Engineering Education Commons^™

Community College Engineering Degree Partnerships With 4-Year Universities, Jeffrey Mark Stear

Electronic Theses and Dissertations

Increasing the number of STEM professionals and reducing inequities in STEM are national priorities. Community colleges are important to address these concerns because they represent a higher percentage of underrepresented minority (URM) and women students. However, students starting 4-year STEM degrees in community college have had a lower completion rate. Partnerships between community colleges and 4-year universities have the potential to improve success for community college students, but more research is necessary. The purpose of this ex post facto, quantitative, correlational study was to determine the relationships among participation in different types of partnerships between community colleges and 4-year universities, …

A Comparison Of Western And Eastern Soft Systems Approaches, John L. Anaya, John L. Anaya, John L. Anaya

Master's Theses

Soft System Approaches have been developed worldwide to help problem-solvers and decision-makers develop solutions to complex problems, such as aerospace systems. Soft System Approaches were designed to help lower the disorder of developing a complex system by increasing understanding of a situation. Four Soft System Approaches were investigated, two from the West and two from the East. Within the context of the paper, the West refers to thought patterns associated with thinkers and scientists in Europe and North America, and the East refers to those from and around China. The two from the West are Peter Checkland’s Soft Systems Methodology …

Graduate School Academic Catalog 2024-2025, Graduate School Of Engineering And Management, Air Force Institute Of Technology, Walter F. Jones

AFIT Documents

No abstract provided.

Undergraduate Research On 5g Propagation Analysis In Naval Ship Environment, Otilia Popescu, Dimitrie Popescu, Murat Kuzlu

Engineering Management & Systems Engineering Faculty Publications

Wireless communication systems have experienced rapid advancements over the last decade, with 5G systems becoming the regular standards and 6G systems being under development. However, the naval ship environment still requires more study due to the special indoor characteristics of the spaces below the deck, where the metal structures strongly impact the propagation characteristics, being prone to signal degradation, dead spots, and unreliable connectivity. This paper presents the research work conducted by a team of undergraduate students from Electrical and Computer Engineering (ECE) and Electrical Engineering Technology (EET) majors. The work was a partnership between Old Dominion University engineering programs …

Silence Is Not Golden: Exploring The Trade-Offs Between Transparency And Burden In Dirs Reporting, Katie Nelson

Murray State Theses and Dissertations

This study explores the United States federal government's Disaster Information Reporting System (DIRS), which is an instrument that is used during emergencies to gather information on what five communication avenues are not actively working at the time of the emergency or during the recovery process. The synthesis provides a framework for characteristics that cite the necessities for this study on DIRS. Examining DIRS will help us understand its strengths, limitations, and potential improvements. Evaluating the details of historical and global research on emergency communications are gathered. The analysis provides insights into DIRS's past, present, and future. Bring to light future …

Reflections Of Undergraduate Engineering Students Completing A Cross Disciplinary Robotics Project With Pre-Service Teachers And Fifth Graders In An Electromechanical Systems Course, Krishnanand Kaipa, Jennifer Kidd, Isaac Koduah Kumi, Stacie I. Ringleb, Orlando M. Ayala, Kristie Gutierrez, Francisco Cima, Danielle Marie Rhemer

Mechanical & Aerospace Engineering Faculty Publications

Engineering is becoming increasingly cross-disciplinary, requiring students to develop skills in multiple engineering disciplines (e.g., mechanical engineering students having to learn the basics of electronics, instrumentation, and coding) and interprofessional skills to integrate perspectives from people outside their field. In the workplace, engineering teams are frequently multidisciplinary, and often, people from outside of engineering are part of the team that brings a product to market. Additionally, teams are often diverse in age, race, gender, and in other areas. Teams that creatively utilize the contrasting perspectives and ideas arising from these differences can positively affect team performance and generate solutions effective …

A Point Of Singularity For Technology And Engineering Education, Philip A. Reed

Educational Leadership & Workforce Development Faculty Publications

[First paragraph] I attended graduate school at Virginia Tech in the late 1990's and some of my fondest memories are from the side conversations with the faculty. The faculty at that time consisted of my mentor and program leader, Jim LaPorte, and other leaders in the field: Allen Bame, Sharon Brusic, Tom Jeffries, and Mark Sanders. Bill Dugger had recently retired from the university but maintained an office in Blacksburg to work full time on the Technology for All Americans Project (TfAAP, ITEEA, 2024) and he was very gracious about hosting students at the TfAAP office …

