Power and Energy Commons^™

A Platinum-Hydrogen Reference Micro-Electrode For All Vanadium Redox Flow Battery, Zhi-Bin Lin, Yan-Qing Dong, Ming-Sen Zheng, Quan-Feng Dong

Journal of Electrochemistry

A platinum-hydrogen reference micro-electrode was made with electroplating Pd on the surface of Pt wire and then coating anion membrane material. This reference electrode was built-in the porous electrode of the all vanadium redox flow batteries (VRFB), and monitored the charging /discharging and self-discharging of the VRFB. The results indicated that the capacity fading of VRFB occurred due to the graduate reduction of V(IV) active species in the electrolyte and the accumulation of V(V) in the positive electrode, leading to nonequilibrium of active species between the positive and negative electrodes.

Porous Co3O4 Hollow Nanospheres Cathode Catalyst For High-Capacity And Long-Cycle Li-Air Batteries, Tong Liu, Na Li, Qing-Chao Liu, Xin-Bo Zhang

Journal of Electrochemistry

In this paper, a high specific surface area of porous Co3O4 hollow nanospheres was successfully synthesized via hydrothermal carbonization at 140 °C, followed by calcination using cobalt nitrate hexahydrate (Co(NO3)2·6H2O), hexamethylenetetramine (HMT), sucrose, and sodium citrate (Na3C6H5O7). The porous Co3O4 hollow nanospheres consisted of nanoparticles with high specific surface area of mesoporous structure, and could provide active reaction sites for OER and ORR. When used as lithium-air battery cathode catalyst, the Co3O4/Super P (SP) electrode exhibited excellent cycle performance, resulting in high capacity and long life of lithium-air batteries.

Syntheses And Electrochemical Performances Of Li4Ti5O12 Anode Materials For Lithium Ion Battery, Yong-Long Zhang, Xue-Bu Hu, Yao-Qiong Wang, Dong-Hai Huang

Journal of Electrochemistry

Series of spinel lithium titanate (Li₄Ti₅O₁₂) materials were synthesized by one-step solid-state reaction using lithium acetate and TiO₂ as raw materials under different temperatures (750/800/850 °C) and atmospheres (N₂/air). The as-prepared Li₄Ti₅O₁₂ materials were investigated by thermogravimetric analysis, X-ray diffraction, scanning electron microscopy, cyclic voltammotry and charge-discharge test to analyze their crystal structures, microstructures and electrochemical performances. The results show that the Li₄Ti₅O₁₂（L-800N）material obtained at 800 °C under nitrogen atmosphere exhibited better electrochemical performance and smaller particle size. The initial …

Electrochemical Conversion Reactions And Their Applications For Rechargeable Batteries, Ting Li, Han-Xi Yang

Journal of Electrochemistry

Electrochemical conversion reactions have received considerable interest as a new redox mechanism for constructing high capacity electrodes of rechargeable batteries. Without strict restrictions on the crystalline structure of the host lattice and the size of the associated ions, conversion reactions can take place in a variety of different metal compounds with different metal cations and deliver much higher reversible capacities through full utilization of all the oxidation states of the transition-metal compounds, opening up a new avenue for developing high capacity materials of rechargeable batteries. This paper briefly reviews the state of the art and challenges of conversion electrodes and …

A Study Of Decision Process In Mcdm Problems With Large Number Of Criteria, Jian Liu, Peng Liu, Si Feng Liu, Xian Zhong Zhou, Tao Zhang

Electrical and Computer Engineering Faculty Research & Creative Works

In this paper, an effective decision process method is proposed to address the challenge in a multiple criteria decision-making (MCDM) problem because of large number of criteria. This method is based on the criteria reduction, tolerance relation, and prospect theory (PT). By building a discernibility matrix for tolerance relation (DMTR) in an MCDM problem with numerical values or interval numbers, this method first allows us to recognize a set of critical criteria from a large criteria pool and ignore the other criteria. Next, it establishes the criteria weights through the DMTR as they are usually not indicated in the data. …

Electrochemical Monitoring Of Cell Wall-Regulated Transient Extracellular Oxidative Burst From Single Plant Cells, Jun-Tao Liu, Yan-Ling Liu, Zhi Cheng, Shi-Jing Chen, Wei-Hua Huang

