Nanotechnology Fabrication Commons^™

Investigation Of The Effects Of Rapid Thermal Annealing On Mbe Grown Gaasbi/Gaas Heterostructures For Optoelectronic Devices, Perry C. Grant

Graduate Theses and Dissertations

High efficiency optoelectronic devices rely on high quality materials making up the device structure. The scope of this thesis investigates the effectiveness of rapid thermal annealing (RTA) at improving the material quality of GaAsBi/GaAs heterostructures. During the fabrication of a device, the contacts of the device had the rapid thermal annealing process accomplished to produce ohmic contacts and this research explored if this annealing treatment degraded the quantum wells that made up the active region of a device. To investigate these effects, a system to measure the photoluminescence of the material system was constructed utilizing Fourier Transform Infrared Spectroscopy. The …

Monodentate, Bidentate And Photocrosslinkable Thiol Ligands For Improving Aqueous Biocompatible Quantum Dots, Hiroko Takeuchi

Graduate Theses and Dissertations

Water-soluble Quantum Dots (QDs) are highly sensitive fluorescent probes that are often used to study biological species. One of the most common ways to render QDs water-soluble for such applications is to apply hydrophilic thiolated ligands to the QD surface. However, these ligands are labile and can be easily exchanged on the QD surface, which can severely limit their application. As one way to overcome this limitation while maintaining a small colloidal size of QDs, we developed a method to stabilize hydrophilic thiolated ligands on the surface of QDs through the formation of a crosslinked shell using a photocrosslinking approach. …

Finite-Difference Time-Domain Simulation Of Photovoltaic Structures Using A Graphical User Interface For Meep, Xin Tze Tee, Peter Bermel

The Summer Undergraduate Research Fellowship (SURF) Symposium

There is a large and growing need for accurate full-wave optical simulations of complex systems such as photovoltaic (PV) cells, particularly at the nanoscale. A finite-difference time-domain tool known as MEEP offers this capability in principle, through C++ libraries and the Scheme programming language. For expert users, this approach has been quite successful, but there is also great interest from new and less frequent users in starting to use MEEP. In order to facilitate this process, we have developed a graphical user interface (GUI) for MEEP, geared toward simulation of 2D and 3D PV cell geometries, freely available through a …

Mems Lab Simulation Tool, Oluwatosin D. Adeosun, Sambit Palit, Ankit Jain, Muhammad A. Alam

The Summer Undergraduate Research Fellowship (SURF) Symposium

MEMS actuators have multiple design applications. Understanding their behavior as well as the ability to predict their actuation characteristics and voltage response is important when designing these actuators. In order to know these devices will behave, designers have to solve multiple analytical equations and experiments that can be very time consuming. Over the course of the summer a tool was created on nanoHUB that will allow users to enter information about a MEMS actuator and provide the voltage response of the actuator. To create the tool, scaling equations were first provided for various geometry configurations and the equations were next …

Stanford Stratified Structure Solver (S4) Simulation Tool, Chang Liu, Xufeng Wang, Peter Bermel

The Summer Undergraduate Research Fellowship (SURF) Symposium

The Stanford Stratified Structure Solver (S4) developed in 2012 allows for fast, accurate prediction of optical propagation through complex 3D structures. However, there have been two key challenges preventing wider use to date: the use of a specialized control language, and the difficulty of incorporating realistic materials parameters. In this project, both concerns have been addressed. We have constructed a graphical user interface as an alternative, using the open-source Rappture platform on nanoHUB. This has been combined with a comprehensive materials database known as PhotonicsDB, which incorporates materials optical data drawn from carefully vetted sources. An Octave script file was …

Thermophotovoltaic System Efficiency Simulation, Qingshuang Chen, Roman Shugayev, Peter Bermel

The Summer Undergraduate Research Fellowship (SURF) Symposium

Thermophotovoltaic (TPV) power systems, which convert heat into electricity using a photovoltaic diode to collect thermal radiation, have attracted increasing attention in recent work. It has recently been proposed that new optical structures such as photonic crystals can significantly improve the efficiency of these devices in two ways. First, the electronic bandgap of the TPV diode should match the photonic bandgap of the emitter, in order to ensure that the majority of emitted photons can be converted. Second, a photonic crystal short-pass optical filter can be added to the front of the TPV diode to send long wavelength photons back …

Metal-Assisted Etching Of Silicon Molds For Electroforming, Ralu Divan, Dan Rosenthal '14, Karim Ogando, Leonidas E. Ocola, Daniel Rosenmann, Nicolaie Moldovan

Student Publications & Research

Ordered arrays of high-aspect-ratio micro/nanostructures in semiconductors stirred a huge scientific interest due to their unique one-dimensional physical morphology and the associated electrical, mechanical, chemical, optoelectronic, and thermal properties. Metal-assisted chemical etching enables fabrication of such high aspect ratio Si nanostructures with controlled diameter, shape, length, and packing density, but suffers from structure deformation and shape inconsistency due to uncontrolled migration of noble metal structures during etching. Hereby the authors prove that a Ti adhesion layer helps in stabilizing gold structures, preventing their migration on the wafer surface while not impeding the etching. Based on this finding, the authors demonstrate …

Multiscale Study Of Batio3 Nanostructures And Nanocomposites, Lydie Louis Louis

Graduate Theses and Dissertations

Advancements in integrated nanoelectronics will continue to require the use of unique materials or systems of materials with diverse functionalities in increasingly confined spaces.

