Systems and Communications Commons^™

Exploration Of Software Defined Radios To Increase Capabilities Of Affordable Mesh Networks, Liam K. Mccarthy

Electrical Engineering

Project OWL is developing a LoRa mesh network “DuckLinks” for emergency communications, and the current LoRa protocol the Clusterduck Protocol is based on is severely limited in data rate. OWL plans to use Raspberry Pi computers to develop the next phase of Duck radios, which greatly opens the computing potential and flexibility of the system the Ducks run on. Using LimeSDR and GNU Radio, an open source SDR programming environment, this project seeks to develop a simple SDR-based packet transmission system that allows for communication with Duck radios as well as the use of a different modulation scheme for higher …

Advancing Embedded Iot Architectures For Space And Terrestrial Applications, Wuwei Douglas Liu, Nicolas Jesus Alvarez, Eric Huang

Electrical Engineering

Radio transceivers play a pivotal role in establishing communication networks, particularly in regions where existing infrastructures are unstable or compromised due to natural disasters or conflicts. By utilizing LoRa (Long Range) communication technology, OWL Integrations develops radio transceivers to establish mesh networks to communicate with one another during disasters. This project team continues development of a second generation OWL board, classified as Quacker Advanced Development (QuAD), with a focus on transitioning to a new microcontroller and integrating GNSS libraries and drivers. An ulterior objective involved R&D for a space application of the board.

Software Defined Radio Applicability Investigation For Owl Integrations Inc., Daniel J. Gharib

Electrical Engineering

OWL Integrations Inc. is developing a LoRa mesh network using “Duck” radios to communicate using the LoRa modulation technique. This mesh network is intended for emergency communications in situations where Internet or cellular access is unavailable, such as disaster relief or warzones. The goal of this project is to investigate the feasibility of using the CaribouLite SDR as a potential base for a SDR-based “Duck”. This feasibility testing will be performed by integrating the CaribouLite with a Raspberry Pi single-board computer and investigating its compatibility and functionality for the purposes of a communication device

Multi-Hop And Automated Testing Of Wide-Area Network Radio Systems, Zachary C. Numa, Joseph S. Nuccio

Electrical Engineering

Requests for low-power and versatile wide-area Internet-of-Things (IoT) networks are becoming more prevalent with upcoming research in low-data rate ad-hoc mesh networks. Connections to terrestrial satellites have proven promising methods for increasing range capabilities for wide area networks (WAN). As research in communication with IoT networks and satellites progresses, reliable multi-hop mesh networks for Earth-based communication are still necessary to develop the base for satellite communication. These multi-hop communication mesh networks are being developed to allow communication where Line-of-Sight (LOS) from A to B is incapable due to environmental barriers. Hence, communication is possible without LOS by providing an intermediate …

Light Based Wireless Communication, Nick Ghaffarian, Gibson Puckett

Electrical Engineering

The demand for high-speed, secure wireless communication is escalating, particularly in high-density environments like urban areas, and critical sectors such as healthcare and defense. Traditional Wi-Fi struggles with issues like signal congestion, electromagnetic interference, and security vulnerabilities, compromising connectivity quality. LiFi is much more suitable for areas like hospitals which contain equipment highly sensitive to electromagnetic interference, has a high bandwidth far away from standard radio waves which enables strong communication in highly congested areas.

We developed a small scale, low-cost LiFi system to demonstrate a proof of concept of LiFi that grants the user full access to the internet. …

Enhancing Direction Finding Accuracy In Perturbed Digital Arrays Via Rf Ranging-Based Self Calibration, Ariel Freiman

Master's Theses

Direction finding with radio-frequency (RF) waves have numerous applications in radio navigation, wireless localization, emergency aid, and air traffic control, among others. Direction-finding using digital arrays outperforms traditional analog techniques but requires precise knowledge of the location of the array elements to obtain accurate results. Array perturbations can lead to algorithm failures and false detection, compromising direction-finding capabilities.

