Power and Energy Commons^™

Mathematical Programming Approach For The Design Of Satellite Power Systems, Allen Flath Iii

Theses and Dissertations--Electrical and Computer Engineering

Satellite power systems can be understood as islanded dc microgrids supplied by specialized and coordinated solar cell arrays augmented by electrochemical battery systems to handle high-power loads and periods of eclipse. The periodic availability of power, the limited capacity of batteries, and the dependence of all mission service on power consumption create a unique situation in which temporal power and energy scarcity exist. A multi-period model of an orbital satellite power system’s performance over a mission’s duration can be constructed. A modular power system architecture is used to characterize the system’s constraints. Using mathematical programming, an optimization problem can be …

Estimation Of Transmission Line Parameters Using Linear Method With Synchronized And Unsynchronized Data, Mustafa Lahmar

Theses and Dissertations--Electrical and Computer Engineering

Accurate value of transmission line parameters is important for power system protection applications, especially for distance relays whose zone settings are based on positive sequence line impedance. The research is devoted to estimating transmission line positive-sequence parameters from synchronized or unsynchronized measurements of voltage and current phasors that are obtained at both terminals of the line. The positive sequence parameters including series impedance and shunt admittance can be linearly estimated. The linear least square algorithm has been derived in this dissertation for different transmission line configurations. The algorithm is able to handle both synchronized and unsynchronized measurements and deal with …

Optimal Distribution Feeder Reconfiguration With Distributed Generation Using Intelligent Techniques, Ahmad Ghaweta

Theses and Dissertations--Electrical and Computer Engineering

Feeder reconfiguration is performed by changing the open/close status of two types of switches: normally open tie switches and normally closed sectionalizing switches. A whole feeder or part of a feeder may be served from another feeder by closing a tie switch linking the two while an appropriate sectionalizing switch must be opened to maintain the radial structure of the system. Feeder reconfiguration is mainly aiming to reduce the system overall power losses and improve voltage profile. In this dissertation, several approaches have been proposed to reconfigure the radial distribution networks including the potential impact of integrating Distributed Energy Resources …

Curricular Optimization: Solving For The Optimal Student Success Pathway, William G. Thompson-Arjona

Theses and Dissertations--Electrical and Computer Engineering

Considering the significant investment of higher education made by students and their families, graduating in a timely manner is of the utmost importance. Delay attributed to drop out or the retaking of a course adds cost and negatively affects a student’s academic progression. Considering this, it becomes paramount for institutions to focus on student success in relation to term scheduling.

Often overlooked, complexity of a course schedule may be one of the most important factors in whether or not a student successfully completes his or her degree. More often than not students entering an institution as a first time full …

Advanced Fault Area Identification And Fault Location For Transmission And Distribution Systems, Wen Fan

Theses and Dissertations--Electrical and Computer Engineering

Fault location reveals the exact information needed for utility crews to timely and promptly perform maintenance and system restoration. Therefore, accurate fault location is a key function in reducing outage time and enhancing power system reliability.

Modern power systems are witnessing a trend of integrating more distributed generations (DG) into the grid. DG power outputs may be intermittent and can no longer be treated as constants in fault location method development. DG modeling is also difficult for fault location purpose. Moreover, most existing fault location methods are not applicable to simultaneous faults. To solve the challenges, this dissertation proposes three …

Fault Location Techniques Using The Traveling Wave Method And The Discrete Wavelet Transform, Wesley Fluty

Theses and Dissertations--Electrical and Computer Engineering

Fault location within electric power systems is an important topic that helps reduce outage duration and increases reliability of the system. This paper explores the topic of fault location using traveling waves generated by fault conditions and the discrete wavelet transform used for time-frequency analysis. The single-ended and double-ended traveling wave methods are presented and evaluated on a single circuit and double circuit 500kV system modeled using MATLAB SIMULINK. Results are compared on the basis of wavelet used for analysis, sampling rate, and fault resistance.

