Nanotechnology Fabrication Commons^™

Nanofibrous Materials And Nanoparticles For Combating Antimicrobial Resistance: Synthesis, Integration, And Translational Perspectives, Rewati Raman Ujjwal, Ashish Dilip Sutar, Rahul Shukla, Gymama Slaughter

Center for Bioelectronics Publications

Antimicrobial resistance (AMR) is a major global health challenge driven by mechanisms such as biofilm formation, efflux pumps, and genetic mutations. Nanoparticulate and fibrous materials have emerged as promising strategies to overcome these limitations through multimodal antimicrobial action and controlled drug delivery. This review highlights recent advances in electrospun nanofibrous systems, including natural and synthetic polymer-based scaffolds, stimuli-responsive nanofibers, and functionalized patches. Nanoparticle-loaded nanofiber systems demonstrate enhanced performance, including bacterial eradication, sustained drug release, and significant biofilm disruption. Multifunctional systems combining antimicrobial, antioxidant, and immunomodulatory properties further show synergism. Emerging innovations, such as piezoelectric and smart sensing systems, enable self-powered …

Test Data: Raised Or Recessed? Finding The Optimal Gate Architecture For Improving The Static Performance Of Graphene Transistors, Ivan Puchades, Tzu-Jung Huang, Andrew Spencer, Luke Ingraham, Anibal Pacheco

Data

As silicon CMOS technology approaches its scaling limits, graphene offers a compelling alternative as the active material channel in transistors due to its high carrier mobility and atomically thin profile, which provide strong electrostatic control and promise high-performance analog applications. However, roadblocks such as device-to-device variation, high contact resistance, poor dielectric interfaces, and non-uniform graphene quality have limited the adoption of graphene field effect transistors (GFETs). Hence, further investigations are required for mitigating these issues at a material, e.g., by improving graphene transfer, and device level, e.g., by finding an appropriate gate architecture. In this work, we directly compare two …

Developing A Low-Temperature Pathway For The Synthesis Of Two-Dimensional Ws2 Nanosheets, Akhil Potdar

Holster Scholar Projects

Since their discovery in 2004, two-dimensional (2D) materials have attracted great attention due to their unique mechanical, electrical, and chemical properties. However, their integration into devices is limited by the high temperatures required for crystalline growth, which prevents the use of flexible and biocompatible substrates like polymers for biomedical and next-generation electronic devices. This project aims to therefore develop a low-temperature synthesis process for two-dimensional tungsten disulfide (WS₂), a material particularly promising due to its tunable bandgap and biocompatibility. We propose that by first depositing an intermediate tungsten oxide film (WOx) via Hollow Cathode Plasma-Assisted Atomic Layer Deposition (HCP-ALD) and …

Effect Of Activation Temperature On Quantum Efficiency And Lifetime Of Nea Truncated Nanocone Array Gaas Photocathode, Md. Aziz Arroyo Rahman, Md Abdullah Mamun, Shukui Zhang, Hani E. Elsayed-Ali

Physics Faculty Publications

This study investigates the quantum efficiency (QE) and operational lifetime of a negative electron affinity GaAs truncated nanocone array (TNCA) photocathode benchmarked against a conventional flat GaAs photocathode under varying activation temperatures. The TNCA structure demonstrated a QE of up to 13.6% at 590 nm with room temperature (RT) activation—approximately 1.5 times higher than its flat counterpart. This enhancement is due to Mie resonance effects within the nanostructure, as confirmed by finite-difference time-domain simulations. Moreover, the TNCA photocathode exhibits significantly extended charge lifetime, with enhancement factors of ∼6.1 and ∼19.8 under RT and 50 °C activations, respectively. These gains are …

Unveiling The Indoor Performance Of Perovskite/Silicon Tan‑Dem Solar Cells: A Comprehensive Exploration Through Numerically Modelled Energy Band Diagrams, Ziad Khalifa, Sameh O. Abdellatif, Alexander De-Bernardinis, Muath Alkadi, Mostafa Ganoud, Saif Qaid

Chemical Engineering

This paper delves into the indoor performance analysis of Perovskite/Silicon Tandem Solar Cells (PSSTC) through a detailed exploration utilizing numerically modeled energy band diagrams. The primary objective is to uncover the potential of PSSTC for solar energy conversion in indoor settings. Various tandem cell configurations are scrutinized under diverse artificial lighting spectra, with an innovative Li4Ti5O12/ CsPbCl3/MAPbBr3/CH3NH3PbI3/ Si architecture achieving an exceptional maximum power conversion efficiency of 25.25%. This represents a substantial efficiency enhancement of nearly 7% compared to standalone Silicon cells. The study underscores the significance of design optimization in maximizing performance. The energy band diagram analysis reveals a …

