Power and Energy Commons^™

Protection And Disturbance Mitigation Of Next Generation Shipboard Power Systems, Marounfa Djibo

Electrical & Computer Engineering Theses & Dissertations

Today, thanks to modern advances mainly in the power electronics field, megawatt-level electric drives and magnetic levitation are being integrated into the marine power grids. These technologies operate based on Direct Current (DC) power which require Alternating Current (AC) to DC conversion within the current grid. Medium-voltage Direct Current (MVDC) and Flywheel Energy Storage Systems (FESS) are the next state-of-the-art technologies that researchers are leaning on to produce, convert, store, and distribute power with improved power quality, reliability, and flexibility. On the other hand, with the extensive integration of high-frequency power electronic converters, system stability analysis and the true system …

Specification, Control, And Applications Of Z-Source Circuit Breakers For The Protection Of Dc Power Networks, Sagar Bhatta

Electrical & Computer Engineering Theses & Dissertations

There is a highly-increasing demand for the DC power transmission and distribution in modern power systems for the integration of newly-installed renewable energy resources and storage systems to the existing utilities. Application of DC power systems in electric ships, battery energy devices, high-voltage DC networks, smart grids, electric vehicles, microgrids, and wind farms is a recent trend that is being highly investigated. The fault protection of DC systems is an essential but challenging issue that needs careful attention to maintain system operation reliability and device safety. In this research, the specification, control, and application of Z-source breakers (ZCBs) are investigated …

Effect Of Grain Size And Interface Engineering On The Photovoltaic Performance And Stability Of Perovskite Solar Cells, Abdullah Al Mamun

Electrical & Computer Engineering Theses & Dissertations

Organic-inorganic halide perovskite solar cells (PSCs) have grown rapidly in recent years due to their outstanding optoelectronic properties, high efficiency, and low-cost. However, this emerging solar cell technology is experiencing some challenges such as defects, hysteresis, and long-term stability, which need to be addressed in order to make it commercially available. This dissertation aims to assist in overcoming some of the barriers and is therefore important to the field of perovskite solar cells.

Initially, this dissertation focuses on investigating the role of grain interiors (GIs) and grain boundaries (GBs) of perovskite film using chemically, spatially, and temporally resolved measurements at …

New Method Of Nickel Oxide As Hole Transport Layer And Characteristics Of Nickel Oxide Based Perovskite Solar Cell, Loi Nguyen

Electrical & Computer Engineering Theses & Dissertations

For perovskite solar cells, poly (2,3-dihydrothieno-1, 4-dioxin)-poly (styrenesulfonate) (PEDOT:PSS) is a common hole transport layer. However, PEDOT:PSS has a lot of drawbacks, such as irregular quality from distributors, poor electron blocker, and hygroscopic nature. On the other hand, NiOx has been reported that it can provide good stability and carrier mobility. From literature, NiOx was used to replace PEDOT:PSS as a hole transport layer with positive results since it is transparent as a thin film and also possesses compatible work function in perovskite solar cell bandgap alignment. In depositing NiOx as a thin film, many approaches have been developed. However, …

A Novel Power Sharing Control Method For Distributed Generators In Dc Networks, Christina James

Electrical & Computer Engineering Theses & Dissertations

The power sharing control method is a desirable solution to integrate multiple renewable energy generators into the grid and to keep them working synchronously. Power sharing control between different distributed generators is an important consideration for the stabilized operation of the power grid network. In this thesis work, a novel method is used with the concept of droop control technique and is designed to control power from each individual generator in DC network particularly. The proposed power sharing control method can be widely applied to grid connected network and to islanded power grid network for obtaining high efficiency of power …

Study Of Modified Deposition Process For Cu(In,Ga)Se2 Solar Cell Back Contact, Tasnuva Ashrafee

Electrical & Computer Engineering Theses & Dissertations

As the worldwide demand for renewable energy is increasing, growth of the global share of alternative energy sources would improve overall energy security as well as bring environmental benefits. So far, solar cells - the devices that convert direct sunlight into electricity - are dominated by silicon devices. Another alternative is thin film solar cell, whose main inspiration is to reduce the electricity production cost. Cu(In, Ga)Se₂ (CIGS) solar cells are considered to have a great prospective because of reduced material and energy consumption during manufacturing. Many CIGS solar cell manufacturers are already exhibiting GW-scale production capacity. With the …

