Systems and Communications Commons^™

Fair Fault-Tolerant Approach For Access Point Failures In Networked Control System Greenhouses, Mohammed Ali Yaslam Ba Humaish

Theses and Dissertations

Greenhouse Networked Control Systems (NCS) are popular applications in modern agriculture due to their ability to monitor and control various environmental factors that can affect crop growth and quality. However, designing and operating a greenhouse in the context of NCS could be challenging due to the need for highly available and cost-efficient systems. This thesis presents a design methodology for greenhouse NCS that addresses these challenges, offering a framework to optimize crop productivity, minimize costs, and improve system availability and reliability. It contributes several innovations to the field of greenhouse NCS design. For example, it recommends using the 2.4GHz frequency …

Energy Harvesting For Residential Microgrid Distributed Sensor Systems, Devin C. Whalen

Master’s Theses

Microgrids are localized, independent power grids that can operate while connected to the larger electrical grid. These systems make intelligent decisions regarding power management and use an array of components to monitor power generation, consumption, and environmental conditions. While this technology can save end users money, the complexity of installation and maintenance has limited the adoption of microgrids in residential spaces. To simplify this technology for end users, the next evolution of microgrid components includes sensors that are wireless and ambiently powered.

Even with a microgrid installed, significant energy is wasted in residential spaces. To address this loss, energy harvesting …

Ism-Band Energy Harvesting Wireless Sensor Node, Fnu Naveed

Graduate Theses and Dissertations

In recent years, the interest in remote wireless sensor networks has grown significantly, particularly with the rapid advancements in Internet of Things (IoT) technology. These networks find diverse applications, from inventory tracking to environmental monitoring. In remote areas where grid access is unavailable, wireless sensors are commonly powered by batteries, which imposes a constraint on their lifespan. However, with the emergence of wireless energy harvesting technologies, there is a transformative potential in addressing the power challenges faced by these sensors. By harnessing energy from the surrounding environment, such as solar, thermal, vibrational, or RF sources, these sensors can potentially operate …

Poster: Round Trip Time Measurement Over Microgrid Power Network, Yasin Emir Kutlu, Ruairí De Fréin, Malabika Basu, Ali Malik

Conference papers

A focus of the Power Systems and Networking communities is the design and deployment of Microgrid (MG) integration systems that ensure that quality of service targets are met for load sharing systems at different endpoints. This paper presents an integrated Microgrid testbed that allows Microgrids endpoints to share their current, voltage and power values using a Network Published Shared Variable (NPSV) approach. We present Round Trip Time (RTT) measurements for time sensitive Microgrid control traffic in the presence of varying background traffic as an example quality of service measurement. Numerical results are presented using a range of different background traffic …

Crazyflie 2.1 Quadcopter Nonlinear System Identification, Nhat V. Nguyen, Hope Storro, John Plimpton

2023 Symposium

Quadcopters (quad) are used widely in many industries with crucial applications such as infrastructure inspection or package delivery. The Crazyflie 2.1 quad from Bitcraze provides an excellent platform for research and development. In this project, our goal is to perform system identification on the Crazyflie to propose a complete model. A gray box method is explored, which includes leveraging the parameters that are already known, to develop a set of equations. Through theory, simulations, and measurements, a complete quadcopter model is developed.

Integrated Dc Microgrid Testbed For Qos Evaluation, Yasin Emir Kutlu, Ruairí De Fréin, Malabika Basu, Ali Malik

Conference papers

This poster describes the development of an integrated Direct Current (DC) Microgrid (MG) testbed, consisting of power system and computer networking hardware, e.g. Cisco 4331 Integrated Services Routers (ISR) and 500W AC/DC power supplies, to test the Quality of Service (QoS) of MG control packets which are delivered over Layer-2 and Layer-3 networking topologies. It facilitates an examination of control packets between MG end-points, that enable real-time power load sharing, in the presence of background computer network traffic such as video streaming. The effects of difference levels of background traffic on the round trip time of control packets are demonstrated.

