Systems and Communications Commons^™

Low Power Wide Area Networks (Lpwan): Technology Review And Experimental Study On Mobility Effect, Dhaval Patel

Electronic Theses and Dissertations

In the past decade, we have witnessed explosive growth in the number of low-power embedded and Internet-connected devices, reinforcing the new paradigm, Internet of Things (IoT). IoT devices like smartphones, home security systems, smart electric meters, garage parking indicators, etc., have penetrated deeply into our daily lives. These IoT devices are increasingly attached and operated in mobile objects like unmanned vehicles, trains, airplanes, etc. The low power wide area network (LPWAN), due to its long-range, low-power and low-cost communication capability, is actively considered by academia and industry as the future wireless communication standard for IoT. However, despite the increasing popularity …

Ball Oscillating Bouncer, Eric Blok, Daniel Altemese, Ryan Nowacki, Maram Qurban

Williams Honors College, Honors Research Projects

The purpose of this report is to document the need, objectives, marketing and engineering requirements, as well as validate the design of an autonomous control device capable of continuously bouncing a table tennis ball on a paddle. This includes the design of a self correcting system using lightweight materials, and as few sensors and components as possible to achieve a compact, portable design. To accomplish this, the system is designed to react to a ball falling from as short a distance as 10 centimeters above the paddle, meaning all sensor processing, control processing, and motor drives should be able to …

Coupling Radio Frequency Energy Via The Embedded Rebar Cage In A Reinforced Concrete Structure For The Purpose Of Concrete Degradation Sensing, Ryan Campiz

UNF Graduate Theses and Dissertations

This study focuses on utilizing an energy harvesting system in which a dedicated Radio Frequency (RF) power source transmits RF power via rebar in a reinforced concrete column. The RF power is received and decoupled by a receiver, and is then rectified, boosted, and stored as electrical energy in a supercapacitor, later to be used to make measurements, process data, and communicate to the source via rebar. Two design attempts are presented in this study: (a) one uses single line conduction at 2.4 GHz for RF power transfer; (b) the other uses a more conventional two-line conduction at 8.0 kHz …

Hardware Based Testing Of Communication Based Control For Dc Microgrid, Mahmoud Saleh, Yusef Esa, Ahmed Mohamed

Publications and Research

This paper further describes our work presented in Industry Application Society 2016 Conference, with more details related to the control and operation of the microgrid. The DC microgrid facility was custom designed and implemented at CCNY with minimal off-the-shelf components to enable flexibility and reconfiguration capability. The design steps, requirements, and experimental results of the developed testbed were discussed. As a case study, a central controller for energy management algorithm was developed and tested under several operational scenarios. The experimental results verify the applicability of the developed testbed for validating DC microgrid controllers.

Quantitative Analysis Of Regenerative Energy In Electric Rail Traction Systems, Mahmoud Saleh, Oindrilla Dutta, Yusef Esa, Ahmed Mohamed

Publications and Research

This paper aims at determining the influential factors affecting regenerative braking energy in DC rail transit systems. This has been achieved by quantitatively evaluating the dependence of regenerative energy on various parameters, such as vehicle dynamics, train scheduling, ground inclination and efficiency of the electrical devices. The recuperated power and energy have been presented by a mathematical model, comprising of a set of empirical forms, which allows for thorough analysis. A detailed simulation model of a typical DC-traction system has been developed to validate the developed empirical forms. The results verified the validity of the proposed mathematical model, and demonstrated …

Optimal Microgrids Placement In Electric Distribution Systems Using Complex Network Framework, Mahmoud Saleh, Yusef Esa, Nwabueze Onuorah, Ahmed Mohamed

Publications and Research

This paper provides a new approach to find the optimal location for Microgrids (MGs) in electric distribution systems using complex network analysis. An optimal location in this paper refers to a location that would result in increased grid resilience, reduced power losses, less line loading, higher voltage stability and secured supply to critical loads during power outage. The criteria used to find the optimal placement of MGs were based on the centrality analysis adopted from complex network theory, the center of mass concept used in physics, and the controlled delivery grid (CDG) concept. An IEEE 30-bus system was used as …

