Signal Processing Commons^™

Technique Design Of Filter On Surface-Acoustic Waves, Dilmurod Abdujalilovich Davronbekov, Zafar Tulyaganovich Khakimov

Acta of Turin Polytechnic University in Tashkent

The article describes the design of filters on surface acoustic waves (SAWs), which are selective elements and are widely used in blocks, devices and signal processing systems in telecommunications, including wireless communication systems such as cellular, trunking and others. Designs of filters for surfactants are considered, which are divided into two large groups - by functional purpose and by a systematic approach to the synthesis of performance characteristics of filters for surfactants. Optimization algorithms and methods for synthesizing surfactant filters have been developed and improved. An improved technique for the synthesis of a filter based on surface acoustic waves is …

Designing And Evaluating Of Mimo Systems For Millimeter-Wave Communications, Mojtaba Ahmadi Almasi

Boise State University Theses and Dissertations

The fifth generation (5G) of wireless communications will integrate all existing technologies while bringing its own to the system. Amongst these technologies, millimeter-wave (mmWave) is emerging as a promising solution for 5G systems. However, to fully harness the potential of mmWave communications, obstacles such as severe path loss, channel sparsity, and hardware complexity should be overcome. The existing cost-effective systems can considerably reduce the hardware complexity and partially severe path loss, while channel sparsity still remains a main problem. Other factors such as transmission reliability and coverage area should be considered in 5G mmWave communications. Non-orthogonal multiple access (NOMA) is …

An Exploratory Study Of Pulse Width And Delta Sigma Modulators, Logan B. Penrod

Master's Theses

This paper explores the noise shaping and noise producing qualities of Delta-Sigma Modulators (DSM) and Pulse-Width Modulators (PWM). DSM has long been dominant in the Delta Sigma Analog-to-Digital Converter (DSADC) as a noise-shaped quantizer and time discretizer, while PWM, with a similar self oscillating structure, has seen use in Class D Power Amplifiers, performing a similar function. It has been shown that the PWM in Class D Amplifiers outperforms the DSM [1], but could this advantage be used in DSADC use-cases? LTSpice simulation and printed circuit board implementation and test are used to present data on four variations of these …

Power-Weighted Lpc Formant Estimation, Ruairí De Fréin

Conference papers

A power-weighted formant frequency estimation procedure based on Linear Predictive Coding (LPC) is presented. It works by pre-emphasizing the dominant spectral components of an input signal, which allows a subsequent estimation step to extract formant frequencies with greater accuracy. The accuracy of traditional LPC formant estimation is improved by this new power-weighted formant estimator for different classes of synthetic signals and for speech. Power-weighted LPC significantly and reliably outperforms LPC and variants of LPC at the task of formant estimation using the VTR formants dataset, a database consisting of the Vocal Tract Resonance (VTR) frequency trajectories obtained by human experts …

The Role Of Network Components In Improving The Reliability And Survivability Of Mobile Communication Networks, Dilmurod Davronbekov, Utkir Karimovich Matyokubov

Acta of Turin Polytechnic University in Tashkent

This article compares the different architectures of mobile communication networks (MCN) and examines the survivability of the network. Typical survival strategies for improving MCN survivability, failure mitigation strategies for network elements, wireless network survival rates, failure scenarios at MCN levels, and survival indicators are presented. The importance of fiber-optic communication in the construction of communication lines between MCN components has been studied. The issue of designing MCNs in a cost-effective and highly viable way is considered, and the necessary expressions of the design process are given.

Electromagnetic Characteristics Of The Soil, Abdul Salam, Usman Raza

Faculty Publications

The electromagnetic characteristics of the soil are discussed in this chapter. The characteristics of porous bedrock, soil medium, and impacts of rain attenuations are also presented. The models of dielectric soil properties are studied with a rigorous focus on the constitutive parameters of subsurface soil medium. Moreover, the permittivity and wavenumber in soil are explained. In addition, the frequency-dependent dielectric properties such as dispersion in soil, absorption characteristic, and penetration depth versus frequency are reviewed. Furthermore, the effective permittivity of soil–water mixture for through-the soil-propagation mechanism is analyzed thoroughly.