Tank Level Controller Plc Lab, Siddhi Upadhyaya, Teghvir Grewal

Electrical Engineering

The California Polytechnic State University San Luis Obispo’s Electrical Engineering Department is currently developing lab experiments for the new EE435 (Industrial Power Control and Automation) class. In order to support these efforts, fourth year Cal Poly students are expected to develop laboratory experiments that will be conducted during this new class for the semester system. The lab experiment focused on in this project is called the Tank Level Controller. This experiment will introduce EE 435 students to Schneider Electric Programmable Logic Controller (PLC) hardware and software, which is prominent in the automation industry.
This experiment will require students to develop …

Designing The Power System Of A Robot, Nolan Hays

Honors College Theses

This thesis outlines the acquired skills and knowledge acquired through the course of four years of Murray State University’s School of Engineering. The capstone for students in the department was to team up and complete an interdisciplinary senior design project using skills from various tracks of engineering. For this thesis, there is a greater emphasis on the electrical engineering track. The objective of the project was to build an autonomous robot to complete the various tasks within the scope of the IEEE SoutheastCon 2023 Hardware Competition. The robot was controlled via a Raspberry Pi 4 Model B. There were three …

Power Amplifier Based On Composite Injection-Voltaic Transistors, Nodira Batirdjanovna Alimova

Chemical Technology, Control and Management

The problem of high-current radio engineering devices is related to the fact that the use of high-power transistors and other semiconductor devices is limited by such a phenomenon as a secondary breakdown, in which there is a sharp decrease in the voltage on the device with simultaneous internal current lacing, and the device fails. To solve the problem of secondary breakdown, schemes have been proposed that operate stably at reverse voltage values 4-5 times higher than usual and at power dissipation 2-3 times higher than the maximum allowable power for an individual device. The problem is proposed to be solved …

Chatgpt As Metamorphosis Designer For The Future Of Artificial Intelligence (Ai): A Conceptual Investigation, Amarjit Kumar Singh (Library Assistant), Dr. Pankaj Mathur (Deputy Librarian)

Library Philosophy and Practice (e-journal)

Abstract

Purpose: The purpose of this research paper is to explore ChatGPT’s potential as an innovative designer tool for the future development of artificial intelligence. Specifically, this conceptual investigation aims to analyze ChatGPT’s capabilities as a tool for designing and developing near about human intelligent systems for futuristic used and developed in the field of Artificial Intelligence (AI). Also with the helps of this paper, researchers are analyzed the strengths and weaknesses of ChatGPT as a tool, and identify possible areas for improvement in its development and implementation. This investigation focused on the various features and functions of ChatGPT that …

Survey Of Routing Techniques-Based Optimization Of Energy Consumption In Sd-Dcn, Mohammed Nsaif, Gergely Kovásznai, Ali Malik, Ruairí De Fréin

Articles

The increasing power consumption of Data Center Networks (DCN) is becoming a major concern for network operators. The object of this paper is to provide a survey of state-of-the-art methods for reducing energy consumption via (1) enhanced scheduling and (2) enhanced aggregation of traffic flows using Software-Defined Networks (SDN), focusing on the advantages and disadvantages of these approaches. We tackle a gap in the literature for a review of SDN-based energy saving techniques and discuss the limitations of multi-controller solutions in terms of constraints on their performance. The main finding of this survey paper is that the two classes of …

Whiteboard Drawing Device, Stefan Ilic, Andrew Adams, Vaughn Richards, James Medved

Williams Honors College, Honors Research Projects

Whiteboards have become a staple in many classrooms, especially in the context of STEM courses. However, when it comes to teaching complex topics, it can be difficult or impractical to provide accurate drawings and visualizations by hand, and in extreme cases may lead to misinterpretation of a particular topic. To fix this issue, the Whiteboard Drawing Device allows users to draw preset shapes to a whiteboard automatically, both quickly and accurately. Using either a smartphone application or a set of onboard controls, the device allows users to automatically draw straight lines, rectangles, triangles, sinusoidal waves, and circles on the whiteboard. …

Wireless Environmental Weather Monitor, Joel Christie-Millett, Nathan Schroeder, Sylvester Wilson, Matthew Szijarto

Williams Honors College, Honors Research Projects

The goal of this senior design/honors project is to create a device that monitors environmental conditions in order to detect a wildfire. This device should notify a user of the status of the environment. The device should also last for 6 months without any human interaction. My role on the team is to design the power supply system that maximizes efficiency and uses renewable energy.

Continuity Of Formal Power Series Products In Nonlinear Control Theory, W. Steven Gray, Mathias Palmstrøm, Alexander Schmeding

Electrical & Computer Engineering Faculty Publications

Formal power series products appear in nonlinear control theory when systems modeled by Chen–Fliess series are interconnected to form new systems. In fields like adaptive control and learning systems, the coefficients of these formal power series are estimated sequentially with real-time data. The main goal is to prove the continuity and analyticity of such products with respect to several natural (locally convex) topologies on spaces of locally convergent formal power series in order to establish foundational properties behind these technologies. In addition, it is shown that a transformation group central to describing the output feedback connection is in fact an …

Load Modeling And Evaluation Of Leds For Hardware Test Bed Application, Jillian M. Ruff

Masters Theses

The lighting industry was revolutionized with the emergence of LED lighting. Over the last 15 years, LED lighting device sales and utilization have grown immensely. The growth and popularity of LEDs is due to improved operation of the device when compared to previous lighting technologies. Efficient performance of the device is critical due to the growth of global energy consumption.