Optimum Design Of Axial Flux Pm Machines Based On Electromagnetic 3d Fea, Narges Taran

Theses and Dissertations--Electrical and Computer Engineering

Axial flux permanent magnet (AFPM) machines have recently attracted significant attention due to several reasons, such as their specific form factor, potentially higher torque density and lower losses, feasibility of increasing the number of poles, and facilitating innovative machine structures for emerging applications. One such machine design, which has promising, high efficiency particularly at higher speeds, is of the coreless AFPM type and has been studied in the dissertation together with more conventional AFPM topologies that employ a ferromagnetic core.

A challenge in designing coreless AFPM machines is estimating the eddy current losses. This work proposes a new hybrid analytical …

Contributions To Hybrid Power Systems Incorporating Renewables For Desalination Systems, Nasser Alawhali

Theses and Dissertations--Electrical and Computer Engineering

Renewable energy is one of the most reliable resource that can be used to generate the electricity. It is expected to be the most highly used resource for electricity generation in many countries in the world in the next few decades. Renewable energy resources can be used in several purposes. It can be used for electricity generation, water desalination and mining. Using renewable resources to desalinate the water has several advantages such as reduce the emission, save money and improve the public health. The research described in the thesis focuses on the analysis of using the renewable resources such as …

Economic Operation Of Typical Microgrids, Yuanzhen Guo

Theses and Dissertations--Electrical and Computer Engineering

A microgrid is a subnetwork of power system that consists of a group of distributed energy sources and loads. It is designed to integrate distributed generation, loads, energy storage devices, converters, and monitoring and protection devices. Generally, a successful microgrid could run both in island mode (off-grid) and in grid-connected mode (on-grid), being able to convert between two modes at any time. With continuous development of the power system, distributed renewable generation unit accounts for an increasing proportion, since microgrid could effectively connect these generation units to the main grid, thereby improving the energy efficiency and the energy structure. Microgrid …

Stability Analysis And Design Of A Tracking Filter For Variable Frequency Applications, Pranav Aramane

Theses and Dissertations--Electrical and Computer Engineering

The work presented in this thesis is a frequency adaptive tracking filter that can be used in exact tracking of power frequencies and rejection of unwanted harmonics introduced during power disturbances. The power synchronization process includes power converters and other equipment that have many non-linear components that introduce unwanted harmonics. This new design is motivated by the requirement of a filter that can filter all the harmonics and exactly track a rapidly varying fundamental frequency with little time delay and phase error. This thesis analyzes the proposed filter mathematically based on Lyapunov theory and simulations are presented to show the …

Distribution System Optimization With Integrated Distributed Generation, Sarmad Khaleel Ibrahim

Theses and Dissertations--Electrical and Computer Engineering

In this dissertation, several volt-var optimization methods have been proposed to improve the expected performance of the distribution system using distributed renewable energy sources and conventional volt-var control equipment: photovoltaic inverter reactive power control for chance-constrained distribution system performance optimisation, integrated distribution system optimization using a chance-constrained formulation, integrated control of distribution system equipment and distributed generation inverters, and coordination of PV inverters and voltage regulators considering generation correlation and voltage quality constraints for loss minimization. Distributed generation sources (DGs) have important benefits, including the use of renewable resources, increased customer participation, and decreased losses. However, as the penetration level …

A Fault Location Algorithm For Unbalanced Distribution System Without Fault Type Information, Yizhe Li

Theses and Dissertations--Electrical and Computer Engineering

Power system faults normally result in system damage, profit loss and consumer dissatisfaction. Consequently, there is a strong demand on precise and fast fault location estimation for power system to minimize the system restoration time.