Journal of Electrochemistry

Oxidative burst by rapid, transient generation of reactive oxygen species (ROS) is a fundamental process for plant disease defense and signal transduction. ROS can be protective or toxic depending on their concentrations, and critical balance between ROS production and scavenging is regulated by complex and perfect mechanisms in plant cells. However, the process of rapid and transient ROS burst from plant cells and their regulatory mechanisms are far from being completely understood, owing to the methodological obstacles in real-time monitoring such a fast process. In this work, we showed the application of microelectrode electrochemistry with high spatiotemporal resolution to monitor …

An Enzymatic Ethanol/O2 Biofuel Cell Powered By Commercial Vodka Fuel, Yi-Ming Yan, Lan-Qun Mao

Journal of Electrochemistry

This study demonstrates the performance of a new type alcohol/O₂ biofuel cell assembled by using alcohol dehydrogenase (ADH) and bilirubin oxidase (BOD) as the biocatalysts of the bioanode and the biocathode for the bioelectrocatalytic oxidation of alcohol and reduction of oxygen, respectively. To construct the bioanode and the biocathode, single-walled carbon nanotubes (SWCNTs) were used. In the bioanode, SWCNTs were used as the supporting materials for both methylene green (MG) which was used as the electrocatalyst for the oxidation of NADH and ADH. The as-constructed MG/ADH/SWCNTs-based bioanode exhibits a good activity toward the bioelectrocatalytic oxidation of ethanol. In the …

Electrochemical Detection Of L-Cysteine Based On Iron Phthalocyanine/Nitrogen-Doped Graphene Modified Electrodes, Jing-Jing Xiao, Hui-Ying Xu, Li Xu, Bao-Hong Liu

Journal of Electrochemistry

In this study, we report a facile method to develop FePc/N-G hybrid modified electrode for the detection of L-cysteine. The electrochemical sensor was characterized by cyclic voltammetry and amperometric response. The sensor exhibited a wider linear range with rapid response which has outperformed pure FePc/GCE, highlighting the important role of nitrogen doped graphene as substrate for improving the electrochemical response property.

Nanosized Fe2O3 On Three Dimensional Hierarchical Porous Graphene-Like Matrices As High-Performance Anode Material For Lithium Ion Batteries, Qin-Wei Zhang, Yun-Yong Li, Pei-Kang Shen

Journal of Electrochemistry

Ferric oxide (Fe₂O₃) as a promising anode material for lithium ion battery is due to its high theoretical capacity (1007 mAh·g^-1), earth abundance and low cost. The nanosized Fe₂O₃ on the three dimensional hierarchical porous graphene-like network (denoted as Fe₂O₃-3D HPG) has been synthesized by homogeneous precipitation and heat treatment. The 3D HPG can provide a highly conductive structure in conjunction to support well contacted Fe₂O₃ nanoparticles, and effectively enhance the mechanical strength of the matrices during volume changes, as well as improve the …

Preparation And Properties Of Titanium Based Metal Oxide Electrodes For Ammonia Nitrogen Wastewater Treatment, Xue Li, Meng Xue, Ling Huang, Jun-Tao Li, Shi-Gang Sun

Journal of Electrochemistry

In this paper, four types of titanium based metal oxides electrodes were prepared by thermal decomposition method: Ti/SnO₂+Sb₂O₃, Ti/SnO₂+Sb₂O₃/SnO₂+IrO₂, Ti/SnO₂+Sb₂O₃/SnO₂+RuO₂, Ti/SnO₂+Sb₂O₃/SnO₂+CeO₂. The XRD results show that CeO₂ in Ti/SnO₂+Sb₂O₃/SnO₂+CeO₂ displayed a good crystal structure, and there was no significant oxygen evolution reaction occurred after electrolytic oxidation. Compared with the other three electrodes, the Ce-doped …

Naio4 Oxidation Of Mussel Adhesive Protein Film And Its Corrosion Protection For Mg-1.0ca Alloy, Rui-Qing Hou, Ping-Li Jiang, Shi-Gang Dong, Chang-Jian Lin

