Signal Processing Commons^™

The Design, Building, And Testing Of A Constant On Discreet Jammer For The Ieee 802.15.4/Zigbee Wireless Communication Protocol, Alexandre J. Marette

Master's Theses

As wireless protocols become easier to implement, more products come with wireless connectivity. This latest push for wireless connectivity has left a gap in the development of the security and the reliability of some protocols. These wireless protocols can be used in the growing field of IoT where wireless sensors are used to share information throughout a network. IoT is being implemented in homes, agriculture, manufactory, and in the medical field. Disrupting a wireless device from proper communication could potentially result in production loss, security issues, and bodily harm. The 802.15.4/ZigBee protocol is used in low power, low data rate, …

Image Processing Applications In Real Life: 2d Fragmented Image And Document Reassembly And Frequency Division Multiplexed Imaging, Houman Kamran Habibkhani

LSU Doctoral Dissertations

In this era of modern technology, image processing is one the most studied disciplines of signal processing and its applications can be found in every aspect of our daily life. In this work three main applications for image processing has been studied.

In chapter 1, frequency division multiplexed imaging (FDMI), a novel idea in the field of computational photography, has been introduced. Using FDMI, multiple images are captured simultaneously in a single shot and can later be extracted from the multiplexed image. This is achieved by spatially modulating the images so that they are placed at different locations in the …

Quantification Of The Impact Of Photon Distinguishability On Measurement-Device- Independent Quantum Key Distribution, Garrett K. Simon, Blake K. Huff, William M. Meier, Logan O. Mailloux, Lee E. Harrell

Faculty Publications

Measurement-Device-Independent Quantum Key Distribution (MDI-QKD) is a two-photon protocol devised to eliminate eavesdropping attacks that interrogate or control the detector in realized quantum key distribution systems. In MDI-QKD, the measurements are carried out by an untrusted third party, and the measurement results are announced openly. Knowledge or control of the measurement results gives the third party no information about the secret key. Error-free implementation of the MDI-QKD protocol requires the crypto-communicating parties, Alice and Bob, to independently prepare and transmit single photons that are physically indistinguishable, with the possible exception of their polarization states. In this paper, we apply the …

Gui For Mri-Compatible Neural Stimulator And Recorder, Soo Han Soon, Nishant Babaria, Ranajay Mandal, Zhongming Liu

The Summer Undergraduate Research Fellowship (SURF) Symposium

Functional magnetic resonance imaging (fMRI) and electroencephalography (EEG) are useful tools to analyze brain activities given active stimulation. However, the electromagnetic noise from the MRI distorts the brain signal recording and damages the subject with excessive heat generated on the electrodes attached to the skin. MRI-compatible recording and stimulation systems previously developed at LIBI lab were capable of removing the electromagnetic noise during the imaging process. Previously, the hardware systems had required the integrative software that could control both circuits simultaneously and enable users to easily change recording and stimulation parameters. Graphical user interface (GUI) programmed with computer language informed …

Two Senior Projects: 2.4 Ghz, 40% Efficiency Radio Frequency Amplifier, Ieee Design Contest, & Design And Implementation Of A Software Costas Loop For Audio Frequencies, Robert J. Tong

Electrical Engineering

How to Read this Document:

This document combines two senior project reports. The first senior project documents designing a class AB RF amplifier. The second, discusses the design and implementation of a software Costas loop for audio frequencies. The first report begins on the next page, while the Costas loop report starts on page 24. The two reports are orthogonal from one another. It is not a prerequisite to read the RF amplifier report before reading the Costas loop report. This document is merely two reports combined into one document. The second report, about the Costas loop, was written as …

Implementation Of Range Autofocus For Sar Radar Imaging, Nicholas J. Testin, Philip Davis

KSU Journey Honors College Capstones and Theses

The range calculation for an FMCW radar depends on accurate linear modulation. In some circumstances, linear modulation may not be available and must be corrected for. This paper describes an autofocus technique used to correct for phase error due to non-linearities in the components of a FMCW radar. Also described here is the algorithm used in calculating the phase error and application of the phase correction with triangle modulation. Known errors were calculated at certain distances and applied to correcting the phase of data taken at similar distances. The results given were generated using a SAR working outside linear ranges.

