Nanotechnology Fabrication Commons^™

Rapid-Prototyping Nanofabrication: Lcd-Based Projection Lithography And Physical Vapor Deposition, Sabeel Saleem Mohammmed

University Honors Theses

The semiconductor industry's continued growth, driven in large part by demand for artificial intelligence hardware, has highlighted the need for greater workforce development in regions adjacent to major fabrication centers like Oregon's Silicon Forest. This capstone project lays the groundwork for a small scale and student led semiconductor fabrication lab at Portland State University by demonstrating two of the core steps in chip manufacturing: photolithography and thin film deposition. Rather than relying on conventional fixed reticles, this work explores a unique, low cost approach to patterning that uses an ultraviolet-compatible liquid crystal display (LCD) as a programmable reticle, allowing arbitrary …

Designing Enhanced Nonlinearity In Plasmonic Devices With Epsilon-Near-Zero Films, Kevin Tran Le

Electrical Engineering and Computer Science (MS) Theses

The growing demand for energy-efficient optical information processing motivates compact nonlinear photonic devices that can operate at low power. Silicon photonics is a mature platform for linear optical functions, but nonlinear operation remains challenging because of its weak Kerr response, two-photon absorption at telecommunication wavelengths, and limited compatibility with deeply subwavelength plasmonic confinement. This thesis computationally investigates epsilon-near-zero thin films integrated into plasmonic waveguide architectures as a route toward stronger light–matter interaction in compact nonlinear devices.

Two waveguide geometries are examined: a hybrid metal-insulator-metal plasmonic slab waveguide incorporating an ultrathin indium tin oxide epsilon-near-zero layer (5–50 nm), and a dielectric-loaded …

​Autonomous Agentic Orchestration For Physics-Aware Scientific Discovery: An Integrative Multimodal Framework For 2d Material Characterization​, Sankalp Pandey

Electrical Engineering and Computer Science Undergraduate Honors Theses

The advancement of next-generation semiconductor and quantum technologies relies on the scalability of the fabrication of two-dimensional (2D) van der Waals heterostructures. However, this process is severely bottlenecked by characterization workflows. Optical microscopy provides high-throughput imaging of 2D material flakes, but lacks the explicit physical priors required for the discernment of sub-nanometer thickness variations, such as distinguishing monolayers from bilayers. The use of computer vision models to automate the localization and characterization process of the flakes was proposed. As a part of this effort, we develop QuantumFlake, an open-source framework to streamline the integration and deployment of computer vision models …

Nanomagnet Based Reservoir Computing And Quantum Control, Fahim F. Chowdhury

Theses and Dissertations

Conventional CMOS scaling has driven remarkable advances in computing but faces increasing physical and energy constraints, motivating alternative computing paradigms that integrate memory and computation while improving energy efficiency. Nanoscale magnetic systems offer a promising platform for such approaches because their intrinsic nonlinear dynamics and localized magnetic fields can support both classical and quantum information processing. This thesis investigates nanomagnetic systems for physical reservoir computing and, with primary emphasis, for localized quantum control of spin qubits.

The first part explores dipole-coupled nanomagnet arrays as physical reservoirs. Micromagnetic simulations demonstrate nonlinear dynamical behavior with high short-term memory and parity-check capacity, enabling …

Nanomagnet Based Straintronic Devices For Unconventional Computing: Simulation And Performance Analysis, Rahnuma Rahman

Theses and Dissertations

Nanomagnetic devices are of great interest in digital hardware because of their non-volatility and dynamic ability to change magnetization but suffer from high switching error rates and temperature sensitivity. Magnetostrictive nanomagnets that utilize strain to switch between stable magnetization states encoding bit information are of interest since they are extremely energy efficient as piezoelectric layers can be used to rotate magnetization that have switching energies in the range of attojoules. Their stochasticity can also be useful in probabilistic, analog, neuromorphic, and collective computing systems, where occasional switching errors are not devastating. The dissertation extends spintronics beyond conventional computing schemes by …

