Power and Energy Commons^™

Integration Of Thin Film Tpv Cells To Cvd Diamond Heat Spreaders, Emma J. Renteria

Electrical and Computer Engineering ETDs

In this work, techniques to isolate thermophotovoltaic (TPV) devices from the growth substrate and their subsequent integration with Chemical Vapor Deposition (CVD) diamond heat spreaders will be discussed, with the envisioned goal of fabricating thermally managed cells. CVD diamond heat spreaders are a great option for thermal management of TPV cells. The key requirement, however, is the bonding of the TPV cell directly onto the diamond wafer without the presence of thick (>350 μm) growth substrates, which can offer significant thermal resistance.

The first approach is to release GaSb epitaxial layers from GaSb substrates. However, this is challenging due …

Microgrid Energy Management With Flexibility Constraints: A Data-Driven Solution Method, Okan Ciftci

LSU Master's Theses

Microgrid energy management is a challenging and important problem in modern power systems. Several deterministic and stochastic models have been proposed in the literature for the microgrid energy management problem. However, more accurate models are required to enhance flexibility of the microgrids when accounting for renewable energy and load uncertainties. This thesis proposes key contributions to solve the energy management problem for smart building (or small-scale microgrid). In Chapter 3, a deterministic energy management model is presented taking into account system flexibility requirements. Energy storage systems are deployed to enhance the grid flexibility and ramping capability. The objective function of …

A Case Study : An Economic Evaluation Of Liqufied Natural Gas (Lng) Fuel For New Ships Of Korean Ship Owners, Hyuntae Kim

World Maritime University Dissertations

No abstract provided.

Lng As A Marine Fuel In Malta : Case Study : Regulatory Analysis And Potential Scenarios For Lng Bunkering Infrastructure, Mark Philip Cassar

World Maritime University Dissertations

No abstract provided.

Investigation Of Auxiliary Power Potentials Of Solar Photovoltaic Applications On Dry Bulk Carrier Ships, Wandifa Saidyleigh

World Maritime University Dissertations

No abstract provided.

Multi-Mw Solar Pv Pumping System With Capacity Modulation And Battery Voltage Support, Oluwaseun M. Akeyo, Vandana Rallabandi, Dan M. Ionel

Power and Energy Institute of Kentucky Faculty Publications

Solar photovoltaic (PV) renewable energy systems are undergoing major technological developments and large-scale field deployment and electric grid integration. This paper proposes a method of expanding the capacity of an existing irrigation farm with additional pumps powered by solar PV. The system includes PV arrays and battery energy storage connected to a common dc bus, which energizes an array of variable speed inverter driven pumps. Capacity modulation is achieved by energizing an optimal number of pumps required in order to meet a particular load demand with minimum supply energy. A grid connection to the dc bus of the power electronic …

Hardware Based Testing Of Communication Based Control For Dc Microgrid, Mahmoud Saleh, Yusef Esa, Ahmed Mohamed

Publications and Research

This paper further describes our work presented in Industry Application Society 2016 Conference, with more details related to the control and operation of the microgrid. The DC microgrid facility was custom designed and implemented at CCNY with minimal off-the-shelf components to enable flexibility and reconfiguration capability. The design steps, requirements, and experimental results of the developed testbed were discussed. As a case study, a central controller for energy management algorithm was developed and tested under several operational scenarios. The experimental results verify the applicability of the developed testbed for validating DC microgrid controllers.

