Signal Processing Commons^™

Adapting Deep Learning For Underwater Acoustic Communication Channel Modeling, Li Wei

Dissertations, Master's Theses and Master's Reports

The recent emerging applications of novel underwater systems lead to increasing demand for underwater acoustic (UWA) communication and networking techniques. However, due to the challenging UWA channel characteristics, conventional wireless techniques are rarely applicable to UWA communication and networking. The cognitive and software-defined communication and networking are considered promising architecture of a novel UWA system design. As an essential component of a cognitive communication system, the modeling and prediction of the UWA channel impulse response (CIR) with deep generative models are studied in this work.

Firstly, an underwater acoustic communication and networking testbed is developed for conducting various simulations and …

Effect Of Freestream Noise On Hypersonic Crossflow-Induced Boundary-Layer Transition, Andrew Bustard, Thomas J. Juliano, Harrison B. Yates, Mark Noftz, Joseph Jewell

Publications

Between the windward and leeward rays, boundary-layer transition on cones at angle of attack in hypersonic flow is dominated by the crossflow instability [1, 2], wherein stationary and/or traveling crossflow vortices develop and can breakdown into turbulence [3]. Stationary crossflow modes are caused by surface roughness or any other steady forcing and produce disturbances that are fixed in place on the surface [3–6]. Stationary vortices create a generalized inflection point in the velocity profile that is inviscidly unstable [7]. This distorted mean flow develops secondary instabilities, whose growth and breakdown is one path to turbulence [8–10]. Traveling crossflow modes are …

Autonomous Wildfire Detection System, Matthew Pyle, Nick Garrett

Williams Honors College, Honors Research Projects

According to the National Fire Protection Association Journal, federal wildfire suppression costs in the United States have risen from an annual average of about $425 million from 1985 to 1999 up to $1.6 billion from 2000 to 2019. On average, more than 200,000 acres in the United States are burned per year due to wildfires, with more than 700,000 acres burned in 2020 alone. With the risk of wildfire ever rising, there is a need for better early detection of remote wildfires, as existing methods often include long delays like satellites or rely on human lookout towers. The objective is …

Smart Kettlebell, Cole Russell, Patrick Davis, Ryan Deboer, Isaac Stecker

Williams Honors College, Honors Research Projects

The purpose of design team 08’s senior design project is to create and implement a workout device that will be able to calculate the caloric expenditure, repetitions, and length of a workout. Once the duration of a workout is completed, the user metrics will be communicated from the kettlebell system to a user application via Bluetooth. The caloric expenditure will be used using the data that is provided from the accelerometer. The duration of the workout will be controlled using a push button that is connected to the kettlebell system that will allow for the start and stop of a …

Design Project: 3d Printer/Injection Molder Hybrid, Lee Paolucci, Luke Everhart, Brandon Leap, Karson Lorey

Williams Honors College, Honors Research Projects

In the realm of rapid, small-scale prototyping, there are a few main factors that drive decisions to invest resources in technology to make that prototyping possible. Cost and ease of use are two of the most influential when looking at most SMEs (Small to Medium-sized Enterprises). The U.S. Small Business Administration defines an SME as smaller than 1,250 employees. According to An Assessment of Implementation of Entry-Level 3D Printers from the Perspective of Small Businesses, 59% of small manufacturers had implemented 3D printers as of 2014. However, no matter what technology is used in rapid prototyping, there are common …

Identifying Code Reading Strategies In Debugging Using Sta With A Tolerance Algorithm, Christine Lourrine S. Tablatin, Ma. Mercedes T. Rodrigo

Department of Information Systems & Computer Science Faculty Publications

The purpose of this study was to identify the common code reading strategies of the high and low performing students engaged in a debugging task. Using Scanpath Trend Analysis (STA) with a tolerance on eye tracking data, common scanpaths of high and low performing students were generated. The common scanpaths revealed differences in the code reading patterns and code reading strategies of high and low performing students. High performing students follow a bottom-up code reading strategy when debugging complex programs with logical and semantic errors. A top-down code reading strategy is employed when debugging programs with simple control structures, few …

Synthesizing Dysarthric Speech Using Multi-Speaker Tts For Dsyarthric Speech Recognition, Mohammad Soleymanpour

Theses and Dissertations--Electrical and Computer Engineering

Dysarthria is a motor speech disorder often characterized by reduced speech intelligibility through slow, uncoordinated control of speech production muscles. Automatic Speech recognition (ASR) systems may help dysarthric talkers communicate more effectively. However, robust dysarthria-specific ASR requires a significant amount of training speech is required, which is not readily available for dysarthric talkers.