Impacts Of Open-Source Hardware Movements On Electronics Engineering Educational Outcomes, Angelica Tolentino Masa, Ralph Anthony Ramos Rafael, King Harold A. Recto

Electronics, Computer, and Communications Engineering Faculty Publications

The integration of the Open-source Hardware (OSHW) movement into electronics engineering education has not only democratized access to intricate designs but has also transformed the pedagogical landscape. OSHW's principles, inspired by the open-source software paradigm, have given rise to a collaborative learning environment where students bridge the gap between theoretical knowledge and practical application. This research, conducted through a rigorous methodology encompassing literature review, thematic analysis, and purposive sampling from reputable academic sources like IEEE Xplore, highlights the significant potential of OSHW. It not only enhances curriculum development and practical skill acquisition but also fosters a sense of global community …

Teaching Analytics Online: A Self-Study Of Professional Practice, Andrew J. Collins, Brandon Butler, James F. Leathrum Jr., Christopher J. Lynch

Engineering Management & Systems Engineering Faculty Publications

As the COVID-19 pandemic caused severe disruption to education enterprises throughout the world, the main response by educational institutions was to move to online learning environments. The purpose of this study was to understand better how instructors could improve online learning for a professional-level week-long short course in a highly technical area (data analytics), which had, pre-COVID, been a hands-on computer, laboratory-based learning experience. The authors used self-study of professional practice to elicit and understand the major issues and concerns of the transition to an online learning environment. Under the guidance of a colleague in teacher education, three course instructors …

Integrated Stem Education And Students' 21st Century Skills, Jung Han, Yunjin Lim, Woongbin Park, Kyongson Park

Indiana STEM Education Conference

This research investigates the impact of integrated STEM education on students' 21st century competencies, aiming to enhance science and engineering design teaching within a local design-based context. Specifically, the project targets high school students in a rural area and utilizes local contexts, including local rural knowledge and indigenous science knowledge, to facilitate STEM learning. The collaborative effort involves partnering high school environmental science and Technology and Engineering Educators, leveraging their diverse content expertise to teach students collaboratively as a science-technology and engineering teacher pair. Furthermore, university faculty members and industry partners provided support to create a STEM community of practice. …

Implementing Integrated Stem Forensic And Soil Sciences Lab Activities To Promote Interest In Stem Careers, Mariah K. Stollar Awan, Caroline J. Rakowski

Indiana STEM Education Conference

We implemented forensic and soil science integrated STEM lab activities with 11 middle school youth at a 4-H day camp at Purdue University. STEM perceived knowledge increased overall for participants. However, the pre- and post-assessments did not show a statistically significant difference. More students also indicated STEM career interest after participating. Because this study was exploratory and had a small sample size, more research on these integrated STEM lab activities should be conducted with larger samples.

The Future Of Future City: A Stem Program, Jeffrey A. Nowak, Shelby Werling

Indiana STEM Education Conference

The idea of integrating science, technology, engineering, and mathematics (STEM) is still an enigma for many educators (Dare et al, 2021). Recent academic standards favor curricula that interweave the principles of integrated STEM into all content areas. Finding a “one size fits all” curriculum is challenging, perhaps even impossible. Future City is a national program that specializes in hands-on cross-curricular STEM education. Students work collaboratively using an engineering and design process to showcase their solutions to citywide sustainability issues. This research brief examines how educators can utilize the Future City program as the cornerstone of their STEM curriculum.

The Impact Of Geospatial Contexts And Out-Of-School Experiences On Students' Stem Identity Formation, Hillary Ongoyo Omoze, Abigail Erskine, Asenath Odondi

Indiana STEM Education Conference

STEM teaching faces challenges in varied geospatial contexts (Mulvey et al., 2023), where place and space factors play a significant role. This research brief explores the influence of place and space in shaping students' STEM identities throughout their educational journey, with a specific emphasis on the role of out-of-school experiences in fostering student learning and interest in STEM careers, particularly among middle school students.

