Engineering Education Commons^™

Answering Food Insecurity: Serving The Community With Food And Knowledge Using Technology, Courtney Simpson

Purdue Journal of Service-Learning and International Engagement

The courses of Tech120, CGT110, and ENGT 180/181 and Red Gold at Purdue collaborated to design a robot that would plant and water a garden for a local community charter school. The students centered the project on the users’ needs for fresh food, nutrition education, and early exposure to STEM for children. The school, Anderson Preparatory Academy (APA), is comprised of many children who come from low-income families and are in the free or reduced lunch program. Inspired from “Farm Bot,” a similar system that allows for almost hands-free gardening, the “Boiler Bot” is designed to be scalable so children …

Bim+Blockchain: A Solution To The Trust Problem In Collaboration?, Malachy Mathews, Dan Robles, Brian Bowe

Conference papers

This paper provides an overview of historic and current organizational limitations emerging in the Architecture, Engineering, Construction, Building Owner / Operations (AECOO) Industry. It then provides an overview of new technologies that attempt to mitigate these limitations. However, these technologies, taken together, appear to be converging and creating entirely new organizational structures in the AEC industries. This may be characterized by the emergence of what is called the Network Effect and it’s related calculus. This paper culminates with an introduction to Blockchain Technology (BT) and it’s integration with the emergence of groundbreaking technologies such as Internet of Things (IoT), Artificial …

Improving Disciplinary Literacy In An Electronics Course, Ohbong Kwon, Juanita C. But, Sunghoon Jang

Publications and Research

Electronics (EMT1255) is a required course for the Associate Degree in Applied Science (AAS) in Electromechanical Engineering Technology (EMT) at New York City College of Technology. EMT1255 introduces semiconductor devices and their applications in electronic-circuits. Students are expected to understand the structures and principles of semiconductor devices and the configuration and principles of basic electronic circuits. They also learn to analyze and design electronic circuits. In the lab setting, they acquire troubleshooting knowledge and hands-on technical skills. In this reading intensive course, students need to read the lab manual and a textbook of over 700 pages. Therefore, reading and understanding …

A Mobile Platform Using Software Defined Radios For Wireless Communication Systems Experimentation, Otilia Popescu, Shiny Abraham, Samy El-Tawab

Engineering Technology Faculty Publications

A distinctive feature of wireless communication systems is implied by the fact that there is no physical connection between the transmitter and its corresponding receiver, which enables user mobility. However, experimenting with wireless communication systems is mostly done in the lab, where transmitters and receivers are setup on benches, in stationary settings. This prevents students from experiencing fading and other propagation effects associated with mobile wireless channels. This paper describes a mobile platform for wireless communication experimentation that enables students to run experiments beyond the confines of a traditional lab, in realistic settings that cover indoor and outdoor scenarios with …

Hands-On Learning Environment And Educational Curriculum On Collaborative Robotics, Ana Djuric, Jeremy L. Rickli, Vukica M. Jovanovic, Daniel Foster

Engineering Technology Faculty Publications

The objective of this paper is to describe teaching modules developed at Wayne State University integrate collaborative robots into existing industrial automation curricula. This is in alignment with Oakland Community College and WSU’s desire to create the first industry-relevant learning program for the use of emerging collaborative robotics technology in advanced manufacturing systems. The various learning program components will prepare a career-ready workforce, train industry professionals, and educate academicians on new technologies. Preparing future engineers to work in highly automated production, requires proper education and training in CoBot theory and applications. Engineering and Engineering Technology at Wayne State University offer …

Polyfs Visualizer, Paul Martin Fallon

Master's Theses

One of the most important operating system topics, file systems, control how we store and access data and form a key point in a computer scientists understanding of the underlying mechanisms of a computer. However, file systems, with their abstract concepts and lack of concrete learning aids, is a confusing subjects for students. Historically at Cal Poly, the CPE 453 Introduction to Operating Systems has been on of the most failed classes in the computing majors, leading to the need for better teaching and learning tools. Tools allowing students to gain concrete examples of abstract concepts could be used to …

Effects Of Computer Program Visualization Tools On Student Populations, Meghan Jayne Peterson

All Graduate Theses, Dissertations, and Other Capstone Projects

This study examined how program visualization tools affect Advanced Placement Computer Science students' understanding of abstract programming concepts. A literature review was conducted to determine if program visualization is effective and which students benefit from it the most. The findings were used to design a causal comparative study in which students would experience instruction with and without program visualization. The study took place in an AP Computer Science course during the first challenging unit about an abstract concept: loops. Participants (n = 24) were selected using convenience sampling and were assessed before, during, and after the study took place. While …