Numerical Analysis And Simulation Of Enhanced Performance In Nanowire Cds/Cdte Solar Cells: A Pathway To Greater Than 25% Efficient Cdte Solar Cell, Riasad Badhan

Theses and Dissertations--Electrical and Computer Engineering

This Thesis finds a pathway to a significantly high-efficient CdTe based solar cell by demonstrating and harvesting the advantages of a nano-structure configuration in CdTe based solar cells. Nanowire CdS window layer and the “control”, planar CdS window layer films were fabricated in the laboratory and compared for their optical transmission and other characteristics affecting the performance of the CdS-CdTe solar cell. Numerical simulations were performed for a comparative evaluation of the embedded nanowire CdS-CdTe solar cell device and the traditional planar CdS-CdTe solar cell device. Experimentally measured spectral transmission of nanowire CdS film was used in the simulation environment. …

Design Of Energy-Efficient, Scalable, And Flexible Tensor Processing Architectures With Electro-Photonic Integrated Circuits, Oluwaseun Alo

Theses and Dissertations--Electrical and Computer Engineering

In recent years, artificial intelligence has achieved remarkable success across domains such as computer vision, natural language processing, and scientific computing. This progress has been driven largely by advances in deep learning, particularly deep neural networks (DNNs), including convolutional neural networks (CNNs) and transformer-based models. While these models deliver unprecedented accuracy, often surpassing human performance, their computational complexity continues to grow rapidly due to multibillion- and trillion-parameter designs. As model sizes and deployment scales expand, the demand for energy-efficient and high-throughput hardware accelerators has intensified. Conventional electronic platforms based on CPUs, GPUs, ASICs, and FPGAs are increasingly constrained by the …

Nanostructured Cathode Catalysts For Aem Electrolysis: From Catalyst Design To Degradation And Hydrogen Dynamics, Yamini Kumaran

Electronic Theses & Dissertations (2024 - present)

Anion exchange membrane water electrolysis (AEMWE) presents a promising pathway toward cost-effective and sustainable hydrogen production by integrating the chemical robustness of alkaline systems with the compact, zero-gap design of proton exchange membrane electrolyzers. However, the widespread implementation of AEMWE is limited by the availability of highly active and durable platinum-group-metal (PGM)-free catalysts and by an incomplete understanding of their degradation behavior under realistic operating conditions.

This dissertation focuses on the development, characterization, and mechanistic investigation of nanostructured MoNi₄–MoO₂-based electrodes for efficient and stable hydrogen generation under alkaline and membrane-integrated environments. MoNi₄–MoO₂ nanorods …

Development Of Alternative Plasma Etching Techniques For The Selective Removal Of Tan With Respect To Sioch Dielectric Materials To Enable Future Back-End-Of-The-Line Scaling, Ivo Otto Iv

Electronic Theses & Dissertations (2024 - present)

Transistor scaling has continued according to Moore’s Law for over fifty years. As transistor size decreases, adequate power delivery is required to enable transistor scaling without performance loss. Power delivery is provided by a metal interconnect network with insulating dielectric that connects the transistor level to the power source, the signal speed within this metal line network limiting transistor level switching speeds. Reduction of signal delay has moved from primarily dimension-based improvement towards adoption of conductor and dielectric materials with lower resistivity and a reduced dielectric constant value, respectively: transitioning from Al/SiO₂ to Cu/low-κ SiOCH. With this transition comes …

Next-Generation Computing Hardware: Advancements In Tantalum Oxide Reram For Ai And Neuromorphic Applications, Rajas Ravindra Mathkari

Electronic Theses & Dissertations (2024 - present)

