Power and Energy Commons^™

Top-Down Aluminum Induced Crystallization For Photovoltaics, Seth Daniel Shumate

Graduate Theses and Dissertations

Passivating silicon solar cell surfaces is critical to fabricating very high efficiency and low cost photovoltaic devices. The sun-facing surface of the solar cell, known as the emitter, is particularly important when designing a solar cell. This work focused first on an alternative method of forming the emitter of silicon solar cells, and secondly on a method for improving the surface passivation of both these non-traditional and standard n-type solar cells.

Top-down aluminum induced crystallization (TAIC) was used for forming a polycrystalline silicon layer from amorphous silicon using aluminum to catalyze the crystallization at much lower temperatures than otherwise possible. …

Experimental Verification And Integration Of A Next Generation Smart Power Management System, Tavis Clemmer

Graduate Theses and Dissertations

With the increase in energy demand by the residential community in this country and the diminishing fossil fuel resources being used for electric energy production there is a need for a system to efficiently manage power within a residence. The Smart Green Power Node (SGPN) is a next generation energy management system that automates on-site energy production, storage, consumption, and grid usage to yield the most savings for both the utility and the consumer. Such a system automatically manages on-site distributed generation sources such as a PhotoVoltaic (PV) input and battery storage to curtail grid energy usage when the price …

Evaluating The Level Of Harmonic Distortion In A Typical Distribution Feeder, Wessen S. Bogale

UNLV Theses, Dissertations, Professional Papers, and Capstones

Steady-state analysis of electrical power systems is largely based on linear and sinusoidal AC circuits which allow the concept of impedance, phasors and well-defined power quantities (i.e., real, reactive and apparent powers). In reality, however, the electric load which was once composed of linear elements (e.g., induction motors, incandescent lighting, etc …) is becoming more and more nonlinear due to the wide-spread use of electronic components such as fluorescent lighting and variable-frequency drives that power the majority of electric motors. As a consequence, the current drawn by such devices is often distorted, thus containing a number of high frequency harmonics …

Energy Harvesting And Storage: The Catalyst To The Power Constraint For Leveraging Internet Of Things (Iot) On Trains, Kelechi Nwogu

Department of Computer Electronics and Engineering: Dissertations, Theses, and Student Research

The success of Wireless Sensor Networks is heavily constrained by its reliance on storage technology like batteries, which are a finite resource. Whilst the number of transistors in an IC doubles every 18 months, the energy density of batteries is relatively flat during the same time period. This is a key challenge in leveraging the Internet of Things on trains.

The gravity of this problem is increased by an order of magnitude when the network is to be scaled up to hundreds or thousands of nodes. Comprehensive research and development efforts have been devoted to building ultra-low power sensors. These …

Researches On In-Situ And Ex-Situ Characterization Techniques In Lithium Batteries, Wen-Jun Li, Jie-Yun Zheng, Lin Gu, Hong Li

Journal of Electrochemistry

Electrochemical performance of Lithium batteries is directly linked to interfacial transports, reactions and storing behaviors of electrons and ions at bulk-surface interfaces. It is extremely important to conduct evolution studies from atomic level to macro level in electron structures, crystal structures, microstructures and morphologies, chemical compositions and physical properties of battery materials at equilibrium and nonequilibrium in order to understand various structure-performance relations in lithium ion batteries. Advanced in-situ and ex-situ characterization techniques have been used widely to clarify scientific and technological problems in lithium batteries. This paper summarizes our efforts on battery researches using various experimental techniques, including in …

Recent Research Progress For Non-Pt-Based Oxygen Reduction Reaction Electrocatalysts In Fuel Cell, Ping Song, Ming-Bo Ruan, Jing Liu, Guang-Jun Ran, Wei-Lin Xu

Journal of Electrochemistry

The expensive Pt-based catalyst suffers from its susceptibility to time-dependent drift, methanol crossover, and carbon monoxide (CO) deactivation, which will block the large-scale commercial application of fuel cells. It is, therefore, necessary to develop efficient, low-cost, highly stable non-precious metal oxygen reduction reaction (ORR) catalysts with high catalytic performance. Here, we will pay attention to the research progress of non-precious metal and heteroatom-doped (N, B, P, S, F) metal-free ORR catalysts. Importantly, we mainly focus on the work developed by Xu’s group with the Fe-based non-precious metal and F/NF-doped metal-free ORR catalysts. The purpose of these works is to improve …

