Power and Energy Commons^™

Design, Fabrication And Characterization Of Zero Power Sensor/Harvester For Smart Grid Applications, Zeynel Guler

Mechanical Engineering ETDs

This study presents a flexible sensor/harvester device to be used in both electromagnetic sensing and energy harvesting applications for smart grids. When a current passes through a wire, the sensor detects the magnetic field created by that current. The sensor magnet interacts with the wire magnetic field resulting in a transfer of energy through the piezoelectric cantilever. Piezoelectric, conductive, magnetic, and magnetostrictive composite thin films were prepared to fabricate this device.

Initially, the magnet of the cantilever was optimized considering its shape, thickness, length, taper angle etc. via both simulations and experiments. Peak to peak voltage versus cantilever position graph …

Gpu Based Monte Carlo Estimation Of Eddy Current Losses In Electromagnetic Coil-Core System, Adwaith Ravichandran

Theses and Dissertations

A novel parallelizable probabilistic approach to model eddy currents in AC electromagnets is presented in this research. Consequently, power loss associated with the formation of these eddy currents is estimated and validated using experimental data. Furthermore, predicting the effect of ferromagnetic alternating field enhancement on power loss in the source excitation winding has been an active area of research. Unlike a stationary field, an alternating sinusoidal field diffuses partially into the ferromagnetic material leading to a predictably sub-optimal field enhancement. To model these physics, finite element techniques employ nonlinear iterative solvers which are time consuming. A novel method is developed …

Employment Of Intelligent Predictive Maintenance On Thermal Power Plant Component Parts Taking Condenser Vacuum As A Case Study, Titus Ajewole

Tanzania Journal of Engineering and Technology (TJET)

This work proposes deployment of machine learning in the maintenance of individual constituent parts of steam power plant assemblages. With the condenser vacuum of a steam turbine (in a six-turbine plant assemblage) taken as a case study, information on the past operating parameters of the selected plant component was used to forecast its future working condition. Based on Exponential Gaussian Process of Regression, a model was developed, trained using the diachronic operational data, and employed in determining the future. A quantitative evaluation was employed to provide the distribution of the test values of the data about the lines of regression, …

Designing A Model Of Solar Photovoltaic Water Pumping System For Off-Grid Localities In Tanzania, Imani Mruma

Tanzania Journal of Engineering and Technology (TJET)

Modeling of photovoltaic (PV) water pumping system for rural water localities is vital especially in these modern days, in Tanzania. This is due to the rise of high number of solar-powered rural water projects constructed lacking appropriate design. The fate result into poor and substandard projects delivering below expectations. Kikombo Solar Water Project situated in Dodoma; Tanzania is one among poorly designed solar project chosen as a case study to validate proposed model. The main problem of Kikombo project is unsatisfactory amount of water from domestic points to satisfy population demand. This matter has been raised by pumping-station attendants and …

Renewable Energy Potential Assessment For Improving Electric Power Availability In Urban Area: A Case Of Msigani Ward In Ubungo Municipal, Tanzania, Respicius Kiiza

Tanzania Journal of Engineering and Technology (TJET)

The demand for electricity in urban areas of the developing countries like Tanzania is increasing rapidly due to factors such as increasing population, expansion of economic activities and industrialization. Msigani ward is one of the fourteen (14) administrative urban wards in Ubungo Municipal, Dar es Salaam, located at latitude 6.8031 oS and longitude 39.1188 oE. Recently, there has been observed increase in power demand in this ward. This in turn has caused a supply deficit that sometimes led to large number of interruptions caused by frequent power outage and load shedding. The total capacity of the national grid is limited …

Mppt Dc-Dc Buck-Boost Converter For Off Grid Hybrid Solar-Wind Battery System In Ikuza Island, Tanzania, Aviti Thadei Mushi

Tanzania Journal of Engineering and Technology (TJET)

Ikuza Island in Kagera-Tanzania faces lack of electricity due to cost challenges of extending the grid by marine cables and other transmission facilities. These makes such endeavour not appealing to the supply authority due to those higher charges. Therefore, this paper undertakes to design hybrid renewable energy sources for the island by specifically focusing on the buck-boost converter for the energy conversion from these renewable resources. The design of the bidirectional buck-boost converter for maximum power point tracking in off-grid hybrid renewable energy systems is multifaceted due to the inhomogeneity nature of the renewable energy sources. The bidirectional buck-boost converter, …