This research proposes implementing a Matched Filter - Least Square (MF-LS) algorithm for Two-Way Ranging (TWR) to enhance direction-finding accuracy in arrays with perturbed element locations. The MF-LS algorithm leverages the properties of matched filters to accurately determine element positions by measuring …

Shuffled Faster Than Nyquist Signaling For Spectrally Efficient And Secure Wireless Communication, John Gharib

Master's Theses

This thesis investigates the implementation and performance of Shuffled Faster than Nyquist (SFTN) signaling, a communication method that enhances spectral efficiency and provides physical layer security (PLS) in wireless communications. In Faster than Nyquist signaling, the Nyquist inter-symbol interference (ISI) criterion is exceeded, thereby increasing spectral efficiency. By varying the transmission rate of symbols above the Nyquist rate, SFTN signaling is able to obfuscate the timing of transmitted symbols with ISI. The work in this thesis evaluates the performance of SFTN in Additive White Gaussian Noise (AWGN) channels and the MATLAB 802.11ax fading channels. Results show that while SFTN signaling …

Plc Course Development, Leonard Hernandez, Jacqueline Grace Radding

Electrical Engineering

The goal of this project is to design and construct the first lab experiment for the newly developed EE435 laboratory course. The experiment entails PLC programming to automate LED lighting in a simulated building. Starting with why PLCs are used, how to use the interface of EcoStruxure Control Expert V15.0 and practice using logic to control the dimming of a Light Emitting Diode (LED) to sustain a certain number of lumens consistent in a zone. Through the lab manual developed in this project, students will gain experience of creating logic designs using Function Block Diagram (FBD) and learn the layout …

Electronic Note-String Detector, Gavin Garcia-Rossi, Tommy Smail

Electrical Engineering

As the virtual space has become a dominant part of everyone’s day-to-day lives, many normal face-to-face interactions and services have not yet been facilitated by adapting technology. One of these prevailing areas is music lessons. Over Zoom meetings, or other virtual platforms, it is tremendously challenging to teach students. These challenges include recognizing student mistakes audibly and visually, and being able to give confident feedback on the incorrect notes played by learning musicians. Without having to delve into improving the complex systems that would be required to improve audio, video, and connection quality of these connections, we have another solution …

Energy Storage And Communication System, Noah R. Johnson, Marc Wong

Electrical Engineering

The Industrial Power and Controls Lab in Engineering East is welcoming the addition of a new lab course, EE 435. Schneider Electric sponsors this course, which seeks to teach students how to use the Modicon M580 Program Logic Controller (PLC) in various industry use cases. This project is a continuation of previous senior projects and focuses on developing a lab experiment to teach students how to utilize the M580 in an energy storage use case. More specifically, it focuses on the battery management system that oversees the units and exposes students to the various situations this system may encounter during …

Variable Frequency Motor Drive Application, Jason G. Milne, Nick Mark

Electrical Engineering

This project entails the development of an electrical engineering undergraduate lab module focusing on utilizing a variable frequency drive (VFD) controlled with a programmable logic controller (PLC) — the Modicon M580. The variable frequency drive is a device that is able to automatically change the frequency of an object through automation without having to physically change the device that is being controlled (ex: fans, pumps, motors, etc.). This project will guide students to understand the software for programming and controlling the PLC within a 3 hour laboratory experiment. Throughout the lab, the students will learn how to implement the PLC …

Emulating The Doppler-Shift For Lora Based Low Earth Orbit Satellite Communication, Ariel Freiman, John Stephen Gharib

Electrical Engineering

This project investigates the adverse effects of the Doppler Shift on a LoRa waveform transmitted from a Low Earth Orbit Satellite or LEOSAT. This work is on behalf of Project OWL, who will use these results to justify further investment into developing a LEOSAT for their communication network. Part of the project is to design a test setup to replicate the Doppler Shift in the lab. The Doppler shift replication setup distorts the transmitted waveform, similar to how the signal gets distorted if sent from a LEOSAT. The test setup will comprise both software and hardware control, wherein software, the …

