Other Electrical and Computer Engineering Commons^™

Formula Sae Power Distribution Controller, Daniel Baron

Electrical Engineering

The Power Distribution Controller senior project aims to replace the current Power Distribution Module (PDM) on Cal Poly’s Formula SAE internal combustion vehicle with a more advanced, configurable, and reliable system. The Power Distribution Controller is a MOSFET based system that can be controlled through either controller area network or a parallel interface to distribute and control power from the vehicle’s battery to the several electrical devices on the car. The Power Distribution Controller also collects output voltage and current data, and communicates this data to the vehicle’s data logger. This will allow engineers to troubleshoot electrical problems on the …

Water Leak Detection System, Ryan T. Hanson

Electrical Engineering

The water supply shortage has increased in recent years due to overpopulation, climate change and obsolete water facilities, where deteriorated pipes cause most of the water leaks. The problem is not the size of the leak, but the time it takes to detect it. This paper presents the implementation of a system installed in the hydraulic facilities of a residence, to detect water leaks. The system consists of a water sensor installed by a water reservoir of interest, a microprocessor to interpret the data and evaluate whether it is a water leak or not, an SMS alert message, and an …

Data Fusion With 9 Degrees Of Freedom Inertial Measurement Unit To Determine Object’S Orientation, Long Dinh Tran

Electrical Engineering

Data fusion is a technique to integrate different types of data to a single unit to provide a more reliable representation of tracking measurement. Today, data fusion can be found in many applications such as tracking and surveillance system as well as on mobile applications. In this project, 9 Degrees of Freedom (DOF) Inertial Measurement Unit (IMU) composed of 3-axis Magnetometer, 3-axis Accelerometer, and 3-axis Gyroscope are processed to yield the object’s rotations in 3 dimensions. While the magnetometer (compass) is used to determine the heading angle, accelerometer is used to determine tilt axis, gyroscope can be process to calculate …

Improving A Particle Swarm Optimization-Based Clustering Method, Sharif Shahadat

LSU New Orleans Theses and Dissertations

This thesis discusses clustering related works with emphasis on Particle Swarm Optimization (PSO) principles. Specifically, we review in detail the PSO clustering algorithm proposed by Van Der Merwe & Engelbrecht, the particle swarm clustering (PSC) algorithm proposed by Cohen & de Castro, Szabo’s modified PSC (mPSC), and Georgieva & Engelbrecht’s Cooperative-Multi-Population PSO (CMPSO). In this thesis, an improvement over Van Der Merwe & Engelbrecht’s PSO clustering has been proposed and tested for standard datasets. The improvements observed in those experiments vary from slight to moderate, both in terms of minimizing the cost function, and in terms of run time.

Bendablesound: An Elastic Multisensory Surface Using Touch-Based Interactions To Assist Children With Severe Autism During Music Therapy, Franceli L. Cibrian, Oscar Peña, Deysi Ortega, Monica Tentori

Engineering Faculty Articles and Research

Neurological Music Therapy uses live music to improve the sensorimotor regulation of children with severe autism. However, they often lack musical training and their impairments limit their interactions with musical instruments. In this paper, we present our co-design work that led to the BendableSound prototype: an elastic multisensory surface encouraging users to practice coordination movements when touching a fabric to play sounds. We present the results of a formative study conducted with 18 teachers showing BendableSound was perceived as “usable” and “attractive”. Then, we present a deployment study with 24 children with severe autism showing BendableSound is “easy to use” …

An Exact Analysis For Four-Order Acousto-Optic Bragg Diffraction Which Incorporates Both Incident Light Angle And Sound Frequency Dependencies, Adeyinka Sunday Ademola

Electrical Engineering Theses

This thesis extends the prior work which produced an exact solution to the four-order acousto-optic (AO) Bragg cell with assumed fixed center frequency and with exact Bragg angle incident light. The extension predicts the model that incorporates the dependencies of both the input angle of light and the sound frequency. Specifically, a generalized 4^th order linear differential equation (DE), is developed from a simultaneous analysis of four coupled AO system of DEs. Through standard methods, the characteristic roots, which requires solving a quartic equation, is produced. Subsequently, a derived system of homogeneous solutions, which absorbs the roots obtained using …

