Engineering Education Commons^™

Teaching Learning Newsletter Vol 1 Issue 2, Sastra Deemed To Be University

TLC Newsletter

No abstract provided.

A Phenomenographic Study Of Academics Teaching In Engineering Programmes In Ireland: Conceptions Of Professional Skills And Approaches To Teaching Professional Skills, Una Beagon

Doctoral

Engineers play a central role in addressing the challenges which face society. However, the influence of globalisation, disruptive technological change and socially complex problems will greatly affect the way engineers work in the future.

As a result, there have been calls to embrace transformational change in engineering education, yet the literature reveals that many reform efforts have fallen short. Industry and society will therefore continue to look to Higher Education Institutions (HEIs) to better prepare engineering graduates with the new skills needed to face the challenges of the future. Notwithstanding the critical and valued role that technical engineering subjects have …

Scaffolding Middle And High School Students’ Engineering Design Experiences: Quality Problem-Scopeing Promoting Successful Solutions, Andrew Hughes, Cameron Denson

Educational Leadership & Technology Faculty Publications

Highly proficient expert engineers begin the iterative process of design by thoroughly investigating the design problem. Engineering students are often distracted by surface details, leading to a faulty conception of the problem and inappropriate solution strategies. Adequate problem-scoping is arguably the most important step in the design process. To address this issue, the researchers developed an instructional framework to help teachers scaffold students’ cognitive and metacognitive processes during the problem-scoping phase of a design challenge. The purpose of this quasi-experimental study was to investigate the impact that scaffolded instruction related to the SCOPE process had on students’ solution success during …

Designing An Integrated Stem Semester For Pre-Service Elementary Teachers, Amanda Thomas, Matt Flores, Michael Hart, Elizabeth Hasseler, Tammera Mittelstet, Danae Peterson, Amy Sokoll Bauer

Department of Teaching, Learning, and Teacher Education: Faculty Publications

Teacher educators in an undergraduate elementary teacher certification program at a large university in the United States redesigned the traditional program to integrate STEM learning across multiple courses. During this Integrated STEM Semester, typically taken during the fifth semester of the undergraduate program, pre-service teachers (PSTs) enroll in mathematics content, mathematics methods, science methods, instructional technology, and practicum courses.

Introduction To Special Theme Issue: Pandemic Pivots, Part 1, Brent K. Jesiek

Journal of International Engineering Education

The COVID-19 pandemic has impacted higher education in manifold and complex ways, not least in the area of international education. Programs built around the physical mobility of students, faculty, and staff were profoundly disrupted beginning in early 2020, necessitating the repatriation of students abroad, cancellation of future travel plans, and rapid development of new options and modalities for global learning. Recognizing this changing landscape, in late 2020 we issued a call for a special issue of JIEE focused on “contemporary trends in international engineering education, including in response to the COVID pandemic, rapid changes in political and economic dynamics, and …

Integrating The Humanities With Engineering Through A Global Case Study Course, Kirsten A. Davis, Siddhant S. Joshi, Lori Czerwionka, Francisco Montalvo, Gabriel O. Rios-Rojas, Joe Tort, Jennifer Marston William, E. Nauman

Journal of International Engineering Education

As the world becomes more connected and globalized, the problems that engineers are called upon to solve are increasingly complex and interdependent. Unfortunately, engineering coursework has traditionally focused on abstract and closed-ended problem solving, offering few opportunities for students to develop these skills. In this practice paper, we argue for the importance of integrating the humanities and engineering to understand the multiple and intersecting layers of context in an engineering project. We then describe the Humanities-Informed Engineering Projects course, which we developed to help students acquire this perspective. The course was piloted in Spring 2021 in response to the obstacles …

Enhancing Preservice Teachers' Intention To Integrate Engineering Through A Multi-Disciplinary Partnership (Evaluation), Francisco Cima, Pilar Pazos, Jennifer Jill Kidd, Kristie S. Gutierrez, Stacie I. Ringleb, Orlando M. Ayala, Krishnanand Kaipa

Engineering Management & Systems Engineering Faculty Publications

Driven by the need to broaden participation and increase recruitment in STEM fields, considerable efforts are underway to promote the infusion of engineering into elementary and secondary grade levels. The benefits of engineering education and the strong support from professional and educational groups are well documented, yet the actual integration of engineering content in the K-12 setting remains a challenge. Pre-college educator programs that train future teachers are a natural target for the integration efforts. Although elementary educators recognize the importance of integrating engineering in their classrooms, they often lack the confidence to teach engineering content. The absence of effective …

Preface And Acknowledgments, William S. Walker Iii, Lynn A. Bryan, Siddika Selcen Guzey, Elizabeth Suazo-Flores

Indiana STEM Education Conference

No abstract provided.

