Signal Processing Commons^™

Securing Distributed Energy Resources: A Dnp3 Master Station With Semantic Web Integration For Decentralized Der Data Sovereignty, Ethan J. Coffman

Electrical Engineering and Computer Science Undergraduate Honors Theses

As current electrical grids trend toward a heavier reliance on DERs, there is a growing need to secure DER communications while maintaining data sovereignty for device owners. Previously, work by Donna Thakadipuram established the foundation for a decentralized framework using Solid by implementing a prototype that used a Raspberry Pi and a DSP to simulate Modbus traffic and upload the data to a Solid server. This thesis extends her work to simulate multiple DERs using Typhoon HIL and communicate to each device over DNP3/TCP. The system uses a Python-based DNP3 master to collect telemetry from all 12 DERs before transforming …

Piezoelectric Actuator Driver System, Daniel Hoefer

Electrical Engineering

This work presents the design, fabrication, and testing of a high-voltage piezoelectric actuator driver system purposed for integration into defense and aerospace precision motion control applications, particularly those in laser optics. The core challenge addressed was the mismatch between the standardized 28V DC power bus used in military systems and the significantly higher voltage requirements of piezoelectric actuators. Existing commercial drivers were evaluated and found unsuitable for field deployment due to inadequate ruggedness, excessive complexity, or power limitations. Consequently, a modular system architecture was designed featuring four independent driver channels, each using a high-voltage, high-current linear amplifier topology to scale …

Adaptive Delay Compensation Frameworks For Distributed Real-Time Co-Simulation In Power Systems, Elutunji Buraimoh

All Dissertations

This dissertation presents a model-free, adaptive delay prediction and compensation framework for geographically distributed real-time power system co-simulation environments. Communication delays—both constant and real-time-varying—significantly degrade the accuracy, fidelity, and stability of co-simulated systems, particularly in dynamic and transient analyses of partitioned power systems. To address this, a predictor-based framework is developed that compensates for delays without requiring system models, computationally intensive signal transformations, or manual intervention.

The proposed solution leverages a Damping Impedance Method as the interface algorithm, combined with a sliding-mode control-inspired predictor system. Both single-parameter and multi-parameter predictor configurations are implemented, with the multi-parameter design providing an additional …

Artificial Intelligence Applications For Grid-Connected Solar Inverters, Utkirjon Ubaydullaev, Sarvinoz Mirzaeva, Hasan Mustafoev

Chemical Technology, Control and Management

The increasing global demand for renewable energy has highlighted the importance of grid-connected solar inverters in ensuring efficient and stable power conversion. However, challenges such as fluctuations in solar energy generation, grid disturbances, and power quality issues necessitate advanced control strategies. The integration of artificial intelligence (AI) into solar inverters presents a transformative solution, enhancing performance, adaptability, and reliability in real-world applications.

This review explores the role of AI techniques, including machine learning (ML), deep learning (DL), fuzzy logic, and reinforcement learning (RL), in optimizing key inverter functionalities such as maximum power point tracking (MPPT), fault detection, power quality enhancement, …

Static Characteristics Of An Electromagnetic Three-Phase Reactive Power Sensor For Converting Asymmetric Currents, Timur Urunbayevich Kurbaniyazov

Chemical Technology, Control and Management

This article discusses the processes in the elements and structures of three-phase electromagnetic current sensors used in measuring and controlling three-phase asymmetric reactive power in power supply systems, research models of quantities and parameters, physical mechanisms, and mathematical formulas based on graphical models.

Power Quality Event Diagnosis Using Multi-Rate Neural Networks, Jordan D. Lloyd

Electrical Engineering Theses - Archive

Power quality disturbances (PQDs) are among the primary challenges facing modern electrical systems, as they degrade the performance and lifespan of connected equipment. This thesis investigates the relationship between the rate at which voltage waveform data are sampled, the reliability of these measurements, and the ability of deep neural networks to classify PQDs accurately. A one-dimensional convolutional neural network (CNN) was trained and evaluated across multiple sampling rates and signal-to-noise ratios to quantify how information loss in the temporal and spectral domains affects classification reliability. The results demonstrate that model accuracy degrades nonlinearly as sampling rate and signal-to-noise ratio (SNR) …