Deposition Of Silicon Thin Films By Ion Beam Assisted Deposition, Tejaswini Miryala

Electrical & Computer Engineering Theses & Dissertations

With the depletion of non-renewable energy sources owing to increasing demands, we need to develop renewable energy sources, which can replace them with cleaner energy sources. The solar industry is one of these renewable energies. In spite of having very high potential, harvesting solar energy has been a challenge due to the cost of solar cells. Silicon dominates the photovoltaic industry, but even this technology can accommodate great improvements. This can be done notably by finding low cost deposition techniques for the silicon. The main aim of this thesis is to form high-quality nanocrystalline silicon thin films with the help …

Modification Of Deposition Process Parameters For Uniform Indium Layer Deposition, Isaac Butt

Electrical & Computer Engineering Theses & Dissertations

The need for more efficient light to energy converting cells has long been a subject of research and development. With abundant availability of solar energy that the earth receives, the photovoltaic industry has sought materials that could serve the purpose of great energy conversion. The photovoltaic industry is mainly dominated by Silicon owing to its abundant availability, reliability and economic cost. However, due to limitations on efficiency improvements, some focus has shifted toward III-V based solar cells with a great potential for attaining higher efficiency and multi-junction applications. However, the cost of the III-V materials is extremely high due to …

A Study Of The Sensitivity Of Energy Conversion Efficiency To Load Variation In Class-E Resonant Power Inverter, Richard Samuel Jennings

Electrical & Computer Engineering Theses & Dissertations

In this thesis the sensitivity of energy conversion efficiency (ECE) and output power of a class-E resonant inverter under variable resistive and inductive load assignments is examined for wireless power transfer (WPT) applications. By performing simulation and mathematical analysis, it was found that the on-resistance of the switching device has minor effect on the design’s efficiency. Additional comparisons between the simulation and mathematical analysis show reasonable output power and ECE load variation performance for the design, but with unique load impedances where zero voltage switching (ZVS) and zero derivative switching (ZDS) are achieved. These comparisons also expose inaccurate mathematical assumptions. …

Study Of A High-Efficient Wide-Bandgap Dc-Dc Power Converter For Solar Power Integration, Yashwanth Bezawada

Electrical & Computer Engineering Theses & Dissertations

This research focuses on the design and analysis of a Boost cascaded Buck-Boost (BoCBB) power converter with super high efficiency in electric power conversion. The BoCBB power converter is based on emerging wide-bandgap silicon-carbide (SiC) MOSFETs and Schottky diodes, which have only 1/6 times of power loss in traditional silicon power semiconductor devices. The BoCBB power converter can be widely applied in solar harvesting for the National Aeronautics and Space Administration (NASA), military bases and electric utilities, as well as high-power DC motor drives for the electric vehicles, robotics, and manufacturing and product lines.

This research analyzed the topology and …

Investigation Of Low Cost Substrate Approaches For Iii-V Solar Cells, Marlene Lydia Lichty

Electrical & Computer Engineering Theses & Dissertations

With the need for cleaner energy sources, which can displace fossil fuel, the solar cell industry is of particular interest due to the abundancy of the Sun. Silicon currently dominates terrestrial applications, but efficiency improvements have saturated. III-V based solar cells have reported the highest efficiencies, however, high costs due to substrates and fabrication processes have limited these devices to specialty applications, such as space. In order to reduce the cost associated with fabricating III-V semiconductor substrate material, two different approaches were taken in this work with a particular focus on making III-Vs more applicable outside of specialty applications, including …

Simulation, Measurement, And Emulation Of Photovoltaic Modules Using High Frequency And High Power Density Power Electronic Circuits, Yunas Erkaya

Electrical & Computer Engineering Theses & Dissertations

The number of solar photovoltaic (PV) installations is growing exponentially, and to improve the energy yield and the efficiency of PV systems, it is necessary to have correct methods for simulation, measurement, and emulation. PV systems can be simulated using PV models for different configurations and technologies of PV modules. Additionally, different environmental conditions of solar irradiance, temperature, and partial shading can be incorporated in the model to accurately simulate PV systems for any given condition.