This paper examines a method to locate short-circuit faults on a distribution system with unbalanced loads without fault type information. Bus impedance matrix technique was harnessed in the fault location estimation algorithm. The system data including line impedances, source impedance and distribution system layout was assumed to be known factors, hence pre-fault bus impedance can be calculated and implemented into the algorithm. Corresponding methods to …

Intelligent Methods For Optimum Online Adaptive Coordination Of Overcurrent Relays, Ke Xu

Theses and Dissertations--Electrical and Computer Engineering

During the operation in a modern power distribution system, some abnormal events may happen, such as over-voltage, faults, under-frequency and overloading, and so on. These abnormal events may cause a power outage in a distribution system or damages on the equipment in a distribution system. Hence these abnormal events should be identified and isolated by protection systems as quickly as possible to make sure we can maintain a stable and reliable distribution system to supply adequate electric power to the largest number of consumers as we can. To sum up, we need stable and reliable protection systems to satisfy this …

Advanced Synchronous Machine Modeling, Yuqi Zhang

Theses and Dissertations--Electrical and Computer Engineering

The synchronous machine is one of the critical components of electric power systems. Modeling of synchronous machines is essential for power systems analyses. Electric machines are often interfaced with power electronic components. This work presents an advanced synchronous machine modeling, which emphasis on the modeling and simulation of systems that contain a mixture of synchronous machines and power electronic components. Such systems can be found in electric drive systems, dc power systems, renewable energy, and conventional synchronous machine excitation. Numerous models and formulations have been used to study synchronous machines in different applications. Herein, a unified derivation of the various …

Fault Location In Transmission Systems Using Synchronized Measurements, Xiangqing Jiao

Theses and Dissertations--Electrical and Computer Engineering

Compared with conventional measurements from supervisory control and data acquisition (SCADA) system, phasor measurement units (PMUs) provide time-synchronized and direct measurements of phasors. The availability of synchronized phasor measurements can significantly improve power system protection and analysis. This dissertation is specifically committed to using synchronized measurements for estimation of fault locations in transmission systems.

Transmission lines are prone to various short-circuit faults. Accurate fault location is critical for rapid power recovery. Chapter 2 proposes a new fault location method based on sparse wide area measurements. One distinguishing feature of this method is its applicability to both transposed and untransposed transmission …

Analysis And Simulation Of Photovoltaic Systems Incorporating Battery Energy Storage, Oluwaseun M. Akeyo

Theses and Dissertations--Electrical and Computer Engineering

Solar energy is an abundant renewable source, which is expected to play an increasing role in the grid's future infrastructure for distributed generation. The research described in the thesis focuses on the analysis of integrating multi-megawatt photovoltaics (PV) systems with battery energy storage into the existing grid and on the theory supporting the electrical operation of components and systems. The PV system is divided into several sections, each having its own DC-DC converter for maximum power point tracking and a two-level grid connected inverter with different control strategies. The functions of the battery are explored by connecting it to the …

Improvements In Inverter Modeling And Control, Xiao Liu

Theses and Dissertations--Electrical and Computer Engineering

In this dissertation, the generalized averaging method models for inverters, reactive power control methods for photovoltaic inverters, and a noise immunity improvement for hybrid position observers for brushless dc motor drives are studied.

Models of inverters and other converters based on averaging have been widely used in numerous simulation applications. Generalized averaging can be applied to model both average and switching behavior of converters while retaining the faster run times associated with average-value models. Herein, generalized average models for single- and three-phase pulse width modulation inverters are proposed. The modulation signal for the proposed model could be either a sinusoidal …

Cable Sizing And Its Effect On Thermal And Ampacity Values In Underground Power Distribution, Obinna E. Igwe

Theses and Dissertations--Electrical and Computer Engineering

Over the past decade, underground power distribution has become increasingly popular due to its reliability, safety, aesthetic characteristics, as well as the ever increasing focus on the environmental impacts of the various stages of power generation and distribution. With the technological advances in this area, the process of running these cables have become more economical and efficient.