Hardware Applications Of High-Speed Fault Detection Algorithms, Daniel Zintsmaster

All Theses

The growing need for a sustainable electric energy infrastructure has driven research into control, protection, and optimization of power systems. A key challenge is that the changing grid must operate at increasingly higher speeds, but many current hardware devices cannot meet these demands. This thesis focuses on power system protection, aiming to design a hardware solution that can detect and isolate faults in microseconds, ensuring faster, more reliable grid operations. The first hardware developed was for a low-voltage direct current (LVdc) microgrid, which faces challenges due to a lack of protection schemes and novel speed requirements. This thesis presents protection …

Automated Solutions For Hydroponic Plant Growth, Sydney Mcclure, Adam Lachguar

Sustainability Conference

Within the past year, Project H.O.M.E. has been focusing on the design and development of a semi-automatic hydroponic system specifically for sustaining plant life in Martian-like conditions. Given the significance of extended space-based travel, where the duration of human life in space is a crucial factor, growing food becomes imperative. This project has integrated electrical engineering and computer science, with features like automated pH testing and sensor-based evaluations. Key functionalities, including timed watering and automatic adjustments, were coded to enhance plant care. Initially, the project’s comprehensive research and strategic planning resulted in detailed blueprints and computer-aided design models for the …

Harmonic Flow Modeling And Analysis Of A Green Hybrid Ac/Dc Seaport Power System, Krishan Kaushal Ram, Taufik, Helen Yu, Siddharth Vyas

Master's Theses

This thesis aims to design and develop a model for a proposed Green Seaport power system and perform harmonic analysis. The model was developed using MATLAB Simulink and tests were performed by dividing the system into several Battery Energy Storage System (BESS) operating modes such as simultaneous charging and discharging, simultaneous charging, and simultaneous discharging. For each mode, BESS state of charge and other factors such as solar irradiance for the PV system, load levels and power factor were varied to observe the impact on system’s voltage Total Harmonic Distortion (THD) level and current Total Demand Distortion (TDD). 62 separate …

Design Of High Efficiency Doherty Power Amplifier, Kobi G. Kelly, Severin Pindell

Electrical Engineering

The project includes design and fabrication of a high efficiency power amplifier for a student design competition held at International Microwave Symposium (IMS) 2023. Efficient power amplifiers are critical for base station communication requiring efficient use of available power. The final design optimizes power added efficiency (PAE) and linearity. The amplifier will operate at 2.45 GHz. Competitive PAE above 50%, and C/I above 30 dB is achieved by leveraging a Doherty class amplifier using accurate discrete CGH4006P transistor models to simulate an efficient and linear design. Unique design features include optimal transistor bias point selection and power split ratios between …

Features Of Magnetoelastic Converters Of Mechanical Quantities Of Transformer Type, Sulton Amirov, Kamila Jurayeva

Chemical Technology, Control and Management

The article discusses the features of a magnetoelastic transformer type transducer. In magnetoelastic transformer-type transducers, mutual inductance is assumed as a variable value, which is a function of the value of the applied mechanical force. Hence, the transformation coefficients of such converters are also variable. There are also choke type converters in which a change in the magnetic permeability of the magnetic circuit leads to a change in the total electrical resistance of the choke. For further research, transformer-type converters were selected, which make it possible to widely implement techniques for improving basic characteristics.

Resilient, Sustainable, And Secure Systems Support For Ultra-Low-Power Computational Things, Nicole Tobias

All Dissertations

Wireless battery-free and energy-harvesting devices are expanding the reach and vision of the Internet of Things, where trillions of embedded computational things interconnect ubiquitously around us and inform many different aspects of our everyday lives. Designing these systems without batteries and interconnecting wires lowers maintenance, environmental, and economic costs while also extending device lifetime and deployment opportunities. Over the last decade, research on these ultra-low-power embedded sensors and systems has dramatically increased — enabling new and exciting prospects in many different scientific fields, from smart building and health monitoring applications to animal and activity tracking.

