnes and "Improve or Perish-Revisited," by John V. Gallagher.

Simulation And Visualization Enhanced Engineering Education- Development And Implementation Of Virtual Experiments In A Laboratory Course, Sushil K. Chaturvedi, Kaustubh A. Dharwadkar

Mechanical & Aerospace Engineering Faculty Publications

This paper presents results from a National Science Foundation grant titled "Simulation and Visualization Enhanced Engineering Education", funded by the EEC division. Although the scope of the project is quite broad, embracing a wide range of courses in three engineering disciplines, the present work describes the results obtained from application of simulation and visualization for development and implementation of web-based virtual engineering laboratories. The present work leverages the advancement in hardware and software technologies to map physical experiments into web-based virtual experiments that can be used to enrich student's laboratory experience. Four physical experiments in the thermo-fluids laboratory course have …

A Comparison Of Two Engineering Outreach Programs For Adolescents, Louis S. Nadelson, Janet M. Callahan

Materials Science and Engineering Faculty Publications and Presentations

There is continued growth and development of outreach programs designed to increase pre-college students’ awareness and understanding of engineering as a profession and as a career. These outreach programs vary in format and in the groups targeted for participation but maintain the same fundamental goal of increasing participant knowledge of engineering. Many of these outreach programs also maintain the implicit goal of increasing the participants' knowledge and attitudes toward college. The additional resources and funding that are commonly allocated to support outreach programs frequently involve documenting accountability which motivates evaluation of program impact. Therefore, many outreach events include program evaluation …

Impact Of Project Based Learning In Introduction To Engineering/Technology Class, Alok K. Verma

Engineering Technology Faculty Publications

Project based learning (PBL) has a proven record as a teaching tool. Concepts that are often hard to grasp are made easy by the use of project based activities. The constructivism learning theory suggests that people learn better by actively participating in the process of learning. The Introduction to Engineering and Engineering Technology class has been modified to include project based learning kits to engage freshmen early on in the program. The goal is to demonstrate students the link between the scientific principles and their engineering applications. The course is team taught by faculty from various engineering and technology disciplines …

Attracting K-12 Students Towards Engineering Disciplines With Project Based Learning Modules, Alok K. Verma

Engineering Technology Faculty Publications

Low enrollment and high attrition rates in Science, Technology, Engineering and Math (STEM) based degree programs have created a workforce problem in industries like shipbuilding and repair which are important for national security. Part of this problem can be attributed to pedagogical issues like lack of engaging hands-on activities utilized for science and math education in middle and high schools. Lack of student interest in technical careers can also be attributed to lack of an integrated approach in teaching math, science and technical education. To engage student's interest in the technical career path, it is important that students establish a …

Promoting Stem Education Via The Design And Fabrication Of A Simulated Lunar Vehicle, Henrique Casagrande

Von Braun Symposium Student Posters

No abstract provided.

Ahhhhhhh! Earthquake!, Jarred Green, Eugene Lasarge, Brittany Marcott, Maigan Matthias, Matthew Watts

Von Braun Symposium Student Posters

No abstract provided.

The Geometric Growth Of M&S Education: Pushing Forward, Pushing Outward, John A. Sokolowski, Catherine M. Banks

VMASC Publications

M&S education is experiencing a geometric growth that is placing it front and center as a discipline and as an interdisciplinary tool. This article discusses the evolution of the discipline of M&S. It answers: Why has M&S education experienced a forward and outward growth? What is it that makes this discipline unique? What is the current state of M&S education?

Teaching Inquiry-Based Stem In The Elementary Grades Using Manipulatives: A Systemic Solution Report, Louis S. Nadelson, Anne Hay, Pat Pyke, Janet Callahan, Cheryl Schrader

Curriculum, Instruction, and Foundational Studies Faculty Publications and Presentations

Young learners come to school holding myriad conceptions about how the world works, particularly in the areas of science, technology, engineering, and mathematics, or STEM.^1-3 Further, young students' conceptions are commonly based on fragmented knowledge or naïve perspectives that contribute to the importance of early exposure to and practice with scrutinizing situations scientifically.^1,3 An important part of helping children gain the skills necessary to approach situations scientifically involves preparing them to conduct scientific inquiry.³ The development of critical thinking skills and scientific approaches to problem solving should begin early in education.⁴ However, lack of elementary …

Renewable Energy Education At Merrimack College, Jack Adams

Electrical Engineering Faculty Publications

This paper describes recent, ongoing and planned Renewable Energy (RE) education at Merrimack College. The primary RE education efforts have been through the department of Electrical Engineering (EE), with involvement from the department of Civil Engineering. In summer of 2009 the college installed a solar hot water (SHW) system in one of its student townhouses. The subjects of the advanced EE elective “Energy Measurement and Display” in summer 2009 were the selection of sensors to measure energy delivered by this SHW unit, and the uploading via Ethernet of real time data to a central server. The EE department requires all …

Building A Successful Transatlantic Collaboration In Engineering/Technological Education; Lessons From A Six Year Journey, Donal Mchale, Mark Mcgrath, John Lawlor

Conference Papers

This paper reflects on key learning’s from the first six-years (2004-2010) of the development of a collaborative journey of two trans-Atlantic higher-educational institutions. It describes the progress towards building a sustainable and innovative international educational partnership in Engineering/Technological education between the Technological University Dublin,DublinIrelandandPurdue University,Indiana,USA.

In particular, the paper provides insight into the iterative stages of development of this relationship. It reflects on some of the key challenges and it recognises the critical enablers of success. It focuses on challenges and solutions in the following six important areas

(i) The partnership initiation stage. Key considerations and important enablers of future …

Graduate School Of Engineering And Management 2010-2011 Catalog, Graduate School Of Engineering And Management, Air Force Institute Of Technology

AFIT Documents

The Graduate Catalog represents the offerings, programs, and requirements in effect at the time of publication.