Special Issue On Supercapacitors, Xiao-Gang Zhang

Journal of Electrochemistry

/

Strategies To Enhance Energy Density For Supercapacitors, Jun-Wei Lang, Xu Zhang, Ru-Tao Wang, Xing-Bin Yan

Journal of Electrochemistry

The biggest advantage of supercapacitor lies in not only the excellent pulse and fast charging-discharging performance, but also the characteristics of long cycle life and wide operating temperature window with no pollution. However, the energy density of supercapacitor is low. In this paper, the working principle, the development status, defects and improvement method of supercapacitors are introduced. Based on the research workes of the supercapacitors with high energy density in our group, combined with the literature reports in recent years, the strategies to promote the energy density of supercarpacitors will be focused. The strategies for the enhancement of energy density …

Porous Carbon Materials Produced By Koh Activation For Supercapacitor Electrodes, Jiang-Lin Ye, Yan-Wu Zhu

Journal of Electrochemistry

Porous carbon materials with high specific surface area and excellent conductivity have wide applications in supercapacitor electrodes. Much effort has been made to synthesize and tailor the microstructures of porous carbon materials via various activation procedures (physical and chemical activations). In particular, the chemical activation using potassium hydroxide (KOH) as an activating reagent is promising because of the well-defined micropore size distribution and ultrahigh specific surface area up to 3000 m²·g^-1 of the resulting porous carbons. Based mainly on the previous works taken by the authors and collaborators in the field, we have summarized the activation mechanism …

Recent Advances On Carbon And Transition Metallic Compound Electrodes For High-Performance Supercapacitors, Dun Lin, Xi-Yue Zhang, Yin-Xiang Zeng, Ming-Hao Yu, Xi-Hong Lu, Ye-Xiang Tong

Journal of Electrochemistry

Supercapacitors (SCs) have stimulated intensive interests for their promising applications in electric vehicles and portable electronics, etc. Electrode material is the most important key component of SCs, which vastly determines the performance of SCs. Carbon and transition metallic compound materials have attracted considerable attention and been widely explored as electrode materials. However, the insufficient capacitance of carbon materials and unsatisfactory conductivity and cyclic stability of transition metallic compounds severely limit their implementation as robust SC electrodes. Herein, we highlight our recent efforts to boost the capacitive performance of carbon and metal oxide/nitride electrodes by rationally structural and componential design. The …

Lithium Ion Hybrid Capacitor With High Energy Density, Xian-Zhong Sun, Xiong Zhang, Kai Wang, Yan-Wei Ma

Journal of Electrochemistry

Lithium ion hybrid capacitors are electrochemical energy storage devices combining the advantages of both Li-ion battery and electrochemical capacitor. They can be extensively used in many fields. However, the commercialization of lithium ion hybrid capacitor has been encountered several problems, e.g., the device structure design, the screening of materials, the pre-lithiation process, and the interface between electrolyte and electrode, etc. This review summarizes the recent research advances in lithium ion hybrid capacitor with high energy density, including the selection of the active materials in cathode/anode and the separator, the pre-lithiation method using the three-electrode structure, the high- and low-temperature performances, …

Template Induced Fabrication Of Nitrogen Doped Carbon Sheets As Electrode Materials In Supercapacitors, Tao Huang, Guang-Zhi Tao, Chong-Qing Yang, Deng Lu, Lie Ma, Dong-Qing Wu

Journal of Electrochemistry

Due to the good electrical conductivity, high specific surface area, and excellent chemical/mechanical stability, carbon nanomaterials with two-dimensional morphology have gradually become the hot topic of the research on supercapacitors. Herein, we report for the first time the fabrication of nitrogen doped carbon sheets (NCSs). In our approach, the sheet-like magnisum aluminum (MgAl) layered double hydroxide was used as the hard template, which was mixed with o-phenylene diamine and iron chloride. The following thermal treatment could render the polymerization and carbonization of o-phenylene diamine. The NCSs with ordered hexagonal architectures were formed by final etching process of the thermally treated …

Preparation And Characterization Of Cellulose Acetate-Based Separator For Lithium-Ion Batteries, Hua-Feng Luo, Yuan-Dong Qiao

Journal of Electrochemistry

To improve the electrolyte wettability and thermal resistance of separators used for lithium-ion battery, a novel cellulose acetate (CA)-based separator is facilely prepared by non-solvent induced phase separation (NIPS) wet-process and investigated in lithium-ion batteries. Systematical investigations including morphological characterization, electrolyte wettability and thermal resistance testing were carried out. The results demonstrated that the CA-based separator exhibited well developed three-dimensional porous structures with porosity up to 65%, which is 1.5 times higher than that of PE separator. The CA separator also showed excellent electrolyte uptake (285%) and thermal stability at 150 ^oC for 30 min. Compared with the commercial …