Can You Hack It? Validating Predictors For It Boot Camps, Courtney Gear

All Graduate Theses, Dissertations, and Other Capstone Projects

Given the large number of information technology jobs open and lack of qualified individuals to fill them, coding boot camps have sprung up in response to this skill gap by offering a specialized training program in an accelerated format. This fast growth has created a need to measure these training programs and understand their effectiveness. In the present study, a series of analyses examined whether specific or combinations of predictors were valid for training performance in this coding academy. Self-rated, daily efficacy scores were used as outcome variables of training success and correlation results showed a positive relationship with efficacy …

Teaching Robot Kinematics For Engineering Technology Students Using A Created Three-Dimensional Robot And Camera, Cheng Y. Lin, Yuzhong Shen

Engineering Technology Faculty Publications

Teaching robot kinematics is important to engineering technology students in the robot automation. The study can help students not only in the coordinate transformation principles from a joint to its following joint in a robot, but also in relating the coordinate systems between a robot and a machine vision system. While students can utilize math software to compute robot kinematic transformations, they have problems verifying their answers. In this paper, a three dimensional vertically articulated robot is created to help students visualize the location and orientation of the end effector. Students can check their robot kinematic answers based on the …

In-Shoe Plantar Pressure System To Investigate Ground Reaction Force Using Android Platform, Ahmed A. Mostfa

Theses and Dissertations

Human footwear is not yet designed to optimally relieve pressure on the heel of the foot. Proper foot pressure assessment requires personal training and measurements by specialized machinery. This research aims to investigate and hypothesize about Preferred Transition Speed (PTS) and to classify the gait phase of explicit variances in walking patterns between different subjects. An in-shoe wearable pressure system using Android application was developed to investigate walking patterns and collect data on Activities of Daily Living (ADL). In-shoe circuitry used Flexi-Force A201 sensors placed at three major areas: heel contact, 1st metatarsal, and 5th metatarsal with a PIC16F688 microcontroller …

Industry-University Collaboration: A University Of Dayton Model, Guru Subramanyam

Electrical and Computer Engineering Faculty Publications

This paper introduces industry-university collaboration activities currently in place at the University of Dayton's School of Engineering. These collaborations are important to prepare industry-ready graduates who excel in technical, entrepreneurial, and leadership skills. One of the key curricular components is the industry-sponsored multidisciplinary projects. Industry involvement in advisory committee, strategic research partnerships, and other forms are discussed.

Efficacy Of Replacing Ti Launchpad With Pyboard In Cpe 329 Curriculum, Anthony Miller, Dominic Romualdo

Computer Engineering

The goal of the current project was to determine if the PyBoard microcontroller is a suitable replacement for the Texas Instruments MSP-430 Launchpad in the Computer Engineering 329 Microcontrollers class at Cal Poly. The major projects from CPE 329 where attempted using the PyBoard in place of the MSP-430. The PyBoard was found to be a powerful and fairly capable platform for learning to develop embedded systems. Some of the benefits of the PyBoard were found to be it's ease of rapid prototyping, a fairly large collection of libraries with useful tools for microcontrollers, and many powerful abstractions that take …

Preparing Students For The Advanced Manufacturing Environment Through Robotics, Mechatronics, And Automation Training, Ana M. Djuric, Vukica Jovanovic, Tatiana V. Goris

Engineering Technology Faculty Publications

Automation is one of the key areas for modern manufacturing systems. It requires coordination of different machines to support manufacturing operations in a company. Recent studies show that there is a gap in the STEM workforce preparation in regards to highly automated production environments. Industrial robots have become an essential part of these semi-automated and automated manufacturing systems. Their control and programming requires adequate education and training in robotics theory and applications. Various engineering technology departments offer different courses related to the application of robotics. These courses are a great way to inspire students to learn about science, math, engineering, …

Building A Better Computer For The Aging Generation, Gretchen Baird, Boryeon Kwon, Dylan Lasner, Parker Swensen, Zane Ross, Adrik Gurganus

PSU High School Innovation Challenge

The problem which we have ventured out to solve is that the aging community does not have easily accessible computers and technologies.

Lifebrace: The Advanced Health Tracking Wristband, Jeremy Ferrando, Dylan O'Brien, Daniel Ortiz, Jonah Paivarinta

PSU High School Innovation Challenge

Over 28 million Americans have diabetes or pre-diabetes. Every 33 seconds someone dies of heart disease, claiming more lives than AIDS and all forms of cancer combined. Falls are the leading cause of fatal and non fatal injuries to elderly people.

These problems require constant supervision and frequent treatments to keep a patient stable, and they all become more serious with age. People with diabetes, heart conditions, or other debilitating conditions need frequent check-ups, and are always in danger of accidents. They also often need frequent doses of medicine.