These systems are not without …

Ism-Band Energy Harvesting Wireless Sensor Node, Fnu Naveed

Graduate Theses and Dissertations

In recent years, the interest in remote wireless sensor networks has grown significantly, particularly with the rapid advancements in Internet of Things (IoT) technology. These networks find diverse applications, from inventory tracking to environmental monitoring. In remote areas where grid access is unavailable, wireless sensors are commonly powered by batteries, which imposes a constraint on their lifespan. However, with the emergence of wireless energy harvesting technologies, there is a transformative potential in addressing the power challenges faced by these sensors. By harnessing energy from the surrounding environment, such as solar, thermal, vibrational, or RF sources, these sensors can potentially operate …

Improving Cellphone-Based Bio-Imaging Technique For Fluorescence Detection, Erteza T. Efaz

LSU Master's Theses

The research presented in this thesis focuses on the design, development, and evaluation of a fluorescence detection system. The system is implemented primarily as an Android application, Auto Camera, which leverages smartphone cameras to capture and analyze fluorescent images. The application provides a user-friendly interface with some configurable features like exposure time, ISO speed, and storage limit; as well as defining detection thresholds and setting acquisition intervals. This study begins with the architectural framework of the Android application, which is written in Java using Android Studio. The API compatibility is set to version 33, and users are prompted to grant …

Power Amplifier Based On Composite Injection-Voltaic Transistors, Nodira Batirdjanovna Alimova

Chemical Technology, Control and Management

The problem of high-current radio engineering devices is related to the fact that the use of high-power transistors and other semiconductor devices is limited by such a phenomenon as a secondary breakdown, in which there is a sharp decrease in the voltage on the device with simultaneous internal current lacing, and the device fails. To solve the problem of secondary breakdown, schemes have been proposed that operate stably at reverse voltage values 4-5 times higher than usual and at power dissipation 2-3 times higher than the maximum allowable power for an individual device. The problem is proposed to be solved …

Chatgpt As Metamorphosis Designer For The Future Of Artificial Intelligence (Ai): A Conceptual Investigation, Amarjit Kumar Singh (Library Assistant), Dr. Pankaj Mathur (Deputy Librarian)

Library Philosophy and Practice (e-journal)

Abstract

Purpose: The purpose of this research paper is to explore ChatGPT’s potential as an innovative designer tool for the future development of artificial intelligence. Specifically, this conceptual investigation aims to analyze ChatGPT’s capabilities as a tool for designing and developing near about human intelligent systems for futuristic used and developed in the field of Artificial Intelligence (AI). Also with the helps of this paper, researchers are analyzed the strengths and weaknesses of ChatGPT as a tool, and identify possible areas for improvement in its development and implementation. This investigation focused on the various features and functions of ChatGPT that …

Research Of Three-Phases Current’S Transducers Of Filter-Compensation Devices For Control Reactive Power’S Consumption Of Asynchronous Motor, Ilkhomjon Khakimovich Siddikov, Dilyorbek Karimjonov Doniyorbek O'G'Li -, Abdumutal Abdikarimovich Abdigapirov

Chemical Technology, Control and Management

In the article given materials of developing of three-phase electromagnetic current transducers of reactive power, using with asynchronous motor, methods connecting of two sensing element, series, parallel and differential and loops suitable for each phase, dynamic characteristics of output signals of three-phase electromagnetic current transducers asynchronous motor.

On the basis of modern calculation and design complexes are of great importance in the research variable sizes of three-phase current electromagnetic transducers of filter-compensation devices of reactive power of asynchronous motors. Presented mathematical model of research of electrical, electromagnetic and magnetic elements of electromagnetic current transducers in the …

Enhancing Traffic Safety In Unpredicted Environments With Integration Of Adas Features With Sensor Fusion In Intelligent Electric Vehicle Platform With Implementation Of Environmental Mapping Technology, David S. Obando Ortegon

College of Graduate Studies: Theses & Dissertations

A major objective on society is to reduce the number of accidents and fatalities on the road for drivers, and pedestrians. Therefore, the automotive engineering field is working on this problem through the development and integration of safety technologies such as advanced driving assistance systems. For this reason, this work was intended to develop and evaluate the performance of different ADAS features and IV technologies under unexpected scenarios. This by the development of safety algorithms applied to the intelligent electric vehicle designed and built in this work, through the use of ADAS sensors based on sensor fusion. Evaluation of AEB, …

