Systems and Communications Commons^™

Volume Holographic Optical Elements, Ching-Cherng Sun, Partha P. Banerjee

Electrical and Computer Engineering Faculty Publications

The final two papers are concerned with the analysis of novel holograms. Banerjee et al. investigate holographic recording and reconstruction for edge-lit holograms recorded in a 90-degree geometry. Various cases of recording and readout that incorporate propagational diffraction have been modeled. It is shown that the 90-degree geometry can result in beam shaping, as evidenced through preliminary experimental results with photorefractive lithium niobate. Nguyen et al. propose a new approach for designing computer-generated holograms. An artificial neural network is used to initiate the genetic algorithm so that the high computation cost of genetic algorithms for synthesizing holograms is significantly reduced …

Review Of The Product Development Process And Information Flow In The Manufacturing Industry: Problems And A Possible Wav Forward, E Opiyo

Tanzania Journal of Engineering and Technology (TJET)

No abstract provided.

A Fast And Simple Algorithm For Computing M-Shortest Paths In State Graph, M. Sherwood, Laxmi P. Gewali, Henry Selvaraj, Venkatesan Muthukumar

Electrical & Computer Engineering Faculty Research

We consider the problem of computing m shortest paths between a source node s and a target node t in a stage graph. Polynomial time algorithms known to solve this problem use complicated data structures. This paper proposes a very simple algorithm for computing all m shortest paths in a stage graph efficiently. The proposed algorithm does not use any complicated data structure and can be implemented in a straightforward way by using only array data structure. This problem appears as a sub-problem for planning risk reduced multiple k-legged trajectories for aerial vehicles.

Comparative Analysis Of Bragg Fibers, Shangping Guo, Sacharia Albin, Robert S. Rogowski

Electrical & Computer Engineering Faculty Publications

In this paper, we compare three analysis methods for Bragg fibers, viz. the transfer matrix method, the asymptotic method and the Galerkin method. We also show that with minor modifications, the transfer matrix method is able to calculate exactly the leakage loss of Bragg fibers due to a finite number of H/L layers. This approach is more straightforward than the commonly used Chew’s method. It is shown that the asymptotic approximation condition should be satisfied in order to get accurate results. The TE and TM modes, and the band gap structures are analyzed using Galerkin method.

Examination Of Focused Beam Propagation Through A Finite Non-Reciprocal Planar Chiral Slab Using Complex Fresnel Coefficients And Dual Transforms, Monish Ranjan Chatterjee, Sumit Nema, Partha P. Banerjee

Electrical and Computer Engineering Faculty Publications

Recently, uniform plane wave propagation across a nonchiral-chiral interface was examined via the development of appropriate Fresnel coefficients. In this extension, propagation of focused uniform and profiled beams through a finite, planar nonreciprocal chiral slab is investigated using complex Fresnel coefficients via angular plane wave decomposition and dual transforms.

Revisiting The Fresnel Coefficients For Uniform Plane Wave Propagation Across A Nonchiral, Reciprocal And Chiral, Nonreciprocal Interface, Monish Ranjan Chatterjee, Sumit Nema

Electrical and Computer Engineering Faculty Publications

The problem of EM wave propagation in non-reciprocal chiral media has been studied by several investigators. In a recent approach, a dual-transform technique has been developed to study the problem of such propagation under paraxial and slow-envelope variation conditions.

In this paper, we first outline some of the results obtained using the dual transform technique for arbitrary boundary conditions within the left boundary of a semi-infinite, non-reciprocal chiral medium for a uniform plane wave, and a fundamental Gaussian-profiled beam. Next, we explore the problem of a uniform EM wave incident at an oblique angle at an interface between a reciprocal, …

Traffic Simulation Using Arena, Shanti Yelamanchi

Electrical & Computer Engineering Theses & Dissertations

Many traffic simulation tools exist for developing traffic simulations; these tools can be divided broadly into two categories — macro simulation tools and micro simulation tools. These two categories of simulation tools are directed at modeling the extremes of traffic systems: very large systems and very small systems. There is a class of intermediate-sized transportation networks for which neither category of simulation tools might perform adequately. Additionally these specialized traffic simulation tools have a high learning curve. For developing medium sized traffic simulations in a short period of time, one might choose to use a familiar general-purpose discrete event simulation …

Implementation Of A Si/Sic Hybrid Optically Controlled High-Power Switching Device, Prashant Bhadri, Kuntao Ye, Elena A. Guliants, Fred R. Beyette Jr.

