Engineering Education Commons^™

Review Of Educational Technology: Closing The Gap Between Modern Technology And The College Engineering Classroom, David Pinkerton, Krishna Pakala

Mechanical and Biomedical Engineering Faculty Publications and Presentations

This paper aggregates information from past and current studies regarding the implementation of technology in engineering classrooms and identifies the most promising ideas, technologies, and techniques. This paper provides insight into best practices for implementing technologies to improve the education of engineering students. This paper provides recommendations to adopt non-traditional teaching methods. Educational tools and techniques are evaluated on the basis of: Adoption and Assimilation, Access, Community, Intellectual Presence, Student Perception, and Development of Social and Professional Skills. Best practices are highlighted with descriptions of the technologies and techniques that were found most promising.

Easy Exam, Sarthak Dabhi

Electronic Theses, Projects, and Dissertations

Easy Exam is web-based educational software which allows professors to take and students to give exams. This project focuses on making an effortless process for professors to make an exam, to grade exams for all students, and to create class statistical analysis reports about all exam-taking students. At the end of the exam, students can see their report with analytics based on topics in the exam. This web-based software will help students to identify their weaknesses and strengths. So, students can focus on their weaknesses and improve their knowledge. Furthermore, this software will help the professors to identify which students …

5th/6th Graders And Preservice Teachers Explore Engineering And Coding In A Combined After-School Technology Club/Educational Technology Course, Jennifer Kidd, Sam Sacks, Krishnanand Kaipa, Kelly Rippard

Teaching & Learning Faculty Publications

Elementary schools are increasingly encouraged to adopt STEM education efforts that include engineering and programming, yet pre-service teachers (PSTs) are not traditionally prepared to teach these subjects. This pilot study describes an innovative preparation experience designed to help PSTs gain experience and confidence in these areas. As part of an undergraduate educational technology course, PSTs led an after-school technology club at a local public school. PSTs enrolled in the course worked alongside fifth and sixth grade students on a series of collaborative design challenges that culminated in the creation of animal-inspired robots. The “WoW Club”, as it came to be …

Disciplinary Learning From An Authentic Engineering Context, Catherine Langman, Judith Zawojewski, Patricia Mcnicholas, Ali Cinar, Eric Brey, Mustafa Bilgic, Hamidreza Mehdizadeh

Journal of Pre-College Engineering Education Research (J-PEER)

This small-scale design study describes disciplinary learning in mathematical modeling and science from an authentic engineeringthemed module. Current research in tissue engineering served as source material for the module, including science content for readings and a mathematical modeling activity in which students work in small teams to design a model in response to a problem from a client. The design of the module was guided by well-established principles of model-eliciting activities (a special class of problem-solving activities deeply studied in mathematics education) and recently published implementation design principles, which emphasize the portability of model-eliciting activities to many classroom settings.

Two …

Ignatian Pedagogy For Sustainability To Support Community-Based Projects: Client-Focused Sustainable Energy Solutions, Andrew Baruth

Jesuit Higher Education: A Journal

Seeing the words of Laudato Si’ as a call to action, we are engaging students in Ignatian Pedagogy for Sustainability through a series of community-based projects with the goal of client-focused sustainable energy solutions and associated dialogue. We outline the development of a purpose-created Energy Technology undergraduate program housed in the College of Arts and Sciences at Creighton University, born from Ignatian Sensibilities, and highlight the role of client engagement to engross students in a client-focused design process to deliver sustainable energy initiatives that become practically feasible with student leadership. For the senior capstone of this program, students engage in …

Exploring Engineering Club, Samantha Corey, Stephen Yaghmour

Honors Program: Expanded Learning Clubs

Exploring Engineering Club provides an introduction to a variety of engineering problems and piques the students’ interest in engineering by accompanying the information with hands-on problem solving activities mainly related to structural engineering. The activities will often be done in teams which will teach good teamwork skills, as well as problem solving and critical thinking.

Graduate School Of Engineering And Management Catalog 2019-2020, Graduate School Of Engineering And Management, Air Force Institute Of Technology

AFIT Documents

The Graduate Catalog represents the offerings, programs, and requirements in effect at the time of publication.