This thesis explores the practice of grouping multiple three phase cables in a common conduit, using the duct bank process, and analyzes the thermal and ampacity consequences on the individual lines. This analysis is done in an effort to better define and understand …

Market Based Control Of Pv Inverters In A Distribution System, Kumar Rishikesh

Theses and Dissertations--Electrical and Computer Engineering

A growing energy crisis, a rapid climate change, and a constant depletion of fossil fuel necessitates the role of renewable energy resources like PV (Photovoltaics) and wind energy to form a group of distributed sources of generation. These circumstances promote the use of renewable resources meeting the environmental commitments in terms of checking pollution and toxic footprints. A group of PV and wind energy generation units may work together as micro players to form smart grid systems and participate in an existing distribution system to meet a portion of the daily energy demand. This will help in minimizing the network …

Genetic Algorithms In Stochastic Optimization And Applications In Power Electronics, Mengmei Liu

Theses and Dissertations--Electrical and Computer Engineering

Genetic Algorithms (GAs) are widely used in multiple fields, ranging from mathematics, physics, to engineering fields, computational science, bioinformatics, manufacturing, economics, etc. The stochastic optimization problems are important in power electronics and control systems, and most designs require choosing optimum parameters to ensure maximum control effect or minimum noise impact; however, they are difficult to solve using the exhaustive searching method, especially when the search domain conveys a large area or is infinite. Instead, GAs can be applied to solve those problems. And efficient computing budget allocation technique for allocating the samples in GAs is necessary because the real-life problems …

Mathematical Model For Current Transformer Based On Jiles-Atherton Theory And Saturation Detection Method, Xiang Li

Theses and Dissertations--Electrical and Computer Engineering

Current transformer saturation will cause the secondary current distortion. When saturation occurs, the secondary current will not be linearly proportional to the primary current, which may lead to maloperation of protection devices. This thesis researches and tests two detecting methods: Fast Fourier Transform (FFT) and Wavelet Transform based methods. Comparing these two methods, FFT has a better performance in steady state saturation, and Wavelet Transform can determine singularity to provide the moment of distortion.

The Jiles-Atherton (J-A) theory of ferromagnetic hysteresis is one approach used in electromagnetics transient modeling. With decades of development, the J-A model has evolved into different …

Single Phase Multilevel Inverter For Grid-Tied Photovoltaic Systems, Martin Edward Prichard

Theses and Dissertations--Electrical and Computer Engineering

Multilevel inverters offer many well-known advantages for use in high-voltage and high-power applications, but they are also well suited for low-power applications. A single phase inverter is developed in this paper to deliver power from a residential-scale system of Photovoltaic panels to the utility grid. The single-stage inverter implements a novel control technique for the reversing voltage topology to produce a stepped output waveform. This approach increases the granularity of control over the PV systems, modularizing key components of the inverter and allowing the inverter to extract the maximum power from the systems. The adaptive controller minimizes harmonic distortion in …

Design Of Energy Storage Controls Using Genetic Algorithms For Stochastic Problems, Si Chen

Theses and Dissertations--Electrical and Computer Engineering

A successful power system in military applications (warship, aircraft, armored vehicle etc.) must operate acceptably under a wide range of conditions involving different loading configurations; it must maintain war fighting ability and recover quickly and stably after being damaged. The introduction of energy storage for the power system of an electric warship integrated engineering plant (IEP) may increase the availability and survivability of the electrical power under these conditions. Herein, the problem of energy storage control is addressed in terms of maximizing the average performance. A notional medium-voltage dc system is used as the system model in the study. A …

Stargrazer One: A New Architecture For Distributed Maximum Power Point Tracking Of Solar Photovoltaic Sources, Edgard Munoz-Coreas

Theses and Dissertations--Electrical and Computer Engineering

The yield from a solar photovoltaic (PV) source is dependent on factors such as light and temperature. A control system called a maximum power point tracker (MPPT) ensures that the yield from a solar PV source is maximized in spite of these factors. This thesis presents a novel implementation of a perturb and observe (PO) MPPT.