As nonrenewable generation fuel is finite, utilities have begun the transition to renewable energy generation. Generation and distribution systems become inherently complex to comprehend and maintain with incorporation of emerging supply and load technologies. With the unprecedented growth of LED …

Improving The Programmability Of Networked Energy Systems, Noman Bashir

Doctoral Dissertations

Global warming and climate change have underscored the need for designing sustainable energy systems. Sustainable energy systems, e.g., smart grids, green data centers, differ from the traditional systems in significant ways and present unique challenges to system designers and operators. First, intermittent renewable energy resources power these systems, which break the notion of infinite, reliable, and controllable power supply. Second, these systems come in varying sizes, spanning over large geographical regions. The control of these dispersed and diverse systems raises scalability challenges. Third, the performance modeling and fault detection in sustainable energy systems is still an active research area. Finally, …

Developing A Miniature Smart Boat For Marine Research, Michael Isaac Eirinberg

Computer Engineering

This project examines the development of a smart boat which could serve as a possible marine research apparatus. The smart boat consists of a miniature vessel containing a low-cost microcontroller to live stream a camera feed, GPS telemetry, and compass data through its own WiFi access point. The smart boat also has the potential for autonomous navigation. My project captivated the interest of several members of California Polytechnic State University, San Luis Obispo’s (Cal Poly SLO) Marine Science Department faculty, who proposed a variety of fascinating and valuable smart boat applications.

Data-Enabled Distribution Grid Management, Zohreh Sadat Hosseini

Electronic Theses and Dissertations

In 2020, U.S. electric utilities installed more than 94 million advanced meters, which brought the percentage of residential customers equipped with smart meters to 75%. This significant investment allows collecting extensive customer data at the distribution level, however, the data are not currently leveraged effectively to help with system operations. This dissertation aims to use the smart meters’ data to improve the grid’s reliability, stability, and controllability by solving two of the most challenging problems at the distribution level, namely distribution network phase identification and outage identification.

Distribution networks have typically been the least observable and most dynamic and locally …

Power Decoupling Control And Optimization For A Photovoltaic Inverter In D-Q Rotation Frame, Zhaoxia Yang

All Graduate Theses, Dissertations, and Other Capstone Projects

In the past decade, solar energy, the fastest growing renewable energy, has been a growing interest in integration to the utility grid. Power electronics converters play important role in renewable energy integration, e.g., integrate the distributed photovoltaic (PV) panels to the grid. In many applications, particularly in the residential area, a single-phase rather than three-phase inverter is used to regulate the voltage from one form to the other while tracking the maximum power point of the PV system. The input voltage and current are DC and its maximum power is desired to be a constant value. However, in the single-phase …

Autonomous Wildfire Detection System, Matthew Pyle, Nick Garrett

Williams Honors College, Honors Research Projects

According to the National Fire Protection Association Journal, federal wildfire suppression costs in the United States have risen from an annual average of about $425 million from 1985 to 1999 up to $1.6 billion from 2000 to 2019. On average, more than 200,000 acres in the United States are burned per year due to wildfires, with more than 700,000 acres burned in 2020 alone. With the risk of wildfire ever rising, there is a need for better early detection of remote wildfires, as existing methods often include long delays like satellites or rely on human lookout towers. The objective is …

Smart Kettlebell, Cole Russell, Patrick Davis, Ryan Deboer, Isaac Stecker

Williams Honors College, Honors Research Projects

The purpose of design team 08’s senior design project is to create and implement a workout device that will be able to calculate the caloric expenditure, repetitions, and length of a workout. Once the duration of a workout is completed, the user metrics will be communicated from the kettlebell system to a user application via Bluetooth. The caloric expenditure will be used using the data that is provided from the accelerometer. The duration of the workout will be controlled using a push button that is connected to the kettlebell system that will allow for the start and stop of a …

Analysis Of Deep Learning Methods For Wired Ethernet Physical Layer Security Of Operational Technology, Lucas Torlay

All Theses

The cybersecurity of power systems is jeopardized by the threat of spoofing and man-in-the-middle style attacks due to a lack of physical layer device authentication techniques for operational technology (OT) communication networks. OT networks cannot support the active probing cybersecurity methods that are popular in information technology (IT) networks. Furthermore, both active and passive scanning techniques are susceptible to medium access control (MAC) address spoofing when operating at Layer 2 of the Open Systems Interconnection (OSI) model. This thesis aims to analyze the role of deep learning in passively authenticating Ethernet devices by their communication signals. This method operates at …