Report From The Stem 2026 Workshop On Assessment, Evaluation, And Accreditation, Rebecca Bates, Angela Arnold, Cary Komoto, Peggy Brickman, R. Alan Cheville, Elizabeth Longley, Jose Mestre, Mihaela Sabin, James Warnock

Integrated Engineering Department Publications

A gathering of science, technology, engineering, and math (STEM) higher education stakeholders met in November 2018 to consider the relationship between innovation in education and assessment. When we talk about assessment in higher education, it is inextricably linked to both evaluation and accreditation, so all three were considered. The first question we asked was can we build a nation of learners? This starts with considering the student, first and foremost. As educators, this is a foundation of our exploration and makes our values transparent. As educators, how do we know we are having an impact? As members and implementers of …

Exporting Online Engineering Management Programs: Enablers, Barriers, And Descriptions Of Programs At Two Universities, Luna Magpili, Alice F. Squires, Kim Bullington, Linda Vahala, Aysen K. Taylor

Engineering Management & Systems Engineering Faculty Publications

This paper investigates enablers and barriers for Engineering Management Degree Granting Programs offered online by universities located in the United States to students located in foreign countries. Using a strong foundation of literature research and two universities on opposite sides of the country (one east coast, one west coast) exporting online Engineering Management programs as examples, the paper investigates seven enablers and seven barriers. The enablers and barriers are reviewed in the context of delivering engineering management education online across national borders, without requiring students to travel to another country (referred to as Mode 1 service export). The investigation reveals …

Report From The Stem 2026 Workshop On Assessment, Evaluation, And Accreditation, Rebecca Bates, Angela Arnold, Cary Komoto, Peggy Brickman, R. Alan Cheville, Elizabeth Longley, Jose Mestre, Mihaela Sabin, James Warnock

Reports

A gathering of science, technology, engineering, and math (STEM) higher education stakeholders met in November 2018 to consider the relationship between innovation in education and assessment. When we talk about assessment in higher education, it is inextricably linked to both evaluation and accreditation, so all three were considered. The first question we asked was can we build a nation of learners? This starts with considering the student, first and foremost. As educators, this is a foundation of our exploration and makes our values transparent. As educators, how do we know we are having an impact? As members and implementers of …

Scaffolding Project-Based Learning In An Engineering And Education Partnership Using Open-Access Technology, Pilar Pazos, Stacie I. Ringleb, Jennifer Kidd, Rachel Jones

Engineering Management & Systems Engineering Faculty Publications

This paper describes the use of a freely-accessible open-source platform based on Google Apps for Education that combines Google Sites, Google Docs, Google Drive, Google Hangouts and script language in a custom-based interface that supports collaborative service-learning projects for teams of Engineering and Education students. The approach discussed in this paper was successful in promoting collaboration among students from two different disciplines working remotely. The analysis suggests that balanced participation in the team, presence of shared goals and clear roles that emphasized individual and collective responsibilities were key to a successful interdisciplinary project experience. While many students still reported struggling …

An Interdisciplinary Research-Based Education Program For Engaging Plant/Agriculture Sciences, Chemical Sciences, And Engineering Students (Irep-4-Pace) At Minority Institutions, Sharanabasaweshwara Asundi, Gregory C. Bernard, Willard E. Collier

Mechanical & Aerospace Engineering Faculty Publications

An interdisciplinary Research-based Education Program for Engaging Plant/Agriculture sciences, Chemical sciences and Engineering students (iREP-4-PACE) is envisioned with the underlying intent to improve Tuskegee University's (TU’s) STEM retention through the introduction of interdisciplinary, guided, inquiry experiments focused on the production of high-value chemicals from plants. At large, chemicals are synthesized from petroleum resources and it is well established that the continued extraction of these resources is detrimental to the environment. On the contrary, synthesizing chemicals from "plant factories" may be a boon to the environment and have a negative carbon …

Teaching Technical Communication To Engineering Students: Design, Implementation, And Assessment For Project-Based Instruction, Yang Gao

Proceedings of the Interdisciplinary STEM Teaching & Learning Conference (Archived)

Through the project-based instruction (PBI) method, this paper described the design, implementation, and assessment of a technical communication course for engineering graduate students. The paper first addressed an increasing demand of engineering students with great communication skills through analyzing the existing literature and industry criteria. It then introduced concepts and characteristics of PBI and explained why PBI is a fit pedagogy in teaching technical writing to engineering students. Next, it elaborated components involved in the holistic design of the PBI course, including student sample, timeline, designed sections and units, and designing rationale and principles. This paper then reported the teaching …

Global Aviation System: Towards Sustainable Development, Marina P. Bonser Dr.