Underground Phased Arrays And Beamforming Applications, Abdul Salam, Usman Raza

Faculty Publications

This chapter presents a framework for adaptive beamforming in underground communication. The wireless propagation is thoroughly analyzed to develop a model using the soil moisture as an input parameter to provide feedback mechanism while enhancing the system performance. The working of array element in the soil is analyzed. Moreover, the effect of soil texture and soil moisture on the resonant frequency and return loss is studied in detail. The wave refraction from the soil–air interface highly degrades the performance of the system. Furthermore, to beam steering is done to achieve high gain for lateral component improving the UG communication. The …

Signals In The Soil: An Introduction To Wireless Underground Communications, Abdul Salam, Usman Raza

Faculty Publications

In this chapter, wireless underground (UG) communications are introduced. A detailed overview of WUC is given. A comprehensive review of research challenges in WUC is presented. The evolution of underground wireless is also discussed. Moreover, different component of UG communications is wireless. The WUC system architecture is explained with a detailed discussion of the anatomy of an underground mote. The examples of UG wireless communication systems are explored. Furthermore, the differences of UG wireless and over-the-air wireless are debated. Different types of wireless underground channel (e.g., In-Soil, Soil-to-Air, and Air-to-Soil) are reported as well.

Modulation Schemes And Connectivity In Wireless Underground Channel, Abdul Salam, Usman Raza

Faculty Publications

In this chapter, a thorough treatment of the modulation schemes for UG Wireless is presented. The effects of soil texture and water content on the capacity of multi-carrier modulation in WUC are discussed. The multi-carrier capacity model results are analyzed. Moreover, the underground MIMO design for underground communications is explained thoroughly. An analysis of medium access in wireless underground is done as well. Furthermore, the soil properties are considered for cross-layer communications of UG wireless. The performance analysis of traditional modulation schemes is also considered. The soil moisture-based modulation approach is also explored in this chapter. The connectivity and diversity …

Current Advances In Internet Of Underground Things, Abdul Salam, Usman Raza

Faculty Publications

The latest developments in Internet of Underground Things are covered in this chapter. First, the IOUT Architecture is discussed followed by the explanation of the challenges being faced in this paradigm. Moreover, a comprehensive coverage of the different IOUT components is presented that includes communications, sensing, and system integration with the cloud. An in-depth coverage of the applications of the IOUT in various disciplines is also surveyed. These applications include areas such as decision agriculture, pipeline monitoring, border control, and oil wells.

Wireless Underground Channel Modeling, Abdul Salam, Usman Raza

Faculty Publications

A comprehensive treatment of wireless underground channel modeling is presented in this chapter. The impacts of the soil on bandwidth and path loss are analyzed. A mechanism for the UG channel sounding and multipath characteristics analysis is discussed. Moreover, novel time-domain impulse response model for WUC is reviewed with the explanation of model parameters and statistics. Furthermore, different types of the through-the-soil wireless communications are surveyed. Finally, the chapter concludes with discussion of the UG wireless statistical model and path loss model for through-the-soil wireless communications in decision agriculture. The model presented in this chapter is also validated with empirical …

Wideband Satcom Model: Evaluation Of Numerical Accuracy And Efficiency, Andrew J. Knisely, Andrew Terzuoli

Faculty Publications

The spectral method is typically applied as a simple and efficient method to solve the parabolic wave equation in phase screen scintillation models. The critical factors that can greatly affect the spectral method accuracy is the uniformity and smoothness of the input function. This paper observes these effects on the accuracy of the finite difference and the spectral methods applied to a wideband SATCOM signal propagation model simulated in the ultra-high frequency (UHF) band. The finite difference method uses local pointwise approximations to calculate a derivative. The spectral method uses global trigonometric interpolants that achieve remarkable accuracy for continuously differentiable …

Remedying Sound Source Separation Via Azimuth Discrimination And Re-Synthesis, Ruairí De Fréin

Conference papers

Commercially recorded music since the 1950s has been mixed down from many input sound sources to a two-channel reproduction of these sources. The effect of this approach is to assign sources to locations in a stereo field using a pan-position for each source. The Adress algorithm is a popular way of extracting individual music sound sources from a stereo mixture. A drawback of the Adress algorithm is that when time-frequency components in the stereo mixture are shared between two or more sources, calculating the inter-aural intensity scaling parameter for each source for that time-frequency component is challenging. We show how …

Distance Estimation Using Ofdm Signals For Ultrasonic Positioning, Kyman Huang

Master's Theses

This paper describes a method of estimating distance via Time-of-Flight (TOF) measurement using ultrasonic Orthogonal Frequency Division Multiplexing (OFDM) signals. Using OFDM signals allows the signals and their sub-carriers to remain orthogonal to each other while continuously transmitting. This estimation method is based on the change of phase of a traveling wave as it propagates through a medium (air for ultrasonic signals). By using signals containing multiple tones, the phase change between each frequency component is slightly different. This phase difference is dependent on the distance traveled and can thus be used to estimate distance. This paper studies the impact …

The Design, Testing, And Analysis Of A Constant Jammer For The Bluetooth Low Energy (Ble) Wireless Communication Protocol, Aiku Shintani