Proceedings Of The Ninth Annual Indiana Stem Education Conference: Resourcing Stem Education, William S. Walker Iii, Lynn A. Bryan, S. Selcen Guzey

Indiana STEM Education Conference

The Proceedings of the Ninth Annual Indiana STEM Education Conference are edited by the Center for Advancing the Teaching and Learning of STEM (CATALYST, https://www.education.purdue.edu/catalyst/) at Purdue University. The theme for the 2024 conference is Resourcing STEM Education. This year’s Indiana STEM Education Conference provides opportunities to learn about effective STEM education strategies, curriculum, and resources to engage students in integrated STEM learning opportunities and address the recently updated Indiana Academic Standards for Science and Computer Science, Indiana Academic Standards for Mathematics, and Indiana Academic Standards for Integrated STEM (https://www.in.gov/doe/students/indiana-academic-standards/).

Inaugural Future Of Bse Days: Workshop Report, Mark Stone

Department of Agricultural and Biological Systems Engineering: Presentations and White Papers

The inaugural Future of BSE Days (FBD) event, held on May 2-3, 2024, brought together the Biological Systems Engineering (BSE) community to discuss and shape the future of work and learning within the field. The event was designed to foster collaboration between faculty, students, industry leaders, and alumni, with the goal of reimagining the department’s educational approach, enhancing industry partnerships, and preparing students for the challenges of tomorrow. Over the course of two days, participants engaged in insightful discussions, workshops, and presentations that highlighted both the strengths of the department and opportunities for growth.

The workshop resulted in several key …

Student Use Of Anchors And Metacognitive Strategies In Reflection, Anu Singh, Heidi A. Diefes-Dux

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Context: Self-regulation, a skillset involving taking charge of one’s own learning processes, is crucial for workplace success. Learners develop self-regulation skills through reflection where they recognize weaknesses and strengths by employing metacognitive strategies: planning, monitoring, and evaluating. Use of anchors assists learners’ engagement in reflection. Purpose or Goal: The purpose of this work was to gain insight into students’ use of anchors when reflecting on their learning. The two research questions: (1) To what extent do students link their self-evaluation and learning objective (LO) self-ratings to their reflections? and (2) What dimensions and level of metacognitive strategies do students use …

Long-Term Impact Of A Semester-Long Multidisciplinary Service-Learning Assignment In A Fluid Mechanics Course, Orlando M. Ayala, Kristie Gutierrez, Isaac Koduah Kumi, Francisco Cima, Stacie I. Ringleb, Krishnanand Kaipa, Danielle M. Rhemer, Pilar Pazos, Jennifer Jill Kidd

Engineering Technology Faculty Publications

Seventy-three students who enrolled in a senior-year level fluid mechanics course during spring semesters from 2019-2023 were asked about their perceptions on the impact in their professional preparation of a semester-long multidisciplinary service-learning assignment. This paper aims to evaluate their current perceived impact of the assignment (long-term impact) and whether it might have changed from when they took the course (short-term impact). The project tested their creativity, knowledge of fluid mechanics concepts, and skills to work with people from other disciplines. They were told that they were working for a hypothetical company, “Engineering is for all,” and were assigned to …

Four Decades Of Distance Learning Instruction In An Electrical Engineering Technology Program, Otilia Popescu, Isaac L. Flory Iv, John R. Hackworth, Murat Kuzlu

Engineering Technology Faculty Publications

Online instruction is no longer a new or seldom used modality. It has grown over the last few decades, reaching a pinnacle during the recent pandemic. Different institutions and different programs chose different approaches for the online delivery of courses, adopting either synchronous or asynchronous deliveries for online students, and hybrid delivery for mixed groups of campus and online students attending the classes in a live or synchronous manner. This paper’s main goal is to present the history of over 40 years of distance learning in an Electrical Engineering Technology program and how the delivery mode progressed over time. While …

Advancing The Manufacturing Engineering Technology Pathway: Innovating And Developing The Curriculum (Courses And Labs) From Associate To Bachelor's Level, Afi Anuar, Vukica Jovanovic, Nathan Luetke, Hamid Eisazadeh, Isaac Flory Iv, Mileta Tomović, Anthony W. Dean