Aquaculture In Hydropower Reservoirs, Racheal Macharia

Tanzania Journal of Engineering and Technology (TJET)

There is an undoubtedly existing relationship between water, energy, and food and their interaction with the natural environment and mankind. Climate change is the talk of the day in global development discussions as it intensifies water shortages, energy, poverty, food shortages, and environmental degradation. Currently, most of the hydropower dams constructed in Africa are majorly built to store water for agricultural purposes, control flooding, and generate electricity. Notable projects include the seven forks hydropower stations located on the Tana River in Kenya; Aswan high dam in Egypt; Grand Renaissance dam in Ethiopia; Kariba dam in Zimbabwe and Akosombo in Ghana. …

Smart Grid In Tanzania: Research Opportunities, Aviti Thadei Mushi

Tanzania Journal of Engineering and Technology (TJET)

reinvigorated its power generation capacity significantly to ensure smooth execution of its industrialization agenda and cope with the fourth industrial revolution. To ensure reliable availability of power to sustain its growing economy, Tanzania embarked on a deliberated measure to forge an energy mix. This deliberate measure encompasses the use of renewable energy technologies such as wind, solar, biomass, wastes, and micro hydro; natural gas; and other energy sources which are locally available including coal and geothermal. To effectively and efficiently manage such a growing power system and make electricity accessible to all for higher levels of industrial investment and services, …

Isolation And Performance Test Of Green Low Dosage Hydrate Inhibitors From Local Materials For Improving Flow Assurance In Oil And Gas Industry, Makungu Madirisha

Tanzania Journal of Engineering and Technology (TJET)

The formation of gas hydrates in oil and gas industry can be minimized or prevented by the use of inhibitors. This paper reports on hemicellulose and modified lignin as low dosage gas hydrate inhibitors (LDGHIs). LDGHIs were isolated from sugarcane bagasse (SCB), plant gum exudates (PGE) of Acacia trees, and coconut coir, and further characterized by Attenuated Total Reflectance - Fourier Transform Infrared (ATR-FTIR) spectrometer, porosimeter and thermogravimetric analyzer (TGA). The PGE and SCB yielded 77.75% and 12.38% of hemicellulose, respectively, while coconut coir yielded 35.59% of lignin which was modified to sodium lignosulfonate (SLS) to improve its solubility in …

Experimental Investigation On Recovery Of Micro Hydropower Dump Load Through Oil Heating System, Joseph H. Kihedu Dr.

Tanzania Journal of Engineering and Technology (TJET)

Micro hydropower power generates electrical energy to meet connected electrical demand, that normally fluctuates causing imbalances. Electronic load controller is then used to balance power system by diverting surplus generated power to the dump load commonly resistive load such as bulk water heater. This study investigated use of oil heating system as a replacement for conventional resistive dump load. In comparison to water, oil has high thermal retention therefore can serve as good thermal media. Dump load range ranged between 17 kW to 78 kW. A 6-kW electrical heater was used for laboratory oil heating system from which heated oil …

The Modernization Of Large Power Transformer Tanks, Babajide O. Williams

Electronic Theses and Dissertations

Due to the current demands placed on the power grid in terms of climate change, increasing urbanization, and terrorist attacks, the U.S. government in response to these demands, mandated that all the grid components be modernized in order to increase their reliability. As a critical component of the grid, Large Power Transformers (LPTs) play a key role in ensuring sustainable power generation and distribution. A literature search performed in this work and the analysis of data retrieved from the search showed that the tanks of these LPTs are critical to their durability, longevity, and reliability. Therefore, the reliability of LPTs …

Power Thyristor Controller For Speed Control Of Dc Motor, Alejandra Zapata, Morgan Erich Boehme, Abdullah Mohammed Awidah, Payton Robert Chalstrom

Electrical Engineering

In this work, a Power Thyristor Controller for Speed Control of DC Motor has been developed with the purpose of replacing an existing simulation experiment, aiming to effectively implement the principle of learning by doing. The primary objective of the experiment setup is to illustrate the fundamental principles and operational mechanisms underlying the firing angle and controlled bridge rectifier. The new experiment is taking advantage of the existing FCRO4100 Single Phase Firing Board that was donated to the University by ENERPRO. The pre-programmed microcontroller is connected to the thyristor bridge rectifier that’s powered by 24VAC. Additionally, a DC motor will …

Classification Of Electrical Current Used In Electroplastic Forming, Tyler Grimm

All Dissertations

Electrically assisted manufacturing (EAM) is the direct application of an electric current to a workpiece during manufacturing. This advanced manufacturing process has been shown to produce anomalous effects which extend beyond the current state of modeling of thermal influences. These purported non-thermal effects have collectively been termed electroplastic effects (EPEs).