Journal of Electrochemistry

The effect of oxidation of mussel adhesive protein (Mefp-1) film on the corrosive resistance for Mg-1.0Ca alloy was investigated by scanning electron microscopy (SEM), atom force microscopy (AFM), electron probe microanalysis (EPMA), Infrared reflection absorption spectroscopy (IRAS) and electrochemical methods. The results showed that the NaIO₄ induced oxidation of the pre-formed Mefp-1 film with porous morphology involved structural change of the DOPA group in the protein and resulted in a more uniform film with net-like morphology. The protein film without oxidation had an increasing resistance for the corrosion of Mg-1.0Ca alloy up to 7 days exposure. After oxidation, Epit …

Con-Resistant Trust For Improved Reliability In A Smart Grid Special Protection System, Crystal M. Shipman, Kenneth M. Hopkinson, Juan L. Lopez Jr.

Faculty Publications

This paper applies a con-resistant trust mechanism to improve the performance of a communications-based special protection system to enhance its effectiveness and resiliency. Smart grids incorporate modern information technologies to increase reliability and efficiency through better situational awareness. However, with the benefits of this new technology come the added risks associated with threats and vulnerabilities to the technology and to the critical infrastructure it supports. The research in this paper uses con-resistant trust to quickly identify malicious or malfunctioning (untrustworthy) protection system nodes to mitigate instabilities. The con-resistant trust mechanism allows protection system nodes to make trust assessments based on …

A New Design Method For Vanadium Redox Batteries In Renewable Energy Systems, Casey Gibson, Karla G. Morrissey Unversity Of Arkansas, Fayetteville

Inquiry: The University of Arkansas Undergraduate Research Journal

This study investigated the behavior of vanadium redox flow batteries (VRFBs), which are batteries capable of easily switching between charging and discharging modes, making them a suitable option for storing intermittent sources of alternative energies (solar, wind, etc). Since different sizes of the battery provide varying voltages, optimal parameters for a particular home are key for implementation. These parameters, specifically the cell and tank volumes of the battery that are capable of providing consistent on-load voltage, were determined using data from a 13 kW solar array and a medium-sized house. Charge/discharge current values were used to run a mathematical model …

Romania's Participation To The European Assessment Project Titled Hyunder, Multi-Criterial Analyses Of Salt Cavern Locations, Ioan Iordache, Dorin Schitea, Adriana Marinoiu, Mihaela Buga, Mihai Balan, Ioan Stefanescu, Adrian Gheorghe, Mihaela Iordache, Viviana Cigolotti (Ed.), Chiara Barchiesi (Ed.), Michela Chianella (Ed.)

Engineering Management & Systems Engineering Faculty Publications

The scope of the work is to assess the potential, the actors and relevant business cases for large scale storage of renewable electricity by hydrogen underground storage in Romania. This presentation intends to provide a picture of the multi-criterial analyses of salt cavern locations in Romania.

The energy sector is facing with the necessity to store large energy quantities for short to long term in order to adapt to the increasingly intermittent renewable energy. The results of this presentation have originated from an ongoing European assessment project by the name of HyUnder (FCH JU, grant 303417) regarding utilization of salt …

A Computational Study Of A Photovoltaic Compound Parabolic Concentrator, William M. Vance

Browse all Theses and Dissertations

Routines have been written and added to the Wright State developed solar system simulation program called Solar_PVHFC to model incident solar radiation for a compound parabolic concentrator (CPC) that uses solar panels (photovoltaic panels) to produce electrical energy. Solar_PVHFC is a program that models a solar energy system composed of solar panels to produce electricity from the sun, hydrogen storage tanks to chemically store the energy produced by the solar panels, and fuel cells to convert between electrical and chemical energy when required. Solar_PVHFC features several adjustable parameters to model a solar panel, hydrogen storage, and fuel cell system. Now …

Verification And Validation Of A Transient Heat Exchanger Model, Jayme Lee Carper

Browse all Theses and Dissertations

A statistical based verification and validation process is applied to the transient modeling of a shell and tube heat exchanger. A generic model of a heat exchanger was developed based on first principles as a sub-system of a larger thermal system model. This model was originally created without any experimental data, as it was not readily available. To provide the data necessary to apply the validation process, a thermal emulator was designed and built that allowed control of all system inputs to the heat exchanger, while also providing the instrumentation to record all required data. A wide test matrix was …