Data Logging System For A Synthetic Aperture Radar Unit, Nicholas J. Testin, Philip Davis, Ian Dorell, Alexander Gillespie

KSU Journey Honors College Capstones and Theses

A small, existing radar unit lacked the ability to automatically store the data it was receiving, which made its use clunky and cumbersome. A system was constructed to allow an on-board microprocessor to track distance traveled, and automatically store the data output from the radar unit to a portable memory unit for later data processing. Distance traveled is determined using a specially designed mobile cart, which electronically converts the rotation of a wheel into an electrical signal while also providing stability for taking accurate radar measurements. The output data from the radar unit is stored as a properly-formatted sound file …

Scaled Synthetic Aperture Radar System Development, Ryan K. Green

Master's Theses

Synthetic Aperture Radar (SAR) systems generate two dimensional images of a target area using RF energy as opposed to light waves used by cameras. When cloud cover or other optical obstructions prevent camera imaging over a target area, SAR can be substituted to generate high resolution images. Linear frequency modulated signals are transmitted and received while a moving imaging platform traverses a target area to develop high resolution images through modern digital signal processing (DSP) techniques. The motivation for this joint thesis project is to design and construct a scaled SAR system to support Cal Poly radar projects. Objectives include …

An Eigenvector-Based Test For Local Stationarity Applied To Array Processing, Jorge Quijano, Lisa M. Zurk

Electrical and Computer Engineering Faculty Publications and Presentations

In sonar array processing, a challenging problem is the estimation of the data covariance matrix in the presence of moving targets in the water column, since the time interval of data local stationarity is limited. This work describes an eigenvector-based method for proper data segmentation into intervals that exhibit local stationarity, providing data-driven higher bounds for the number of snapshots available for computation of time-varying sample covariance matrices. Application of the test is illustrated with simulated data in a horizontal array for the detection of a quiet source in the presence of a loud interferer.

Early Wildfire Detection Using Temporal Filtering And Multi-Band Infrared Analysis, Ansel John Boynton

Master's Theses

Every year wildfires threaten or destroy ecological habitats, man-made infrastructure and people’s lives. Additionally millions of dollars are spent each year trying to prevent and control these fires. Ideally if a wildfire can be detected before it rages out of control it can be extinguished and avoid large scale devastation. Traditional manned fire lookout towers are neither cost effective nor particularly efficient at detecting wildfire. It is proposed that temporal filtering can be used to isolate the signals created at the beginnings of potential wildfires. Temporal filtering can remove any background image and any periodic signals created by the camera …

Tunable Fano Resonances Based On Two-Beam Interference In Microring Resonator, Ting Hu, Ping Yu, Chen Qui, Huiye Qui, Fan Wang, Mei Yang, Xiaoqing Jiang, Hui Yu, Jianyi Yang

Electrical & Computer Engineering Faculty Research

In this paper, a resonant system is demonstrated on silicon-on-insulator wafer to achieve tunable Fano resonances. In this system, the Fano resonance originates from the interference of two beams resonant in the microring resonator. The shapes of the Fano resonances are tunable through controlling the phase difference of the two beams. Both large slope and high extinctionratio (ER) are obtained when the phase difference is 0.5π or 1.5π. Experimental results show that Fano resonances with steep slope and ER over 20 dB are achieved in the whole free spectral range by controlling the microheaters to meet the phase condition.