Wavelet-Based Real-Time Harmonic Phasor Estimation In Complex Signals With Inter-Harmonics And Transient Events, M A Aziz Jahan

Dissertations, Master's Theses and Master's Reports

Addressing the evolving challenges in modern power systems induced by the integration of Inverter Based Resources (IBRs), such as solar inverters, wind turbine converters, electric vehicle charging stations etc is the main goal of this research. The study focuses on the critical task of harmonic phasor estimation in the presence of sub-harmonics, inter-harmonics, time-varying harmonics, DC offset, transient events, and other power quality disturbances. A novel wavelet-based harmonic phasor estimation method is proposed to enhance accuracy, particularly during transient events, ensuring a nuanced understanding of phase angle variations. The research emphasizes the versatility of wavelet analysis for both steady-state and …

Hybrid Smart Transformer For Enhanced Power System Protection Against Dc With Advanced Grid Support, Moazzam Nazir

All Dissertations

The traditional grid is rapidly transforming into smart substations and grid assets incorporating advanced control equipment with enhanced functionalities and rapid self-healing features. The most important and strategic equipment in the substation is the transformer and is expected to perform a variety of functions beyond mere voltage conversion and isolation. While the concept of smart solid-state transformers (SSTs) is being widely recognized, their respective lifetime and reliability raise concerns, thus hampering the complete replacement of traditional transformers with SSTs. Under this scenario, introducing smart features in conventional transformers utilizing simple, cost-effective, and easy to install modules is a highly desired …

Dc Microgrid Fault Detection Using Multiresolution Analysis Of Traveling Waves, Rudy Montoya

Mechanical Engineering ETDs

Fast detection and isolation of faults in a DC microgrid is of particular importance. Fast tripping protection (i) increases the lifetime of power electronics (PE) switches by avoiding high fault current magnitudes and (ii) enhances the controllability of PE converters. This thesis proposes a traveling wave (TW) based scheme for fast tripping protection of DC microgrids. The proposed scheme utilizes a discrete wavelet transform (DWT) to calculate the high-frequency components of DC fault currents. Multiresolution analysis (MRA) using DWT is utilized to detect TW components for different frequency ranges. The Parseval energy calculated from the MRA coefficients are then used …

Intra-Hour Solar Forecasting Using Cloud Dynamics Features Extracted From Ground-Based Infrared Sky Images, Guillermo Terrén-Serrano

Electrical and Computer Engineering ETDs

Due to the increasing use of photovoltaic systems, power grids are vulnerable to the projection of shadows from moving clouds. An intra-hour solar forecast provides power grids with the capability of automatically controlling the dispatch of energy, reducing the additional cost for a guaranteed, reliable supply of energy (i.e., energy storage). This dissertation introduces a novel sky imager consisting of a long-wave radiometric infrared camera and a visible light camera with a fisheye lens. The imager is mounted on a solar tracker to maintain the Sun in the center of the images throughout the day, reducing the scattering effect produced …

Autonomous Wildfire Detection System, Matthew Pyle, Nick Garrett

Williams Honors College, Honors Research Projects

According to the National Fire Protection Association Journal, federal wildfire suppression costs in the United States have risen from an annual average of about $425 million from 1985 to 1999 up to $1.6 billion from 2000 to 2019. On average, more than 200,000 acres in the United States are burned per year due to wildfires, with more than 700,000 acres burned in 2020 alone. With the risk of wildfire ever rising, there is a need for better early detection of remote wildfires, as existing methods often include long delays like satellites or rely on human lookout towers. The objective is …

Smart Kettlebell, Cole Russell, Patrick Davis, Ryan Deboer, Isaac Stecker

Williams Honors College, Honors Research Projects

The purpose of design team 08’s senior design project is to create and implement a workout device that will be able to calculate the caloric expenditure, repetitions, and length of a workout. Once the duration of a workout is completed, the user metrics will be communicated from the kettlebell system to a user application via Bluetooth. The caloric expenditure will be used using the data that is provided from the accelerometer. The duration of the workout will be controlled using a push button that is connected to the kettlebell system that will allow for the start and stop of a …