Temporary Bonding With Polydimethylglutarimide Based Lift Off Resist As A Layer Transfer Platform, T. Matsumae, A. D. Koehler, J. D. Greenlee, T. J. Anderson, H. Baumgart, G. G. Jernigan, K. D. Hobart, F. J. Kub

Electrical & Computer Engineering Faculty Publications

Bonding of lift off resist (LOR) was performed to realize temporary wafer bonding without residue. Bonding process conditions such as spin speed, pre-bake temperature, and bonding temperature were optimized to obtain a large bonded area with high bond strength. Under optimized process conditions, a bonded area covering over 98% of the wafer surface, with a room temperature bond strength of nearly 5 J/m² is achieved. During razor blade testing, fracture often occurs at the Si wafer. Moreover, debonding using an N-Methyl-2-pyrrolidone (NMP)-based solvent left the wafer surface extremely small amount of residue. Thus, the optimized bonding processed developed in …

Platinum Hollow Nanospheres With Different Sizes: Controllable Synthesis And Electrocatalytic Oxidation Toward Methanol, Xuan Lin, Mei-Qin Cheng, Zhong-Jin Shang, Ting Xiong, Xian-Tu Zhang, Wei Tian, Jian-Yun Lin, Qi-Ling Zhong, Bin Ren

Journal of Electrochemistry

The selenium (Se) templates and hollow platinum (Pthollow) nanospheres with different sizes were controllably synthesized by adjusting the concentration of sodium dodecyl sulphonate (SDSN) (CSDSN, μmol·L-1) which was used as a surfactant. Accordingly, the Pthollow nanospheres modified glassy carbon (GC) electrode (Pthollow/GC) was prepared. The morphology and composition of Pthollow nanospheres were characterized by scanning electron microscopy (SEM), transmission electron microscope (TEM), energy dispersive X-ray spectroscopy (EDX), high resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED) and X-ray diffraction (XRD) techniques. The electrocatalytic activities of Pthollow/GC and electrodeposited Pt nanoparticles modified glassy carbon electrode (Ptnano/GC) toward methanol oxidation …

Comparison In Factors Affecting Electrochemical Properties Of Thermal-Reduced Graphene Oxide For Supercapacitors, Peng Xiao, Da-Hui Wang, Jun-Wei Lang

Journal of Electrochemistry

In this paper, thermal-reduced graphene oxide (T-RGO) materials are synthesized by modified Hummer’s method, followed by thermal reduction under argon atmosphere at different temperatures. Electrochemical investigations show that, for T-RGO electrodes, good electrical conductivity is necessary and the surface functional groups play more significant role than the specific surface area in determining the electrochemical capacitance. The T-RGO obtained at 900 °C (T-RGO900) with a relatively high Brunauer-Emmett-Teller (BET) surface area (314 m²·g^-1) and a high electrical conductivity (2421 S·m^-1) shows a low specific capacitance of 56 F·g^-1. In comparison, the T-RGO obtained …

Synthesis Of Namnpo4 By Spraying Drying-High Temperature Sintering And Its Electrochemical Performance, Xiao-Chen Lin, Xiao-Biao Wu, Xu Hou, Yong Yang

Journal of Electrochemistry

As a cathode material for sodium ion batteries, NaMnPO₄/C nanocomposite is successfully synthesized by the combination of spraying drying and high temperature sintering methods. The crystal structure of the as-synthesized phosphate material is confirmed as the natrophilite NaMnPO₄, which possesses orthorhombic symmetry and Pmnb space group. It is shown that the precursors are hollow spherical particles and the obtained product consists of micro-scaled secondary particles, which are composed of NaMnPO₄ nanocrystallites (tens of nanometres) and amorphous carbon networks. The ionic and electronic conductivities of NaMnPO₄ are both effectively enhanced with the help of this …

One-Step Synthesis Of Pani/Nihcf Hybrid Film Using Unipolar Pulse Electrodeposition And Its Electrocatalytic Reduction Performance For H2O2 Detection, Sen-Liang Liao, Xiu-Min Li, Xiao-Gang Hao, Yan-Hong Wang, Chun-Feng Xue, Yong-Hong Wang