Direction Finding With Mutually Orthogonal Antennas, David F. Chick

Theses and Dissertations

Estimating the direction-of-arrival of incident electromagnetic plane waves (a.k.a. direction finding or DF) has typically been accomplished in the past using arrays of spatially separated antennas. The spatial separation produces a delay in each antenna's measured voltage due to the finite propagation time as the wave strikes each antenna in succession. In this thesis, we approach the problem differently by using three antennas that have been oriented in orthogonal directions but are co-located at the origin of a coordinate system. Being co-located, this mutually orthogonal arrangement of antennas cannot detect the propagation phase delay and must rely solely on the …

Reflective And Beam-Through Types Of Fiber Optic Sensor For Displacement Measurement., Walaa Fawzi Al–Masri

Student Works (2010-2019)

This dissertation proposes and demonstrates fiber-optic displacement sensor (FODS) theoretically and experimentally using the intensity modulation technique to measure a displacement from a probe and target. The sensor uses a multimode plastic bundled fiber as a probe and He-Ne laser as a source. The performance of the sensor is compared for different type of probe and target. For a pair type bundled fiber, both the experimental and theoretical results exhibit the same type of characteristic features. The front slope sensitivities are obtained at 1.71 and 1.0 mW/μm for the theoretical and experimental approaches respectively, while the back slope sensitivities are …

Synthetic Aperture Radar Imaging Simulated In Matlab, Matthew Schlutz

Master's Theses

This thesis further develops a method from ongoing thesis projects with the goal of generating images using synthetic aperture radar (SAR) simulations coded in MATLAB. The project is supervised by Dr. John Saghri and sponsored by Raytheon Space and Airborne Systems. SAR is a type of imaging radar in which the relative movement of the antenna with respect to the target is utilized. Through the simultaneous processing of the radar reflections over the movement of the antenna via the range Doppler algorithm (RDA), the superior resolution of a theoretical wider antenna, termed synthetic aperture, is obtained. The long term goal …

Spatio-Spectral Sampling And Color Filter Array Design, Keigo Hirakawa, Patrick J. Wolfe

Electrical and Computer Engineering Faculty Publications

Owing to the growing ubiquity of digital image acquisition and display, several factors must be considered when developing systems to meet future color image processing needs, including improved quality, increased throughput, and greater cost-effectiveness. In consumer still-camera and video applications, color images are typically obtained via a spatial subsampling procedure implemented as a color filter array (CFA), a physical construction whereby only a single component of the color space is measured at each pixel location. Substantial work in both industry and academia has been dedicated to post-processing this acquired raw image data as part of the so-called image processing pipeline, …

Block Level Link Path Design And Multilayer Via Transition Model Assembly Using S-Parameters, Francesco De Paulis

Masters Theses

"In high-speed data communication systems the complexity of link path between transmitters and receivers present a challenge for designers to maintain an acceptable bit error rate. An approach is presented in this thesis to design the link path on a block-by-block basis. The unique advantage of this approach lies on the physics-based model of each block, which then relates performance to geometry and makes design improvement and optimization possible. A tool based on the manipulation of frequency domain data has been designed to help in the design and analysis process of fast communication systems. It accepts as inputs the frequency …

Electromagnetic Propagation Prediction Inside Aircraft Cabins, Genevieve Hankins

Electrical & Computer Engineering Theses & Dissertations

Electromagnetic propagation models for signal strength prediction within aircraft cabins are essential for evaluating and designing a wireless communication system to be implemented onboard aircraft. There are many commercially available software packages for predicting wireless system performance in conventional indoor environments. It is of interest to examine the available software to determine if the aircraft's electromagnetic environment (EME) can be modeled successfully without developing an aircraft specific prediction tool. EnterprisePlanner®, a registered product of Wireless Valley Communications, Incorporated, was selected for the present effort. The performance of the prediction model was evaluated through a comparison with field measurements taken on …

Electromagnetic Wave Propagation Prediction For Wireless Networks Inside Boeing Fuselages, Mennatoallah Youssef

Electrical & Computer Engineering Theses & Dissertations

Commercial grade software is intended for electromagnetic predictions within office buildings; it was used to develop models to analyze propagation inside airplane fuselages. This study shows that Wireless XGTD and Insite software can accurately predict power propagation within airplane fuselages. Current work uses fuselage models, which contain additional internal components. A comparison was made between empty and full fuselage to examine the effects of internal components. Two propagation model types [Fast 3D and Full 3D] were also compared for accuracy to experimental study. It was concluded that completed fuselages are suggested for further simulation study as well as that the …