While there is a distinct difference in results between steady-state (ideal DC) testing and pulsed current testing, the very definition of these two EAM methods has not been well established. A "long" pulse may be considered DC current; a "short" pulse may produce electroplastic effects; and even "steady-state" current shapes …

Design Of International Airport Hybrid Renewable Energy System, Aviti Thadei Mushi

Tanzania Journal of Engineering and Technology (TJET)

This paper presents the design and simulation of a hybrid renewable energy system utilizing solar and wind energy sources with a backup generator. The demand for reliable electric energy in support of investments in large social and economic development activities such as airport operations has been an agenda worldwide. In Tanzania, Mwanza International Airport (MIA) expects to consume about 18 MVA of electric power annually to support its operations for the next 25 years. About 78-80% of the world's commercial energy comes from fossil fuels. Non-renewable fuels and other negative effects contribute to global warming through greenhouse gas emissions and …

Factors Influencing Total Productive Maintenance Implementation For Thermal Generation Plants, Ismail W. R. Taifa Dr

Tanzania Journal of Engineering and Technology (TJET)

This study accepts that the technical and administrative factors can amplify effective total productive maintenance (TPM) implementation at thermal generation plants. It is noted that there is a limited number of studies that have attempted to understand the subject of TPM implementation in the energy sector. Noting this shortcoming, the authors thought it crucial to generate empirical evidence on the factors influencing effective TPM implementation for thermal generation plants, with evidence from gas-fired plants. A sample of 88 respondents was selected and consulted. Data were collected through questionnaires and analyzed quantitatively by inferential statistics and qualitatively through thematic analysis using …

Sensible Heat Bean Cooker, Casiana Lwiwa

Tanzania Journal of Engineering and Technology (TJET)

Alternative cooking energy to replace wood fuels is needed in the African context. Liquified Natural Gas (LNG) is a solution but is still based on burning fossil fuel. Electrical cookers can be an alternative as well. However, for off-grid systems this means electrical batteries are required, as the solar electricity from Photovoltaic (PV) panels is intermittent, and as cooking is also to be made after sunset. Heat storage technologies can provide solutions where available energy is stored in the form of heat for cooking when needed. The challenge is then to develop systems which are robust, safe, and technically simple. …

Development Of Solar Pv Systems For Mini-Grid Applications In Tanzania, Seleman Mayanjo

Tanzania Journal of Engineering and Technology (TJET)

Access to electricity offers great benefits to development through the provision of reliable and efficient energy sources in the country. Majority of the population living in the remote and rural areas of developing countries mostly sub-Saharan Africa are not supplied with electricity. Although the governments through their electricity companies put their effort to extends the grid distribution networks to remote and rural areas still the coverage were not sufficiently enough due to growing demands for safe and reliable electricity. However, solar as a source of energy remains the least utilized energy source in many countries including Tanzania. Solar Photovoltaic (PV) …

Optimal Energy Management For Off-Grid Hybrid Renewable Energy Systems, Owdean M. Suwi

Tanzania Journal of Engineering and Technology (TJET)

A photovoltaic (PV)/wind/battery/Generator-Set hybrid power system's energy dispatch is discussed in this research, along with the ideal solution. The optimization model enables the hybrid power system's generating devices to share power appropriately. The main goals are to minimize fuel consumption and costs and maximize the usage of Renewable Energy Sources (RES). The proposed simulation plan succeeds in lowering fuel costs because the diesel generator only kicks on at night and in the early morning when the energy from RES is insufficient to supply the load. The load is supplied with power, and the battery is charged throughout the day, when …

A Review Of Piezoelectric Footwear Energy Harvesters: Principles, Methods, And Applications, Bingqi Zhao, Feng Qian, Alexander Hatfield, Lei Zuo, Tian-Bing Xu