Implementation Of Range Autofocus For Sar Radar Imaging, Nicholas J. Testin, Philip Davis

KSU Journey Honors College Capstones and Theses

The range calculation for an FMCW radar depends on accurate linear modulation. In some circumstances, linear modulation may not be available and must be corrected for. This paper describes an autofocus technique used to correct for phase error due to non-linearities in the components of a FMCW radar. Also described here is the algorithm used in calculating the phase error and application of the phase correction with triangle modulation. Known errors were calculated at certain distances and applied to correcting the phase of data taken at similar distances. The results given were generated using a SAR working outside linear ranges.

Comparing Multiple Turbulence Restoration Algorithms Performance On Noisy Anisoplanatic Imagery, Michael Armand Rucci, Russell C. Hardie, Alexander J. Dapore

Electrical and Computer Engineering Faculty Publications

In this paper, we compare the performance of multiple turbulence mitigation algorithms to restore imagery degraded by atmospheric turbulence and camera noise. In order to quantify and compare algorithm performance, imaging scenes were simulated by applying noise and varying levels of turbulence. For the simulation, a Monte-Carlo wave optics approach is used to simulate the spatially and temporally varying turbulence in an image sequence. A Poisson-Gaussian noise mixture model is then used to add noise to the observed turbulence image set. These degraded image sets are processed with three separate restoration algorithms: Lucky Look imaging, bispectral speckle imaging, and a …

On The Simulation And Mitigation Of Anisoplanatic Optical Turbulence For Long Range Imaging, Russell C. Hardie, Daniel A. Lemaster

Electrical and Computer Engineering Faculty Publications

We describe a numerical wave propagation method for simulating long range imaging of an extended scene under anisoplanatic conditions. Our approach computes an array of point spread functions (PSFs) for a 2D grid on the object plane. The PSFs are then used in a spatially varying weighted sum operation, with an ideal image, to produce a simulated image with realistic optical turbulence degradation. To validate the simulation we compare simulated outputs with the theoretical anisoplanatic tilt correlation and differential tilt variance. This is in addition to comparing the long- and short-exposure PSFs, and isoplanatic angle. Our validation analysis shows an …

A Novel Time-Domain Method Of Fault Diagnosis In Induction Motors, Bryan J. Davis

Honors Scholar Theses

This paper introduces a novel time-domain method for detecting the four major types of induction motor faults without requiring complex signal processing or additional sensors other than those already in place for closed-loop motor control. This method artificially modulates the motor current feedback signal with a perturbed frequency that oscillates about the characteristic frequency of the fault in question. After filtering out the unwanted frequency components that result from the modulation, the selected fault-indicative component is a very slow sinusoid that is only present when the fault is present. The method looks for this fault-indicative component by monitoring the time …

Project Halon: Engaging Secondary Students In High-Altitude Ballooning Experiments, James M. Taylor Jr., Derrick A. Nero

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Project HALON Overview

•Fewer US STEM graduates

•Shortage of STEM educators

•Lack of engaging, high quality STEM material in the classroom

•Potentially results in lower global economic competitiveness

Experiment Constraints

•Project brings together STEM major mentors and educators

•Builds understanding of research and operational challenges

•Students get excited about more complex experiments (CubeSATs)

HALON: High Altitude Learning Over Nebraska

•High altitude balloon lift platform

•Student-designed experiments tailored to student team abilities

•NASA-inspired near-space systems engineering process for tradeoffs

•Engagement / mentoring for pre-service and in-service educators

Laser Microphone, Michael Mckee

Thinking Matters Symposium Archive

The laser microphone is a multifaceted project. The main objective of this project is the design and construction of a laser microphone. This device is able to detect sound via variations in light waves. Production of this device being one obvious outcome of the project, observation and experimentation comprise the primary focus of the venture. Experiments reveal exactly how well this device is able to function and if it is able to be used in specific engineering applications. To function appropriately, this device should handle the translation from soundwaves to light waves with little to no alteration. Full signal analysis …