Electrical and Computer Engineering Faculty Publications

The ever-increasing performance and economy of operation requirements placed on commercial and military transport aircraft are resulting in very complex systems. As a result, the use of fiber optic component technology has lead to high data throughput, immunity to EMI, reduced certification and maintenance costs and reduced weight features. In particular, in avionic systems, data integrity and high data rates are necessary for stable flight control. Fly-by-Light systems that use optical signals to actuate the flight control surfaces of an aircraft have been suggested as a solution to the EMI problem in avionic systems. Current fly-by-light systems are limited by …

Translation Of 'Balika Badhu: A Selected Anthology Of Bengali Short Stories', Monish Ranjan Chatterjee

Electrical and Computer Engineering Faculty Publications

This project, which began with the desire to render into English a rather long tale by Bimal Kar about five years ago, eventually grew into a considerably more extended compilation of Bengali short stories by 10 of the most well-known practitioners of that art since the heyday of Rabindranath Tagore. The collection is limited in many ways, not the least of which being that no woman writer has been included, and that it contains only a baker's dozen stories (if we count Bonophool's micro-stories collectively as one ) — a number pitifully small considering the vast and prolific field of …

A 0.5 Μm Thick Polysilicon Schottky Diode With Rectification Ratio Of 10^6, Elena A. Guliants, Chunhai Ji, Young J. Song, Wayne A. Anderson

Electrical and Computer Engineering Faculty Publications

Polycrystalline Si films, 0.5-mm thick, were obtained as a result of metal-induced growth by sputtering from a Si target on 25 nm thick Ni prelayers at 525 °C. Silicon grew heteroepitaxially on the NiSi2 layer formed due to the reaction between the sputtered Si atoms and Ni. Schottky diodes were fabricated on the Si films by deposition of a Schottky metal on the front surface of the film while Ni disilicide provided an intimate ohmic contact at the back. A Pd/n-Si diode using an n-Si film annealed for 2 h at 700 °C in forming gas demonstrated a rectification ratio …

Mobile Home Security With Gprs, Duy Nguyen

Theses : Honours

This thesis presents the results of an honours project on the development of a security system for use on mobile devices. Mobile Home Security (MHS) is a prototype system that aimed to fully investigate a potential use of the wireless high-speed technology General Packet Radio Service (GPRS) in transmitting video from a static location. This thesis Mobile Home Security with GPRS describes in detail the design and developmental stages for the system. The research focused on the sending of video from a security capture device over a high speed radio network. The first stage of the research involved the design …

Self-Assembly Of Spatially Separated Silicon Structures By Si Heteroepitaxy On Ni Disilicide, Elena A. Guliants, Chunhai Ji, Wayne A. Anderson

Electrical and Computer Engineering Faculty Publications

A nonlithographic approach to produce self-assembled spatially separated Si structures for nanoelectronic applications was developed, employing the metal-induced silicon growth. Densely packed Si whiskers, 500–800 nm thick and up to 2500 nm long, were obtained by magnetron sputtering of Si on a 25 nm thick Ni prelayer at 575 °C. The nucleation of the NiSi2 compound at the Ni–Si interface followed by the Si heteroepitaxy on the lattice-matched NiSi2 is suggested to be the driving force for the whisker formation.