The Interval Grey Numbers Ranking Based On Risk Preferences, Zhaobin Li, Zhuo Zhang, Jian Liu, Shuai Zhang

Electrical and Computer Engineering Faculty Research & Creative Works

In this paper, a new method for ranking interval grey numbers to address the challenge in multi-criteria decision-making problems with interval grey numbers has been proposed. This new method involves the risk preferences of decision makers. First, we propose a new method to rank the interval grey numbers by comparing the possibility degree or whitened value. Second, we classify the decision makers into three different types according to their risk preferences then we establish the corresponding risk preference assumptions to solve the problem that different interval grey numbers with the same possibility degree or whitened value. Finally, we use a …

Magnus--An Ultra-High Specific Torque Pm Axial Flux Type Motor With Flux Focusing And Modulation, Vandana Rallabandi, Narges Taran, Dan M. Ionel, Ion G. Boldea

Power and Energy Institute of Kentucky Faculty Publications

Axial flux permanent magnet (AFPM) synchronous motors are attractive for low speed direct drive systems because of their high specific torque. The present paper proposes a novel axial flux machine topology, called MAGNUS, obtained by combining a yokeless central stator type NS arrangement with two external high polarity spoke-rotors, resulting in very high flux concentration. The stator, which includes main and auxiliary teeth for air-gap profiling has a small number of concentrated coils. Two stator configurations are discussed, the first, a yokeless construction with coils wound around the teeth, and the second with coils placed around the stator core in …

Quantitative Analysis Of Regenerative Energy In Electric Rail Traction Systems, Mahmoud Saleh, Oindrilla Dutta, Yusef Esa, Ahmed Mohamed

Publications and Research

This paper aims at determining the influential factors affecting regenerative braking energy in DC rail transit systems. This has been achieved by quantitatively evaluating the dependence of regenerative energy on various parameters, such as vehicle dynamics, train scheduling, ground inclination and efficiency of the electrical devices. The recuperated power and energy have been presented by a mathematical model, comprising of a set of empirical forms, which allows for thorough analysis. A detailed simulation model of a typical DC-traction system has been developed to validate the developed empirical forms. The results verified the validity of the proposed mathematical model, and demonstrated …

Inductance Testing According To The New Ieee Std 1812-Application And Possible Extensions For Ipm Machines, Vandana Rallabandi, Narges Taran, Dan M. Ionel, Ping Zhou

Power and Energy Institute of Kentucky Faculty Publications

Equivalent circuit parameters are very important for permanent magnet synchronous machines since they serve as the basis for performance estimation and implementation of power electronic drives controls. Specified in the newly approved IEEE Std 1812, a short-circuit test can be employed, in combination with an open-circuit measurement, in order to determine the back emf and the synchronous inductance. In this paper, it is shown that for interior permanent magnet (IPM) machines this approach can be used only to determine the d-axis inductance and additional and separate measurements are required for the q-axis inductance. In this respect, one method widely used …

Optimizing Distributed Energy Resources On A Distribution Feeder, Bill Henry, Stephen Macdonald, Nicole Wehner, Gabe Mcbride, Tyler Groth

Engineering and Technology Management Student Projects

The purpose of this study is to optimize a set of distributed energy resources (DERs) on an electric utility distribution level feeder. A DER is a decentralized resource, usually located at end-use electric utility customer sites, that stores or generates electricity – such as batteries and rooftop photovoltaic solar, or in the case of demand response, in which the utility has the ability to manage electricity consumption to the benefit of distribution grid operation. The aggregation and optimization of a set of DERs of disparate operating characteristics, over a period of three years is performed and the methods employed explained. …