Energy Management Algorithm For Resilient Controlled Delivery Grids, Mahmoud Saleh, Yusef Esa, Ahmed Mohamed, Haim Grebel, Roberto Rojas-Cessa

Publications and Research

Resilience of the power grid is most challenged at power blackouts since the issues that led to it may not be fully resolved by the time the power is back. In this paper, a Real-Time Energy Management Algorithm (RTEMA) has been developed to increase the resilience of power systems based on the controlled delivery grid (CDG) concept. In a CDG, loads communicate with a central controller, periodically sending requests for power. The central controller runs an algorithm, based on which it may decide whether to grant the requested energy fully or partially. Therefore, the CDG limits loads discretionary access to …

Smart Grid Technology In The Developing World, Jacob R. Young

Honors Projects

A smart grid is the integration of communication and information technologies with contemporary power infrastructure to enhance load service and to incorporate continually evolving end-use applications. It is the latest advancement in the areas of power generation, transmission and distribution. It has advanced beyond the traditional grid structure at every stage; a smart grid is capable of incorporating distributed generation (DG) renewable sources and has improved transmission capabilities through implementation of technologies such as Flexible AC Transmission Systems (FACTS). Through the addition of control technology in the distribution network a smart grid is able to implement “self-healing” and other methods …

Applications Of Krylov Subspace And Balanced Truncation Model Order Reduction In Power Systems, Sebastian Emanuel Garrido

Graduate Theses and Dissertations

Dynamic representations of power systems usually result in the order of hundreds or even thousands of buses. Therefore, reduction of these dynamic representations is convenient. Two applications of model order reduction in power systems are discussed in this thesis. First, Krylov subspace-based method is applied to the IEEE-123 Node Test Feeder in the context of distribution-level power systems simulation. Second, a Balanced Truncation-based model reduction is implemented in the 3-Machine 9-Bus system for designing a power system controller in the context of generation- and transmission-level power systems.

First, for the IEEE-123 Node Test Feeder, a two-sided Arnoldi algorithm is proposed …

5g-Ucda Multi Antenna-To-Logical Cell Circular Fifo Mapping Strategy For High-Speed Train Wireless Communications, Subharthi Banerjee

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

2020 is the target year for the roll out of fifth generation wireless communication methodologies. The commercial vendors have characterized 5G as a collection of disruptive set of technologies to provide high throughput, low latency communication supporting a variety of services, i.e., machine to machine communication to next generation base stations and vehicle-to-vehicle communication to radio-over-fiber and high mobility channels. High-speed train wireless communication channels as a subset of high mobility channels have their clear advantages and disadvantages considering other vehicular channels. The speed of high-speed trains is going to reach 500km/hr and with Hyperloop it may reach 1000km/hr. LTE …

Centralized Control For Dc Microgrid Using Finite State Machine, Mahmoud Saleh, Yusef Esa, Ahmed Mohamed

Publications and Research

In this paper, an autonomous communication-based centralized control for DC microgrids (MG) has been developed and implemented. The proposed controller enables smooth transition between various operating modes. Finite state machine (FSM) has been used to mathematically describe the various operating modes (states), and events that may lead to mode changes (transitions). Therefore, the developed centralized controller aims at optimizing the performance of MG during all possible operational scenarios, while maintaining its reliability and stability. Results of selected cases have been presented. These results show stable transition between modes, verifying the validity and applicability of the proposed controller.

Data-Centric Situational Awareness And Management In Intelligent Power Systems, Xiaoxiao Dai

Electronic Theses and Dissertations

The rapid development of technology and society has made the current power system a much more complicated system than ever. The request for big data based situation awareness and management becomes urgent today. In this dissertation, to respond to the grand challenge, two data-centric power system situation awareness and management approaches are proposed to address the security problems in the transmission/distribution grids and social benefits augmentation problem at the distribution-customer lever, respectively.