Transportation Engineering: Traffic Control Simulator, Sarah V. Hernandez, Karla Diaz-Corro, Taslima Akter, Magdalena Asborno, Fu Durandal

Civil Engineering Teaching and Learning

The purpose of these lesson plans is to introduce students to traffic signalization basics. Students will be lead through a series of mini-lectures on traffic control and signalization including a discussion on the limitations and benefits of traffic signalization. The lesson plans compliment a computer simulation “game” in which students act as manual operators for a single up to four by four gridded intersection. Students attempt to control the progression of signals to understand the relationship between signal timing and user delay. Through experimentation with the simulation, students generate a presentation discussing the benefits and drawbacks of signal timing and …

Rural Broadband Mobile Communications: Spectrum Occupancy And Propagation Modeling In Western Montana, Erin Wiles

Graduate Theses & Non-Theses

Fixed and mobile spectrum monitoring stations were implemented to study the spectrum range from 174 to 1000 MHz in rural and remote locations within the mountains of western Montana, USA. The measurements show that the majority of this spectrum range is underused and suitable for spectrum sharing. This work identifies available channels of 5-MHz bandwidth to test a remote mobile broadband network. Both TV broadcast stations and a cellular base station were modelled to test signal propagation and interference scenarios.

Centralized Control For Dc Microgrid Using Finite State Machine, Mahmoud Saleh, Yusef Esa, Ahmed Mohamed

Publications and Research

In this paper, an autonomous communication-based centralized control for DC microgrids (MG) has been developed and implemented. The proposed controller enables smooth transition between various operating modes. Finite state machine (FSM) has been used to mathematically describe the various operating modes (states), and events that may lead to mode changes (transitions). Therefore, the developed centralized controller aims at optimizing the performance of MG during all possible operational scenarios, while maintaining its reliability and stability. Results of selected cases have been presented. These results show stable transition between modes, verifying the validity and applicability of the proposed controller.

Workplace Posture Assessment And Biofeedback With Kinect, Matthew Crussell

Master's Theses

With the prevalence of computing, many workers today are confined to desk within an office. By sitting in these positions for long periods of time, workers are prone to develop one of many musculoskeletal disorders (MSDs), such as carpal tunnel syndrome. In order to prevent MSDs in the long term, workers must employ good sitting habits. One promising method to ensure good workplace posture is through camera monitoring. To date, camera systems have been used in determining posture in a clean environment. However, an occluded and cluttered background, which is typical in an office setting, imposes a great challenge for …

Feasibility Of Neural Networks For Maritime Visual Detection On A Mobile Platform, Robert Goring

Doctoral Dissertations and Master's Theses

Object detection through computer vision has traditionally been difficult to reliably implement due to various lighting conditions caused by weather and time of day. Any changes in conditions can be detrimental to the detector’s ability to accurately identify objects. A modern approach implements deep learning techniques to classify and train a neural network. While highly effective, this approach can be cumbersome and computationally intensive. This project will investigate the feasibility of using deep learning to detect, classify, and track objects in near real-time while being processed on a mobile platform. I will investigate the feasibility of these processes on a …

Physiologically-Aware Communication Architecture For Transmission Of Biomedical Signals In Basns For Emerging Iot Applications, Jose Santos, Dongming Peng, Hamid Sharif

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

This research work proposes a novel physiologicallyaware communication architecture for the transmission of biomedical signals in BASNs (Body Area Sensor Networks) and wearables for emerging IoT applications. The architecture to fulfill the following objectives:

• Reduce volume of biomedical data in IoT networks and Internet infrastructure.

• Minimize the required computational load of biomedical data on the cloud side.

• Extend the lifetime of the mobile wearable/BASN through improved energy savings.

This architecture is generalizable to class of biomedical signals. It prevents large volume of biomedical data to be generated; uses patient state to control almost any system parameter; achieves …

Reducing Graphene–Metal Contact Resistance Via Laser Nano-Welding, Kamran Keramatnejad, H. Rabiee Golgir, Y. S. Zhou, D. W. Li, X. Huang, Yongfeng Lu

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

The large graphene-metal contact resistance is a major limitation for development of graphene electronics. graphene behaves as an insulator for out-of-plane carrier transport to metallic contacts.