Real-Time Travel Time Estimation Using Macroscopic Traffic Flow Models, Pushkin Kachroo, Kaan Ozbay, Antoine G. Hobeika

Electrical & Computer Engineering Faculty Research

This paper presents the estimation of travel time on highways based on macroscopic modelling. The focus is on real-time values as compared to average or static values. The macroscopic models are used for distributed and time/space lumped settings and corresponding travel time estimation functions and algorithms are developed. The implications of these algorithms for the implementation of various incident management and traffic control strategies are also discussed.

Feedback Correction Of Angular Error In Grating Readout, Monish Ranjan Chatterjee, Sundaram Ramachandran

Electrical and Computer Engineering Faculty Publications

Angular and wavelength READ beam errors in holographic interconnection systems are often a recurrent problem. Several strategies have been proposed to minimize or eliminate such READOUT misalignments.

Some years ago, Chatterjee and co-workers proposed a method involving READ beam wavelength tuning to correct output angular errors. In this paper, we investigate the possibility of using an acousto-optic (A-O) Bragg cell with optoelectronic feedback to dynamically correct the scattered beam for deviations in the incidence direction of the READ beam of a hologram. The concept here is based on an acoustic frequency feedback strategy used recently by Balakshy and Kazaryan for …

Overview Of Acousto-Optic Bistability, Chaos, And Logical Applications, Monish Ranjan Chatterjee, Erol Sonmez

Electrical and Computer Engineering Faculty Publications

An overview is presented of the key results in the field of acousto-optic bistability in the past two decades. It is shown that the basic acousto-optic bistable device may be described as a nonlinear dynamical system which satisfies a quadratic map. Thereafter, details are presented of several analytical methods, computer modeling approaches, including the SPICE circuit modeling technique, and experiments that have been used to understand the phenomenon.

Extensions to logical and digital applications are also discussed.

Study Of Dynamics And Mechanism Of Metal-Induced Silicon Growth, Elena A. Guliants, Wayne A. Anderson

Electrical and Computer Engineering Faculty Publications

The present study addresses the mechanism of metal-induced growth of device-quality silicon thin films. Si deposition was performed by magnetron sputtering on a 25-nm-thick Ni prelayer at 525–625 °C and yielded a continuous, highly crystalline film with a columnar structure. A Ni disilicide intermediate layer formed as a result of the Ni reaction with Si deposit provides a sufficient site for the Si epitaxial growth because lattice mismatch is small between the two materials. The reaction between Ni and Si was observed to progress in several stages. The NixSiy phase evolution in a Ni:Si layer was studied by x-ray photoelectron …

Atm Lane Simulator, Kim Joo Ching

Student Works (2000-2009)

This project describes the development of ATM Local Area Network Emulation (LANE) simulator components. In LANE, an A TM network is configured to simulate an Ethernet or token ring network and coexist with the legacy network without making any modification to Them.The development of this simulator incorporates several important features. The most important feature of the simulator is that it is build based on object-oriented approach, which is able to provide the benefits of re usability, flexibility and extensibility. The second important feature is that it supports multi threaded operations. This means that every object able to act simultaneously. Besides …

Development Of Object-Oriented Components For Atm Network Simulation With Emphasis On Congestion Control, Wai Kit Sin

Student Works (2000-2009)

Asynchronous Transfer Mode (ATM) is a very high-speed transmission technology. The barrage of technological advancements has continuously enhanced the network performance. There is an increasing dependence on the network. Thus, there is a need to accurately predict the impact of network and applications changes in the dynamic network environment. The network simulator is a tool to analyze the behavior of ATM networks without the expense of building a real network. The simulation of this simulator will give the results that imitate the real network environment. The aim of this project is to develop object-oriented components for an ATM Network Simulator …

Isolated Ramp Metering Feedback Control Utilizing Mixed Sensitivity For Desired Mainline Density And The Ramp Queues, Pushkin Kachroo, Kaan Ozbay, Donald E. Grove

Electrical & Computer Engineering Faculty Research

This paper presents a feedback control design for isolated ramp metering control. This feedback control design, unlike the existing isolated feedback ramp controllers, also takes into account the ramp queue length. Using a nonlinear H∞ control design methodology, we formulate the problem in the desired setting to be able to utilize the results of the methodology.