The implementation uses a switched capacitor step down converter and a custom digital circuit implementation of the PO algorithm. Working in tandem, the switched capacitor step down converter and the custom digital circuit implementation were able to successfully track the maximum power point of …

Nanostructured Semiconductor Device Design In Solar Cells, Hongmei Dang

Theses and Dissertations--Electrical and Computer Engineering

We demonstrate the use of embedded CdS nanowires in improving spectral transmission loss and the low mechanical and electrical robustness of planar CdS window layer and thus enhancing the quantum efficiency and the reliability of the CdS-CdTe solar cells. CdS nanowire window layer enables light transmission gain at 300nm-550nm. A nearly ideal spectral response of quantum efficiency at a wide spectrum range provides an evidence for improving light transmission in the window layer and enhancing absorption and carrier generation in absorber. Nanowire CdS/CdTe solar cells with Cu/graphite/silver paste as back contacts, on SnO₂/ITO-soda lime glass substrates, yield the …

A New Islanding Detection Method Based On Wavelet-Transform And Ann For Inverter Assisted Distributed Generator, Zhengyuan Guan

Theses and Dissertations--Electrical and Computer Engineering

Nowadays islanding has become a big issue with the increasing use of distributed generators in power system. In order to effectively detect islanding after DG disconnects from main source, author first studied two passive islanding methods in this thesis: THD&VU method and wavelet-transform method. Compared with other passive methods, each of them has small non-detection zone, but both of them are based on the threshold limit, which is very hard to set. What’s more, when these two methods were applied to practical signals distorted with noise, they performed worse than anticipated.

Thus, a new composite intelligent based method is presented …

Average-Value Modeling Of Hysteresis Current Control In Power Electronics, Hanling Chen

Theses and Dissertations--Electrical and Computer Engineering

Hysteresis current control has been widely used in power electronics with the advantages of fast dynamic response under parameter, line and load variation and ensured stability. However, a main disadvantage of hysteresis current control is the uncertain and varying switching frequency which makes it difficult to form an average-value model. The changing switching frequency and unspecified switching duty cycle make conventional average-value models based on PWM control difficult to apply directly to converters that are controlled by hysteresis current control.

In this work, a new method for average-value modeling of hysteresis current control in boost converters, three-phase inverters, and brushless …

Compensation Methods For Demand Response, Zhaofeng Wang

Theses and Dissertations--Electrical and Computer Engineering

Recently, more and more disputations about how demand response should be compensated have arisen. Moreover, the court is about to rehear the Order 745. It probably will have significant impact on the whole working system used to be built for demand response before. Nowadays, some power companies and utilities think that they will endure profits leakage while demand response resources still are compensated.

In this research, knowledge of demand response, local marginal price, Order 745 and other related concept will be explained in detail in case of misunderstanding. Associated with all these knowledge, a possible compensation method will be proposed. …

Fault Location Algorithms, Observability And Optimality For Power Distribution Systems, Wanjing Xiu

Theses and Dissertations--Electrical and Computer Engineering

Power outages usually lead to customer complaints and revenue losses. Consequently, fast and accurate fault location on electric lines is needed so that repair work can be carried out as fast as possible.

Chapter 2 describes novel fault location algorithms for radial and non-radial ungrounded power distribution systems. For both types of systems, fault location approaches using line to neutral or line to line measurements are presented. It’s assumed that network structure and parameters are known, so that during-fault bus impedance matrix of the system can be derived. Functions of bus impedance matrix and available measurements at substation are formulated, …

Prediction Model To Estimate The Zero Crossing Point For Faulted Waveforms, Md. Shakawat Hossan

Theses and Dissertations--Electrical and Computer Engineering

In any power system, fault means abnormal flow of current. Insulation breakdown is the cause of fault generation. Different factors can cause the breakdown: Wires drifting together in the wind, Lightning ionizing air, wires with contacts of animals and plants, Salt spray or pollution on insulators. The common type of faults on a three phase system are single line-to-ground (SLG), Line-to-line faults (LL), double line-to-ground (DLG) faults, and balanced three phase faults. And these faults can be symmetrical (balanced) or Unsymmetrical (imbalanced).In this Study, a technique to predict the zero crossing point has been discussed and simulated. Zero crossing point …