Research Progress Of Mn-Based Lithium-Rich Cathode Materials For Li-Ion Batteries, Luo-Zeng Zhou, Qun-Jie Xu, Wei-Ping Tang, Xue Jin, Xiao-Lei Yuan

Journal of Electrochemistry

With rapid development of new energy industry like electric vehicles and energy storage station, these fields highly demand the next generation of high performance Li-ion battery systems with stronger energy density, higher power density, and longer cycling life. Lithium-rich Mn-based cathode materials, xLi₂MnO₃·(1-x)LiMO₂(M=Mn, Co, Ni...), have become the hot topic and drawn attentions of scholars worldwide because of their high reversible capacity exceeding 240 mAh·g^-1, excellent electrochemical properties, and low cost, which makes them most promising cathode material candidates for next Li-ion battery system. The cathode material Li[Li_0.2Mn_0.54Ni …

Preparation And Properties Of Binary Oxides CoXCr1-XO3/2 Electrocatalysts For Oxygen Evolution Reaction, Tai-Lai Yang, Wen-Yan Dong, Hui-Min Yang, Li Zhang, Zhen-Hai Liang

Journal of Electrochemistry

Binary metal mixed oxides of Co and Cr with nominal compositional formulas, Co_xCr_1-xO_3/2 (x=0, 0.2, 0.4, 0.6, 0.8 and 1.0), were obtained by thermal decomposition method. The morphologies, crystal forms and valence states of the catalyst powders were analyzed by SEM, XRD and XPS, respectively. And the electrochemical properties, overpotentials and stabilities of Co_xCr_1-xO_3/2 electrodes for oxygen evolution reaction (OER) in an alkaline solution were evaluated by linear sweep voltammetry (LSV), staircase voltammetry and chronoamperometry, respectively. The results indicated that the mixtures of Co₃O₄ and eskolaite-Cr_{2 …}

Synthesis And Electrochemical Properties Of Cnts/V2O5 Hollow Microspheres, Liang Hao, Lai-Fa Shen, Jie Wang, Jia-Jia Zhu, Xiao-Chen Zhao, Xiao-Gang Zhang

Journal of Electrochemistry

The carbon nanotubes/vanadium oxides (CNTs/V₂O₅) hollow microspheres (VOC) were prepared via solvothermal process. The effects of the ratio for CNTs to V₂O₅ on the morphologies, structures and electrochemical performances were systemically investigated. The results indicate that CNTs dramatically enhanced the rate performances of VOC composite electrodes. When the ratio of CNTs is 7.1%, the VOC composite electrode exhibited the best electrochemical performance, which delivered a specific capacitance of 346 F·g^-1 at 0.5 A·g^-1 and maintained 75% at 8 A·g^-1 in 5 mol L^-1 LiNO₃. A hybrid capacitor …

A Platinum-Hydrogen Reference Micro-Electrode For All Vanadium Redox Flow Battery, Zhi-Bin Lin, Yan-Qing Dong, Ming-Sen Zheng, Quan-Feng Dong

Journal of Electrochemistry

A platinum-hydrogen reference micro-electrode was made with electroplating Pd on the surface of Pt wire and then coating anion membrane material. This reference electrode was built-in the porous electrode of the all vanadium redox flow batteries (VRFB), and monitored the charging /discharging and self-discharging of the VRFB. The results indicated that the capacity fading of VRFB occurred due to the graduate reduction of V(IV) active species in the electrolyte and the accumulation of V(V) in the positive electrode, leading to nonequilibrium of active species between the positive and negative electrodes.

Electrochemical Conversion Reactions And Their Applications For Rechargeable Batteries, Ting Li, Han-Xi Yang

Journal of Electrochemistry

Electrochemical conversion reactions have received considerable interest as a new redox mechanism for constructing high capacity electrodes of rechargeable batteries. Without strict restrictions on the crystalline structure of the host lattice and the size of the associated ions, conversion reactions can take place in a variety of different metal compounds with different metal cations and deliver much higher reversible capacities through full utilization of all the oxidation states of the transition-metal compounds, opening up a new avenue for developing high capacity materials of rechargeable batteries. This paper briefly reviews the state of the art and challenges of conversion electrodes and …

Porous Co3O4 Hollow Nanospheres Cathode Catalyst For High-Capacity And Long-Cycle Li-Air Batteries, Tong Liu, Na Li, Qing-Chao Liu, Xin-Bo Zhang

