Power and Energy Commons^™

Monte Carlo Analysis Of Millimeter-Wave Gan Based Gunn Effect Oscillators, Sridhara Viswanadham

Electrical & Computer Engineering Theses & Dissertations

Gunn diodes are one of the most common high frequency solid-state oscillators at the present time, and are considered as promising devices for millimeter and submillimeter wave applications. Monte Carlo studies of Gunn diodes based on bulk wurtzite GaN have been carried out in this thesis research. Two structures have been examined: (i) devices with conventional single notch structure and (ii) repetitive structures with serial segments to fashion a "multiple domain" device. Wurtzite GaN has been chosen because of the high drift velocity and because analytical expressions for the band structure have recently become available. Performance parameters of interest such …

A Compact Ozone Differential Absorption Lidar (Dial) Transmitter Using A Solid-State Dye Polymer, Alton L. Jones Jr.

Electrical & Computer Engineering Theses & Dissertations

The measurement of atmospheric ozone is important because in the troposphere it is a pollutant that is toxic to living systems, but in the stratosphere ozone protects life by shielding us from the sun's harmful UV-B radiation.

Laser remote sensing from aircraft using differential absorption lidar (DIAL) has become a very important technique for measuring atmospheric ozone at different altitudes and locations. Current aircraft-based DIAL systems use pulsed Nd:YAG pumped liquid dye lasers, which are then frequency doubled into the UV region, to probe both the stratosphere and troposphere for ozone.

This thesis describes a new potential DIAL laser transmitter …

Field Enhancement In Silicon Nanotip Field Emitter Arrays, Ajith Varghese

Electrical & Computer Engineering Theses & Dissertations

No abstract.

Development And Testing Of An Ac Micro Hollow Cathode Simulator, Thomas E. Caldwell

Electrical & Computer Engineering Theses & Dissertations

The use of AC source plasma discharge devices in applications such as material processing and film deposition has increased in recent years due to improvements in discharge efficiency made possible by devices such as the micro hollow cathode. Designing hollow cathodes for specific applications requires an understanding of the processes that govern the discharge. Simulation is an inexpensive tool for understanding hollow cathode operation and optimizing the device for specific applications. This thesis describes the development of an AC micro hollow cathode simulator. It details the theoretical models used in the simulation and presents the results of test cases intended …

Two Dimensional, Time Dependent Modeling And Simulation Of Semi-Insulating Gaas High-Power Photoconductive Switches, Prakasit Kayasit

Electrical & Computer Engineering Theses & Dissertations

The current-voltage (I-V) characteristics and photoconductive behavior of semi-insulating GaAs (SI GaAs) high-power switches have been investigated by using a two-dimensional, time dependent, drift diffusion transport model. The dc current-voltage behavior as predicted by the results of this model was compared with available experimental data to evaluate the accuracy and validity of the model. The results show very good agreement, Next, research was carried out to investigate the behavior of the switches under high-field operation.

Simulations at high voltages emphasize on the two following processes: (a) The mechanism of impact ionization and the effect of this mechanism on device stability …

Electrical Characteristics And Parallel Operation Of Microhollow Cathode Discharges, Wenhui Shi

Electrical & Computer Engineering Theses & Dissertations

This thesis describes the electrical properties of microhollow cathode discharges with argon as filling gas. The appearance and current-voltage characteristics of microhollow cathode discharges have been recorded. Three kinds of discharge modes (predischarge, hollow cathode discharge and abnormal discharge) have been observed. The range of operation of the hollow cathode discharge has been found to be 0.5 < pD & 5 Torr cm in argon. By reducing the hole diameter to 100 pm, we were able to operate the discharge to atmospheric pressure in a dc mode. The possibility of dc parallel operation of microhollow cathode discharges was explored. Parallel operation could be obtained without individual ballast for discharges with a positive I-V slope greater than 10 V/mA over a voltage range of more than 5 % of the sustaining voltage. For parallel operation outside the range the ballasting is required. This model was explored by using a segmented anode model. The result of the simple calculation coincides well with the experiment result, where a semi-insulator silicon was used as distributed ballast.

Two-Dimensional Drift-Diffusion Simulations Of Silicon Avalanche Shaper (Sas) Devices For High Power Applications, Hamid Jalali

Electrical & Computer Engineering Theses & Dissertations

Silicon Avalanche Shaper devices have been projected as being important components of an inexpensive, semiconductor-based technology for high power switching applications. The primary advantage of this technology is that it is based on Silicon material which is easy to fabricate and has a well established processing technology. Unlike other high power technologies, the SAS devices do not rely on external optical triggering which eliminates the need for lasers and related optical circuitry.