Mechanical & Aerospace Engineering Faculty Publications

Over the last couple of decades, numerous piezoelectric footwear energy harvesters (PFEHs) have been reported in the literature. This paper reviews the principles, methods, and applications of PFEH technologies. First, the popular piezoelectric materials used and their properties for PEEHs are summarized. Then, the force interaction with the ground and dynamic energy distribution on the footprint as well as accelerations are analyzed and summarized to provide the baseline, constraints, potential, and limitations for PFEH design. Furthermore, the energy flow from human walking to the usable energy by the PFEHs and the methods to improve the energy conversion efficiency are presented. …

Enhancing Traffic Safety In Unpredicted Environments With Integration Of Adas Features With Sensor Fusion In Intelligent Electric Vehicle Platform With Implementation Of Environmental Mapping Technology, David S. Obando Ortegon

College of Graduate Studies: Theses & Dissertations

A major objective on society is to reduce the number of accidents and fatalities on the road for drivers, and pedestrians. Therefore, the automotive engineering field is working on this problem through the development and integration of safety technologies such as advanced driving assistance systems. For this reason, this work was intended to develop and evaluate the performance of different ADAS features and IV technologies under unexpected scenarios. This by the development of safety algorithms applied to the intelligent electric vehicle designed and built in this work, through the use of ADAS sensors based on sensor fusion. Evaluation of AEB, …

Evaluating The Impact Of Increased Cycling On Thermal Power Plants Due To Wind Energy Penetration In The Midwest: A Case Study, Joscelyne Larson

Electronic Theses and Dissertations

One of the most significant shifts in the mix of U.S. electricity generation over the past few years has been the rapid expansion of renewable energy resources, especially solar and wind. However, fossil fuels are still necessary to fulfill the world’s energy requirements. Despite efforts to increase the use of renewable energy sources, these sources can be at times unreliable, causing countries around the world to continue to rely on base load units such as coal and natural gas. This decrease in fossil fuels and increase in renewable energy sources presents many complex issues in terms of power system planning, …

Solid-State Electrolytes For Long Duration Molten Sodium Batteries, Ryan C. Hill

Theses and Dissertations--Chemical and Materials Engineering

Rechargeable batteries have become a staple of modern society, driving the development and expansion of portable electronics and electric vehicles. The long lifetime and high energy density provided by batteries have made them excellent candidates for use in the emerging field of long duration, grid-scale energy storage. However, traditional battery chemistries, such as Li-ion, are not an ideal solution for grid-scale storage, due to high-cost raw materials that are often sourced from volatile markets. Sodium-based batteries are a promising alternative for long duration storage, owing to the domestic abundance of raw materials and energy densities that nearly rival that of …

Technical And Economic Feasibility Of A Microgrid For A Fire Station In Humboldt County, California., Nishaant Kumar Sinha

Cal Poly Humboldt theses and projects

Microgrids are emerging as a promising solution to unreliable grid energy. Today, California is not only witnessing grid resiliency challenges from natural disasters such as wildfires, earthquakes, floods and heatwaves, but it is also seeking to green the grid and bring more renewables online. For example, Humboldt County, where this project is focused, has recently experienced an earthquake of 6.4M (on December 22nd, 2022), which shut down the regional grid for ~20 hours.

Microgrid adoption enables critical facilities to operate seamlessly. The Humboldt Bay Fire Station (HBFS) No.1 is one such example, where first responders work to protect citizens against …

System Analysis Of An Internal Combustion Engine (Ice) – Solid Oxide Fuel Cell (Sofc) Hybrid Cycle, Jose Javier Colon Rodriguez

Graduate Theses, Dissertations, and Problem Reports (ETD)

Due to the intermittent nature of renewable energy and the rigid operation of existing coal plants, the need for flexible power generation technology is eminent. Hybrid energy systems have shown potential for flexible, grid following dynamics while maintaining higher efficiencies. The work below focuses on the performance analysis of a proposed 100 kW pressurized Internal Combustion Engine (ICE) and Solid Oxide Fuel Cell (SOFC) hybrid system. The un-utilized fuel from the SOFC stack provided the chemical energy to operate the engine. A turbocharger was used to deliver the necessary air flow for both the stack and engine. An external reformer …

Energy Assessment Of E-Motorcycles As A Clean Transport Mode For Passenger Mobility: A Case Of Ilala District, Dar Es Salaam, John Shirima

