Nanotechnology Fabrication Commons^™

Impact Of Ethanol On The Evolution Of One-Step Synthesized Gold Nanoplates And Nanostars And Their Effects On Raman Signal Enhancement, Ananda Fania, Nonni Soraya Sambudi, Kirana Yuniati Putri, Yuliati Herbani, Affi Nur Hidayah

Makara Journal of Science

Gold nanoplates and nanostars were synthesized from a gold metal salt solution (HAuCl₄) using a one-step synthesis method of ultraviolet C (UVC) light irradiation. The gold salt solution was mixed with ethanol in 6 mL with the following ratios: (1.5:4.5, 3:3, and 4.5:1.5), and subsequently irradiated with UVC light. Changes in localized surface plasmon resonance (LSPR) shifts were observed in real time at 30-min intervals for 2 h. The synthesis process produces gold nanoplates. While gold nanostars were synthesized from a solution of gold salt combined with ethanol, ascorbic acid, and AgNO₃, maintaining a consistent ratio …

Test Data: Raised Or Recessed? Finding The Optimal Gate Architecture For Improving The Static Performance Of Graphene Transistors, Ivan Puchades, Tzu-Jung Huang, Andrew Spencer, Luke Ingraham, Anibal Pacheco

Data

As silicon CMOS technology approaches its scaling limits, graphene offers a compelling alternative as the active material channel in transistors due to its high carrier mobility and atomically thin profile, which provide strong electrostatic control and promise high-performance analog applications. However, roadblocks such as device-to-device variation, high contact resistance, poor dielectric interfaces, and non-uniform graphene quality have limited the adoption of graphene field effect transistors (GFETs). Hence, further investigations are required for mitigating these issues at a material, e.g., by improving graphene transfer, and device level, e.g., by finding an appropriate gate architecture. In this work, we directly compare two …

Exploratory Study Of Semiconductor Nanomembranes In Em Applications, Grant D. Heileman

Electrical and Computer Engineering ETDs

Antenna systems are a cornerstone of modern technologies, playing an increasingly vital role in their advancement. As demand for compact, high-performance, and adaptable communication platforms grows reconfigurable antenna technologies are becoming essential. This research explores a novel front-end reconfigurable antenna system (FERAS) architecture that leverages the mechanical flexibility and photoconductive behavior of semiconductor nanomembrane (SNM) devices. By exploiting the emergent properties of ultra-thin silicon (Si) or gallium arsenide (GaAs) nanomaterials and optically exciting these samples using vertical-cavity surface-emitting laser (VCSEL) arrays, this study develops lightweight, low-cost, deployable antenna structures for satellite communications, remote sensing, GPS, and radar. Despite their significant …

Developing A Low-Temperature Pathway For The Synthesis Of Two-Dimensional Ws2 Nanosheets, Akhil Potdar

Holster Scholar Projects

Since their discovery in 2004, two-dimensional (2D) materials have attracted great attention due to their unique mechanical, electrical, and chemical properties. However, their integration into devices is limited by the high temperatures required for crystalline growth, which prevents the use of flexible and biocompatible substrates like polymers for biomedical and next-generation electronic devices. This project aims to therefore develop a low-temperature synthesis process for two-dimensional tungsten disulfide (WS₂), a material particularly promising due to its tunable bandgap and biocompatibility. We propose that by first depositing an intermediate tungsten oxide film (WOx) via Hollow Cathode Plasma-Assisted Atomic Layer Deposition (HCP-ALD) and …

Colloidal Quantum Dots: A Path Toward Making Mid-Wave Infrared Sensing A Ubiquitous Technology, Mohammad Mostafa Al Mahfuz

Dissertations

Reducing the size, weight, power consumption, and cost (SWaP-C) of infrared detectors could make infrared sensing more widely accessible. In the critical mid-wavelength infrared (MWIR) spectral range of 3-5 gm, commercially available detectors are limited by the high costs associated with epitaxial growth and hybridization, as well as the need for cryogenic cooling. These factors restrict their use to defense and space applications.

Colloidal quantum dots present a promising material for overcoming these challenges, with wafer-scale monolithic integration and Auger suppression being the key material capabilities to minimize the sensor's SWaP-C. Infrared sensors based on colloidal quantum dots have been …

Design Of A Subthreshold Cmos Inverter-Based Amplifier For Low-Noise And Low-Power Applications, Landon Alexander Schmucker

Electrical and Computer Engineering ETDs

Amplification is a fundamental function in most analog circuits. There is a fast-growing demand for low-power, low-noise, and high-gain amplifiers. Modern semiconductor processes are increasingly optimized for digital applications, which has introduced new challenges in analog design. To address these challenges, analog designers have investigated replacing conventional analog circuits with digital implementations. One promising application is the typical CMOS inverter as an amplifier.