Hence, research on finite-dimensional systems strive to unearth and expand the knowledge of fundamental physical properties in certain key materials which exhibit numerous concurrent and exploitable functions.

Correspondingly, ferroelectric nanostructures, which particularly display a plethora of complex phenomena, prevalent in countless fields of research, are noteworthy candidates. Presently, however, the assimilation of zero-(0D) and one-dimensional (1D) ferroelectric into micro- or nano-electronics has been lagging, in part due to a lack of applied and fundamental studies but …

Ferroelectric Batio3/Srtio3 Multilayered Thin Films For Room-Temperature Tunable Microwave Elements, Ming Liu, Chunrui Ma, Gregory Collins, Jian Liu, Chonglin Chen, Andy D. Alemayehu, Guru Subramanyam, Ying Ding, Jianghua Chen, Chao Dai, Yuan Lin, Melanie W. Cole

Electrical and Computer Engineering Faculty Publications

Ferroelectric BaTiO3/SrTiO3 with optimized c-axis-oriented multilayered thin films were epitaxially fabricated on (001) MgO substrates. The microstructural studies indicate that the in-plane interface relationships between the films as well as the substrate are determined to be (001)SrTiO3//(001)BaTiO3//(001)MgO and [100]SrTiO3//[100]BaTiO3//[100]MgO. The microwave (5 to 18 GHz) dielectric measurements reveal that the multilayered thin films have excellent dielectric properties with large dielectric constant, low dielectric loss, and high dielectric tunability, which suggests that the as-grown ferroelectric multilayered thin films can be developed for room-temperature tunable microwave elements and related device applications.

Intermediate Band Solar Cells Based On Inas Quantum Dots Embedded In Ingaas Quantum Well, Ramesh Vasan

Graduate Theses and Dissertations

Intermediate band solar cells based on quantum dots and quantum wells with anti-reflection coating are investigated in this thesis. The demand for high efficient solar cells as an alternate source of energy is the main motivation for this research project. Intermediate band solar cells based on quantum dots were the subject of intensive research in recent years. High power conversion efficiency was predicted from InAs/GaAs intermediate band solar cells as the presence of InAs quantum dots increased the absorption below the band gap of the host material.

In this thesis, an attempt has been made to further increase the absorption …

New Effects Of Aging And Lattice Intercalation On Surface Properties Of Titanate Nanobelts, Roger Williams

Graduate Theses and Dissertations

Titanate nanobelts (NBs) have structural characteristics beyond that of clays. Due to a negatively charged lattice matrix of edge-shared TiO6-octahedra, the location of intercalated cations within the interlayer space may dictate the charge-conductions. This environment may in turn govern the lattice-framework's stability and surface properties, based upon our preliminary

data.

On that basis, these nanomaterials have been found in our lab to possess superb biological compatibility that is closely related to the types of the intercalated cations. In addition, a prolonged agitation was proven to enable us to manipulate the titanate NBs' length. In a parallel study, a ripening was …

Iii-V Bismide Optoelectronic Devices, Dongsheng Fan

Graduate Theses and Dissertations

This dissertation explores modeling, molecular beam epitaxy growth, and fabrication of III-V bismide optoelectronic devices, which are of great importance in modern applications of telecommunication, gas sensing, environment monitoring, etc. In the current room-temperature continuous-wave operational GaSb-based type-I InGaAsSb/AlGaInAsSb quantum well laser diodes in 3-4 um mid-wavelength range, the lasing wavelength and performance of the devices are limited due to the lack of hole confinement in the active regions. In this dissertation, a novel GaSb-based GaInAsSbBi material is proposed to replace the conventional InGaAsSb material in the quantum well region, which enables the laser diodes achieve up to 4 µm …

Synthesis Of Optimized Inp/Zns Core/Shell Nanocrystals And Tio2 Nanotubes For Quantum Dot Sensitized Solar Cells, Seungyong Lee

Graduate Theses and Dissertations

Synthesis of InP/ZnS core/shell nanocrystals and TiO₂ nanotubes and the optimization study to couple them together were explored for quantum dot sensitized solar cells. Its intrinsic nontoxicity makes the direct band gap InP/ZnS core/shell be one of the most promising semiconductor nanocrystals for optoelectric applications, with the advantage of tuning the optical absorption range in the desired solar spectrum region. Highly luminescent and monodisperse InP/ZnS nanocrystals were synthesized in a non-coordinating solvent. By varying the synthesis scheme, different size InP/ZnS nanocrystals with emission peaks ranging from 520 nm to 620 nm were grown. For the purpose of ensuring air …