Master's Theses

The decreasing cost of web-enabled smart devices utilizing embedded processors, sensors, and wireless communication hardware have created an optimal ecosystem for the Internet of Things (IoT). IEEE802.15.4, IEEE802.11ah, WirelessHART, ZigBee Smart Energy, Bluetooth (BT), and Bluetooth Low Energy (BLE) are amongst the most commonly used wireless standards for IoT systems. Each of these standards has tradeoffs concerning power consumption, range of communication, network formation, security, reliability, and ease of implementation. The most widely used standards for IoT are Bluetooth, BLE, and Zigbee. This paper discusses the vulnerabilities in the implementation of the PHY and link layers of BLE. The link …

Indoor Positioning Using Acoustic Pseudo-Noise Based Time Difference Of Arrival, Nicholas J. Luong

Master's Theses

The Global Positioning System (GPS) provides good precision on a global scale, but is not suitable for indoor applications. Indoor positioning systems (IPS) aim to provide high precision position information in an indoor environment. IPS has huge market opportunity with a growing number of commercial and consumer applications especially as Internet of Things (IoT) develops. This paper studies an IPS approach using audible sound and pseudo-noise (PN) based time difference of arrival (TDoA). The system’s infrastructure consists of synchronized speakers. The object to be located, or receiver, extracts TDoA information and uses multilateration to calculate its position. The proposed IPS …

A Power Constrained 433-Mhz Low Noise Amplifier, Pablo Alvarez Arellano

Graduate Theses and Dissertations

Within wireless communication systems, low noise amplifiers are critical for the performance of receivers. They are primarily responsible for providing enough gain while adding little noise to overcome the noise of the subsequent stages. The LNA presented here is part of a battery-powered transceiver meant to measure crop nutrient data and relay the information. Therefore, power consumption and area become import considerations. To design for a specific power level, a power-constrained noise optimization method is used. The method sizes the amplifying transistor for a fixed source impedance, power dissipation, technology, and operating frequency. The chosen topology is the cascode stage …

Reinforcement Learning In Self Organizing Cellular Networks, Roohollah Amiri

Boise State University Theses and Dissertations

Self-organization is a key feature as cellular networks densify and become more heterogeneous, through the additional small cells such as pico and femtocells. Self- organizing networks (SONs) can perform self-configuration, self-optimization, and self-healing. These operations can cover basic tasks such as the configuration of a newly installed base station, resource management, and fault management in the network. In other words, SONs attempt to minimize human intervention where they use measurements from the network to minimize the cost of installation, configuration, and maintenance of the network. In fact, SONs aim to bring two main factors in play: intelligence and autonomous adaptability. …

Virtual Satcom, Long Range Broadband Digital Communications, Dennis George Watson

Electrical & Computer Engineering Theses & Dissertations

The current naval strategy is based on a distributed force, networked together with high-speed communications that enable operations as an intelligent, fast maneuvering force. Satellites, the existing network connector, are weak and vulnerable to attack. HF is an alternative, but it does not have the information throughput to meet the distributed warfighting need. The US Navy does not have a solution to reduce dependency on space-based communication systems while providing the warfighter with the required information speed.

Virtual SATCOM is a solution that can match satellite communications (SATCOM) data speed without the vulnerable satellite. It is wireless communication on a …

Improved Estimation For Saleh Model And Predistortion Of Power Amplifiers Using 1-Db Compression Point, Haider Al Kanan, Xianzhen Yang, Fu Li

Electrical and Computer Engineering Faculty Publications and Presentations

This paper proposes an improved estimation approach for modelling RF power amplifiers (PAs) using the Saleh behavioural model. The proposed approach is appropriate for solid-state PA technologies. The 1-dB compression point of the PA is included in the estimation approach to improve the estimation of the Saleh coefficients. Thus, expressions are derived to describe the relationship between the parameters of the Saleh model and the manufacturing specifications of PAs: gain (G), third-order intercept point (IP₃) and 1-dB compression point (P_1dB). This method is a simple estimation of a memoryless amplitude-to-amplitude (AM/AM) nonlinearity to benefit RF designers …

Coverage Guided Differential Adversarial Testing Of Deep Learning Systems, Jianmin Guo, Houbing Song, Yue Zhao, Yu Jiang

Publications

Deep learning is increasingly applied to safety-critical application domains such as autonomous cars and medical devices. It is of significant importance to ensure their reliability and robustness. In this paper, we propose DLFuzz, the coverage guided differential adversarial testing framework to guide deep learing systems exposing incorrect behaviors. DLFuzz keeps minutely mutating the input to maximize the neuron coverage and the prediction difference between the original input and the mutated input, without manual labeling effort or cross-referencing oracles from other systems with the same functionality. We also design multiple novel strategies for neuron selection to improve the neuron coverage. The …

Calibration To Mitigate Near-Field Antennas Effects For A Mimo Radar Imaging System, Ha Hoang, Matthias John, Patrick Mcevoy, Max Ammann

Articles

A calibration method for a high-resolution hybrid MIMO turntable radar imaging system is presented. A line of small metal spheres is employed as a test pattern in the calibration process to measure the position shift caused by undesired antenna effects. The unwanted effects in the antenna near-field responses are analysed, modelled and significantly mitigated based on the symmetry and differences in the responses of the MIMO configuration.