Journal of Electrochemistry

In this paper, a high specific surface area of porous Co3O4 hollow nanospheres was successfully synthesized via hydrothermal carbonization at 140 °C, followed by calcination using cobalt nitrate hexahydrate (Co(NO3)2·6H2O), hexamethylenetetramine (HMT), sucrose, and sodium citrate (Na3C6H5O7). The porous Co3O4 hollow nanospheres consisted of nanoparticles with high specific surface area of mesoporous structure, and could provide active reaction sites for OER and ORR. When used as lithium-air battery cathode catalyst, the Co3O4/Super P (SP) electrode exhibited excellent cycle performance, resulting in high capacity and long life of lithium-air batteries.

Syntheses And Electrochemical Performances Of Li4Ti5O12 Anode Materials For Lithium Ion Battery, Yong-Long Zhang, Xue-Bu Hu, Yao-Qiong Wang, Dong-Hai Huang

Journal of Electrochemistry

Series of spinel lithium titanate (Li₄Ti₅O₁₂) materials were synthesized by one-step solid-state reaction using lithium acetate and TiO₂ as raw materials under different temperatures (750/800/850 °C) and atmospheres (N₂/air). The as-prepared Li₄Ti₅O₁₂ materials were investigated by thermogravimetric analysis, X-ray diffraction, scanning electron microscopy, cyclic voltammotry and charge-discharge test to analyze their crystal structures, microstructures and electrochemical performances. The results show that the Li₄Ti₅O₁₂（L-800N）material obtained at 800 °C under nitrogen atmosphere exhibited better electrochemical performance and smaller particle size. The initial …

Model-Based Condition Monitoring And Power Management For Rechargeable Electrochemical Batteries, Taesic Kim

School of Computing: Dissertations, Theses, and Student Research

Rechargeable multicell batteries have been used in various electrical and electronic systems, e.g., renewable energy systems, electric-drive vehicles, commercial electronics, etc. However, there are still concerns about the reliability and performance degradation of rechargeable batteries caused by low thermal stability and the aging process. A properly designed battery management system (BMS) is required for condition monitoring and control of multicell batteries to ensure their safety, reliability, and optimal performance. The goal of this dissertation research was to develop a novel BMS for rechargeable multicell batteries.

First, this research developed high-fidelity battery models for online condition monitoring and power management of …

Secondary Re-Use Of Batteries From Electric Vehicles For Building Integrated Photo-Voltaic (Bipv) Applications, Fintan Mcloughlin, Michael Conlon

Reports

PV Crops is evaluating the use of battery technologies such as Vanadium Redox within Building Integrated Photovoltaic (BIPV) applications. However, their inclusion into BIPV systems will inevitably raise the overall costs of such systems. As a result, PV Crops is looking at other measures in parallel to help lower the costs associated with such systems. One particular area of interest is the potential secondary re-use of battery technology from Electric Vehicle (EV) market as a way of mitigating high costs of such systems as well as a means of encouraging battery recycling.

The global installed capacity for Photovoltaic’s (PV) connected …

Offshore Electrical Networks And Grid Integration Of Wave Energy Converter Arrays - Techno-Economic Optimisation Of Array Electrical Networks, Power Quality Assessment, And Irish Market Perspectives, Fergus Sharkey

Doctoral

Wave energy is an emerging industry and faces many challenges before commercial wave energy converter (WEC) arrays are installed. One of these challenges is the grid integration of WEC arrays. This includes offshore electrical networks, grid compliance, and access to electrical markets. This must be achieved in a technically viable manner and also at an acceptable cost. As electrical networks are expected to make up a large proportion of the overall WEC array CAPEX, perhaps up to 25%, this area is critical to the long term competitiveness of wave energy.