Tanzania Journal of Engineering and Technology (TJET)

Electric motorcycles or e-motorcycles is a clean mode of road transport that present a prominent solution toward decarbonizing cities. Despite of e-motorcycles being cleaner than gasoline ones, at the moment, there is missing information whether it is feasible to replace gasoline motorcycles with e-motorcycles used for business transport purposes. This paper, therefore, presents the results comparing energy usage when using e-motorcycles and when using the gasoline motorcycles. The energy demand for driving passengers using an e-motorcycle in the precarious routes originated from Gongo la Mboto bus stop to Segerea bus stop, Buguruni Malapa, Gerezani bus stop, Kivukoni bus stop, and …

Lead Acid Battery Recycling In The Current Tanzania Industrialization Drive: Challenges And Opportunities, Divina D. Kaombe

Tanzania Journal of Engineering and Technology (TJET)

ABSTRACT Advancements in automotive technologies, Information and Communications Technology and renewable energy technologies have increased the use of lead acid batteries as a source of portable and rechargeable energy. This has considerably increased the number of spent batteries with adverse effects on the environment and human health; which calls for recycling of spent batteries. This work was conducted to investigate challenges facing the formal business of recycling spent batteries and potential manufacturers of new lead-acid batteries in Tanzania. The work involved collection of information from key stakeholders such as collectors, dealers, Tanzania Revenue Authority and recyclers. It was found out …

Cyber-Secure Distributed Control Of Microgrids With Improved Communication And Control Protocols, Jee Won Choi

Mechanical Engineering ETDs

This dissertation proposes a cyber-secure distributed control of microgrids with improved communication and control protocols. The finite-time event-triggered control protocol for islanded AC and DC secondary control is introduced. For AC microgrids, the proposed strategy can effectively perform frequency restoration and voltage regulations while sharing the active and reactive power among the distributed generators (DGs) based on their power ratings. For DC microgrids, the proposed control protocol can provide accurate current sharing and critical bus voltage regulation. The finite-time control enables a system to reach a consensus in a finite period of time enhanced from asymptotic convergence. The event-triggered communication …

Material Characterization And Comparison Of Sol-Gel Deposited And Rf Magnetron Deposited Lead Zirconate Titanate Thin Films, Katherine Lynne Miles

Mechanical Engineering ETDs

Lead zirconate titanate (PZT) has been a material of interest for sensor, actuator, and transducer applications in microelectromechanical systems (MEMS). This is due to their favorable piezoelectric, pyroelectric and ferroelectric properties. While various methods are available to deposit PZT thin films, radio frequency (RF) magnetron sputtering was selected to provide high quality PZT films with the added capability of batch processing. These sputter deposited PZT films were characterized to determine their internal film stress, Young’s modulus, composition, and structure. After characterization, the sputtered PZT samples were poled using corona poling and direct poling methods. As a means of comparison, commercially …

Constraint-Aware, Scalable, And Efficient Algorithms For Multi-Chip Power Module Layout Optimization, Imam Al Razi

Graduate Theses and Dissertations

Moving towards an electrified world requires ultra high-density power converters. Electric vehicles, electrified aerospace, data centers, etc. are just a few fields among wide application areas of power electronic systems, where high-density power converters are essential. As a critical part of these power converters, power semiconductor modules and their layout optimization has been identified as a crucial step in achieving the maximum performance and density for wide bandgap technologies (i.e., GaN and SiC). New packaging technologies are also introduced to produce reliable and efficient multichip power module (MCPM) designs to push the current limits. The complexity of the emerging MCPM …

Renewable Energy Microgrids To Improve Electrification Rate In Democratic Republic Of Congo: Case Of Hydro, Municipal Waste And Solar, Ngondo Otshwe Josue, Aviti Thadei Mushi

Tanzania Journal of Engineering and Technology (TJET)

Worldwide, it is imperative for citizens to have access to electricity. This applies to Congolese--rural and urban dwellers, and if possible, it should be guaranteed by government’s laws and policies. Howev er, the rural and urban areas of Democratic Republic of Congo (DRC) suffer majorly from lack of access to electricity. The major reasons are the high costs associated with connection to the national central grid and production insufficiency. Therefore, one feasible approach to electrify these areas is to use microgrids. This technolo gy is decent and viable option for energy revolution since it incorpo rates energy storage systems, distributed …