Engineering Technology Faculty Publications

The southeastern region of Virginia, specifically Hampton Roads, has a diverse manufacturing landscape encompassing a range of enterprises, from small businesses to large corporations. This sector includes shipbuilding, construction machinery, aeronautics, and food processing. However, both the region and the broader state of Virginia are struggling with a skilled labor shortage that fails to meet the demands of these manufacturing enterprises. This paper aims to provide insights into the recently established Manufacturing Engineering Technology (MFET) program at Old Dominion University, located in Norfolk, Virginia. The MFET program features a comprehensive curriculum, encompassing the development of new courses and the establishment …

A Project-Based Learning Activity For An Engineering Technology Heat Transfer Course To Design A Shell-And-Tube Heat Exchanger, Nathan Luetke, Orlando Ayala

Engineering Technology Faculty Publications

Thermofluids courses demand a strong grasp of mathematics and employ physics extensively to describe physical systems. Heat transfer, in particular, presents challenging topics, which can be even more daunting for engineering technology students. In this paper, we present the implementation of a project-based learning activity in the engineering technology heat transfer course. The students' task involves designing a shell-and-tube heat exchanger to meet specific minimum requirements. The objective is to provide students with a real-world assignment that enhances their heat transfer calculation skills. To accommodate instructors' busy schedules, we have developed an assignment that is user friendly. Detailed instructor guides …

The Benefits Of Interdisciplinary Learning Opportunities For Undergraduate Mechanical Engineering Students, Isaac Koduah Kumi, Stacie I. Ringleb, Francisco Cima, Orlando M. Ayala, Krishnanand Kaipa, Jennifer Jill Kidd, Kristie Gutierrez, Pilar Pazos, Danielle Marie Rhemer

Mechanical & Aerospace Engineering Faculty Publications

Two project-based learning approaches were implemented in a 100-level information literacy class in the Mechanical Engineering program at a mid-Atlantic university. One approach, the treatment group, partnered engineering students with education students to develop and deliver engineering lessons to elementary school students. In the second approach, the comparison group, engineering students were partnered with their engineering classmates to work on an engineering problem using the engineering design process. The two projects were designed to have similar durations and course point values. For both projects, teams were formed, and peer evaluations were completed using the Comprehensive Assessment of Team Member Effectiveness …

Immersive Virtual Labs For Enhancing In-Person And Online Education, Yiyang Li, Yuzhong Shen, Charles I. Sukenik

Electrical & Computer Engineering Faculty Publications

Labs play a critical role in science and engineering education, offering practical insights and hands-on experience to students that can't be achieved through theoretical learning alone. With the continuous advancement in technology, education is being reshaped and many universities are now offering online programs. This shift in educational paradigm offers students access to a wider range of academic resources, without being limited by geographical boundaries, time constraints, among others. However, the rise of online education also brings unique challenges, such as lack of face-to-face interaction and limited hands-on learning experiences. Virtual labs, which allow students to conduct experiments in a …

Visual Representation Based Creative Problem Solving (Cps) For Microelectronic Course, Gon Namkoong, Tian Luo

Electrical & Computer Engineering Faculty Publications

Microelectronic technologies become the basis for many modern revolutions and require technological innovation and creative transformation of new knowledge into products. This demands our engineering students to be more innovative and creative than ever. It also requires solid resources and strategies to cultivate higher-order thinking skills for engineering students. Presently, microelectronic course covers a wide range of topic areas, including basic semiconductor, pn junction diode, metal oxide semiconductor field effect transistor (MOSFET) and bipolar junction transistor (BJT) circuits. A traditional teaching strategy in a typical educational setting encompasses instructors delivering lectures to teach the basics and principles of microelectronic devices …

From Carnival Games To Plastic Filters: Preparing Elementary Preservice Teachers To Teach Engineering, Jennifer Kidd, Pilar Pazos, Kristie Gutierrez, Danielle Rhemer, Stacie Ringleb, Krishna Kaipa, Isaac Kumi, Orlando Ayala, Francisco Cima