This research presents a CMOS inverter-based amplifier with feedback designed to achieve low power consumption, low input noise, and high gain. Unlike typical CMOS inverter-based amplifiers, this topology has two distinctive features: (1) it uses a MOSFET …

Functional Devices Based On Freestanding 2d Materials, Shijue Xu

McKelvey School of Engineering Graduate Student Theses & Dissertations

Two-dimensional (2D) materials have attracted extensive attention in the field of nanoelectronics due to their atomic-scale thickness, high surface-to-volume ratio, tunable electronic properties, and compatibility with low-temperature processing. These characteristics make them highly suitable for the construction of emerging device architectures, particularly in both ionic and electronic devices.

In this work, we investigate the application of 2D materials in two distinct classes of devices: ionically-driven memristors and electronically-dominated metal–semiconductor contacts. For the memristor study, we fabricate heterostructure-based resistive switching devices using h-BN and WSe₂ as active layers. These 2D material-based memristors exhibit stable power consumption loops and high linearity …

Automation Programming For Uhv-Cvd Growth Of Group Iv Materials, William Hay

Electrical Engineering and Computer Science Undergraduate Honors Theses

The automation programming of a UHV-CVD reactor for group IV materials was performed. The reactor was programmed to perform all the necessary functions for a Germanium (Ge) growth with little response from the user. The overall goal was to fix an Argon purge program to clean out the process chamber of gases and create an Excel output program to ease any work on the user. There were also general fixes and address name changes that occurred throughout the program. Then, a one step and two step growth of a Ge material was formed in a UHV-CVD reaction for analysis. Germanium …

Adaptive Control System Of Nonlinear Dynamic Object On The Basis Of Neuro-Fuzzy Networks, Isomiddin Xakimovich Siddikov, Dilnoza Maxamadjanovna Umurzakova

Technical science and innovation

The presented paper is devoted to the development of an adaptive control system for a nonlinear dynamic object using neuro-fuzzy networks. The authors note that in real conditions dynamic objects function under conditions of uncertainty, which are characterised by complex and poorly understood relationships between technological variables, the presence of perturbing and random disturbances, as well as nonlinear elements. This makes it difficult to apply traditional linear adaptive control algorithms. The use of self-organising adaptive control is proposed, in which the mathematical model of the controlled system is formed by operational identification during system operation. It is shown that linear …

A 0.18 Μm Cmos 40 Ghz Miniaturized Coupled-Line Coupler With Enhanced Directivity, Elsayed Ibrahim Elsaidy, Amr H. Hussein Prof.Dr., Mustafa M. Abd Elnaby Prof. Dr., Anwer S. Abd El-Hameed Dr.

Journal of Engineering Research

No abstract provided.

Guided-Mode Resonant Nanopatterns For Raman Generation And Photonic Devices, Renjie Chen

Electrical Engineering Dissertations - Archive

This dissertation explores advanced strategies for enhancing Raman amplification in silicon photonic devices, focusing on guided-mode resonance engineering and resonant mode manipulation. Silicon, despite its indirect bandgap, exhibits a strong Raman scattering coefficient, enabling it to function as a viable gain medium for integrated photonic systems. However, the realization of efficient, compact, and low-threshold silicon Raman amplifiers and lasers necessitates innovative design approaches that overcome inherent material and structural limitations.

The first chapter provides a fundamental overview of optics, including physical principles, spectral characteristics, guided-mode resonance, simulation methods, and nanopattern fabrication methods.