The electrical measurement of PV systems both prior to and after making electrical connections is important for attaining high efficiency and reliability. Measuring PV …

Idpal – A Partially-Adiabatic Energy-Efficient Logic Family: Theory And Applications To Secure Computing, Mihail T. Cutitaru

Electrical & Computer Engineering Theses & Dissertations

Low-power circuits and issues associated with them have gained a significant amount of attention in recent years due to the boom in portable electronic devices. Historically, low-power operation relied heavily on technology scaling and reduced operating voltage, however this trend has been slowing down recently due to the increased power density on chips. This dissertation introduces a new very-low power partially-adiabatic logic family called Input-Decoupled Partially-Adiabatic Logic (IDPAL) with applications in low-power circuits. Experimental results show that IDPAL reduces energy usage by 79% compared to equivalent CMOS implementations and by 25% when compared to the best adiabatic implementation. Experiments ranging …

Generation Of Bipolar Nanosecond Pulses, Sambasiva Rao Rajulapati

Electrical & Computer Engineering Theses & Dissertations

Bipolar pulse generation has been studied using transmission line technology, which was mainly used for monopolar pulse generation. In this thesis, low impedance, high current, nanosecond pulse generators were designed, constructed and tested. Five transmission lines were connected in parallel, so the impedance was 10 n. The transmission lines were switched by a spark gap switch operated in air. The closing of the switch creates a matched condition on one side of the transmission lines and a short circuit on the other side of the transmission lines. When the transmission lines are precharged, one of the two waves in opposite …

Photovoltaic Tracker Optimization With Unique Fault Detection And Enhanced Combiner System, Caitlin Nicole Conway

Electrical & Computer Engineering Theses & Dissertations

Renewable energy resources are rapidly becoming extremely important as the world's energy consumption continues to rise. The most popular of these resources is solar energy and more specifically photovoltaic energy. Currently, solar modules on the market are still not highly efficient. In order to increase the productivity of solar energy systems, larger fixed-panel photovoltaic systems or tracking photovoltaic systems are utilized. The major disadvantage of larger photovoltaic systems is the increased space requirements. Therefore, tracking photovoltaic systems are the best alternative to achieve higher solar energy yields.

To date, the only method of monitoring tracking photovoltaic systems is with the …

Improving The Efficiency Of P3ht:Icba Organic Solar Cells By Modifying The Photoactive Solution Preparation Step, Matthew Blaine Samson

Electrical & Computer Engineering Theses & Dissertations

Organic solar cells (OSCs) are a promising alternative to conventional silicon solar cells. These organic devices offer the promise of facile low cost large scale solution based processing on lightweight, flexible, plastic substrates. At the present state of the technology, however, OSCs exhibit relatively low power conversion efficiencies. To improve these efficiencies, new materials are constantly being developed.

One such material is the fullerene indene-C₆₀ bisadduct (ICBA). When implemented in a poly(3-hexylthiophene-2, 5-diyl) (P3HT) : ICBA bulk heterojunction solar cell, these devices exhibit open circuit voltages exceeding 0.8 V, a value much higher than the devices made implementing phenyl-C …

Optimization Of Solar Cell Arrays Using The Fibonacci Search Algorithm, Felicia Tyyan Farrow

Electrical & Computer Engineering Theses & Dissertations

In our energy hungry world, there is a growing demand to develop creative mechanisms to extract, conserve, and use energy from different resources. The use of solar cells to extract and convert solar energy into electrical energy is a growing and popular field of study because solar energy is clean, free, and renewable. One limitation for photovoltaic (PU) or solar technology is its loss in efficiency and availability as a result of shading or partial shading. Shading or partial shading decreases the total capable output power that the PV system can produce because the array is receiving irradiation from the …

Impact Of Primary User Activity On The Performance Of Energy-Based Spectrum Sensing In Cognitive Radio Systems, Sara L. Macdonald

Electrical & Computer Engineering Theses & Dissertations

Increasing numbers of wireless devices and mobile data requirements have led to a spectrum shortage. However spectrum utilization percentages are often low due to the current static spectrum allocation process where primary users (PUs) are given exclusive use to spectrum. Several mechanisms to increase spectrum utilization have been proposed including opportunistic spectrum access (OSA). Cognitive Radio (CR) is an emerging concept in wireless communication systems that aims to enable OSA in licensed frequencies by secondary users (SUs). CR systems are expected to sense the spectrum in order to determine if the PU is transmitting. Therefore OSA performance relies on the …