Dynamic Bandwidth Allocation Using Neural-Fuzzy In Atm Network, Yan Sing Chua

Student Works (2000-2009)

Dynamic bandwidth allocation is becoming one of the crucial issues in the design and research in the computer network. This is due to the continuous increasing demand of intensive applications that require more bandwidth while retaining higher quality. Dynamic bandwidth allocation utilises the current network state information to optimise the bandwidth distribution. The state information can be gathered through prediction using past data and measurement on current state. Agility and flexibility of dynamic bandwidth allocation using Neural-Fuzzy has the advantage that it can adapt to the state changes of the network. ATM network carries heterogeneous traffic and this causes the …

Rotation-Invariant Synthetic Discriminant Function Filter For Pattern Recognition, Vahid R. Riasati, Partha P. Banerjee, Mustafa A. G. Abushagur, Kenneth B. Howell

Electrical and Computer Engineering Faculty Publications

The ring synthetic discriminant function (RSDF) filter for rotation-invariant response is discussed for pattern recognition. This method uses one half of a slice of the Fourier transform of the object to generate the transfer function of the filter. This is accomplished by rotating the one half of a slice in the Fourier domain through 2π rad about the zero-frequency point of the Fourier plane. This filter has the advantage of always matching at least one half of a slice of the Fourier transform of any rotation of the image. An analytical discussion of the filter construction and correlation results are …

3d Outside Cell Interference Factor For An Air-Ground Cdma ‘Cellular’ System, David W. Matolak

Faculty Publications

We compute the outside-cell interference factor of a code-division multiple-access (CDMA) system for a three-dimensional (3-D) air-to-ground (AG) "cellular-like" network consisting of a set of uniformly distributed ground base stations and airborne mobile users. The CDMA capacity is roughly inversely proportional to the outside-cell interference factor. It is shown that for the nearly free-space propagation environment of these systems, the outside-cell interference factor can be larger than that for terrestrial propagation models (as expected) and depends approximately logarithmically upon both the cell height and cell radius.

Characterization Of Poly-Si Thin Films Deposited By Magnetron Sputtering Onto Ni Prelayers, Elena A. Guliants, Wayne A. Anderson

Electrical and Computer Engineering Faculty Publications

A method of producing a polycrystalline silicon thin film on a foreign substrate without subsequent annealing has been developed. Thermally evaporated 5–100 nm thick Nifilms served as prelayers for magnetron sputtered Si thin films. A continuous film was obtained as a result of metal induced growth of polysilicon during low temperature (below 600 °C) deposition. The film uniformity is promising for large area device applications. The influence of the Ni prelayer thickness on the grain size of thus obtained films was investigated. Atomic force microscopy and cross-sectional scanning electron microscopy studies revealed features in the 150–600 nm size range while …

Nonlinear Self-Organization In Photorefractive Materials, Partha P. Banerjee, Nickolai Kukhtarev, John O. Dimmock

Electrical and Computer Engineering Faculty Publications

This chapter discusses self-organization and its effects in optics. One of the most exciting and potentially useful areas of current research in optics involves the understanding and exploitation of self-organization in nonlinear optical systems. This self-organization may sometimes lead to the evolution of complex spatial patterns that can be regarded as the nonlinear eigenmodes of the system. Generation of these patterns is characteristically marked by the presence of intensity thresholds. In a nonlinear system with complicated temporal dynamics, it turns out that one cannot retain purity in spatial dimensionality. It is therefore equally important to investigate the dynamics of the …

New Free-Space Multistage Optical Interconnection Network And Its Matrix Theory, Fengguang Luo, Mingcui Cao, Anjun Wan, Jun Xu, Xinjun Zhou, Cong Deng