Enhanced Security Utilizing Side Channel Data Analysis, Michael Taylor

Computer Science and Engineering Theses and Dissertations

The physical state of a system is affected by the activities and processes in which it is tasked with carrying out. In the past there have been many instances where such physical changes have been exploited by bad actors in order to gain insight into the operational state and even the data being held on a system. This method of side channel exploitation is very often effective due to the relative difficulty of obfuscating activity on a physical level. However, in order to take advantage of side channel data streams one must have a detailed working knowledge of how a …

Analysis Of Deep Learning Methods For Wired Ethernet Physical Layer Security Of Operational Technology, Lucas Torlay

All Theses

The cybersecurity of power systems is jeopardized by the threat of spoofing and man-in-the-middle style attacks due to a lack of physical layer device authentication techniques for operational technology (OT) communication networks. OT networks cannot support the active probing cybersecurity methods that are popular in information technology (IT) networks. Furthermore, both active and passive scanning techniques are susceptible to medium access control (MAC) address spoofing when operating at Layer 2 of the Open Systems Interconnection (OSI) model. This thesis aims to analyze the role of deep learning in passively authenticating Ethernet devices by their communication signals. This method operates at …

Direct Torque Control For Silicon Carbide Motor Drives, Mohammad Hazzaz Mahmud

Graduate Theses and Dissertations

Direct torque control (DTC) is an extensively used control method for motor drives due to its unique advantages, e.g., the fast dynamic response and the robustness against motor parameters variations, uncertainties, and external disturbances. Using higher switching frequency is generally required by DTC to reduce the torque ripples and decrease stator current total harmonic distortion (THD), which however can lower the drive efficiency. Through the use of the emerging silicon carbide (SiC) devices, which have lower switching losses compared to their silicon counterparts, it is feasible to achieve high efficiency and low torque ripple simultaneously for DTC drives.

To overcome …

The Effects Of The Transient And Performance Loss Rates On Pv Output Performance, Chibuisi Chinasaokwu Okorieimoh, Brian Norton, Michael Conlon

Conference papers

Solar photovoltaic (PV) panels experience long-term performance degradation as compared to their initial performance, resulting in lower like-per-like efficiencies and performance ratios. Manufacturers of solar photovoltaic modules normally guarantee a lifespan of more than 20 years. To meet such commitments, it is important to monitor and mitigate PV module degradation during this period, as well as beyond, to recognize maintenance and repair needs. Solar PV modules degrade over time, becoming less effective, less reliable, and eventually unusable. The effects of transient and performance loss rates on the output performance of polycrystalline silicon (p-Si) solar PV modules are the focus of …

Data Forgery Detection In Automatic Generation Control: Exploration Of Automated Parameter Generation And Low-Rate Attacks, Yatish R. Dubasi

Computer Science and Computer Engineering Undergraduate Honors Theses

Automatic Generation Control (AGC) is a key control system utilized in electric power systems. AGC uses frequency and tie-line power flow measurements to determine the Area Control Error (ACE). ACE is then used by the AGC to adjust power generation and maintain an acceptable power system frequency. Attackers might inject false frequency and/or tie-line power flow measurements to mislead AGC into falsely adjusting power generation, which can harm power system operations. Various data forgery detection models are studied in this thesis. First, to make the use of predictive detection models easier for users, we propose a method for automated generation …

An 8-Bit Analog-To-Digital Converter For Battery Operated Wireless Sensor Nodes, Marvin Wayne Suggs Jr.

Graduate Theses and Dissertations

Wireless sensing networks (WSNs) collect analog information transduced into the form of a voltage or current. This data is typically converted into a digital representation of the value and transmitted wirelessly using various modulation techniques. As the available power and size is limited for wireless sensor nodes in many applications, a medium resolution Analog-to-Digital Converter (ADC) is proposed to convert a sensed voltage with moderate speeds to lower power consumption. Specifications also include a rail-to-rail input range and minimized errors associated with offset, gain, differential nonlinearity, and integral nonlinearity. To achieve these specifications, an 8-bit successive approximation register ADC is …