Fault Detection System For Solar Tracking Applications, Hareen Sekhar Illa

Electrical & Computer Engineering Theses & Dissertations

Oil, coal and natural gas reserves are being depleted faster than forecasted due to continued increase in demand for energy sources. We need, therefore, to develop renewable energy sources, such as solar, wind, biomass, geothermal, hydro power and tidal energy. In spite of having very high potential, harvesting solar energy has been a challenge because of the relatively low efficiency of solar cells. In the past few years different methods have been developed to increase the efficiency of the photovoltaic (PV) system: (I) improve the efficiency of solar cells (ill use a solar tracking system to increase the received solar …

Modeling Leakage Currents In Metal Insulator Metal Structures With High K Materials, Priyamvada Maleeswaran

Electrical & Computer Engineering Theses & Dissertations

Various products such as personal computers, cellular phones and mobile devices require high speed and low power consumption. Such improvements have been attained by minimizing physical dimensions of electronic devices, leading to high density integration of transistors and capacitors on integrated chips (]Cs). However, as a consequence of down-scaling device dimensions, tunneling of electrons through thin gate oxides (SiO₂) increases, leading to increased static power leakage. This constitutes wastage in power, and for the case of memory applications necessitates faster refresh cycles. In order to overcome such issues, high-k materials (such as HfO₂ and ZrO₂) …

Nonthermal Plasma Jet Efficacy On Candida Kefyr, Amber Marie Mattson Jackson

Electrical & Computer Engineering Theses & Dissertations

The inactivation abilities of a nonthermal plasma jet were investigated with the yeast C. kefyr, a pathogen with increasing importance in healthcare. The plasma is generated using a microhollow cathode discharge (MHCD) geometry operated with a DC voltage of 2 kV and a current of 30 mA using air as the operating gas at an airflow rate of 8 SLM. The plasma discharge approaches room temperature at a few mm away from the plasma jet allowing for the use on heat sensitive surfaces. Dry air and humid air were used as the operating gas to see if humidity plays …

Multi-Term Approximation To The Boltzmann Transport Equation For Electron Energy Distribution Functions In Nitrogen, Yue Feng

Electrical & Computer Engineering Theses & Dissertations

Plasma is currently a hot topic and it has many significant applications due to its composition of both positively and negatively charged particles. The energy distribution function is important in plasma science since it characterizes the ability of the plasma to affect chemical reactions, affect physical outcomes, and drive various applications. The Boltzmann Transport Equation is an important kinetic equation that provides an accurate basis for characterizing the distribution function—both in energy and space.

This dissertation research proposes a multi-term approximation to solve the Boltzmann Transport Equation by treating the relaxation process using an expansion of the electron distribution function …

Evaluation Of Ocean-Energy Conversion Based On Linear Generator Concepts, Michael Allen Stelzer

Electrical & Computer Engineering Theses & Dissertations

A turbine generator is a device that converts mechanical rotation into electrical energy. Unfortunately, the primary driving force that has been used to provide this rotation has, thus far, been fossil fuels. Although fossil fuels have proven to be a reliable resource to continually supply the growing demand for electrical power, they are not without their financial and environmental drawbacks. With the continuously increasing demand for energy, it is hypothesized that the world may, in time, exhaust this precious natural resource and/or inflict permanent environmental damage upon our planet.

However, motions that occur in nature, such as ocean waves, can …

Improving The Efficiency Of Organic Solar Cells By Varying The Material Concentration In The Photoactive Layer, Kevin Anthony Latimer

Electrical & Computer Engineering Theses & Dissertations

Polymer-fullerene bulk heterojunction solar cells have been a rapidly improving technology over the past decade. To further improve the relatively low energy conversion efficiencies of these solar cells, several modifications need to be made to the overall device structure. Emerging technologies include cells that are fabricated with interfacial layers to facilitate charge transport, and tandem structures are being introduced to harness the absorption spectrum of polymers with varying bandgap energies.