Laser nano-welding was developed and led to RC reductions of up to 84%.

Localized laser irradiation at the edges of graphene led to the formation of chemically active point defects.

Precise structural modifications and formation of G-M bonding led to improved carrier efficiency in graphene devices.

Experimental Validation Of A Heterogeneous Radar Clutter Statistical Estimation Method, Elliot R. Erstein

Theses and Dissertations

Radar clutter models are important for radar target detection when clutter is present. A new method for estimating single clutter type, homogeneous, radar clutter statistics through measurement of a multiple type, heterogeneous clutter was developed in 2015 by researchers at the Air Force Institute of Technology. The estimation method is greatly valued in the clutter research and modeling world for reducing clutter campaign measurement time and cost. This thesis looks at validation steps for the estimation method through the use of simulations and experimental radar clutter measurements.

Block Matching And Wiener Filtering Approach To Optical Turbulence Mitigation And Its Application To Simulated And Real Imagery With Quantitative Error Analysis, Russell C. Hardie, Michael Armand Rucci, Barry K. Karch, Alexander J. Dapore

Electrical and Computer Engineering Faculty Publications

We present a block-matching and Wiener filtering approach to atmospheric turbulence mitigation for long-range imaging of extended scenes. We evaluate the proposed method, along with some benchmark methods, using simulated and real-image sequences. The simulated data are generated with a simulation tool developed by one of the authors. These data provide objective truth and allow for quantitative error analysis. The proposed turbulence mitigation method takes a sequence of short-exposure frames of a static scene and outputs a single restored image. A block-matching registration algorithm is used to provide geometric correction for each of the individual input frames. The registered frames …

Simulation Of Anisoplanatic Imaging Through Optical Turbulence Using Numerical Wave Propagation With New Validation Analysis, Russell C. Hardie, Jonathan D. Power, Daniel A. Lemaster, Douglas R. Droege, Szymon Gladysz, Santasri Bose-Pillai

Electrical and Computer Engineering Faculty Publications

We present a numerical wave propagation method for simulating imaging of an extended scene under anisoplanatic conditions. While isoplanatic simulation is relatively common, few tools are specifically designed for simulating the imaging of extended scenes under anisoplanatic conditions. We provide a complete description of the proposed simulation tool, including the wave propagation method used. Our approach computes an array of point spread functions (PSFs) for a two-dimensional grid on the object plane. The PSFs are then used in a spatially varying weighted sum operation, with an ideal image, to produce a simulated image with realistic optical turbulence degradation. The degradation …

Optimized Trajectory Generation For Car-Like Robots On A Closed Loop Track, Tyler Friedl

Electronic Theses and Dissertations

This thesis presents a method for generating an optimized path through a given track. The path is generated by choosing waypoints throughout the track then iteratively optimizing the position of these waypoints. The waypoints are then connected by optimized paths represented by curvature polynomials. The end result is a path through the track represented as a spline of curvature polynomials. This method is applied to multiple simulated tracks and the results are presented. By generating and representing the paths in the continuous domain, the method has improved computational efficiency from many of the discrete methods used to generate an optimal …

Data-Centric Situational Awareness And Management In Intelligent Power Systems, Xiaoxiao Dai

Electronic Theses and Dissertations

The rapid development of technology and society has made the current power system a much more complicated system than ever. The request for big data based situation awareness and management becomes urgent today. In this dissertation, to respond to the grand challenge, two data-centric power system situation awareness and management approaches are proposed to address the security problems in the transmission/distribution grids and social benefits augmentation problem at the distribution-customer lever, respectively.