An Evaluation Of Risk Management Courses Offered In Engineering Management Programs, S. Jimmy Gandhi, C. Ariel Pinto

Engineering Management & Systems Engineering Faculty Publications

For this paper, the authors have surveyed a total of 22 engineering management (EM) programs in the United States (both accredited and non-accredited). The purpose of this study was to analyze the offering of risk management courses as part of the engineering management curriculum. The findings showed that the majority of the programs did not offer a single dedicated course on risk management and merely covered the topic as part of other courses such as project management. The authors have made recommendations that risk management should be included as a required part of the EM curriculum due to the higher …

Gains In Knowledge And Perception Of Engineering After Participation In An Engineering Design Web-Experience Are Gender-Dependent, Kimberly Edginton Bigelow, Gail Wheatley, David Tomasko

Mechanical and Aerospace Engineering Faculty Publications

Web-based activities have the potential to teach engineering in both formal and informal science education settings, maximizing outreach efforts. To date, many activities available on the internet teach about engineering, but few allow students to truly “do” engineering.

This project utilized web animation and interaction in the design of a web-based experience focused on engineering design. In this activity, targeted toward middle school students, users played the role of engineer and engaged in the process of designing a cell phone for the older adult market. It was hoped that this web-based activity would increase participant understanding of what engineering is …

Research In Technology Education, Philip A. Reed (Editor), James E. Laporte (Editor)

STEMPS Faculty Books

Due to the laboratory-based nature of technology and engineering education programs, professionals in our field have often focused on the resources in our classrooms and laboratories and the instructional methodologies used to address specific concepts. Formal research into content and practice has often given way to “what seems right”. New curriculum is constantly being introduced (based on what is occurring in business and industry), yet the inclusion for those evolving concepts in courses and programs is typically not verified.

Hence, the importance of the 2010 CTTE yearbook and its focus on the dire need for an aggressive research agenda in …

Implementing Tablet Pcs In A Distance Learning Environment, Glenda Scales, Sharon Caraballo, James Groves, Rosalyn Hobson, Linda Vahala, Catherine Amelink

Electrical & Computer Engineering Faculty Publications

(First paragraph) The Commonwealth Graduate Engineering Program (CGEP) is a collaborative distance education program developed by leading Universities in the Commonwealth of Virginia. It is over 25 years old and its main goal is to deliver graduate engineering courses to qualified professionals located across the Commonwealth of Virginia. Traditionally, the courses delivered to students in this program are done through interactive video conferencing (IVC) technology and most students are required to drive to a physical location. However, an increasing number of working professionals are beginning to want more flexibility with the timing and locations of these classes. With these changes …

A Systemic Solution: Elementary Teacher Preparation In Stem Expertise And Engineering Awareness, Louis S. Nadelson, Janet Callahan, Pat Pyke, Anne Hay, Cheryl Schrader

Curriculum, Instruction, and Foundational Studies Faculty Publications and Presentations

Research shows that most K-5 teachers are typically required to complete only minimal coursework in science and mathematics, which constrains their knowledge, efficacy, and confidence for teaching STEM (Science, Technology, Engineering and Math) content. Additionally, elementary teachers, like much of the general public, have limited comprehension about the relationship between STEM concepts and engineering fields and the kind of work and societal contributions made by engineers. Yet, elementary school is a critical time in which students develop foundational understanding of STEM concepts, career options, and inquiry learning.

To address students' STEM needs and limited teacher preparation, the Idaho SySTEMic Solution …

Graduate School Academic Catalog 2009-2010, Graduate School Of Engineering And Management, Air Force Institute Of Technology

AFIT Documents

The Graduate Catalog represents the offerings, programs, and requirements in effect at the time of publication.

Energy From The Skies: Empowering Future Generations, Petros J. Katsioloudis, Stella Bondi, Walter F. Deal

STEMPS Faculty Publications

The article discusses the development of photovoltaic technology. The first account of the use of solar power during war in western civilization was in the second century B.C. during the battle of Syracuse with Archimedes' famed Death Ray. In the late 1800s and early 1900s many advances occurred including the invention of solar-powered engines, the discovery of the photoconductivity of selenium and its ability to produce electricity when exposed to light, and the construction of the first solar cells from selenium wafers. Photovoltaic technology was born in the U.S. in 1954 when Daryl Chapin, Calvin Fuller, and Gerald Pearson developed …

A Comparison Of Instructional Delivery Methods Based On Student Evaluation Data, John Hackworth, Carol Considine, Vernon Lewis

Engineering Technology Faculty Publications

Distance Education is an increasingly common educational delivery method. At Old Dominion University, all junior and senior level engineering technology courses are offered via distance education at least once every two years. A majority of courses in the distance education system at this university have three simultaneous delivery methods: on-campus, televised (receiving the course at an off-campus site via satellite video/audio), and internet-based video-streamed.

This paper explores the results of student course evaluation surveys for trends, in particular those trends which can be a result of the mode of delivery. Results of these surveys for 23 courses over a 4-year …

Product Focused Freeform Fabrication Education, Frank W. Liou, Ming-Chuan Leu

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Presented in this paper is our experience of teaching freeform fabrication to students at the Missouri University of Science and Technology, and to high school students and teachers. The emphasis of the curriculum is exposing students to rapid product development technologies with the goal of creating awareness to emerging career opportunities in CAD/CAM. Starting from solid modeling, principles of freeform fabrication, to applications of rapid prototyping and manufacturing in industry sponsored product development projects, students can learn in-depth freeform fabrication technologies. Interactive course content with hands-on experience for product development is the key towards the success of the program.