Contents, William S. Walker Iii, Lynn A. Bryan, Siddika Selcen Guzey, Elizabeth Suazo-Flores

Indiana STEM Education Conference

No abstract provided.

How Does An Integrated Stem Life Sciences Unit Affect Middle School Students' Engagement And Science Content Knowledge?, Zeynep Gonca Akdemir, Muhsin Menekse, Saira Anwar, Siddika Selcen Guzey

Indiana STEM Education Conference

This study explored the effect of an integrated engineering design-based life sciences unit on middle school students' engagement and science content knowledge, and the role of engagement in predicting their success. Participants were 530 seventh-grade students from rural schools in the Midwest region of the United States. Data included science content pre- and post-assessments and a multidimensional engagement survey. The data were analyzed by conducting paired-sample t-tests and multiple regression analysis. Results indicated that students' social engagement increased when they engaged in an integrated engineering design-based life science curriculum unit. Also, students’ pre-assessment scores were found to be the …

Goals And Proceedings Information, William S. Walker Iii, Lynn A. Bryan, Siddika Selcen Guzey, Elizabeth Suazo-Flores

Indiana STEM Education Conference

No abstract provided.

Pedagogical Methods And Advances For Synchronous/Asynchronous Instruction Of Laboratories In Engineering Technology Programs, Nestor Escobales, Alok Verma

Engineering Technology Faculty Publications

Significant research has been done on the subject of distance learning (DL) instruction for many academic disciplines. However, when it comes to engineering technology (ET) programs, particularly, engineering laboratory work, limited studies are available. It is unquestionable that engineering laboratory work is essential for the successful preparation of individuals enrolled in ET programs. The focus of ET programs is on the correct use and application of engineering principles with a direct focus on practical application rather than on theory alone. The difficulties increase significantly when laboratories are offered in DL mode, particularly for ET programs. It is well known that …

Engineering Technology Programs Outreach To K-12, Alok Verma

Engineering Technology Faculty Publications

The Engineering Technology (ET) degree emphasizes hands-on application and implementation. Graduates holding this degree play a valuable role in economically growing the US and keeping it internationally competitive. However, “engineering and engineering technology, are widely misunderstood… the public sector (employers, students, high-school counselors, politicians and the general public) needs to be educated as to the particular value of each,” according to Engineering.com [1]. The National Academy of Engineering states, “Unlike the much better-known field of engineering, engineering technology is unfamiliar to most Americans and goes unmentioned in most policy discussions about the US technical workforce. This is even though workers …

Mentoring Prospective Engineering Students Through The After School Program "Girls In Engineering" Focused On Building An Underwater Remotely Operated Vehicle, Vukica M. Jovanović, Deborah Marshall, Jeff Warren Larson Jr., Abdul Rahman Badawi, Neil R. Stclair, Otilia Popescu, Murat Kuzlu, Petros J. Katsioloudis, Linda Vahala, Michael Anthony Crespo

Engineering Technology Faculty Publications

A number of studies by engineering education researchers have pointed out that all-female teams, rather than mixed teams, result in better forms of participation and interaction in engineering related after-school programs and clubs. In particular, for after-school programs or clubs that form in response to a STEM competition, all-female teams have better chances of developing. One such competition, which will be discussed in this paper, is a regional Marine Advanced Technology Education (MATE) competition in which students from Blind_Review High School have been participating for many years.For each year’s competition, an all-female team of students enrolled in the Career and …

Facilitating Veteran And Adult Students' Learning And Retention In Engineering: Faculty-Student Partnership - A Model Of An Evidence-Based Practice, Kim E. Bullington, Anthony Dean, Cynthia Tomovic, Vukica M. Jovanović, Rafael E. Landaeta

Engineering Technology Faculty Publications

With the growing number of adult and military veterans entering higher education, it is important to understand and incorporate the basics of andragogy in curriculum, course development, and the learning environment to facilitate learning and degree completion. Researchers in this S-STEM project funded by the NSF share observations of a student-faculty partnership that resulted from the development of a formal learning community. A series of targeted seminars were conducted that appear to have increased adult and military veteran engineering and technology students’ levels of connectedness and self-efficacy. Results of this pilot study are shared as an evidence-based practice to enhance …

Technology Criticism And Data Literacy: The Case For An Augmented Understanding Of Media Literacy, Thomas Knaus

Journal of Media Literacy Education

Reviewing the history of media literacy education might help us to identify how creating media as an approach can contribute to fostering knowledge, understanding technical issues, and to establishing a critical attitude towards technology and data. In a society where digital devices and services are omnipresent and decisions are increasingly based on data, critical analysis must penetrate beyond the “outer shell” of machines – their interfaces – through the technology itself, and the data, and algorithms, which make these devices and services function. Because technology and data constitute the basis of all communication and collaboration, media literate individuals …