Teaching & Learning Faculty Publications

Preservice teachers (PSTs) in an educational foundations course were tasked with leading elementary students in an engineering design challenge. In order to explore different approaches for helping the PSTs develop competence in engineering education, two implementation methods were tested. In Spring 2022, PSTs collaborated with undergraduate engineering students to develop carnival-themed design challenge lessons. In Fall 2022, PSTs worked with their PST classmates to teach a professionally prepared engineering lesson focused on designing plastic filters. PSTs’ knowledge of engineering and engineering pedagogy were compared across the two semesters using an exploratory approach. Both groups showed increases in engineering knowledge and …

On Confidence And Sense Of Belonging In Cybersecurity Students: Analysis & Prediction, Sadaf Amna Sarwari

Graduate Theses, Dissertations, and Problem Reports (ETD)

In recent years, there has been a rapid expansion of cybersecurity programs across higher education institutions in response to the widening skills gap in the cybersecurity job market. This study adopts quantitative and qualitative approaches to identify factors influencing West Virginia University (WVU)’s LANE Department of Computer Science and Electrical Engineering (LCSEE) students’ confidence and sense of belonging in the cybersecurity field. The results are based on data collected from surveys administered to LCSEE students in April 2022 and April 2023. The responses were analyzed using descriptive & inferential statistics and logistic regression techniques. Additionally, the 2023 data was utilized …

First-Year Engineering Students’ Motivation To Participate In Virtual International Collaborative Experiential Program (Vicep): An Expectancy-Value-Cost Approach, Cedrick Kwuimy, So Yoon Yoon

Journal of International Engineering Education

Changes in course delivery mechanisms necessitated by the COVID-19 pandemic created an opportunity to develop a Virtual International Collaborative Experiential Program (VICEP) as an alternative to traditional, travel-based study abroad programs. This paper presents the results of an investigation of engineering students’ motivation, perceived challenges, and preferred geographic areas for the VICEP. A sample of 116 first-year engineering students at the University of Cincinnati responded to survey items regarding their perceptions of motivation to participate in the VICEP, including in terms of expectancy, value, and cost, along with open-ended questions. Both male and female students scored the highest on value …

Library Steam Kits: Developing Circulatable Curriculum For Community Steam Learning, Daphne Fauber, Ashley Fletcher

Purdue Journal of Service-Learning and International Engagement

Public libraries serve as repositories for a movement described as cultivation of the Library of Things. In the wake of COVID-19, the West Lafayette Public Library enhanced its existing Library of Things collection through the creation of science, technology, engineering, art, and mathematics (STEAM) kits. Since 2017, the West Lafayette Public Library has held regular free STEAM programs for the community; those programs were put on hold during the height of the COVID-19 pandemic, which concurred with a library renovation. These kits provide the community with the ability to learn STEAM concepts at home engaging, hands-on activities that may otherwise …

Guidelines For Sustainable Use Of Mobile Instant Messaging Apps In Higher Education: A South African Case Study, Bronwyn C. Swartz, Sweta Patnaik

Higher Learning Research Communications

Objective: The purpose of the study was to propose guidelines to facilitate the sustainable and successful use of mobile instant messaging apps for learning and teaching based on a review of the literature and perceptions of educators. Fraser’s model of redistribution, recognition, and representation served as the theoretical framework. This study provides a mechanism for the development of a socially just and inclusive online classroom environment.

Method: We conducted two focus groups (n = 4 and n = 3) in November 2021 at a university of technology in South Africa to explore the perceptions of educators on using mobile …

Teaching Learning Newsletter Vol 3 Issue 3, Sastra Deemed To Be University

TLC Newsletter

No abstract provided.

Embracing Identities And Affirming Agency: Exploring Effective Mentorship For Women Doctoral Students In Engineering Disciplines Using An Intersectional Lens, Jennifer Brown

All Dissertations

Positive mentoring experiences are crucial for retaining and advancing those who hold marginalized identities in STEM, as they foster a greater sense of belonging and self-efficacy that encourage these students to persist in their fields. Marginalized identities in STEM include, but are not limited to, women, BIPOC (Black, Indigenous, and People of Color), low-income, first-generation, neurodivergent, and members of the LGBTQ+ community. Oftentimes, these identities intersect, introduce additional nuance in interactions within engineering spaces, and affect the mentoring support that both mentees and their mentors require.

Prior research has shown the reciprocal value that is created when graduate students are …