International Journal of Aviation, Aeronautics, and Aerospace

Aviation around the world has integrated into a global system. As the integration process continues, more aspects and levels of it need to be lead towards the sustainable development of the whole system via advancing strategic management, global communication proficiency, and technological expertise. It becomes essential to enrich global language (English) proficiency with cross-cultural communication competence not only for communication in the air but also for airport security, passenger and cargo services, aircraft and equipage engineering, building, and maintenance. Nowadays lower levels of management need more advanced strategic thinking and problem solving skills, and higher levels of management need global …

Doctoral Engineering Grant Writing Experience To Prepare Future Professionals And Faculty, Katherine Smith, Nathapon Siangchokyoo, Erika Gamarra, Ashish Tamhane, Anthony W. Dean

Engineering Technology Faculty Publications

While there have been many efforts to broaden opportunities for all STEM students by engaging in interdisciplinary endeavors and education focusing on professional development, there are particular problems facing students pursuing doctoral degrees in engineering disciplines. Doctoral programs of the future need to become better equipped to prepare students for future careers as engineering professionals or faculty. It has been noted recently that many doctoral degree recipients are turning to jobs outside of academia but increases in undergraduate enrollment and the average age of the professoriate indicate an increase in demand for new faculty. Both future faculty and professionals can …

Analysis Of Blended And Multi-Modal Instruction And Its Effects On Spatial Visualization Ability, Diana Bairaktarova, Daron Williams, Petros Katsioloudis

STEMPS Faculty Publications

For the last decade, remedial spatial visualization training has been offered to first-year engineering students in traditional classroom settings where students attend class and interact face-to-face with an instructor and peers. An alternative to the traditional pedagogical approach is a multi-modal blended learning format that combines in-class instruction with videos that can be viewed at the student’s convenience. The new setting affords students the opportunity to repeatedly revisit the basic instruction at the time and place of their choosing. This case study investigated student outcomes in a blended multi-modal Introduction to Spatial Visualization course that integrated video lectures; free-hand sketching …

Exposing Students To Stem Careers Through Hands-On Activities With Drones And Robots, Vukica M. Jovanović, George Mcleod, Thomas E. Alberts, Cynthia Tomovic, Otilia Popescu, Tysha Batts, Ms. Mary Louise Sandy

Engineering Technology Faculty Publications

Autonomous robots have been used in a variety of ways from collecting specimen in hazardous environments to space exploration. These robots can be found in various manufacturing systems as Autonomous Guided Vehicles (AGVs) to transport parts and assemblies throughout the manufacturing system. They have also been used as a vehicle to convey design thinking and other STEM-related concepts in mechanical engineering/mechanical engineering technology, electrical engineering/electrical engineering technology, computer science, and computer engineering. Various outreach events have included robotics based activities that engage students in building and programming autonomous robots for the purpose of achieving a specific task. These events are …

Recognizing Engineering Students’ Funds Of Knowledge: Creating And Validating Survey Measures, Dina Verdín, Jessica M. Smith, Juan Lucena

School of Engineering Education Graduate Student Series

This research base paper examines students who are the first in their families to attend college. Our research seeks to understand the role students’ funds of knowledge makes in first-generation college students’ undergraduate experience. Funds of knowledge are the set of formal/informal knowledge and skills that students learn through family, friends, and communities outside of academic institutions. This paper reports funds of knowledge themes relevant to first-generation college students in engineering and the process of gathering validity evidence to support the funds of knowledge themes.