The objectives of this thesis are to develop technically and …

Data Cleaning In The Energy Domain, Hermine Nathalie Akouemo Kengmo Kenfack

Dissertations (1934 -)

This dissertation addresses the problem of data cleaning in the energy domain, especially for natural gas and electric time series. The detection and imputation of anomalies improves the performance of forecasting models necessary to lower purchasing and storage costs for utilities and plan for peak energy loads or distribution shortages. There are various types of anomalies, each induced by diverse causes and sources depending on the field of study. The definition of false positives also depends on the context. The analysis is focused on energy data because of the availability of data and information to make a theoretical and practical …

Load Frequency Control Of Battery Based Energy Storages, Neeru Saini

Theses and Dissertations

This work is the study of potential applications of battery-based energy storages in the power system so that the performance can be improved. The research is focused on the case where batteries are installed at the load side. Such a battery works like an energy buffer between power system and a load. It is possible to control the battery charging time based on the status of the power system operation and the state of charger of the battery so that the power flow in the power system can become more stable. The strategy of load frequency control (LFC) was investigated …

Vortex Identification In The Wake Of A Wind Turbine Array, Aleksandr Sergeyevich Aseyev

Dissertations and Theses

Vortex identification techniques are used to analyze the flow structure in a 4 x 3 array of scale model wind turbines. Q-criterion, Δ-criterion, and λ₂-criterion are applied to Particle Image Velocimetry data gathered fore and aft of the last row centerline turbine. Q-criterion and λ₂-criterion provide a clear indication of regions where vortical activity exists while the Δ-criterion does not. Galilean decomposition, Reynolds decomposition, vorticity, and swirling strength are used to further understand the location and behavior of the vortices. The techniques identify and display the high magnitude vortices in high shear zones resulting from the …

Global Time-Independent Agent-Based Simulation For Transactive Energy System Dispatch And Schedule Forecasting, Shawn Aaron Chandler

Dissertations and Theses

Electricity service providers (ESP) worldwide have increased their interest in the use of electrical distribution, transmission, generation, storage, and responsive load resources as integrated systems. Referred to commonly as "smart grid," their interest is driven by widespread goals to improve the operations, management and control of large-scale power systems. In this thesis I provide research into a novel agent-based simulation (ABS) approach for exploring smart grid system (SGS) dispatch, schedule forecasting and resource coordination. I model an electrical grid and its assets as an adaptive ABS, assigning an agent construct to every SGS resource including demand response, energy storage, and …

Microgrid Optimal Scheduling Considering Impact Of High Penetration Wind Generation, Abdulaziz Furreh Alanazi

Electronic Theses and Dissertations

The objective of this thesis is to study the impact of high penetration wind energy in economic and reliable operation of microgrids. Wind power is variable, i.e., constantly changing, and nondispatchable, i.e., cannot be controlled by the microgrid controller. Thus an accurate forecasting of wind power is an essential task in order to study its impacts in microgrid operation. Two commonly used forecasting methods including Autoregressive Integrated Moving Average (ARIMA) and Artificial Neural Network (ANN) have been used in this thesis to improve the wind power forecasting. The forecasting error is calculated using a Mean Absolute Percentage Error (MAPE) and …

Solar And Conservative Energy, Md Zahidur Rahman, Jonathan Anspike

Publications and Research

In the solar power and conservative energy, our basic mission was to build things that don’t use any sort of fuel that harms the environment. One of the most well-liked ways of conserving energy is using solar panels. Solar panels capture light, and transforms that light into electrical. The first objective in this research was to build an electric car that uses solar panels. To do so we connected a solar panel to a motor which rotates a series of gears that turns the wheels. We used a lot of sunlight though to power the motor enough were the gears …

A Clustering Approach To Domestic Electricity Load Profile Characterisation Using Smart Metering Data, Fintan Mcloughlin, Aidan Duffy, Michael Conlon

Articles

The availability of increasing amounts of data to electricity utilities through the implementation of domestic smart metering campaigns has meant that traditional ways of analysing meter reading information such as descriptive statistics has become increasingly difficult. Key characteristic information to the data is often lost, particularly when averaging or aggregation processes are applied. Therefore, other methods of analysing data need to be used so that this information is not lost. One such method which lends itself to analysing large amounts of information is data mining. This allows for the data to be segmented before such aggregation processes are applied. Moreover, …

Nanogrid Electrical Design And Analysis, Phillip Phung

Electrical Engineering

Power plant generators have quality protection over long-range transmission, but localized generation interacts with multiple power sources, and needs maintenance to ensure grid safety. Localized and distributed generation must solve these issues to remain viable economically and efficiently in power industries. Cal Poly’s Building 20 provides on-campus location to interconnect renewable generation with interconnection disconnect capabilities.