Comparison Of Pre-Intervention Idi Results From Stem And Non-Stem Undergraduate Students, Anne M. Lucietto, Liza Russell

Journal of Global Education and Research

The emphasis on intercultural competence is more prevalent in STEM (Science, Technology, Engineering and Mathematics) majors as the world shifts towards a more globalized economy. When entering higher education, students have differing levels of cultural interaction due to varying peer interaction, family experiences, international travel, and social media experiences. The Intercultural Development Inventory (IDI) has been used to develop an understanding of how students view others and the level of skills they have to interact and adapt to other cultures. Using published data focused on pre-intervention assessment, researchers compared it to data obtained from STEM students preparing for an international …

Nature Of Problem-Solving Skills For 21st Century Stem Learners: What Teachers Need To Know, Paul Nnanyereugo Iwuanyanwu

Journal of STEM Teacher Education

Since the emergence of the fourth industrial revolution which calls for a new model of learning for the twenty-first century learners, it has been argued that the nature of problems that learners must solve in science, technology, engineering and mathematics (STEM) must also be transformed to enable new forms of learning skills that are needed to tackle complex global challenges. However, the question of how best to teach these skills purposefully and explicitly is largely overlooked. STEM education reformers recognize that the lecture method or traditional method of teaching is highly ineffective for teaching twenty-first century competencies and skills that …

Standards For Technological And Engineering Literacy: Addressing Trends And Issues Facing Technology And Engineering Education, Johnny J. Moye, Philip A. Reed

STEMPS Faculty Publications

The article offers information on addressing trends and issues facing technology and engineering education. It mentions future challenges, students need to "have a broad conceptual understanding of technology and its place in society, enabling them to be active participants in the technological world and careful creators and users of technology.

Investigating Factors Predicting Effective Learning In A Cs Professional Development Program For K–12 Teachers, Patrick Morrow

School of Computing: Dissertations, Theses, and Student Research

The demand for K-12 Computer Science (CS) education is growing and there is not an adequate number of educators to match the demand. Comprehensive research was carried out to investigate and understand the influence of a summer two-week professional development (PD) program on teachers’ CS content and pedagogical knowledge, their confidence in such knowledge, their interest in and perceived value of CS, and the factors influencing such impacts. Two courses designed to train K-12 teachers to teach CS, focusing on both concepts and pedagogy skills were taught over two separate summers to two separate cohorts of teachers. Statistical and SWOT …

التعليم الهندسي ومتطلبات سوق العمل برامج هندسة القوى الكهربائية كحالة دراسة, Salah Abdlsattar, Fathi Allayth, Kamel Shoush

Al Jinan الجنان

The University has an important role in society in three main axes; education, scientific research and community services where the progress of nations is measured with its strength, the degree of preparation, and kept abreast of the requirements of the times. Because of the fact that the university is made up - at the end - of study plans and programs and also in order to overcome to compete with graduates locally, regionally and internationally, the most important functions of the university asa whole and departments in particular are the preparation of strong plans and study programs for all disciplines …

Method Of Joints: Theory And Practice Of Designing, Building, And Testing Trusses, Andrew J. Hughes, Chris Merrill

Educational Leadership & Technology Faculty Publications

The authors of this article, like many of us, are proponents of engineering education but are also proponents of shop skills, craftsmanship, technological literacy, and the tacit knowledge and skills developed through applying sound theories during practical hands-on learning. The authors believe that engineering is an important aspect of our discipline, but so are the application of thinking, tool skills, measurement, geometric construction, manufacturing, instrumentation, testing and analysis, mathematical and scientific theories, and many other hands-on, minds-on skillsets that all need to maintain association with our discipline. As the authors are proponents for engineering education that is done well, they …

Using Schema Training To Facilitate Students' Understanding Of Challenging Engineering Concepts In Heat Transfer And Thermodynamics, Dazhi Yang, Ruth Streveler, Ronald L. Miller, Inanc Senocak, Jim Slotta

Educational Technology Faculty Publications and Presentations

Background: Chi and colleagues have argued that some of the most challenging engineering concepts exhibit properties of emergent systems. However, students often lack a mental framework, or schema, for understanding emergence. Slotta and Chi posited that helping students develop a schema for emergent systems, referred to as schema training, would increase the understanding of challenging concepts exhibiting emergent properties.