Optoelectronic And Morphological Surface Resistance Evaluation Of Laser-Induced Graphene Counter Electrodes For Potential Applications In Cesium Lead Halide Perovskite Solar Cells, Ziad Khalifa, Sameh Osama Abdellatif, Rami Ghannam

Chemical Engineering

This study investigates the physicochemical, optical, and electrical characterization of laser-induced graphene (LIG) samples for integration as counter electrodes in cesium lead halide perovskite solar cells. The impact of laser processing parameters on electrode performance is explored, including laser power, laser speed, and beam defocus. Density functional theory (DFT) computational modeling is employed for atomistic investigation and work function estimation, demonstrating the density of states (DOS), quantum capacitance of the graphene sheets, and energy work function. NiO is utilized as a hole transport layer, and the energy work function of LIG is tuned accordingly. SEM measurements estimate thin film porosity, …

Exploring The Morphological Surface Resistance And Optical Absorption Of Thin Black Carbon Nanotube Films For Electronic And Optoelectronic Devices, Ziad Khalifa, Sameh Osama Abdellatif

Chemical Engineering

This study investigates the optical and electrical properties of thin black films of carbon nanotubes (CNTs) fabricated under various conditions to explore their potential integration as either a perfect broadband absorber or enhanced counter electrode. The study involves SEM measurements, surface resistance measurements, and UV–Vis. spectrometer analysis. The results show that the CNT thin films exhibit high electrical conductivity and strong light absorption across various wavelengths. Optically, we investigated the impact of varying the growth temperature and catalyst temperature on the absorption profile of the thin films. The fabricated and deposited CNTs showed broadband absorption spectra, reaching 92.8% of the …

Amorphous Boron Carbide-Amorphous Silicon Heterojunction Devices, Vojislav Medic

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

This dissertation will show successful development and characterization of amorphous boron carbide-amorphous silicon heterojunction device with potential for neutron detection. The amorphous hydrogenated boron carbide (a-BC:H) has been extensively researched as a semiconductor for neutron voltaic device fabrication. Naturally occurring boron contains 19.8% of boron isotope B¹⁰ that has a high absorption cross section of thermal neutrons at lower energies, and boron carbide contains 14.7% of that B¹⁰ isotope. Therefore, as a semiconductor compound of boron a-BC:H has the ability to absorb radiation, generate charge carriers, and collect those carriers. Previous work on a-BC:H devices investigated the fabrication …

Impact Of Silicon Ion Irradiation On Aluminum Nitride-Transduced Microelectromechanical Resonators, David D. Lynes, Joshua Young, Eric Lang, Hengky Chandrahalim

Faculty Publications

Microelectromechanical systems (MEMS) resonators use is widespread, from electronic filters and oscillators to physical sensors such as accelerometers and gyroscopes. These devices' ubiquity, small size, and low power consumption make them ideal for use in systems such as CubeSats, micro aerial vehicles, autonomous underwater vehicles, and micro-robots operating in radiation environments. Radiation's interaction with materials manifests as atomic displacement and ionization, resulting in mechanical and electronic property changes, photocurrents, and charge buildup. This study examines silicon (Si) ion irradiation's interaction with piezoelectrically transduced MEMS resonators. Furthermore, the effect of adding a dielectric silicon oxide (SiO₂) thin film is …

Origin Of Capacitance In Perovskite Solar Cells: Insight Vision On The Energy Band Diagram, Ziad Khalifa, Sameh Abdellatif, Monica Roman

Chemical Engineering

In recent years, perovskite solar cells (PSCs) have made significant progress, with fast improvements in energy conversion. Although they have become incredibly efficient in a short amount of time, they still face several obstacles before becoming a viable commercial technology. Researchers spent time looking for an equivalent circuit that could describe the J-V curves of PSCs and demonstrate the physical processes of optical absorption and carrier transit. In this paper, we proposed a model of perovskite solar cells (PSCs) using SCAPS software to determine the parasitic elements and show the solar cell's behavior. A previous model of a perovskite solar …

Implementing Commercial Inverse Design Tools For Compact, Phase-Encoded, Plasmonic Digital Logic Devices, Michael Efseaff, Kyle Wynne, Krishna Narayan, Mark C. Harrison

Engineering Faculty Articles and Research

Numerical simulations have become an essential design tool in the field of photonics, especially for nanophotonics. In particular, 3D finite-difference-time-domain (FDTD) simulations are popular for their powerful design capabilities. Increasingly, researchers are developing or using inverse design tools to improve device footprints and performance. These tools often make use of 3D FDTD simulations and the adjoint optimization method. We implement a commercial inverse design tool with these features for several plasmonic devices that push the boundaries of the tool. We design a logic gate with complex design requirements as well as a y-splitter and waveguide crossing. With minimal code changes, …