Using ethnographic and interview data, six themes emerged: connecting experiences, community networks, tinkering knowledge, perspective …

Board 51: An Initial Step Towards Measuring First-Generation College Students’ Personal Agency: A Scale Validation, Dina Verdín, Allison Godwin

School of Engineering Education Graduate Student Series

This research paper describes the development of a scale to measure how first-generation college students use engineering as a tool for making a difference in their community and world or personal agency. Personal agency is a capability that every individual holds; it is described by Bandura as an individual’s beliefs about their capabilities to exercise control over events that affect their lives through purposeful and reflective actions. Agentic actions allow students to explore, maneuver and impact their environment for the achievement of a goal or set of goals. This study identifies how cognitive processes of forethought, intention, reactivity, and reflection …

Eager: Broadening Participation Of First-Generation College Student, Jessica M. Smith, Dina Verdín, Juan C. Lucena

School of Engineering Education Graduate Student Series

No abstract provided.

The Legacy Project: Rodney L. Custer, Dte, Rodney L. Custer Dte, Johnny J. Moye Dte

STEMPS Faculty Publications

An interview with vice president of Dept. of Technical Education, Rodney Custer is presented. Topics discussed include interest in technology and engineering education; academic qualification; and experience as university department chair administrator and working with the Center for Math, Science, and Technology (CeMast).

Motivation In Transition: Development And Roles Of Expectancy, Task Values, And Costs In Early College Engineering, Kristy A. Robinson, You-Kyung Lee, Emily A. Bovee, Tony Perez, S. Patrick Wilson, Daina Briedis, Lisa Linnenbrink-Garcia

STEMPS Faculty Publications

This longitudinal study investigated development in expectancy for success (perceived competence), 3 types of task value (utility, interest, attainment), and 3 types of perceived cost (opportunity, effort, psychological) for engineering students during their first 2 years of college. Latent growth curve models indicated declines in expectancy and values, with attainment value declining more slowly than expectancy, interest value, and utility value. Costs increased over time, with effort cost increasing more rapidly than psychological cost. Demographic differences were observed in initial levels of motivation, but not in rates of change over time. Students with slower declines in expectancy and value and …

Board 78: Establishing A Pathway To Completion For Pursuing Engineering And Engineering Technology Degrees Through A Scholarship Program At Old Dominion University, Vukica M. Jovanovic, Anthony W. Dean, Kim Bullington Sibson, Cynthia Tomovic, Rafael Landaeta

Engineering Technology Faculty Publications

There are various barriers facing adult students and veterans completing engineering degrees. Many of these student’s work part- or full-time while in college. In order to help these students, enable high retention rates, and decrease time to graduation require an in-depth understanding of specific student populations, especially ones classified as underrepresented. This paper provides an initial look into the first year of a scholarship program, funded by the National Science Foundation, and student success activities designed to support high-achieving, low-income students with demonstrated financial need pursuing bachelor's degrees in engineering and engineering technology. Support services and scholarships are for veterans …

Continued Efforts In Ti Arm M4 Microcontroller Curricula Developments And Assessments Between Three Different Institutions And Programs, Steve C. Hsiung, Lijian Xu, Feng Jao, Yonghui Wang, Suxia Cui

Engineering Technology Faculty Publications

This project is a continuation in efforts to upgrade the curricula in microcontroller related courses that are facing difficulties in the disappearing and lack technical supports in hardware and software of 68XXX and 80XXX microcontrollers. Through the study of a NSF supported project "Transform the Innovated Design and Development of an Embedded Design Training System and Associated Support Curricula into a Commercial Available Product" that interviewed 130 faculty/teachers/students across the U.S. has revealed on finding newly available microcontrollers is an urgent issue in the academic communities. Based on the supports on hardware and software and function libraries, the TI ARM …

Design A Portable Sensing Platform With A Lidar And Ti Arm M4 Controller, Bin Hu, Steve C. Hsiung, Matthew B. Kersey

Engineering Technology Faculty Publications

The Microcontrollers/microelectronics have been used in variety of engineering applications on complex and efficient operations. One of the challenges in applying existing microelectronic technologies to these engineering systems lies in the need of modular portability, scalability, customizability, and compatibility. This paper focuses on addressing such challenges by designing a portable sensing platform that integrates a Lidar with USB interface and TI ARM M4 microcontroller. This developed sensing system will serve as an effective teaching platform to create new or enhance existing microelectronic courses that allow students to gain hands-on experiences in mobile embedded system designs. Moreover, the customizability and portability …