To address the security problem in the transmission/distribution grids utilizing big data, the first approach provides a fault analysis solution based on characterization and analytics of the synchrophasor …

Development Of Microgrid Test Bed For Testing Energy Management System, Shaili Nepal

Electronic Theses and Dissertations

Today the world population has reached 7.5 billion, and this number is expected to grow at the rate of 1.13% every year [1]. With this increase in population, the total demand for electricity has also increased. More people means the need for more power: electricity to power homes, schools, industries, hospitals, and so on. In today’s world, where most of the daily activities are dependent on electricity, demand for electricity, therefore, continues to rise. Currently, managing this growing need for electricity is one of the challenges the world is facing. In addition to this, approximately 1.2 billion people live in …

Efficient Energy Optimization For Smart Grid And Smart Community, Avijit Das

Electronic Theses and Dissertations

The electric power industry has undergone significant changes in response to the environmental concerns during the past decades. Nowadays, due to the integration of different distributed energy systems in the smart grid, the balancing between power generation and load demand becomes a critical problem. Specifically, due to the intermittent nature of renewable energy sources (RESs) , power system optimization becomes significantly complicated. Due to the uncertain nature of RESs, the system may fail to ensure the power quality which may cause increased operating costs for committing costly reserve units or penalty costs for curtailing load demands. This dissertation presents three …

A Hybrid State/Event Driven Communication-Based Control For Dc Microgrids, Yusef Esa

Dissertations and Theses

The U.S. electric power industry is undergoing unprecedented changes triggered by the growing electricity demand, and the national efforts to reduce greenhouse gas emissions. Moreover, there is a call for increased power grid resiliency, survivability and self-healing capabilities. As a result of these challenges, the smart grid concept emerged. One of the main pillars of the smart grid is microgrids. In this thesis, the technical merits of clustering multiple microgrids during blackouts on the overall stability and supply availability have been investigated.

We propose to use the existing underground distribution grid infrastructure, if applicable, during blackouts to form microgrid clusters. …

Single Carrier Frequency Domain Equalization And Energy Efficiency Optimization For Mimo Cognitive Radio., Xiaohui Zhang

Electronic Theses and Dissertations

This dissertation studies two separate topics in wireless communication systems. One topic focuses on the Single Carrier Frequency Domain Equalization (SC-FDE), which is a promising technique to mitigate the multipath effect in the broadband wireless communication. Another topic targets on the energy efficiency optimization in a multiple input multiple output (MIMO) cognitive radio network. For SC-FDE, the conventional linear receivers suffer from the noise amplification in deep fading channel. To overcome this, a fractional spaced frequency domain (FSFD) receiver based on frequency domain oversampling (FDO) is proposed for SC-FDE to improve the performance of the linear receiver under deep fading …

Design And Implementation Of Ccny Dc Microgrid Testbed, Mahmoud Saleh, Yusef Esa, Yassine Mhandi, Werner Brandauer, Ahmed Mohamed

Publications and Research

This paper presents the design, control, energy management, and implementation of the City College of New York (CCNY) direct current (DC) microgrid laboratory testbed. This facility was custom designed and implemented by researchers at CCNY with minimal off-the-shelf components to enable significant flexibility and reconfiguration capability. The microgrid consists of renewable energy resources, energy storage system and controllable loads, and can operate in either a grid-connected or an islanded mode. The design steps, requirements, and results of the developed testbed were discussed. Moreover, several operational scenarios were tested. The experimental results verify the applicability and flexibility of the developed microgrid …

Wireless Mesh Networks For Scada Systems, Zachary Weisman

Computer Engineering

No abstract provided.