Application Of The Core Shell Model For Strengthening Polymer Filament Interfaces, Yu-Chung Lin, Aniket Raut, Yiwei Fang, Yifan Yin, David Sprouster, Tai-De Li, Guillaume Freychet, Mikhail Zhernenkov, Steve Nitodas, Jonathan Sokolov, Yuval Shmueli, Miriam Rafailovich

Advanced Science Research Center

While surface segregation has been intensively studied in thin films, relatively little has been investigated in filament geometries. In contrast to thin films, the filament surface forms a continuum, with interactions both at the free air and internal filament interface, which makes it difficult to achieve an equilibrium configuration. This asymmetry has become particularly apparent with the increasing use of additive manufacturing where entire structures are constructed via layered deposition of filamentous layers from a moving thermal nozzle. In addition, this process is highly non-equilibrated with poor thermal retention and is responsible for insufficient filament–filament interfacial fusion and internal pore …

Facile One-Step Hydrothermal Method For Nico2s4/Rgo Nanocomposite Synthesis For Efficient Hybrid Supercapacitor Electrodes, Ahmed Mysara, Sayed Y. Attia, Fouad I. El-Hosiny, M A. Sadek, Saad G. Mohamed, M M. Rashad

Nanotechnology Research Centre

Spinel nickel-cobalt sulfide (NiCo2S4) supported on reduced graphene oxide (rGO) was fabricated through a facile one-step hydrothermal method for energy storage applications. The distribution of the NiCo2S4 nanoparticles on the rGO surface was found to improve the supercapacitive performance of the assembled device. The NiCo2S4/rGO nanocomposite exhibits outstanding electrochemical behavior with a capacity (C)/specific capacitance (Cs) of 536 C g−1/1072 F g−1 at a current density of 1 A g−1. To further investigate the electrochemical behavior of the NiCo2S4/rGO nanocomposite, a hybrid supercapacitor (HSC) was constructed utilizing a NiCo2S4/rGO positive electrode and an activated carbon …

Investigating The Variation In The Optical Properties Of Tio2 Thin-Film Utilized In Bifacial Solar Cells Using Machine Learning Algorithm, Ziad Khalifa, Sameh Abdellatif, Ahmed Fathi, Kareem Abdullah, Minatallah Hassan

Chemical Engineering

Among various solar cell architectures, dye-sensitized solar cells (DSSCs) and perovskite solar cells have demonstrated the capability of being bifacial as both can be fabricated on conducting glass electrodes. In both cells, TiO2 plays a key role in the optoelectronic properties of the cell. Various studies have reported a range of recipes and deposition techniques for TiO2 thin films. Such variety introduces some uncertainties into the optical properties of the prepared films as well as in the process repeatability. Here, we utilized machine learning methods to correlate the film porosity to the film refractive index, making it capable of studying …

Grand Challenges In Low Temperature Plasmas, Xinpei Lu, Peter J. Bruggeman, Stephan Reuter, George Naidis, Annemie Bogaerts, Mounir Laroussi, Michael Keidar, Eric Robert, Jean-Michel Pouvesle, Dawei Liu, Kostya (Ken) Ostrikov

Electrical & Computer Engineering Faculty Publications

Low temperature plasmas (LTPs) enable to create a highly reactive environment at near ambient temperatures due to the energetic electrons with typical kinetic energies in the range of 1 to 10 eV (1 eV = 11600K), which are being used in applications ranging from plasma etching of electronic chips and additive manufacturing to plasma-assisted combustion. LTPs are at the core of many advanced technologies. Without LTPs, many of the conveniences of modern society would simply not exist. New applications of LTPs are continuously being proposed. Researchers are facing many grand challenges before these new applications can be translated to practice. …

Fabricating Nanophotonic Devices Using Nanofabrication Techniques, Scott Cummings

Student Scholar Symposium Abstracts and Posters

Nanofabrication processes are widely used to make the integrated circuits and computer chips that are ubiquitous in today’s technology. These fabrication processes can also be applied to the creation of nanophotonic devices. The ways in which we apply these fabrication techniques in the field of photonics is often constrained by the technologies used for electronics manufacturing which presents an interesting engineering challenge. These limitations include availability and cost of certain fabrication equipment and techniques required to create state-of-the-art nanophotonic devices. Through work with the University of California Irvine nano-fabrication cleanroom, we designed and fabricated various integrated photonic components including grating …

Tailoring Plasmon Excitations In Alpha − T 3 Armchair Nanoribbons, Andrii Iurov, Liubov Zhemchuzhna, Godfrey Gumbs, Danhong Huang, Paula Fekete, Farhana Anwar, Dipendra Dahal, Nicholas Weekes