Journal of Electrochemistry

Organic–inorganic hybrid films composed of polyaniline/nickel hexacyanoferrate (PANI/NiHCF) were fabricated on platinum substrates using unipolar pulse one-step electrodeposition. The deposition mechanism of hybrid film was proposed: Due to high potential of unipolar pulse electrodeposition, which avoided the reduction of Fe(CN)₆^3-, the films with high electrocatalytic property and “insoluble” form of NiHCF were achieved. The morphology and composition of PANI/NiHCF hybrid film were characterized by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and Fourier transform infrared spectroscopy (FT-IR). The effect of pulse potential on the electrochemical performance of hybrid film was investigated in detail. Results showed that …

Electrochemical Applications Of Single-Walled Carbon Nanohorns, Su-Ping Li, Huai-Min Guan, Shu-Yun Zhu, Muhammad Rehan Hassan Shah Gilani, Saima Hanif, Guo-Bao Xu, Yue-Jin Tong

Journal of Electrochemistry

Single-wall carbon nanohorns (SWCNHs) have unique properties, such as a large specific surface area, good electrical conductivity and biocompatibility. It has been widely utilized in many fields. In the present review, the progress in electrochemistry study of SWCNHs has been summarized and the future research trends have been proposed.

Direct Electrochemistry And Glucose Biosensing Of Glucose Oxidase-Gold Nanoparticles Composite Synthesized By Enzyme Method, Fang He, Xiao-Li Qin, Ying-Chun Fu, Chao Chen, Qing-Ji Xie, Shou-Zhuo Yao

Journal of Electrochemistry

Glucose oxidase (GOx)-gold nanoparticles (AuNPs) composite was synthesized by the one-pot enzyme reaction in the mixture solution of NaAuCl₄, GOx and glucose, and a Nafion/GOx-AuNPs/glassy carbon electrode was fabricated by the cast-coating method to examine the direct electrochemistry of GOx and the biosensing performance on this electrode. Such a GOx-AuNPs composite showed good direct-electrochemistry activity and bioactivity of GOx, probably because the enzyme-mediated AuNPs are close to the redox active centers of GOx. This enzyme electrode exhibited a linear amperometric response to glucose concentration (0.54 mmol·L^-1) at -0.4 V (vs. SCE), and a detection limit of …

Density Functional Theory Study On The Structures Of Solvent-Ion In The Electrolyte Of Lithium Ion Battery, Li-Dan Xing, Ru Yang, Xian-Wen Tang, Wen-Na Huang, Qi-Feng Liu, Qi-Peng Yu, Wei-Shan Li

Journal of Electrochemistry

In this work, the possible structures of solvent-ion complex, resulting from the electrostatic interaction in the propylene carbonate (PC) base electrolyte of lithium ion battery, have been investigated using the density functional theory. The calculated results show that the structure of solvent-ion complex depends on the solvent number. In the PC base electrolyte, maximum number of PC solvents that coexist in the Li⁺-solvent sheath is four. Additionally, the salt anion exists in a complex with the positively charged alkyl group of PC rather than in a free state. The calculated results give a good explanation to the reported …

2014 Fall Engr333 Project Final Report, John Sherwood, Jonathan Crow, Nicolaas Ourensma, Zak Devries, Andy Frandsen, Jack Kregel, Ryan Rhodes, Connor Vandongen, Schieffer Kwong, Jee Myung Kim, Matthew Deyoung, Jeff Demaagd, Tyler Devries, Doug Faber, Garrick Hershberger, Jake Derooy, Dustin Brouwer, David Evenhouse, Patrick Anderson, Thomas Brown, Ed Smit, Joel Smith, Thane Symens, Kaitlyn Weinstein, Seth Koetje, Nick Memmelaar, Austin Juza, Matt Ramaker, Ryan Demeester, Jordan Newhof, Wes Richards, Josh Vanderbyl

ENGR 333

The net-zero homes project that this class worked on throughout the semester was designed to determine what it would take to bring a home in Grand Rapids, Michigan to the status of net-zero and whether or not it is feasible to do so. The idea behind a net-zero home is to reduce the energy usage in the home, whether it is by lifestyle changes, insulation additions, or by appliance upgrades, and then produce the remaining energy deficit from renewable sources, so that the homeowner has a net usage of zero at the end of the year. This report details the …