The rapid development of artificial intelligence, machine learning, and data-intensive computing has exposed the fundamental limitations of conventional von Neumann architectures, in which energy and time are continuously lost transferring data between physically separate memory and processing units. In contrast, the human brain performs complex computations directly at the point of memory storage through billions of parallel synaptic connections, a paradigm known as in-memory computing. Realizing this in hardware requires memory devices that are fast, energy-efficient, non-volatile, and capable of storing multiple resistance levels in an analog manner. Resistive Random Access Memory (ReRAM) based on tantalum oxide (TaOx) is one …

Investigation Of Fine-Grain Cu And Cu Alloys For Low-Temperature Hybrid Bonding Applications, Sarabjot Singh

Electronic Theses & Dissertations (2024 - present)

Hybrid bonding has emerged as a key enabler for next-generation three-dimensional (3D) integration, offering fine-pitch interconnects and improved electrical performance. However, conventional Cu–Cu hybrid bonding typically requires elevated temperatures to achieve sufficient diffusion and interface quality, posing challenges for temperature-sensitive device integration and process compatibility. This work investigates materials engineering approaches to enable low-temperature Cu–Cu bonding through both microstructure design and alloying strategies.

This work begins by examining grain refinement in Cu as a pathway to enhance diffusion through increased grain boundary density, providing efficient atomic transport without introducing additional elements. Three Cu-based systems Cu–Co, Cu–Ag, and Cu–Al were systematically …

Development Of Periodic Plasmonic Nano-Structures For Enhanced Labeled Bio-Sensing Systems, Kyle Zackary Smith

Graduate Theses, Dissertations, and Problem Reports (ETD)

The biomedical industry has seen sustained growth over the past half century, with a continually increasing demand for flexible, easy-to-use, and cost-effective tools. One large area of commercial interest has been point-of-use or point-of-care diagnostics, using optical based Lab-On-Chip (LOC) style systems. Label and label-free fluorescence detection systems are common benchtop modalities that have seen recent integration into these portable, cost-effective LOC applications. However, despite their maturity, there are still opportunities to improve device characteristics, specifically in reference to throughput, limit-of-detection (LOD), and hybrid integration (along with associated costs).

Optical research avenues at WVU have focused on improving these systems …

Nanofibrous Materials And Nanoparticles For Combating Antimicrobial Resistance: Synthesis, Integration, And Translational Perspectives, Rewati Raman Ujjwal, Ashish Dilip Sutar, Rahul Shukla, Gymama Slaughter

Center for Bioelectronics Publications

Antimicrobial resistance (AMR) is a major global health challenge driven by mechanisms such as biofilm formation, efflux pumps, and genetic mutations. Nanoparticulate and fibrous materials have emerged as promising strategies to overcome these limitations through multimodal antimicrobial action and controlled drug delivery. This review highlights recent advances in electrospun nanofibrous systems, including natural and synthetic polymer-based scaffolds, stimuli-responsive nanofibers, and functionalized patches. Nanoparticle-loaded nanofiber systems demonstrate enhanced performance, including bacterial eradication, sustained drug release, and significant biofilm disruption. Multifunctional systems combining antimicrobial, antioxidant, and immunomodulatory properties further show synergism. Emerging innovations, such as piezoelectric and smart sensing systems, enable self-powered …

Design, Modeling, And Experimental Development Of Nanoscale Confinement Structures On Planar Silicon-Based Microelectrode Arrays For Single-Entity Electrochemical Sensing, Parinaz Eskandari

Dissertations, Master's Theses and Master's Reports

Electrochemical sensing is widely used for chemical and biological detection due to its high sensitivity, label-free operation, and compatibility with miniaturized electronic systems. However, conventional microelectrode platforms operate in an ensemble-averaged regime in which the measured current represents the collective response of many molecules interacting with the electrode surface. This ensemble averaging masks localized nanoscale electrochemical events and limits the ability to detect rare interactions, such as single molecules or nanoparticles. Achieving single-entity electrochemical detection therefore requires strategies that confine electrochemical reactions to nanoscale regions while maintaining compatibility with scalable planar microfabrication.

This dissertation investigates nanoscale electrochemical confinement on planar …