Electro-Optics and Photonics Faculty Publications

A new free-space multistage optical interconnection network which is called the Comega interconnection network is presented. It has the same topological construction for the cascade stages of the Comega interconnection. The concept of the left Comega and the right Comega interconnection networks are given to describe the whole Comega interconnection network. The matrix theory for the Comega interconnection network is presented. The route controlling of the Comega interconnection network is decided based on the matrix analysis. The node switching states in cascade stages of the 8 by 8 Comega interconnection network for the route selection are given. The data communications …

Application Of Vibrational Techniques In Determination Of Dynamic Properties Of Agricultural Products-State Of The Arton Of Vibrational Techniques In Determination Of Dynamic Properties Of Agricultural Products-State Of The Art, Silas Kajuna

Tanzania Journal of Engineering and Technology (TJET)

Vibration is one of the techniques employed in the determination of dynamic properties of fruits and vegetables. It entails generation of a mechanical or acoustic vibrational signal which is propagated through the flesh of the agricultural material. A transducer is either attached or held close to the specimen to monitor the propagation of the signal through the specimen. The manner in which the signal is transmitted through the material is analyzed, and the dynamic properties of the specimen which relate to its firmness or its internal being are derived. The technique has been around for the past 30 years or …

Optoelectronic Switching Network With 2d Optical Fiber Bundle Array I/O Access Device, Fengguang Luo, Mingcui Cao, Qiaoyan Hu, Anjun Wan, Jun Xu, Cong Deng, Yuan-Zhong Xu

Electro-Optics and Photonics Faculty Publications

An optoelectronic switching network with 2-D optical fiber bundle arrays I/O access device is presented in this paper. An optoelectronic recirculating Banyan network based on CMOS/SEED smart pixel device is used in this configuration. Thirty-two X two single-mode fiber bundle array and 32 X 2 multi- mode fiber bundle array are fabricated respectively based on the features of high density, high precision and array permutation of the CMOS/SEED optoelectronic integrated devices. The measuring results show that the center to center spacing between adjacent optical fibers in the same layer of the fiber array is 125 micrometer, and the spacing between …

Guest Editorial: Special Section On Acousto-Optic Devices And Optical Information Processing: Research And Developments, Partha P. Banerjee, Ting-Chung Poon

Electrical and Computer Engineering Faculty Publications

This guest editorial provides an overview of the topical area and an introduction to the articles featured in the special section.

Laser Beam Profile Deformation Effect During Bragg Acousto-Optic Interaction: A Non-Paraxial Approximation, Ray S. Huang, Chen-Wen Tarn, Partha P. Banerjee, Doungchin Cao

Electrical and Computer Engineering Faculty Publications

It is commonly known that the spatial profiles of the diffracted light beams during Bragg acousto-optic interaction are distorted due to the Bragg angle selection mechanism. All the conventional studies on this effect use the paraxial approximation. But this approximation should be amended when the incident angle of the light is large enough that the diffracted light waves do not propagate closely along the optic axis of the acousto-optic diffraction system. By using a spatial Fourier transform approach, we rigorously study the light beam profile deformation effect of the diffracted light during the Bragg acousto-optic interaction beyond the paraxial approximation. …

Examination Of Beam Propagation In Misaligned Holographic Gratings And Comparison With The Acousto-Optic Transfer Function Model For Profiled Beams, Monish Ranjan Chatterjee, David D. Reagan

Electrical and Computer Engineering Faculty Publications

A transfer function formalism developed earlier for the propagation of profiled optical beams through acousto-optic Bragg cells is revisited and applied to a thick holographic grating. The results based on the holographic coupled wave model and the acousto-optic multiple scattering model are shown to be compatible, and equivalent parameters such as the Q and grating strength are defined for the two systems. Results for a Gaussian spatial profile are numerically computed and compared. For the holographic grating, a profiled beam may be interpreted as an angular misalignment or Bragg-angle mismatch problem. The case of Bragg-wavelength mismatch is also investigated for …