Development Of A Software-Defined Underwater Acoustic Communication System, Zijian Zhu

Dissertations, Master's Theses and Master's Reports

This report started with a brief history and recent development of underwater acoustic communication systems as well as software-defined radio technologies. Then, some challenges from underwater acoustic channels and available underwater acoustic communication modems are discussed. After finished introducing the basics of SDR and GNU Radio, a detailed description of implementing a software-defined acoustic communication system in GNU Radio are presented, along with some key concepts of the system.

Then, some hardware specifications are presented, following by detailed documentation on a software-defined acoustic communication system experiment with a host computer, a USRP, an acoustic hydrophone, and a hydrophone. At the …

Estimation Of Atmospheric Conditions Over A Long Horizontal Path Using Multi-Frame Blind Deconvolution (Mfbd) Techniques In Comparison With Delayed Tilt Anisoplanatism (Delta) Software, Hannah Stoll

Dissertations, Master's Theses and Master's Reports

The potential to track and view objects in space from the ground with greater near real time knowledge of the intervening turbulence would be a revolutionary capability. The objective of this thesis is to cross-validate two separate methods used to estimate the Fried parameter. This verification is a step toward a commercial grade product that would make real-time estimates of the turbulence strength along an optical path from a ground-based observatory to a satellite in orbit around the Earth. Michigan Technological University has developed a multi-frame blind deconvolution (MFBD) algorithm used to estimate r0 and it was tested against MZA’s …

Cognitive Resource Management In 5g Networks, Kelvin M. Franco-Argueta

OUR Journal: ODU Undergraduate Research Journal

The 4G LTE network offers a high speed connectivity that is predicated on the construction platform of the 3G network and relies on an Internet Protocol (IP) for data transmission and reception. This platform’s utility is quickly becoming exhausted as the frequency spectrum approaches maximum device connectivity capacity. To improve network capacity, we must expand the bandwidth that our devices operate on. To effectively carry out this task, a self-configurable network must be employed in the development of the 5g network. This article aims to explore the technologies which form the platform for the 5G network and the cognitive resource …

Levitate, Stephen Hargreaves, Isaac Hammonds, Russel Pease, Joseph Morris

Williams Honors College, Honors Research Projects

Levitate is designed to create a healthier work environment by providing a way of entertaining a worker while not distracting them. To fulfill this task, the device needs to be interesting and self-sufficient while not being overly flashy. To complete this task, Levitate is designed so that it is able to lift a platform from rest using magnetism and that will be able to stabilize itself using electromagnets. It initiates this process by lifting the permanent magnet using servo motors. Then, the device is able to achieve stability through the use of hall sensors feeding their results to the board …

Kettlebell Ultra, Elissa Peters, Kathryn Wegman, Daniel Basch, Mason Pastorius

Williams Honors College, Honors Research Projects

This project will consist of an attachment to an average kettlebell that will track the number of repetitions that the user has performed. The device will send this data over Bluetooth to a smart phone application so the user can track their workout accurately.

Digital, Automated Reactive Target System, Nicholas Haas, Saipranay Vellala, Trandon Ware, Thomas Martin

Williams Honors College, Honors Research Projects

In this era, technology is woven into almost every facet of our leisure activities. Although technology has innovated hobbies ranging from chess to soccer, the art of shooting has been neglected. Unnecessary insufficiency such as bullet ricochets off of mechanical steel targets, ineffective progress tracking, and general inaccessibility to outdoor training facilities are all improvable areas of this sport. The Dynamic Automated Reactive Target (D.A.R.T) System aims to fill some of these gaps and help modernize recreational marksmanship. Modeling the system after a dueling tree will optimize the use of the system and allow for different training models to challenge …

Anomalous Event Detection And Localization Based On Deep Generative Adversarial Networks For Surveillance Videos, Thittaporn Ganokratanaa

Chulalongkorn University Theses and Dissertations (Chula ETD)

Anomaly detection is of great significance for intelligent surveillance videos. Current works typically struggle with object detection and localization problems due to crowded scenes and lack of sufficient prior information of the objects of interest during training, resulting in false-positive detection results. Thus, in this thesis, we propose two novel frameworks for video anomaly detection and localization. We first propose a Deep Spatiotemporal Translation Network (DSTN), a novel unsupervised anomaly detection and localization method based on Generative Adversarial Network (GAN) and Edge Wrapping (EW). In this work, we introduce (i) a novel fusion of background removal and real optical flow …