The only way that these conditions can be monitored properly is …

Tech For Arthritis, Alex Gaiovych, Anna Velikoretskikh, Ephraim Lee, Karl Stephenson, Kevin Wu, Miguel Campos, Veyda Campos

PSU High School Innovation Challenge

In an era where technological advances are made on almost a daily basis, there are still many people who aren’t able or are scared to use modern technology. While computers and phones get smarter and more powerful, they are also getting smaller and more precise. Trying to push a tiny button, either real or virtual, can be a real problem for those who suffer from arthritis.

According to www.arthritis.org, over 50 million people are diagnosed with arthritis, most of which are senior citizens. Many of these seniors don’t use technology to its full potential because they simply can’t. For some, …

Implementing Mechatronics Design Methodology In Mechanical Engineering Technology Senior Design Projects At The Old Dominion University, Vukica M. Jovanovic, Jennifer G. Michaeli, Otilia Popescu, Moustafa R. Moustafa, Mileta Tomovic, Alok K. Verma, Cheng Y. Lin

Engineering Technology Faculty Publications

In recent years, the nature of engineering design has changed due to advances in embedded system design and computer technologies. It is rare to engineer a purely mechanical design that does not incorporate electrical and electronic components. Mechanical engineers and mechanical engineering technologists must possess a multi-disciplinary knowledge with the understanding of both mechanical and electrical systems. For this purpose, undergraduate programs in engineering technology have added mechatronics courses to their curriculum. Mechatronics is a design process that is multi-disciplinary in nature and integrates principles of many engineering disciplines including, but not limited to, mechanical engineering, electrical engineering, and controls …

Hands-On Homework Or Laboratory Development For Distance Learning Students In Programmable Logical Controller (Plc), Cheng Y. Lin, Yuzhong Shen, Mileta Tomovic

Engineering Technology Faculty Publications

When teaching PLC classes in the distance-education (DE) program, one of the main problems is to provide hands-on experience to students. This is because students can only use design software to complete their homework and lab problems without being able to touch PLCs or wire ladder logic diagrams. In this paper, the authors develop a virtual laboratory to help DE students gain hands-on wiring experience in the automation control classes. The development significantly shortens the gap on the issue of hands-on experience between on-campus students and DE students. To increase the performance of safety and effectiveness, on-campus students can also …

A Collaborated Process With A Wireless Autonomous Vehicle At It's Center, Thomas B. Stout, Steve C. Hsiung

Engineering Technology Faculty Publications

Developing partnerships between high schools, community colleges and universities is critical for the successful transitions to a lifelong STEM careers. How do you develop these partnerships? The sharing of a technology platform such as autonomous vehicles can bridge the gap by using a common core group of materials. Collaborations between teachers and faculty indifferent schools that share common interests in teaching control systems and robotics technology can be an excellent start. The university as catalyst in the process by designing the curriculum, system hardware and software then through the common interest deploying them in the high schools and community college. …

Delivery Of Hands-On Technical Courses Through Real-Time Distance Learning, Steve C. Hsiung, John M. Ritz, Ece Yaprak, Feng Jao

Engineering Technology Faculty Publications

It is generally believed that it is too challenging to deliver technical laboratory courses using distance learning technologies. The focus of this research was to develop strategies that may be used to address these challenges. A research team composed of faculty from several universities and community colleges explored what might be needed to make these types of technical laboratory course instruction possible using distance learning technologies. The team explored delivering a microcontroller embedded systems design course through audio-visual distance learning technologies. The team's research and development activities are discussed. These include focuses on the technical training equipment that had to …

Dissemination Of Microprocessor Courses Through Classroom And Interactive Cyber-Enabled Technologies, Steve C. Hsiung, John M. Ritz, Ece Yaprak, Thomas B. Stout, Richard L. Jones

Engineering Technology Faculty Publications

The project is in the middle stages of the implementation. There seems to be a positive attitude of learning and using of the training system and curriculum package by all project staffs. Microchip, Inc. and microEngineering Labs, Inc. have donated supplies to support the hardware and software development for this project. The next objectives are team training, recruitment of interested trainees/teachers to participate in training for summers 2014, and assess the effectiveness of the implementations with teachers and students. Photo 2 is the project logo that describes all the concepts of this project.

Development Of Pneumatic Robot For Outreach, Eshamogbo E. Ojuba, John Lumkes

The Summer Undergraduate Research Fellowship (SURF) Symposium

To encourage the current generation of high school and middle school students to pursue careers in engineering, it is important to have challenging hands-on engineering activities for them. Such activities should be interesting, compelling, and, most importantly, educative. A mini-excavator was built for fluid power outreach, but this tool only demonstrates fluid power, without showing other important aspects of engineering. The tool being developed is able to demonstrate fluid power, as well as other important aspects of engineering, such as controls, electronics, and programming. This tool is an electronically-controlled device that allows the user control a pneumatic circuit, coupled with …

Wireless Ad Hoc Networks For Mobile Devices Via High Frequency Sound Waves, Yashar Bahman

Computer Engineering

The purpose of this research it to give mobile phones the ability to create a cross-platfor wireless ad-hoc network. To accomplish this the phone’s speaker/microphone will be treated as a modulator/demodulator (or modem for short). The idea is that the phone will generate sine waves at various frequencies to output them on the speaker on one end and also record audio with the microphone to analyze and decode it into data on the other.