The SAS based high power switching technology has been pioneered and tested by a Russian group. Though preliminary results have been very encouraging, the device reliability and its …

An Artificial Neural Approach To The Decomposition Problem, Chandrashekar L. Masti

Electrical & Computer Engineering Theses & Dissertations

The goal of this thesis is to develop an artificial neural approach toward addressing the intractability involved with the decomposition problem. The search for the lattice of substitution property (s. p.) partitions essential to decompositions is cast into the framework of constraint satisfaction. An artificial neural network is developed to provide solutions by performing optimization of a mathematically derived objective function over the problem space. The issue of transitivity is verified to belong to a class of problems beyond the scope of solvability for conventional quadratic-order constraint satisfaction neural networks. A theorem is stated and proved establishing that third-order correlations …

Analysis And Development Of A Switched Capacitor Power Supply, John Richard Hackworth

Electrical & Computer Engineering Theses & Dissertations

The combination of a switched capacitor network and switching power supply techniques can result in a transformer less regulated DC power supply that is small, relatively simple, and efficient. In addition, the output of such a system could be operated over a wide range of common mode voltages. Multiple switched capacitor supplies could be stacked to achieve voltage multiplication.

Although the output of a system of this type is a continuous function, the internal operation must be analyzed in finite time elements. This numerical analysis will be shown in both a mathematical approach and a computer model.

The Influence Of Transverse Magnetic Fields On The Current-Voltage Characteristics Of Glow Discharges, Thomas J. Powers

Electrical & Computer Engineering Theses & Dissertations

In low pressure discharges, operated in electronegative gas mixtures to the right of the Paschen curve minimum, the discharge resistance can be increased by application of transverse magnetic fields. In this range of operation, both the mean free path and the larmor radius are small compared to the discharge dimensions. The relationship between the electric field and the magnetic field is therefore controlled by electron- molecule collisional processes. Specifically, the magnetically induced increase in the discharge resistance is caused by a downward shift of the electron energy distribution which leads to an increase in attachment and a reduction in ionization. …

An Investigation Of Overvoltage Effects On A Gas-Blown Spark Gap, Michael Steven Mazzola

Electrical & Computer Engineering Theses & Dissertations

This experimental investigation addresses the anomalous overvoltage breakdown and subsequent recovery characteristics observed in gas-blown spark gaps. Previous investigations have reported a two-stage recovery process in self-break, pulse-charged, gas-blown spark gape in which the spark gap recovers first to an intermediate breakdown strength before recovering to the undisturbed breakdown voltage. The recovery process has been explained in terms of two different characteristic times. The first is that required to obtain initial recovery in which the spark gap regains its intrinsic breakdown strength. The second time is that required to obtain final recovery in which the pulse-charged spark gap regains the …

A Frequency Domain Digital Signal Processor For Laser Velocimeter Systems, Andreas Evangelos Savvakis

Electrical & Computer Engineering Theses & Dissertations

A new signal processor for laser velocimeter systems is proposed. The proposed processor incorporates automatic initialization, real time operation, and can efficiently process input signals comprised of as low as 150 photons, with mean oscillation frequency up to 100 MHZ, and input turbulence from 0 to 20%. A bank of digital bandpass filters is employed for the energy spectrum estimation of the input signal. A deterministic model is developed to describe the relationship between the filter output energies and the input signal parameters. The input frequency is estimated by linearly weighting the filter output energies. A spline function approximation approach …

Laser Pump And Probe Excited State Absorption Measurements, Shawpin Jong

Electrical & Computer Engineering Theses & Dissertations

A pump and probe technique was used to investigate triplet-triplet excited state absorption in solutions of the scintillators 2,5 diphenyloxazole (PPO) and 2,1 naphthyl,5 phenylzole (a-NPO) in several solvents.

KrF excimer radiation (248 nm) was used to pump the samples under investigation as well as a tunable dye laser which was used as the probe. Time-resolution was obtained by changing the optical path difference between the pump and probe beams.

Transient excited state absorption was measured in a wide spectral region between 330 nm and 600 nm, showing a peak at 400 nm for PPO solutions, and two …

A 250-Kv Two-Pulse Modulator For The Gas Flow Switch Test Facility, David Michael Barrett

Electrical & Computer Engineering Theses & Dissertations

High-pressure spark gap switches are often used in pulsed power systems because of their high power capabilities. Unfortunately, these switches cannot be operated at high repetition rates because of the time required for the switch to recover. However, the recovery rate of a spark gap may be improved by flowing a gas through the interelectrode region so as to remove the hot gases and debris.

A test facility has been designed and constructed at Old Dominion University to evaluate the performance of gas-flow spark gap switches operating over a wide range of voltages and flow parameters. The facility consists of …

A Plasma Focus Interrupting Switch, Gregory Francis Knapp

Electrical & Computer Engineering Theses & Dissertations

The feasibility of using a dense plasma focus (DPF) as a current interrupting device has been investigated. Specifically, a 34-kJ, Mather-type DPF was modified to accept a third electrode so that a discharge could be created between this electrode and the center electrode of the DPF by a 10-kJ inductive energy storage circuit. It was anticipated that the accelerating mechanisms of the DPF pinch, which are known to cause a rapid reduction in the DPF current, would interrupt the 1-kA to 10-kA secondary discharge current thus forcing the secondary current through an external load and hence result in power amplification. …