Cal Poly’s grid includes three localized generators flowing through the Cal Poly substation. Unlike other universities which use power from utilities across distant transmission lines, Cal Poly generates energy using onsite generators. Research including additional possible sites of power generation helps determine the effects …

A Study Of Decision Process In Mcdm Problems With Large Number Of Criteria, Jian Liu, Peng Liu, Si Feng Liu, Xian Zhong Zhou, Tao Zhang

Electrical and Computer Engineering Faculty Research & Creative Works

In this paper, an effective decision process method is proposed to address the challenge in a multiple criteria decision-making (MCDM) problem because of large number of criteria. This method is based on the criteria reduction, tolerance relation, and prospect theory (PT). By building a discernibility matrix for tolerance relation (DMTR) in an MCDM problem with numerical values or interval numbers, this method first allows us to recognize a set of critical criteria from a large criteria pool and ignore the other criteria. Next, it establishes the criteria weights through the DMTR as they are usually not indicated in the data. …

Hybrid Electric Power System Validation Through Parameter Optimization, Hasnaa Khalifi

Doctoral Dissertations and Master's Theses

Battery models can be developed from first principles or from empirical methods. The work presented in this thesis is semi-empirical, the model was validated using test data through parameter optimization. Simulink Parameter Estimation toolbox was used to identify the battery parameters and validate the battery model with test data. Experimental data was obtained by discharging the battery of a modified 2013 Chevrolet Malibu hybrid electric vehicle. The resulting battery model provided accurate simulation results over the validation data. For the constant current discharge, the mean squared error between measured and simulated data was 0.26 volts for the terminal voltage and …

Three-Phase Generation Using Reactive Networks, Tattiana Karina Coleman Davenport

Master's Theses

Household appliances utilize single-phase motors to perform everyday jobs whether it is to run a fan in an air conditioner or the compressor in a refrigerator. With the movement of the world going “green” and trying to make everything more efficient, it is a logical step to start with the items that we use every day. This can be done by replacing single-phase motors with three-phase motors in household appliances. Three-phase motors are 14% more efficient than single-phase motors when running at full load and typically cost less over a large range of sizes [1]. One major downside of incorporating …

Electrochemical Monitoring Of Cell Wall-Regulated Transient Extracellular Oxidative Burst From Single Plant Cells, Jun-Tao Liu, Yan-Ling Liu, Zhi Cheng, Shi-Jing Chen, Wei-Hua Huang

Journal of Electrochemistry

Oxidative burst by rapid, transient generation of reactive oxygen species (ROS) is a fundamental process for plant disease defense and signal transduction. ROS can be protective or toxic depending on their concentrations, and critical balance between ROS production and scavenging is regulated by complex and perfect mechanisms in plant cells. However, the process of rapid and transient ROS burst from plant cells and their regulatory mechanisms are far from being completely understood, owing to the methodological obstacles in real-time monitoring such a fast process. In this work, we showed the application of microelectrode electrochemistry with high spatiotemporal resolution to monitor …

An Enzymatic Ethanol/O2 Biofuel Cell Powered By Commercial Vodka Fuel, Yi-Ming Yan, Lan-Qun Mao

Journal of Electrochemistry

This study demonstrates the performance of a new type alcohol/O₂ biofuel cell assembled by using alcohol dehydrogenase (ADH) and bilirubin oxidase (BOD) as the biocatalysts of the bioanode and the biocathode for the bioelectrocatalytic oxidation of alcohol and reduction of oxygen, respectively. To construct the bioanode and the biocathode, single-walled carbon nanotubes (SWCNTs) were used. In the bioanode, SWCNTs were used as the supporting materials for both methylene green (MG) which was used as the electrocatalyst for the oxidation of NADH and ADH. The as-constructed MG/ADH/SWCNTs-based bioanode exhibits a good activity toward the bioelectrocatalytic oxidation of ethanol. In the …

Electrochemical Detection Of L-Cysteine Based On Iron Phthalocyanine/Nitrogen-Doped Graphene Modified Electrodes, Jing-Jing Xiao, Hui-Ying Xu, Li Xu, Bao-Hong Liu

Journal of Electrochemistry

In this study, we report a facile method to develop FePc/N-G hybrid modified electrode for the detection of L-cysteine. The electrochemical sensor was characterized by cyclic voltammetry and amperometric response. The sensor exhibited a wider linear range with rapid response which has outperformed pure FePc/GCE, highlighting the important role of nitrogen doped graphene as substrate for improving the electrochemical response property.