Once complete, these functionalities will all be rolled up into one easy to use library named Wave, which can be used to send data back and …

Implement Smart Sensors With Wireless Communication Protocols With Embedded Microcontrollers In A Capstone Project Design, Steve C. Hsiung, Cory T. Gleason, Lacides A. Osorio, Charles H. Mcginn

Engineering Technology Faculty Publications

Wireless communication has become popular and widely used in our daily lives. Their applications are: Cellular Wireless for telephone systems, data collection, voice communication, and other mobile or extremely remote devices, Bluetooth for low-power applications in short range and moderate date bandwidth, Proprietary ISM (industrial, scientific, medical) protocols used in open frequency bands from 260 to 470 MHz, 902 to 928 MHz, and 2.4GHz, 802.11/WiFi in wireless data communications, 802.15/ZigBee for mesh networks of sensors and controllers, and Z-Wave for low speed wireless protocol of home electronics devices to intercommunicate using reliable protocol that easily travels through walls, floors, and …

Automation Laboratory Development Focusing On Industrial Hands-On Experience, Simulation Software, And Application Research Projects, Cheng Y. Lin, John R. Hackworth

Engineering Technology Faculty Publications

This paper describes the development of an Automation Control Lab in the Department of Engineering Technology at the University. The lab facility includes pneumatic actuators/sensors, electrical relays/switches, and Programmable Logic Controllers (PLC). The major goal of the development is to help students gain hands-on industrial experience by conducting simple projects during the lecture hours and more advanced projects during the lab hours. Simulation software is also applied to reduce implementation time when developing complicated pneumatic circuits and PLC programs. In addition, three examples of industrial automation projects using PLC from the Technology Application Center (TAC) are also introduced to students …

Education On Conceptual Modeling For Simulation- Beyond The Craft: A Summary Of A Recent Expert Panel Discussion, Durk-Jouke Van Der Zee, Andreas Tolk, Mike Pidd, Kathy Kotiadis, Antuela A. Tako

Computational Modeling & Simulation Engineering Faculty Publications

No abstract provided.

Do We Need M&S Science?, Jose J. Padilla, Saikou Y. Diallo, Andreas Tolk

VMASC Publications

No abstract provided.

Design And Implement A Cost-Effective Wireless Communication Project On A Pic Training System, Steve Hsiung, Walter F. Deal, Lacides Agustin Osorio, Mathew Henderson

Engineering Technology Faculty Publications

Wireless communication becomes popular and widely used in almost every electronic product in our daily life. The RF communication is one of the major wireless applications in consumer products. Usually, it is integrated with an embedded system (microcontroller) to control various applications such as temperature sensing, data logging, data exchange, actuator activation, and user interaction wirelessly. A project based model can be used as an effective instructional strategy to enhance learning about complex RF concepts and technologies. The project method can lead to improved understanding and create interest by actively engaging the student with hands-on and problem solving and critical …

Reactivation Of A Six-Degree-Of-Freedom Repeated Impact Machine Using Programmable Logical Controller (Plc), Cheng Lin

Engineering Technology Faculty Publications

Reactivation of a six-degree-of-freedom impact machine using Programmable Logical Control (PLC) is presented. The output from the machine is the history of accelerations collected from accelerometers attached at the testing article and a load cell mounted at the rubber pad where the impact occurs. Readings of the acceleration and impact force are sent to a PC for analysis through a data acquisition device (USB 6251) and Labview software provided by National Instrument (NI). Result shows that the machine can repeatedly generate an impact force up to eleven Gs. Demonstration of the project can be used as one of labs in …

System Design And Integration For Repeated Impact Tests, Cheng Lin, Gene Hou, Sebastian Bawab, Timothy Coats, Hesham Nassar

Engineering Technology Faculty Publications

The design and integration of an impact-testing machine is particularly for the test of an object which is repeatedly dropped down from a specified height. Four linear actuators with two on each of the two magnetic rails are used to lift up an object weighing up to 70 lbs. Each actuator is powered and controlled by an industrial amplifier. A Programmable Logical Controller (PLC) is applied to activate these four actuators simultaneously and repeatedly. Accelerometers using an National Instruments (NI) data acquisition system are used to measure the impact force during the tests. Students gain design and implementation experiences from …