Grid Strength Assessment Trough Q-V Modal Analysis And Maximum Loadability Of A Wind-Dominated Power System Using P-Q Regions, Pierre Obed Dorile

Graduate Theses and Dissertations

Climate change is a menace to the existence of the world and policymakers are trying totackle this phenomenon by deploying large-scale wind farms into their grids. Among them, wind energy shows a promising future to substitute the traditional power plants. However, the deployment of these wind farms into the grid is not a panacea that does not pose any challenges to the grid operators. Keeping the power system voltage stable while considering the strength of the transmission grid is among the major challenges facing by the transmission system operators. Amid normal operation and fault conditions, wind farms should help the …

Wildfire Early Detection System (Weds), Mason Mciver, Vincent Liang, Jeanreno Racines

Electrical Engineering

With climate change causing an increase in temperature over the past several decades, wildfires have been burning hotter and moving quicker leaving a trail of destruction in their path. Detecting a wildfire early allows firefighters to respond efficiently and effectively to ensure containment. With the rise of advanced computer vision and algorithms, autonomous systems can be used to monitor and report any fire activity. Having multiple devices spread out across a large area will allow first responders to map out the fire location and track the fire. By utilizing smart technologies, property damage can be minimized and residents living in …

Design And Assembly Of High-Temperature Signal Conditioning System On Ltcc With Silicon Carbide Cmos Circuits, Sajib Roy

Graduate Theses and Dissertations

The objective of the work described in this dissertation paper is to develop a prototype electronic module on a low-temperature co-fired ceramic (LTCC) material. The electronic module would perform signal conditioning of sensor signals (thermocouples) operating under extreme conditions for applications like gas turbines to collect data on the health of the turbine blades during operation so that the turbines do not require shutdown for inspection to determine if maintenance is required. The collected data can indicate when such shutdowns, which cost $1M per day, should be scheduled and maintenance actually performed. The circuits for the signal conditioning system within …

Data Forgery Detection In Automatic Generation Control: Exploration Of Automated Parameter Generation And Low-Rate Attacks, Yatish R. Dubasi

Computer Science and Computer Engineering Undergraduate Honors Theses

Automatic Generation Control (AGC) is a key control system utilized in electric power systems. AGC uses frequency and tie-line power flow measurements to determine the Area Control Error (ACE). ACE is then used by the AGC to adjust power generation and maintain an acceptable power system frequency. Attackers might inject false frequency and/or tie-line power flow measurements to mislead AGC into falsely adjusting power generation, which can harm power system operations. Various data forgery detection models are studied in this thesis. First, to make the use of predictive detection models easier for users, we propose a method for automated generation …

The Use Of Supercapacitors To Stabilize The Power Supply System Of The Base Station Of Mobile Communication, Dilmurod Abdujalilovich Davronbekov, Utkir Karimovich Matyokubov

Scientific-technical journal

In this study, an analysis of the current status and available outages of the mobile communication base station power supply system was performed. The effects of these outages on the power supply system have been studied and it has been shown that batteries may not be an ideal solution as a backup source. Also, the issue of the introduction of renewable energy sources in the base station power supply system of the mobile communication system and its shortcomings are mentioned. In order to overcome these problems and stabilize the power changes in the battery auxiliary element and the power supply …

The Use Of Supercapacitors To Stabilize The Power Supply System Of The Base Station Of Mobile Communication, Dilmurod Abdujalilovich Davronbekov, Utkir Karimovich Matyokubov

Scientific-technical journal

In this study, an analysis of the current status and available outages of the mobile communication base station power supply system was performed. The effects of these outages on the power supply system have been studied and it has been shown that batteries may not be an ideal solution as a backup source. Also, the issue of the introduction of renewable energy sources in the base station power supply system of the mobile communication system and its shortcomings are mentioned. In order to overcome these problems and stabilize the power changes in the battery auxiliary element and the power supply …

Coordinated Control For Dc Energy Hubs Involving Ders, Evs, And Subway Systems, Rohama Ahmad

Dissertations and Theses

No abstract provided.

Hard Hat Ambient Liability Observer (Halo), Hunter Hykes, Nathan Kish, Brian Thomson

Williams Honors College, Honors Research Projects

Capturing workplace incident information is a growing area of concern for most companies. To assist with this, the design team proposed the H.A.L.O. This design uses time-of-flight sensors connected to LEDs to create a proximity-based hazard warning system. It also records incident data using an accelerometer and micro-SD card. This helps workers avoid some of the most common workplace injuries, slips, trips, and falls and accidental collisions.

Students have created a design with engineering, and marketing requirements that accomplish this task. The proposed design allows for this monitoring and mitigation systems to be attached to hard hats. Team members developed …