To address the security problem in the transmission/distribution grids utilizing big data, the first approach provides a fault analysis solution based on characterization and analytics of the synchrophasor …

Automatic Power Management For Instructional Computers At Humboldt State University: A Calculation Of Potential Energy Savings And Greenhouse Gas Emissions Reductions, Nicholas F. Flenghi

Projects

Computers consume an estimated 5,610 GWh per year in California alone. Much of that energy is consumed by computers that are not being used. In this project, detailed user login data are used to estimate the energy consumption of instructional computers at Humboldt State University (HSU) over the course of one semester. The data are also used to estimate the potential energy savings from automating the shutdown process. Potential cost savings and greenhouse gas (GHG) emissions reductions resulting from implementing an automatic-shutdown power management plan are also calculated.

There are approximately 1,000 computers used for teaching and learning purposes at …

Design, Modeling, Fabrication, And Testing Of A Multistage Micro Gas Compressor With Piezoelectric Unimorph Diaphragm And Passive Microvalves For Microcooling Applications, Shawn Thanhson Le

Doctoral Dissertations

This dissertation investigates the development of a multistage micro gas compressor utilizing multiple pump stages cascaded in series to increase the pressure rise with passive microvalves and piezoelectric unimorph diaphragms. This research was conducted through modeling, simulation, design, and fabrication of the microcompressor and its components. A single-stage and a two-stage microcompressor were developed to demonstrate and compare the performance and effectiveness of using a cascaded multistage design.

Steady fluid flow through static microvalves structure was studied to gain insight on its gas flow dynamics and characteristics. Transient analysis combined with the structure's interaction was investigated with an analytical model …

Performance Comparison Of Binarized Neural Network With Convolutional Neural Network, Lopamudra Baruah

Dissertations, Master's Theses and Master's Reports

Deep learning is a trending topic widely studied by researchers due to increase in the abundance of data and getting meaningful results with them. Convolutional Neural Networks (CNN) is one of the most popular architectures used in deep learning. Binarized Neural Network (BNN) is also a neural network which consists of binary weights and activations. Neural Networks has large number of parameters and overfitting is a common problem to these networks. To overcome the overfitting problem, dropout is a solution. Randomly dropping some neurons along with its connections helps to prevent co-adaptations which finally help in reducing overfitting. Many researchers …

Substrate Integrated E-Plane Horn Antenna And Antenna Array, Zhewei Gu

All Graduate Theses, Dissertations, and Other Capstone Projects

In this paper, a novel SMA fed substrate integrated E-plane horn antenna and antenna array are proposed. The substrate integrated E-plane waveguide (SIEW) is not only able to integrate conventional waveguide circuits on printed circuit boards (PCB), but also especially falls into all E-plane circuits which substrate integrated waveguide (SIW) technique fails to. Essential copper strips are sandwiched in the middle by two PCBs to support longitudinal current in the E-plane fed through an SIEW-to-SMA transition. Copper plated holes aligned along the wave propagation direction are drilled through the substrate and copper strips, so that vertical current in the H-plane …

Optimized Endpoint Delivery Via Unmanned Aerial Vehicles, Fuad Gazal

All Graduate Theses, Dissertations, and Other Capstone Projects

Unmanned Aerial Vehicles (UAVs) are remotely piloted aircraft with a range of varying applications. Though early adoption of UAVs focused on military applications, surveillance, photography, and agricultural applications are presently on the rise. This work aims to ascertain how UAVs may be employed to elicit deceased transportation times, increased power efficiency, and improved safety. Resulting in optimized end point delivery. A combination of tools and techniques, involving a mathematical model, UAV simulations, redundant control systems, and custom designed electrical and mechanical components were used towards reaching the goal of a 10-kilogram maximum payload delivered 10 miles under 30 minutes. Two …

Feature And Decision Level Fusion Using Multiple Kernel Learning And Fuzzy Integrals, Anthony Pinar

Dissertations, Master's Theses and Master's Reports

The work collected in this dissertation addresses the problem of data fusion. In other words, this is the problem of making decisions (also known as the problem of classification in the machine learning and statistics communities) when data from multiple sources are available, or when decisions/confidence levels from a panel of decision-makers are accessible. This problem has become increasingly important in recent years, especially with the ever-increasing popularity of autonomous systems outfitted with suites of sensors and the dawn of the ``age of big data.'' While data fusion is a very broad topic, the work in this dissertation considers …