Instrumented Control Column For Optionally Piloted Aircraft, Andrew J. Klein

Electrical Engineering

Natilus, an aerospace company that is rapid-prototyping optionally piloted aircraft (OPA) for the shipping industry, needs a system that retrieves control column position data in order to manipulate flight simulator parameters in software. At present, a universally compatible system for all aircraft does not exist. Typically, established aerospace companies will sink significant time and money into developing proprietary systems for control column data retrieval as every aircraft is unique in its layout and linkage design. However, as a startup developing their first aircraft, Natilus does not have the privilege of modifying an existing sensor system to work with their HIL …

Tank Level Controller Plc Lab, Siddhi Upadhyaya, Teghvir Grewal

Electrical Engineering

The California Polytechnic State University San Luis Obispo’s Electrical Engineering Department is currently developing lab experiments for the new EE435 (Industrial Power Control and Automation) class. In order to support these efforts, fourth year Cal Poly students are expected to develop laboratory experiments that will be conducted during this new class for the semester system. The lab experiment focused on in this project is called the Tank Level Controller. This experiment will introduce EE 435 students to Schneider Electric Programmable Logic Controller (PLC) hardware and software, which is prominent in the automation industry.
This experiment will require students to develop …

Cybersecurity In Industrial Automation Lab Design For Ee 435, Jules Khalil Emile Hajjar, Emily Zhou

Electrical Engineering

This project involves the creation of an instructional laboratory aimed at teaching cybersecurity for industrial automation applications. Specifically tailored for Electrical Engineering students at Cal Poly, the experiment focuses on configuring the Modicon M580, a PLC from Schneider Electric, and serves to introduce students to relevant cybersecurity protocols and techniques. This project will be implemented into the EE435 (Industrial Power Control and Automation) course curriculum upon Cal Poly’s transition to the semester system.

Time-Domain Evaluation Of Atmospheric Ducting Effects On X-Band Propagation Over Water, Jack A. Gallegos

Master's Theses

The marine atmospheric boundary layer (MABL) is the region of atmosphere that interacts with the ocean surface. The atmospheric variability (i.e. temperature and relative humidity) in this region can result in rapid changes in the refractive index with increasing height from the sea surface. The complex region can result in non-standard propagation of electromagnetic (EM) waves beyond the horizon under atmospheric ducting conditions. However, when ducting layers are not present, EM waves are limited to line-of-sight transmission. Atmospheric ducting research is typically conducted using radio frequencies in the X-band (around 8-12 GHz) due to its impact on performance of marine …

Barrier Knockdown Test Control System For The Cal Poly Kinesiology Department, Regina M. Chapuis

Computer Engineering

The goal of this project is to design and implement a new control system for the LEDs and buttons on an existing Barrier Knockdown setup in the Cal Poly Kinesiology department. The Barrier Knockdown test is a testing apparatus in which subjects knock down a series of mechanical barriers in one of three patterns. The computer system times their reaction and movement time, and the test as a whole provides students with data to study the phenomenon of Contextual Interference. This system was previously controlled by an old computer setup that ultimately crashed. This project recreates the logic and user …

Hvac Hardware Modeling Using Programmable Automatic Controller, Panthil Ketan Patel, Lumanti Tuladhar

Electrical Engineering

The primary purpose of this project is to use the donated programmable logic controllers (PLC) from Schneider Electric to develop experiments for a future lab class at Cal Poly. Our goal as the first group working on this project is to develop an experiment where the PLC can control the HVAC system based on temperature and humidity sensors and user inputs to maintain a desired consistent temperature. The PLC will be controlled using Unity Pro XLS/Control Expert software for simulations. The overall purpose of the experiments will be to demonstrate the potential of the PLC to minimize manual intervention while …