The second chapter delves into silicon-based Raman amplification …

Photonic Crystal Devices For Chip Scale Sensing Systems, Yudong Chen

Electrical Engineering Dissertations - Archive

This thesis investigates the design and integration of photonic crystal (PC) structures for compact, high-performance optical platforms, with a focus on applications in gas sensing, on-chip lasers, and flat optics. Chapter 1 introduces the fundamental principles of PC design and simulation, highlighting their potential to replace bulky components in micro-gas chromatography (µGC) systems through miniaturization and integration. Chapter 2 explores PC-based nanobeam lasers, including the Lambda-Scale Embedded Active-Region Photonic Crystal (LEAP) laser, which demonstrates strong optical confinement and energy-efficient operation, with energy consumption as low as 8 fJ/bit. These laser designs are evaluated for their suitability in low-power, high-speed on-chip …

Metasurfaces And Their Applications In Photonic Devices, Shuwei Guo

Dissertations and Theses

Metasurfaces are flat artificial optical elements composed of dielectric and/or metallic nanostructures. They can manipulate light in unprecedented ways by altering amplitude, phase, and polarization at subwavelength scales. The ability of these two-dimensional elements to perform multiple optical functions within compact optical systems—while offering high functionality, small form factors, and easy integration into optoelectronic devices—has sparked significant interest across various fields and industries. These applications span imaging, sensing, nonlinear and quantum optics, optical computing, automotive technology, augmented and virtual reality, and more.

In this dissertation, we explore and design new multifunctional metasurfaces with a focus on manipulating spectral responses. First, …

Epitaxial Quantum Dot Scintillators With Monolithic Photodetector Integration: Physics, Fabrication And Characterization Of Materials And Devices, Allan Oreave Minns

Electronic Theses & Dissertations (2024 - present)

This dissertation discloses the physics, fabrication, and characterization of high-performance scintillator detectors based on epitaxial InAs quantum dots (QDs) in GaAs. The detector crystals grown include monolithically integrated In_0.35GaAs photodetectors with Al_0.92-0.6In_0.03-0.35Ga_0.05As metamorphic buffer layers (MBL). A device fabrication process was developed for the lithographic patterning, chemical etching, contact metallization and readout integration of materials grown by means of molecular beam epitaxy (MBE) on 3-inch GaAs (001) wafers. Low capacitance integration with readout electronics was achieved through wire bonds to custom printed circuit boards (PCBs) with commercial components.

The relationship between device …

Surface Morphology And Moisture Adsorption/Desorption Characteristics Of Hybrid-Dielectric Moisture Sensors, Ronak Ali

Theses and Dissertations--Electrical and Computer Engineering

Relative humidity sensors are used for high-humidity measurement. Moisture sensors, or dew point sensors are used for low-humidity measurement (< 1 ppm_v). The dissertation contains two parts of studies. In the first part, the effect of surface morphology on the response speed of moisture sensors is studied. Moisture sensors using α-Al₂O₃ films as porous dielectric materials deposited by anodic spark deposition are studied. In this part of the study, a variety of small pores have been studied to investigate the response speed of moisture sensors. Three different surface morphologies have been studied using scanning electron microscopy. One …

Effect Of Activation Temperature On Quantum Efficiency And Lifetime Of Nea Truncated Nanocone Array Gaas Photocathode, Md. Aziz Arroyo Rahman, Md Abdullah Mamun, Shukui Zhang, Hani E. Elsayed-Ali

Physics Faculty Publications

This study investigates the quantum efficiency (QE) and operational lifetime of a negative electron affinity GaAs truncated nanocone array (TNCA) photocathode benchmarked against a conventional flat GaAs photocathode under varying activation temperatures. The TNCA structure demonstrated a QE of up to 13.6% at 590 nm with room temperature (RT) activation—approximately 1.5 times higher than its flat counterpart. This enhancement is due to Mie resonance effects within the nanostructure, as confirmed by finite-difference time-domain simulations. Moreover, the TNCA photocathode exhibits significantly extended charge lifetime, with enhancement factors of ∼6.1 and ∼19.8 under RT and 50 °C activations, respectively. These gains are …

Advancing 4h-Silicon Carbide Power Mosfets Through Three-Dimensional Technology Computer Aided Design Optimization, Skylar A. Deboer

Electronic Theses & Dissertations (2024 - present)

This research contributes to the advancement of 1.2 kV 4H-Silicon Carbide (SiC) Metal-Oxide-Semiconductor Field-Effect Transistors (MOSFETs) through the development and implementation of sophisticated three-dimensional Technology Computer-Aided Design (3D TCAD) methodologies. These advanced simulation techniques enable comprehensive evaluation of innovative unit cell architectures that remain inaccessible to conventional two-dimensional (2D) TCAD approaches. By leveraging these 3D simulation capabilities, this work facilitates significant improvements in both the performance and reliability of next-generation wide-bandgap power devices.

Power devices convert electrical energy between different forms throughout the power grid making them essential in applications ranging from personal electronics, electric vehicles, renewable energy systems, industrial …