Purpose: We tested the effectiveness of schema training and explored the nature of challenging concepts from thermodynamics and heat transfer. We investigated if schema training could (a) repair misconceptions in advanced engineering students and (b) prevent them in beginning engineering students. …

Elementary Teachers’ Mental Images Of Engineers At Work, Rebekah Hammack, Juliana Utley, Toni Ivey, Karen High

Journal of Pre-College Engineering Education Research (J-PEER)

The purpose of the current study was to determine the impacts of a multiple-day engineering-focused professional development program on elementary teachers’ perceptions of the work of engineers and their use of mathematics and science. Data were collected in the form of drawings of engineers prior to and immediately after the professional development program as well as an open-ended exit survey at the end of the program. Participants’ drawings were scored in the following areas: use of mathematics, use of science, and work of an engineer. Wilcoxon signed-rank tests revealed that the only significant change between measures was in ‘‘work of …

The Importance Of Collaborative Design For Narrowing The Gender Gap In Engineering: An Analysis Of Engineering Identity Development In Elementary Students, Mandy Mclean, Jasmine M. Nation, Alexis Spina, Tyler Susko, Danielle Harlow, Julie Bianchini

Journal of Pre-College Engineering Education Research (J-PEER)

Research suggests that, to narrow the gender gap in engineering, we should focus on helping young girls identify with engineering both because gendered attitudes emerge around kindergarten and because identity is more predictive than performance on persistence in the field. This qualitative study sought to understand the impact of collaborative engineering design on the development of engineering identities in elementary-school students and compared the findings across gender. We focused on three tiers of collaboration embedded into the engineering design process: peer groups, role models, and shared goals. More specifically, the elementary students worked in small teams and partnered with undergraduate …

An Evaluation Of Technical Oral Presentation Components In Engineering, Mohamed Abdullah Adnan

Student Works (2020-2029)

This case study evaluates implementation of Technical Oral Presentations (TOP) components in English for Specific Academic Purposes (ESAP) language course for engineering undergraduates at a technical university. The respondents were 310 engineering undergraduates who registered for English Technical Communication (ETC) course and 12 instructors from Universiti Malaysia Pahang. The case study employs Convergent Parallel design to collect data in all four evaluation components of Context, Input, Process and Product (CIPP) Evaluation Model. Two questionnaires were administered in this study. The Questionnaire Set A were distributed to English language instructors teaching English for Technical Communication course while the Questionnaire Set B …

Possible Self Dynamics Of Community College Students Engaged In 3d Printing In Informal Environments, Lawrence Ralph Nightingale Jr.

Educational Leadership & Workforce Development Theses & Dissertations

The overall number of students from diverse backgrounds and women that graduate from community college with degrees in high paying Science Technology Engineering and Mathematics (STEM) disciplines is unacceptably low. The number of opportunities to gain exposure to STEM-based expressions of technology to overcome the dearth of exposure in high school is limited in community college. 3D Printing uses computer-controlled machines to build physical objects one layer at a time starting from the bottom up. The computer-controlled nature of 3D Printing provides a low risk, low cost platform to exercise elements of computer programming and engineering.

This study was a …

National Summer Transportation Institute: Increasing Career Awareness In Civil Engineering For Underserved High School Students, Melanie L. Villatoro, Janet Liou-Mark

Publications and Research

Our nation needs to increase the number of students pursuing degrees in the fields of Science, Technology, Engineering, and Mathematics (STEM) and those leading to transportation-related careers. In order to meet the demand for qualified graduates in transportation, it is necessary to diversify the pool of students entering college with an interest in these fields. The National Summer Transportation Institute (NSTI) is an educational initiative developed by the Federal Highway Administration (FHWA) and Department of Transportation (DOT). The NSTI at City Tech was designed to increase awareness of transportation-related careers among New York City high school students. The structure of …

Breaking Down The Silos: Innovations For Multidisciplinary Programs, Jillana Finnegan, Donna C. Llewellyn

University Author Recognition Bibliography: 2020

Universities, colleges and academic departments acknowledge the need for more collaborative, multidisciplinary, entrepreneurial, and global education. Unfortunately, this is no trivial task. Centuries of tradition have produced institutional silos, reinforced by layers of policy and cultural differences between academic departments, between colleges, and between academic and non-academic units. Successful multidisciplinary programs require programmatic and administrative innovation that meet faculty, student and institutional needs and leverage available resources. The Vertically Integrated Project (VIP) model, in place at thirty-seven institutions, has achieved notable success in these areas. This paper profiles innovations from ten VIP Programs in three areas: institutional organization, program organization, …

Revolutionizing The Mechanical Engineering Undergraduate Curriculum, Shelby Ann Mcneilly, Krishna Pakala, Donald Plumlee

Mechanical and Biomedical Engineering Faculty Publications and Presentations

As the age of technological advancement and occupational opportunity continues to progress, companies must be constantly adjusting and transforming in order to accommodate industry demands. With these quickly developing requirements comes an expectation of employee experience and skill sets. For individuals seeking a career in mechanical engineering, moving forward with the tools necessary for success in this continuously evolving world begins with higher education. This paper is the first of a three-part series to report on the progress of Boise State University’s Mechanical and Biomedical Engineering Department’s mission to implement a revolutionized curriculum in their academic program. This paper will …