Digital Image Processing, Russell C. Hardie, Majeed M. Hayat

Electrical and Computer Engineering Faculty Publications

In recent years, digital images and digital image processing have become part of everyday life. This growth has been primarily fueled by advances in digital computers and the advent and growth of the Internet. Furthermore, commercially available digital cameras, scanners, and other equipment for acquiring, storing, and displaying digital imagery have become very inexpensive and increasingly powerful. An excellent treatment of digital images and digital image processing can be found in Ref. [1]. A digital image is simply a two-dimensional array of finite-precision numerical values called picture elements (or pixels). Thus a digital image is a spatially discrete (or discrete-space) …

Stability Analysis And Augmentation Of A Closed-Loop Computer Control System Subject To Electromagnetic Disturbances, Mustafa Doğan

Electrical & Computer Engineering Theses & Dissertations

Most electronic and electrical equipment is not only a potential source of electromagnetic interference (EMI) but can also malfunction when exposed to certain levels of ambient EMI. This phenomena becomes more significant for digital control-computers automating the command and control performances in complex plants. Such EM disturbances can introduce transient signals on analog sensor and actuator lines, change data values on digital buses and in memory, or even produce logic changes in the CPU. The result of these so called computer upsets is the introduction of some degree of degradation in the quality of the control signal ranging from a …

Coupled Electrodynamic-Monte Carlo Simulations Of Nanoscale Gaas Terahertz Optical Mixers, Jiang Li

Electrical & Computer Engineering Theses & Dissertations

The concept of mixing or heterodyning has traditionally been used for microwaves and for radio frequency communications. However, the concept can easily be extended into the optical frequency regime. By doing so, the photomixing process can serve as a very versatile tool for both the generation of ultrahigh frequency (terahertz) and the detection of weak optical signals.

The aim of this thesis is to perform a theoretical study of the photomixing process inside GaAs devices as the non-linear elements. A coupled approach which combines the Monte Carlo simulation scheme for the carrier transport, with Maxwell's equation for the electrodynamics, has …

Material Evaluation By Pulsed Diode Laser Optoacoustics, Xiaodong Xu

Electrical & Computer Engineering Theses & Dissertations

Pulsed diode laser optoacoustic diagnostics were carried out to characterize solid sample materials. The apparatus developed is compact, portable, cost-effective and therefore very promising for both industrial as well as laboratory applications. To our knowledge, this is the first time that optoacoustic characterization and measurement have been performed with a diode laser. The method was successfully applied to measure the thickness of a multilayer structure non-intrusively. Internal cracks of the material were detected by this technique.

A theory for optoacoustic signal generation, propagation and detection is given. A numerical analysis technique is developed to solve for the expected signal. In …

Joint Map Registration And High Resolution Image Estimation Using A Sequence Of Undersampled Images, Russell C. Hardie, Kenneth J. Barnard, Ernest E. Armstrong

Electrical and Computer Engineering Faculty Publications

n many imaging systems, the detector array is not sufficiently dense to adequately sample the scene with the desired field of view. This is particularly true for many infrared focal plane arrays. Thus, the resulting images may be severely aliased. This paper examines a technique for estimating a high-resolution image, with reduced aliasing, from a sequence of undersampled frames. Several approaches to this problem have been investigated previously. However, in this paper a maximum a posteriori (MAP) framework for jointly estimating image registration parameters and the high-resolution image is presented. Several previous approaches have relied on knowing the registration parameters …

Development Of A Photon Counting System For Ozone Differential Absorption Lidar Signal Detection, Bradley Allen Eccles

Electrical & Computer Engineering Theses & Dissertations

A photon counting system was assembled and integrated into an existing ozone differential absorption lidar signal detection system to improve the range of ozone measurement. Results of data extraction from decaying ozone return signals are presented. Photomultiplier tube detector models EMI 9214Q and EMI 9B17Q are evaluated and characterized. Detector operating performance was based on tube quantum efficiency, gain, dark current, and linearity. The influence of photomultiplier tube characteristics on photon counting performance are discussed along with the recommended optimum photon counting operating conditions. Two photomultiplier gating schemes, focus grid and four dynode gating, are described for use in photon …