Brust-Schiffrin Synthesis Of Catalytic Bipodal Pdpt Nanoparticles With Some Mechanistic Insights, Sangbum Han, Vara P. Sheela, Wei Cao, Balasubramanian Ramjee

Applied Research Center Publications

Brust–Schiffrin reduction of Pd and Pt precursors in the presence of resorcinarene amine surfactant led to the formation of substantially Pt rich, PdPt bimetallic nanoparticles of a V-shape or variants on the V-shape. New insights into this reaction are provided on the basis of reversed Brust–Schiffrin syntheses, DLS, UV-vis, and NMR analysis. Based on our experiments we conclude that the resorcinarene amine surfactant is part of the inverse micelle formed from TOABr and it also selectively complexes with the Pd salts prior to their reduction. Remarkably, the composition of the bipodal nanoparticles could be varied substantially by varying the reaction …

Investigation Of Cds Nanowires And Planar Films For Enhanced Performance As Window Layers In Cds-Cdte Solar Cell Devices, Jianhao Chen

Theses and Dissertations--Electrical and Computer Engineering

Cadmium sulfide (CdS) and cadmium telluride (CdTe) are two leading semiconductor materials used in the fabrication of thin film solar cells of relatively high power conversion efficiency and low manufacturing cost. In this work, CdS/CdTe solar cells with a varying set of processing parameters and device designs were fabricated and characterized for comparative evaluation. Studies were undertaken to elucidate the effects of (i) each step in fabrication and (ii) parameters like thickness, sheet resistance, light absorptivity solution concentration, inert gas pressure etc. Best results were obtained when the thickness of CdS planar film for the window layer was in the …

Copper Indium Diselenide Nanowire Arrays In Alumina Membranes Deposited On Molybdenum And Other Back Contact Substrates, Bhavananda R. Nadimpally

Theses and Dissertations--Electrical and Computer Engineering

Heterojunctions of CuInSe₂ (CIS) nanowires with cadmium sulfide (CdS) were fabricated demonstrating for the first time, vertically aligned nanowires of CIS in the conventional Mo/CIS/CdS stack. These devices were studied for their material and electrical characteristics to provide a better understanding of the transport phenomena governing the operation of heterojunctions involving CIS nanowires. Removal of several key bottlenecks was crucial in achieving this. For example, it was found that to fabricate alumina membranes on molybdenum substrates, a thin interlayer of tungsten had to be inserted. A qualitative model was proposed to explain the difficulty in fabricating anodized aluminum oxide …

Growth Of Silver Nanoparticles On Transparent Substrates From Liquid Precursors: Improvements And Applications, Carlos Andrés Jarro Sanabria

Theses and Dissertations--Electrical and Computer Engineering

Interest in controlling the synthesis of silver nanoparticles in colloidal solutions has increased during the last two decades. There is also growing interest in forming layers of silver nanoparticles on substrates, particularly for surface-enhanced Raman spectroscopy applications. However, methods to grow silver nanoparticles directly on substrates have not been studied extensively, and there are few techniques for controlling the size, shape, density, and location of the particles. This work presents a simple and reliable method to photodeposit silver nanoparticles onto transparent substrates. The size, shape and deposition density of the nanoparticles are influenced by the precursor solution, light intensity, and …

Multi-Mode Self-Referencing Surface Plasmon Resonance Sensors, Jing Guo

Theses and Dissertations--Electrical and Computer Engineering

Surface-plasmon-resonance (SPR) sensors are widely used in biological, chemical, medical, and environmental sensing. This dissertation describes the design and development of dual-mode, self-referencing SPR sensors supporting two surface-plasmon modes (long- and short-range) which can differentiate surface binding interactions from bulk index changes at a single sensing location. Dual-mode SPR sensors have been optimized for surface limit of detection (LOD). In a wavelength interrogated optical setup, both surface plasmons are simultaneously excited at the same location and incident angle but at different wavelengths. To improve the sensor performance, a new approach to dual-mode SPR sensing is presented that offers improved differentiation …

Silver (Ag) Nanoparticle Based Masks For The Development Of Antireflection Subwavelength Structures In Gaas And Si Solar Cells, Nazme A. Moushumy

Theses: Doctorates and Masters

This thesis focuses on the design and development of silver nanoparticles that can be used as masks for the development of antireflection subwavelength grating (SWG) structures. We particularly investigate the impact of silver thin film thickness and the effect of annealing temperature on the fabrication of silver nanoparticles of controlled size and spacing distributions. We also use these measured distributions to predict the performance of subwavelength grating structures developed using dry and isotropic etching of semiconductor substrates.

Silver (Ag) thin films of different thicknesses are deposited on Silicon (Si) and Gallium Arsenide (GaAs) semiconductor substrates and annealed at different temperatures. …