In this dissertation, we investigate dysarthric speech augmentation and synthesis methods. To better understand differences in prosodic and acoustic characteristics of dysarthric spontaneous speech at varying severity levels, a comparative study between typical and dysarthric speech was conducted. These characteristics are important components for dysarthric speech modeling, …

A Tool For Biometric Interpretation Of Forensic Str Dna Profiles, Ahmad Jamal Baroudi

Graduate Theses, Dissertations, and Problem Reports (ETD)

Rapid DNA biometric identification applications are becoming more essential and widely used in human identity validation processes. Despite their powerful identification capabilities, processing a sample to generate a forensic DNA profile still takes longer compared with other rapid biometric technologies. Methods used to speed up the analysis could lead to signal artifacts similar to those arising from low copy or degraded DNA samples, making the electropherogram unsuitable for forensic interpretation and analysis. The goal of this research effort is to apply biometrics and mathematical approaches to forensic STR (Short Tandem Repeat) profiles. To accomplish this goal, a multi-function software tool …

Information Theoretical Analysis Of The Uniqueness Of Iris Biometrics, Katelyn M. Hampel

Graduate Theses, Dissertations, and Problem Reports (ETD)

With the rapid globalization of technology in the world, the need for a more reliable and secure online method of authentication is required. This can be achieved by using each individual’s distinctive biometric identifiers, such as the face, iris, fingerprint, palmprint, etc.; however, there is a bound to the uniqueness of each identifier and consequently, a limit to the capacity that a biometric recognition system can sustain before false matches occur. Therefore, knowing the limitations on the maximum population that a biometric modality can uniquely represent is essential now more than ever. In an effort to address the general problem, …

Generation Of High Performing Morph Datasets, Kelsey Lynn O'Haire

Graduate Theses, Dissertations, and Problem Reports (ETD)

Facial recognition systems play a vital role in our everyday lives. We rely on this technology from menial tasks to issues as vital as national security. While strides have been made over the past ten years to improve facial recognition systems, morphed face images are a viable threat to the reliability of these systems. Morphed images are generated by combining the face images of two subjects. The resulting morphed face shares the likeness of the contributing subjects, confusing both humans and face verification algorithms. This vulnerability has grave consequences for facial recognition systems used on international borders or for law …

Multimodal Adversarial Learning, Uche Osahor

Graduate Theses, Dissertations, and Problem Reports (ETD)

Deep Convolutional Neural Networks (DCNN) have proven to be an exceptional tool for object recognition, generative modelling, and multi-modal learning in various computer vision applications. However, recent findings have shown that such state-of-the-art models can be easily deceived by inserting slight imperceptible perturbations to key pixels in the input. A good target detection systems can accurately identify targets by localizing their coordinates on the input image of interest. This is ideally achieved by labeling each pixel in an image as a background or a potential target pixel. However, prior research still confirms that such state of the art targets models …

Inferential Statistics And Information Theoretical Measures: An Approach To Interference Detection In Radio Astronomy, Morgan R. Dameron

Graduate Theses, Dissertations, and Problem Reports (ETD)

In a time when technology is rapidly growing, radio observatories are now able to expand their computational power to achieve higher receiver sensitivity power and a more flexible realtime computing approach to probe the universe for its composition and study new astronomical phenomena. This allows searches to go deeper into the universe, and results in the recording of massive quantities of observed data. At the same time, this increases the amount of radio frequency interference (RFI) found in the obtained observatory data. The high power of RFI easily masks the low power of extraterrestrial signals, making them hard to detect …

An Analysis On Adversarial Machine Learning: Methods And Applications, Ali Dabouei

Graduate Theses, Dissertations, and Problem Reports (ETD)

Deep learning has witnessed astonishing advancement in the last decade and revolutionized many fields ranging from computer vision to natural language processing. A prominent field of research that enabled such achievements is adversarial learning, investigating the behavior and functionality of a learning model in presence of an adversary. Adversarial learning consists of two major trends. The first trend analyzes the susceptibility of machine learning models to manipulation in the decision-making process and aims to improve the robustness to such manipulations. The second trend exploits adversarial games between components of the model to enhance the learning process. This dissertation aims to …

Modeling, Fabrication, And Characterization Of Rf-Based Passive Wireless Sensors Composed Of Refractory Semiconducting Ceramics For High Temperature Applications, Kavin Sivaneri Varadharajan Idhaiam

Graduate Theses, Dissertations, and Problem Reports (ETD)

Real-time health monitoring of high temperature systems (>500^oC) in harsh environments is necessary to prevent catastrophic events caused by structural failures, varying pressure, and chemical reactions. Conventional solid-state temperature sensors such as resistance temperature detectors (RTDs) and thermocouples are restricted by their operating environments, sensor dimensions and often require external power sources for their operation. The current work presents the research and development of RF-based passive wireless sensing technology targeting high temperatures and harsh environmental conditions. Passive wireless devices are generally classified as near-field and far-field devices based on the interrogation distance. Near-field sensors are placed at …