Impact Of Clustering Microgrids On Their Stability And Resilience During Blackouts, Mahmoud S. Saleh, Ammar Althaibani, Yusef Esa, Yassine Mhandi, Ahmed Mohamed

Publications and Research

In this paper, the impact of clustering multiple microgrids during blackouts, on their stability and supply availability, will be investigated. Microgrids have the capability of satisfying their emergency loads during blackouts. However, distributed energy resources (DERs)-dominated microgrids are affected by the uncertainty of their input energy supply, e.g. impact of solar irradiance on photovoltaic (PV) output. Moreover, an individual islanded microgrid is prone to instability issues due to large sudden load/generation changes. In order to increase the supply security, and enhance system stability, we propose to use the existing distribution grid infrastructure, if applicable, during blackouts to form microgrid clusters. …

The Electric Reel For Soccer Fields, Stephen Taylor

Electrical Engineering

Painting a soccer field consumes too much time. The process of reeling the string after laying out string along the field needs to improve. As a result, my project addresses improvements in how the workers retrieve the string through the production of an electric reel. This electric reel allows the worker to have control of the speed, direction, and on/off state of the device. Direction control allows the user ability to reel and unwind the string. Variable speed allows the user to control how fast the reel unwinds and reels the string. The device gathers string in an orderly manner …

Energy Harvesting And Storage: The Catalyst To The Power Constraint For Leveraging Internet Of Things (Iot) On Trains, Kelechi Nwogu

Department of Computer Electronics and Engineering: Dissertations, Theses, and Student Research

The success of Wireless Sensor Networks is heavily constrained by its reliance on storage technology like batteries, which are a finite resource. Whilst the number of transistors in an IC doubles every 18 months, the energy density of batteries is relatively flat during the same time period. This is a key challenge in leveraging the Internet of Things on trains.

The gravity of this problem is increased by an order of magnitude when the network is to be scaled up to hundreds or thousands of nodes. Comprehensive research and development efforts have been devoted to building ultra-low power sensors. These …

Comparing The Efficiency Of Heterogeneous And Homogeneous Data Center Workloads, Brandon Kimmons

College of Graduate Studies: Theses & Dissertations

Abstract

Information Technology, as an industry, is growing very quickly to keep pace with increased data storage and computing needs. Data growth, if not planned or managed correctly, can have larger efficiency implications on your data center as a whole. The long term reduction in efficiency will increase costs over time and increase operational overhead. Similarly, increases in processor efficiency have led to increased system density in data centers. This can increase cost and operational overhead in your data center infrastructure.

This paper proposes the idea that balanced data center workloads are more efficient in comparison to similar levels of …

Design Improvement For The Smart Dc Wall Plug, Cory Yee, Haoyan Huang

Electrical Engineering

The DC smart wall plug is a subsystem within the Cal Poly DC House Project. The previous version faces challenges supplying DC voltage to meet household appliances’ nominal values. Specifically, it can only output the minimum required voltage for DC appliances to operate, resulting in unwanted power loss. In addition, the maximum output voltage is rated at 15V, which is insufficient to power most DC appliances. This design improvement project incorporates NFC technology as a solution to overcome the power loss and a new buck converter configuration to increase the output voltage range. Additionally, the new design introduces short-circuit and …

Cnc Torch, Steven Chiu

Computer Engineering

This CNC Torch cuts steel plate. It can cut up to a maximum area of 3x3 feet. The user builds a cut list on the touchscreen from a selection of predefined shapes and enters the parameters need for each shape. When the user is ready, the cut list is sent to an Arduino that will move each motors accordingly to the shapes desired.