Optimal Microgrids Placement In Electric Distribution Systems Using Complex Network Framework, Mahmoud Saleh, Yusef Esa, Nwabueze Onuorah, Ahmed Mohamed

Publications and Research

This paper provides a new approach to find the optimal location for Microgrids (MGs) in electric distribution systems using complex network analysis. An optimal location in this paper refers to a location that would result in increased grid resilience, reduced power losses, less line loading, higher voltage stability and secured supply to critical loads during power outage. The criteria used to find the optimal placement of MGs were based on the centrality analysis adopted from complex network theory, the center of mass concept used in physics, and the controlled delivery grid (CDG) concept. An IEEE 30-bus system was used as …

Energy Management Algorithm For Resilient Controlled Delivery Grids, Mahmoud Saleh, Yusef Esa, Ahmed Mohamed, Haim Grebel, Roberto Rojas-Cessa

Publications and Research

Resilience of the power grid is most challenged at power blackouts since the issues that led to it may not be fully resolved by the time the power is back. In this paper, a Real-Time Energy Management Algorithm (RTEMA) has been developed to increase the resilience of power systems based on the controlled delivery grid (CDG) concept. In a CDG, loads communicate with a central controller, periodically sending requests for power. The central controller runs an algorithm, based on which it may decide whether to grant the requested energy fully or partially. Therefore, the CDG limits loads discretionary access to …

Quantifying Forecast Uncertainty In The Energy Domain, Mohammad Saber

Dissertations (1934 -)

This dissertation focuses on quantifying forecast uncertainties in the energy domain, especially for the electricity and natural gas industry. Accurate forecasts help the energy industry minimize their production costs. However, inaccurate weather forecasts, unusual human behavior, sudden changes in economic conditions, unpredictable availability of renewable sources (wind and solar), etc., represent uncertainties in the energy demand-supply chain. In the current smart grid era, total electricity demand from non-renewable sources influences by the uncertainty of the renewable sources. Thus, quantifying forecast uncertainty has become important to improve the quality of forecasts and decision making. In the natural gas industry, the task …

Study Of Modified Deposition Process For Cu(In,Ga)Se2 Solar Cell Back Contact, Tasnuva Ashrafee

Electrical & Computer Engineering Theses & Dissertations

As the worldwide demand for renewable energy is increasing, growth of the global share of alternative energy sources would improve overall energy security as well as bring environmental benefits. So far, solar cells - the devices that convert direct sunlight into electricity - are dominated by silicon devices. Another alternative is thin film solar cell, whose main inspiration is to reduce the electricity production cost. Cu(In, Ga)Se₂ (CIGS) solar cells are considered to have a great prospective because of reduced material and energy consumption during manufacturing. Many CIGS solar cell manufacturers are already exhibiting GW-scale production capacity. With the …

Design Of Dc-Link Vscf Ac Electrical Power System For The Embraer 190/195 Aircraft, Eduardo Francis Carvalho Freitas, Nihad E. Daidzic

Journal of Aviation Technology and Engineering

A proposed novel DC-Link VSCF AC-DC-AC electrical power system converter for Embraer 190/195 transport category airplane is presented. The proposed converter could replace the existing conventional system based on the CSCF IDGs. Several contemporary production airplanes already have VSCF as a major or backup source of electrical power. Problems existed with the older VSCF systems in the past; however, the switched power electronics and digital controllers have matured and can be now, in our opinion, safely integrated and replace existing constant-speed hydraulic transmissions powering CSCF AC generators. IGBT power transistors for medium-level power conversion and relatively fast efficient switching are …

2017 Fall Engr333 Project Assignment, Matthew K. Heun

ENGR 333

The Fall 2017 ENGR333 project focused on campus energy cost savings.

I asked the students two questions:

• Section A: What would it take for Calvin to save $75k/year on natural gas costs?
• Section B: What would it take for Calvin to save $150k/year on energy costs (mostly electricity) using a new on-site co-gen plant?