When new structures are implemented, each layer of the cell must be optimized in order for the entire device to function efficiently. The most volatile layer of these devices is …

Economic Optimization Of Offshore Wind Farms Using The Geometric Algorithm, Mahidhar Nandigam

Electrical & Computer Engineering Theses & Dissertations

The research project related to this thesis focuses on the optimization of electrical systems for offshore wind farms for a given capacity. The optimal design and planning is a critical issue for developing cost effectively Offshore Wind Farms in energy systems. The Geometric Optimization Algorithms approach has been adopted to develop an optimization program, where the main components of the electrical system of an offshore wind farm and key technical specifications are used as parameters to be optimized for a minimum cost with necessary constraints. The effectiveness of the optimization program can be evaluated with real-time comparison between offshore wind …

Simulation Of Temperature Distributions In Tissue Upon Laser Pulse Irradiation Including Water Mass Transfer, Deepthi Nagulapally

Electrical & Computer Engineering Theses & Dissertations

Lasers, due to their unique characteristics, have tremendous applications in the medical field. Generally all laser applications in hie-medicine involve the propagation of laser energy through tissue. Energy is deposited giving rise to many physical, hie-chemical, and mechanical effects. Among these are dynamical changes in the local temperature distributions within the tissue. Analysis of the temperature changes requires the creation of an appropriate optical transmission and heat flow model that incorporates user specified laser parameters. Here, a numerical simulation model was developed to study both steady state and time dependent temperature distributions due to pulsed laser radiation within user specified …

Electric Field Computation Of Wet Insulating Surfaces, Bhargavi Sarang

Electrical & Computer Engineering Theses & Dissertations

High voltage outdoor insulators form the backbone of modem power systems and therefore play a pivotal role in reliable supply of power. The presence of water droplets/films due to rain, fog, etc. enhances the electric field intensity and leads to electrical breakdown subsequently affecting the longevity of the insulator. The magnitude of surface E-fields necessary for initiation of electrical breakdown is a function of water repellent characteristic of an insulator called hydrophobicity. Thus, knowledge of field distribution around water droplets/films at various hydrophobic levels is significant in designing a better insulating material.

The current research analyzed electric field distributions on …

A Compact Lidar For Aircraft Ozone Atmospheric Measurements, Joel A. Marcia

Electrical & Computer Engineering Theses & Dissertations

Researchers and the general public have expressed great concern over how human activities exacerbate pollution's deteriorating impact upon the environment. Effects such as global warming, air quality and ozone layer depletion are but a few examples that can have a dramatic effect on the quality of life worldwide.

A compact lidar system for the purpose of aircraft ozone atmospheric measurements was tested and evaluated. This system will eventually be deployed for aircraft-based, and possibly unpiloted atmospheric vehicle (UAV), ozone and aerosol measurements to improve our understanding of ozone production and transport. Each of the major subsystems was characterized and from …

A Systematic Study On Structural And Optical Properties In Conjugated Polymer Photovoltaic Devices, Sri Sabarinadh Sunkavalli

Electrical & Computer Engineering Theses & Dissertations

Conjugated polymer/fullerene based solar cells represent an exciting alternative to inorganic ones because of their low production costs, flexibility and low weight. At present, commercialization of organic photovoltaic (OPV) cells is limited due to their relatively low efficiency in comparison to silicon ones. In order to understand the operation of OPV cells and to increase their efficiency, more information about the structure of the absorber layer is needed. In particular, the connection between structure and properties of the absorber layer is of great importance. Performance of bulk heterojunction organic solar cells based on poly (3-hexylthiophene) as donor and a soluble …

Congestion Mitigation In Wireless Sensor Networks Using Single-Hop Backpressure Algorithm, Vijay Shekar Mangilipalli Gangu Sham

Electrical & Computer Engineering Theses & Dissertations

Wireless sensor networks consist of a group of small components with limited resources allocated to sense the environment and transmit data to the user or interpreter. This concept is technically evolved from Sensors that are basically used to sense the environment around and collect data based on the sensing application incorporated in them. An extension to functionality of the sensors leads to the concept of sensor networks, where, in addition to gathering information at individual sensors, the data is processed and transmitted to a central station or Base station. This concept of transmitting the information from one node to the …