2014 Fall Engr333 Student Seminar Presentation, John Sherwood, Jonathan Crow, Nicolaas Ourensma, Zak Devries, Andy Frandsen, Jack Kregel, Ryan Rhodes, Connor Vandongen, Schieffer Kwong, Jee Myung Kim, Matthew Deyoung, Jeff Demaagd, Tyler Devries, Doug Faber, Garrick Hershberger, Jake Derooy, Dustin Brouwer, David Evenhouse, Patrick Anderson, Thomas Brown, Ed Smit, Joel Smith, Thane Symens, Kaitlyn Weinstein, Seth Koetje, Nick Memmelaar, Austin Juza, Matt Ramaker, Ryan Demeester, Jordan Newhof, Wes Richards, Josh Vanderbyl

ENGR 333

File for student presentation, given by students in the Fall 2014 class of ENGR333.

The Role Of Quantum Dot Size On The Performance Of Intermediate Band Solar Cells, Najla Alnami

Graduate Theses and Dissertations

The goal of this thesis is to understand possible mechanisms for the reported decrease of the open circuit voltage and solar cell efficiency in quantum dot (QD) intermediate band solar cells (IBSCs). More specifically, the effect of indium arsenide (InAs) QD height on the open circuit voltage and solar cell efficiency was studied in a systematic way. To explore this effect in QD solar cells, several solar cells (SCs) were grown with varying InAs QD heights. All experimental characteristics of the QD solar cells were compared to a reference structure without QDs. All samples were grown by Molecular Beam Epitaxy …

Photoelectric Characterization Of Bacteriorhodopsin Reconstituted In Lipid Bilayer Membrane, Joel Kamwa

Graduate Theses and Dissertations

The objective of this work was to conduct basic research in biologically inspired energy conversion solutions. A photosynthetic protein (Bacteriorhodopsin) was reconstituted in a bi-layer membrane. Then, when a laser beam was shined on the membrane, the photon energy was used by the protein to pump protons across the membrane. The translocation of protons across the membrane was measured as photocurrent. For this purpose, a system was built to characterize the lipid bilayer membranes and to measure the photocurrent. The lipid bilayer membrane was characterized by its capacitance and resistance. A picoampere photocurrent was observed when Bacteriorhodopsin protein was present …

Life Cycle Assessment Projection Of Photovoltaic Cells: A Case Study On Energy Demand Of Quantum Wire Based Photovoltaic Technology Research, Shilpi Mukherjee

Graduate Theses and Dissertations

With increasing clean-energy demand, photovoltaic (PV) technologies have gained attention as potential long-term alternative to fossil fuel energy. However, PV research and manufacture still utilize fossil fuel-powered grid electricity. With continuous enhancement of solar conversion efficiency, it is imperative to assess whether overall life cycle efficiency is also being enhanced. Many new-material PV technologies are still in their research phase, and life cycle analyses of these technologies have not yet been performed. For best results, grid dependency must be minimized for PV research, and this can be accomplished by an analytical instrument called Life Cycle Assessment (LCA).

LCA is the …

Influence Of Pt:Ru Ratio In Nanotubes Array Structures On The Electrocatalytic Activity Of Methanol Oxidation, Jin-Hua Yuan, Feng-Bin Wang, Xing-Hua Xia

Journal of Electrochemistry

Bimetallic PtRu nanotubes array electrodes (NTAEs) with varied Pt to Ru atomic ratios have been prepared by electrochemical codeposition in 3-aminopropyltri-methoxysilane modified porous anodic alumina (PAA) membranes. The structure and morphology of the catalysts were characterized using X-ray diffraction (XRD) and scanning electron microscopy (SEM), respectively. Electrochemical results showed that the NTAEs with varied atomic ratios could be achieved by controlling the precursor concentration for deposition. The prepared nanoarrays composed of Pt or PtRu alloy promoted the mass-normalized activity toward the sluggish electrooxidation reaction of methanol due to the increased catalytic activity and real surface area, as well as the …