Customer

The customer for this project was Phil Beezhold, Director of Calvin’s Physical Plant.

The Social Acceptance Of Community Solar: A Portland Case Study, Anne Weaver

Dissertations and Theses

Community solar is a renewable energy practice that's been adopted by multiple U.S. states and is being considered by many more, including the state of Oregon. A recent senate bill in Oregon, called the "Clean Electricity and Coal Transition Plan", includes a provision that directs the Oregon Public Utility Commission to establish a community solar program for investor-owned utilities by late 2017. Thus, energy consumers in Portland will be offered participation in community solar projects in the near future. Community solar is a mechanism that allows ratepayers to experience both the costs and benefits of solar energy while also helping …

Solar Powered Single-Axis Heliostat Active Solar Tracking Device, Mason Kyle Roberts

Physics

As a means of cooking food, the burning of biomass accounts for over 4 million premature deaths in third world countries (“Household Air Pollution and Health”). The focus of this project was to explore an alternative that could utilize focused sunlight to cook food. A solar tracker was designed to be affixed to a parabolic, reflective, tilted single axis heliostat to follow the sun throughout the day and focus the reflected light to the bottom of a cooking surface. This surface became hot enough to for the preparation of food or boiling/sterilization of water.

A goal for each project was …

Nigeria's Power Sector Roadmap: Policy Perspectives And Prospects, Bandele A. G. Amoo, O. M. Adebayo, Derek Ibeagha

Bullion

Various strategies have been employed over the years by the Government to boost power in the country. These strategies have been hinged on policies, reforms and roadmaps, including the 2005 Electric Power Sector Reform Act, the Roadmap for Power Sector Reform 2010 and the current Roadmap for Change. A perfunctory look at previous reforms has resulted in significant progress, including unbundling and privatizing the long-standing government-owned monopoly in the power sector. This paper takes a comprehensive assessment of the Roadmap of Change comparing it to previous policies, isolating policy perspectives, prospects and challenges facing it. It also gleans lessons from …

Density Functional Investigation On Cathode/Electrolyte Interface In Solid-State Lithium Batteries, Xuelong Wang, Ruijuan Xiao, Yong Xiang, Hong Li, Liquan Chen

Journal of Electrochemistry

The rapidly expanding application of lithium ion batteries stimulates research interest on energy storage devices with higher energy density, better safety and faster charge/discharge speed. All-solid-state lithium batteries have been considered as promising candidates because of their fewer side reactions and better safety compared with conventional lithium-ion batteries with organic liquid electrolytes. Looking for well-matched electrode/electrolyte interfaces is one of the keys to ensuring good comprehensive performance of solid-state lithium batteries. In this report, with the aid of first-principles simulations, the local structure and lithium ions transportation properties of electrolyte surfaces and cathode/electrolyte interfaces are investigated. The β-Li₃PS …

Effects Of Surface Modification Modes On Proton-Over-Vanadium Ion Selectivity Of Nafion®Membrane For Application In Vanadium Redox Flow Battery, Qing-Long Tan, Hai-Ning Wang, Shan-Fu Lu, Da-Wei Liang, Chun-Xiao Wu, Yan Xiang

Journal of Electrochemistry

The effect of surface modification modes on proton-over-vanadium ion selectivity was studied by spin-coating chitosan-Phosphotungstic Acid (PWA) as a single or double layer on Nafion membrane surface. To suppress the vanadium ions permeation through the Nafion? membrane in a vanadium redox flow battery (VRFB), the single surface-modified Nafion membrane (Nafion/chitosan-PWA)S and double surface-modified Nafion membrane (Nafion/chitosan-PWA)D demonstrated a 89.9% and 92.7% reduction of vanadium ion permeability in comparison with pristine Nafion, respectively. The (Nafion/chitosan-PWA)D exhibited betterhigher selectivity between proton and vanadium ions than the (Nafion/chitosan-PWA)S at the same layer thickness. Furthermore, the columbic efficiency for the VRFB single cell based …