Mars Prototype Rover Environmental Measurement System, James A. Renick

Computer Engineering

In my senior project, the problem I am trying to solve is how to efficiently design, create, and install an original library onto a Mars prototype rover operating system and to further use that library to integrate a new weather measurement sensor device into the rover system with the necessary software and hardware implementations. This is an important and highly valued problem as many aerospace and other engineering companies utilize rovers and other autonomous systems for important research, explorations, and reconnaissance missions and goals. In solving this problem, I utilized many resources that were available to me such as advisors, …

Developing A Miniature Smart Boat For Marine Research, Michael Isaac Eirinberg

Computer Engineering

This project examines the development of a smart boat which could serve as a possible marine research apparatus. The smart boat consists of a miniature vessel containing a low-cost microcontroller to live stream a camera feed, GPS telemetry, and compass data through its own WiFi access point. The smart boat also has the potential for autonomous navigation. My project captivated the interest of several members of California Polytechnic State University, San Luis Obispo’s (Cal Poly SLO) Marine Science Department faculty, who proposed a variety of fascinating and valuable smart boat applications.

Smart Bottle Ble Integration, Joshua M. Rizzolo

Electrical Engineering

In 1975, four percent of children aged five to nineteen were categorized as overweight or obese. As of 2016, this figure climbed above 18 percent [1]. Researchers at California Polytechnic State University San Luis Obispo (Cal Poly) want to investigate the effect of overeating in early childhood on later childhood obesity. This research requires collecting feeding pattern data on infants, which proves challenging. Parents cannot be relied on to regularly collect clean data due to factors including work schedule, multitasking, and general exhaustion. Thus, we have developed a tool to automatically collect data on feeding frequency and duration, as well …

X-Band Rf Transmitter Design For Multi-Purpose Small Satellite Communication Operations, Omer F. Gumus

Master's Theses

This thesis provides a description of the analysis, design, and tests of an X-band RF Transmitter communication system for small satellites. X-band transmitter systems are becoming popular in the upcoming deep space missions. Most of the deep-space ground stations have been using X-band frequencies to receive or transmit signals. The X-band (<10 GHz) can offer lower atmospheric losses and up to a couple of Mbps data rates for multiple satellite operations. Nowadays, many small satellites have been using frequency bands such as VHF, UHF, L, and S-band frequencies for communication. From deep space to the ground station, the low-frequency ranges are inadequate in providing Mbps level data rates and enough bandwidth for deep space missions.

The main focus of this thesis was the development of the subsystems such as gain block amplifier, Mixer, Bandpass Filter, and RF power amplifier. The subsystems were designed separately, then they were connected together to perform an end-to-end system test. One of the thesis aims is to design …

Indoor Positioning Using Synchronized Ultrasonic Ofdma Signals, Julian Bartolone

Master's Theses

This paper proposes a method of short-range indoor localization using differential phase measurements of synchronized two-tone ultrasonic signals in an Orthogonal Frequency Multiple Access (OFDMA) scheme. This indoor positioning system (IPS) operates at an ultrasonic frequency of approximately 40kHz and synchronizes using an infrared signal. The OFDMA scheme allows for a receiver to process the signals from multiple transmitters continuously without the signals interfering with each other. The phases of the signals are measured using Goertzel Filters, allowing for low-complexity frequency content analysis. A MATLAB simulation using the proposed localization method is performed using four transmitter nodes in the corners …

Survey And Design Of Microwave Low-Noise Amplifiers, Omri Yaari, Pavin Virdee

Electrical Engineering

This project is a contest entry in the Wide In-band Receiver area of the 2020 International Microwave Symposium, 5G Low Noise Amplifier Competition [1]. The project includes RF transistor selection, single, two-stage, and cascode models, and RF parameter optimization to maximize the IMS Competition figure of merit along with a supplemental figure of merit [2]. 5G technologies (used in cellphones, IoT, etc.), first introduced in 2018, are on the rise in current society. Fifth generation hardware requires extended capabilities in comparison to 4G (5-20MHz bandwidth EU: 0.6-2.6GHz), including the newly allocated sub 6GHz frequency bands (EU: 3.4-3.8GHz) and wider bandwidth …