Improving Stem Recruitment Through A Theme-Based Summer Residential Camp Focused On Sea Level Rise, Vukica M. Jovanović, Balša Terzić, Mujde Erten-Unal, Victoria Hill, George Mcleod, Michelle Covi, David Burdige, Jenifer Alonzo, Justin Mason, Tysha Batts, Cynthia Tomovic

Engineering Technology Faculty Publications

In this paper, the authors present an enrichment program that focuses on Science, Technology, Engineering, and Math (STEM) concepts. The program is named Building Leaders to Advance Science and Technology (BLAST) and is held each summer at three universities across the Commonwealth of Virginia: Old Dominion University, the University of Virginia, and the Virginia Polytechnic Institute. BLAST is sponsored in partnership among these three universities and the Virginia Space Grant Consortium (VSGC), and is funded by the General Assembly of Commonwealth of Virginia. Its main purpose is to expose high school students to topics related to different STEM fields through …

Aligning Best Practices In Student Success And Career Preparedness: An Exploratory Study To Establish Pathways To Stem Careers For Undergraduate Minority Students, Kimberly D. Kendricks, Anthony A. Arment, K. V. Nedunuri, Cadance A. Lowell

Journal of Research in Technical Careers

Undergraduate minority retention and graduation rates in STEM disciplines is a nationally recognized challenge for workforce growth and diversification. The Benjamin Banneker Scholars Program (BBSP) was a five-year undergraduate study developed to increase minority student retention and graduation rates at an HBCU. The program structure utilized a family model as a vehicle to orient students to the demands of college. Program activities integrated best K-12 practices and workforce skillsets to increase academic preparedness and career readiness. Findings revealed that a familial atmosphere improved academic performance, increased undergraduate research, and generated positive perceptions of faculty mentoring. Retention rates among BBSP participants …

Sustainability In Higher Education: Perceptions Of Social Responsibility Among University Students, Younghan Jung, Kayoung Park, Junyong Ahn

Engineering Technology Faculty Publications

Many construction-related training and education programs in the United States have now embraced the concept of sustainability, offering sustainable construction courses that highlight sustainable design and construction practices. These courses have mainly focused on green building strategies for the design and construction of built environments and indoor environmental quality necessary for students’ knowledge enhancement and career development. This study examined the effect of sustainability course on students’ knowledge as well as their perceptions of social responsibility and sustainable behaviors. Data were collected by conducting a survey from construction related programs in U.S. universities. Students were categorized based on their experience …

Strategies In Developing An Aviation & Aerospace Skill Ecosystem For The State Of Telangana, India – Case Study Of Task -Telangana Academy For Skill And Knowledge, Kim Chua, Sujiv Nair, M.P Ganesh Dr.

International Journal of Aviation, Aeronautics, and Aerospace

The aviation & aerospace sector in India has been expanding and growing through partnerships and new research facilities, thereby encouraging more players to invest and optimize the manufacturing process. Improving green and fuel-efficient technologies have contributed to a steady rise in fuelling the demand for aerospace engineers.

The state of Telangana is fast emerging as a new aviation cluster with some of the country’s best-qualified engineers and technicians. The potential of the aerospace industry is immense as it continuously requires skilled technicians and engineers. Considering the precision of skill required, it is imperative that rigorous training be imparted to all …

Big Five Technologies In Aeronautical Engineering Education: Scoping Review, Ruth Martinez-Lopez

International Journal of Aviation, Aeronautics, and Aerospace

The constant demands that technology creates in aerospace engineering also influence education. The identification of the technologies with practical application in aerospace engineering is of current interest to decision makers in both universities and industry. A social network approach enhances this scoping review of the research literature to identify the main topics using the Big Five technologies in aerospace engineering education. The conceptual structure of the dataset (n=447) was analyzed from different approaches: at macro-level, a comparative of the digital technology identified by cluster analysis with the number of co-words established in 3 and 8 and, a keyword central structure …