Intelligent Approaches For Modeling And Optimizing Hvac Systems, Iii Raymond Tesiero

Dissertations

Advanced energy management control systems (EMCS), or building automation systems (BAS), offer an excellent means of reducing energy consumption in heating, ventilating, and air conditioning (HVAC) systems while maintaining and improving indoor environmental conditions. This can be achieved through the use of computational intelligence and optimization. This research will evaluate model-based optimization processes (OP) for HVAC systems utilizing MATLAB, genetic algorithms and self-learning or self-tuning models (STM), which minimizes the error between measured and predicted performance data. The OP can be integrated into the EMCS to perform several intelligent functions achieving optimal system performance. The development of several self-learning HVAC …

Understanding Vehicular Traffic Behavior From Video: A Survey Of Unsupervised Approaches, Brendan Tran Morris, Mohan Manubhai Trivedi

Electrical & Computer Engineering Faculty Research

Recent emerging trends for automatic behavior analysis and understanding from infrastructure video are reviewed. Research has shifted from high-resolution estimation of vehicle state and instead, pushed machine learning approaches to extract meaningful patterns in aggregates in an unsupervised fashion. These patterns represent priors on observable motion, which can be utilized to describe a scene, answer behavior questions such as where is a vehicle going, how many vehicles are performing the same action, and to detect an abnormal event. The review focuses on two main methods for scene description, trajectory clustering and topic modeling. Example applications that utilize the behavioral modeling …

Design Of An Energy Efficient Virtual End Node Client Using Openadr2.0a And Smap, Kevin Navero

BioResource and Agricultural Engineering

Demand Response (DR) describes the set of actions taken to impose a reduction in electrical loads to stabilize the power grid and decrease costs. It is used when power grid emergencies or extremely high demand and congestion, threaten the electricity supply-demand balance. Automated Demand Response (ADR) describes a web-based control system that triggers DR events automatically by signaling other pre-programmed control systems. This project intends to use the OpenADR2.0 specifications provided by the OpenADR Alliance to construct an open source Virtual End Node (VEN) client to retrieve DR signals. The Simple Measurement and Actuation Profile (sMAP) software is also used …

Impact Of Primary User Activity On The Performance Of Energy-Based Spectrum Sensing In Cognitive Radio Systems, Sara L. Macdonald

Electrical & Computer Engineering Theses & Dissertations

Increasing numbers of wireless devices and mobile data requirements have led to a spectrum shortage. However spectrum utilization percentages are often low due to the current static spectrum allocation process where primary users (PUs) are given exclusive use to spectrum. Several mechanisms to increase spectrum utilization have been proposed including opportunistic spectrum access (OSA). Cognitive Radio (CR) is an emerging concept in wireless communication systems that aims to enable OSA in licensed frequencies by secondary users (SUs). CR systems are expected to sense the spectrum in order to determine if the PU is transmitting. Therefore OSA performance relies on the …

Tunable Fano Resonances Based On Two-Beam Interference In Microring Resonator, Ting Hu, Ping Yu, Chen Qui, Huiye Qui, Fan Wang, Mei Yang, Xiaoqing Jiang, Hui Yu, Jianyi Yang

Electrical & Computer Engineering Faculty Research

In this paper, a resonant system is demonstrated on silicon-on-insulator wafer to achieve tunable Fano resonances. In this system, the Fano resonance originates from the interference of two beams resonant in the microring resonator. The shapes of the Fano resonances are tunable through controlling the phase difference of the two beams. Both large slope and high extinctionratio (ER) are obtained when the phase difference is 0.5π or 1.5π. Experimental results show that Fano resonances with steep slope and ER over 20 dB are achieved in the whole free spectral range by controlling the microheaters to meet the phase condition.

Estimation Of Performance Indices For The Planning Of Sustainable Transportation Systems, Alexander Paz, Pankaj Maheshwari

Electrical & Computer Engineering Faculty Research

In the context of sustainable transportation systems, previous studies have either focused only on the transportation systemor have not used a methodology that enables the treatment of incomplete, vague, and qualitative information associated with the available data. This study proposes a system of systems (SOS) and a fuzzy logic modeling approach. The SOS includes the Transportation, Activity, and Environment systems. The fuzzy logic modeling approach enables the treatment of the vagueness associated with some of the relevant data. Performance Indices (PIs) are computed for each system using a number of performance measures. The PIs illustrate the aggregated performance of each …