Wildfire Early Detection System (Weds), Mason Mciver, Vincent Liang, Jeanreno Racines

Electrical Engineering

With climate change causing an increase in temperature over the past several decades, wildfires have been burning hotter and moving quicker leaving a trail of destruction in their path. Detecting a wildfire early allows firefighters to respond efficiently and effectively to ensure containment. With the rise of advanced computer vision and algorithms, autonomous systems can be used to monitor and report any fire activity. Having multiple devices spread out across a large area will allow first responders to map out the fire location and track the fire. By utilizing smart technologies, property damage can be minimized and residents living in …

Scalable Cognitive Radio Network Testbed In Real Time, Kevin Z. Yu

Master's Theses

Modern society places an increasingly high demand on data transmission. Much of that data transmission takes place through communication over the frequency spectrum. The channels on the spectrum are limited resources. Researchers realize that at certain times of day some channels are overloaded, while others are not being fully utilized. A spectrum management system may be beneficial to remedy this efficiency issue. One of the proposed systems, Cognitive Radio Network (CRN), has progressed over the years thanks to studies on a wide range of subjects, including geolocation, data throughput rate, and channel handoff selection algorithm, which provide fundamental support for …

An Exploratory Study Of Pulse Width And Delta Sigma Modulators, Logan B. Penrod

Master's Theses

This paper explores the noise shaping and noise producing qualities of Delta-Sigma Modulators (DSM) and Pulse-Width Modulators (PWM). DSM has long been dominant in the Delta Sigma Analog-to-Digital Converter (DSADC) as a noise-shaped quantizer and time discretizer, while PWM, with a similar self oscillating structure, has seen use in Class D Power Amplifiers, performing a similar function. It has been shown that the PWM in Class D Amplifiers outperforms the DSM [1], but could this advantage be used in DSADC use-cases? LTSpice simulation and printed circuit board implementation and test are used to present data on four variations of these …

Iot Camera System For Monitoring Strawberry Fields, Simon Schoennauer

Master's Theses

A wireless imaging system for monitoring strawberry fields provides enough quality image data for computer vision algorithms to make meaningful yield predictions. This report contains a design for a wireless sensor network modified with mesh networking techniques to extend coverage range and a solar energy harvesting system to improve sensor node lifetime. A two hop system with six nodes is implemented in a laboratory environment validating the communication systems integrity over an 800’ range. Moving from a primary battery system to solar energy harvesting increases the module lifetime indefinitely.

Simulation Of An Sp8t 18 Ghz Rf Switch Using Smt Pin Diodes, Andre De Souza Vigano

Master's Theses

Radio frequency (RF) and microwave switches are widely used in several different applications including radar, measurement systems, telecommunications, and other areas. An RF switch can control a radar’s transmit vs. receive mode, select the operating band, or direct an RF signal to different paths. In this study, a single pole eight throw (SP8T) switch using only Surface Mount (SMT) components is designed and simulated in Keysight’s Advanced Design System (ADS). Single pole eight throw is defined as one input and eight possible outputs. A star network configuration with series-shunt PIN diode switches is used to create the 8-way RF switch. …

Ofdm Simulation, Joseph W. Bednar

Electrical Engineering

The project objective is to provide a tool that will allow the user to simulate an adaptive OFDM (Orthogonal Frequency-Division Multiplexing) communication system in the presence of various types of interference and noise. The open-source code allows students and engineers to adjust the modulation, threshold settings, and distortion effects in the channel while observing the output bit error rate. The results the simulation provides will aid researchers in attempting to characterize the interference of OFDM based systems and their effectiveness in the presence of noise.