Publications and Research

We have calculated and investigated the electronic states, dynamical polarization function and the plasmon excitations for α − T ₃ nanoribbons with armchair-edge termination. The obtained plasmon dispersions are found to depend significantly on the number of atomic rows across the ribbon and the energy gap which is also determined by the nanoribbon geometry. The bandgap appears to have the strongest effect on both the plasmon dispersions and their Landau damping. We have determined the conditions when relative hopping parameter α of an α − T ₃ lattice has a strong effect on the plasmons which makes our material distinguished …

Recent Advances In Silver Nanoparticle-Based Electrochemical Sensors For Determining Organic Pollutants In Water, Ziad Khalifa, Moustafa Zahran, Magdy Zahran, Magdi Abdelazzem

Chemical Engineering

Water pollutants have attracted great attention because of their negative effect on human health. Accordingly, various analytical techniques have been investigated to detect water pollutants as a preliminary step for their control. This review highlights silver nanoparticles (AgNPs) as promising electrochemical probes studied for detecting organic pollutants. Electrochemical sensors can be fabricated by modifying electrode surfaces using AgNPs via different techniques, such as electrochemical deposition, drop casting, spin coating, sticking, and transfer sticking, as well as carbon paste-based modification. AgNPs at electrode surfaces can be identified by their stripping to form Ag+ with a particular oxidation peak. Additionally, they can …

The Effects Of The Transient And Performance Loss Rates On Pv Output Performance, Chibuisi Chinasaokwu Okorieimoh, Brian Norton, Michael Conlon

Conference papers

Solar photovoltaic (PV) panels experience long-term performance degradation as compared to their initial performance, resulting in lower like-per-like efficiencies and performance ratios. Manufacturers of solar photovoltaic modules normally guarantee a lifespan of more than 20 years. To meet such commitments, it is important to monitor and mitigate PV module degradation during this period, as well as beyond, to recognize maintenance and repair needs. Solar PV modules degrade over time, becoming less effective, less reliable, and eventually unusable. The effects of transient and performance loss rates on the output performance of polycrystalline silicon (p-Si) solar PV modules are the focus of …

Inventions Of Scientists, Engineers And Specialists From Different Countries In The Area Of Nanotechnologies. Part V, Leonid A. Ivanov, Li D. Xu, Konstantin E. Razumeev, Valentina M. Feoktistova, Petr S. Prokopiev

Information Technology & Decision Sciences Faculty Publications

Introduction. Advanced technologies impress people's imagination demonstrating the latest achievements (materials, methods, systems, technologies, devices etc.) that dramatically change the world. This, first of all, concerns nanotechnological inventions designed by scientists, engineers and specialists from different countries. Main part. The article provides an abstract overview of inventions of scientists, engineers and specialists from different countries: Russia, USA, China, Belarus, Italy. The results of the creative activity of scientists, engineers and specialists, including inventions in the field of nanotechnology and nanomaterials allow, when introduced to industry, achieving a significant effect in construction, housing and communal services, and related sectors of the …

Nonlinear Nanophotonic Devices In The Ultraviolet To Visible Wavelength Range, Jinghan He, Hong Chen, Jin Hu, Jingan Zhou, Yingmu Zhang, Andre Kovach, Constantine Sideris, Mark C. Harrison, Yuji Zhao, Andrea M. Armani

Engineering Faculty Articles and Research

Although the first lasers invented operated in the visible, the first on-chip devices were optimized for near-infrared (IR) performance driven by demand in telecommunications. However, as the applications of integrated photonics has broadened, the wavelength demand has as well, and we are now returning to the visible (Vis) and pushing into the ultraviolet (UV). This shift has required innovations in device design and in materials as well as leveraging nonlinear behavior to reach these wavelengths. This review discusses the key nonlinear phenomena that can be used as well as presents several emerging material systems and devices that have reached the …

Pool Boiling Inversion On Femtosecond Laser Surface Processed 304 Stainless Steel And Its Impact On Steady-State Time Constants, Justin Costa-Greger, Alfred Tsubaki, Josh Gerdes, Mark Anderson, Craig Zuhlke, Dennis Alexander, Jeff Shield, George Gogos

UCARE: Research Products

FLSP surfaces resulting in boiling inversion require longer times to reach steady-state once inversion has occurred Boiling inversion has been shown to be the result of changing nucleation dynamics in which a large number of nucleation sites activate Increased time required to reach steady-state is linked to the rate at which these nucleation sites activate. Heat fluxes above the boiling inversion point can require up to an additional 3 hours to reach steady-state, compared to the typical 15-20 minutes reported in the literature

Evaluation Of Capacitive Deionization Desalination Technology For Irrigation, Ziad Khalifa, Moustafa Elshafei Prof, Abdalrahman Amer, Eng, Ashraf Seleym Dr, Tamer Samir Eng

Chemical Engineering

Desalination of brackish groundwater has great potential to alleviate the problem of the limited water resources in Egypt. In this paper, we studied the desalination of brackish water for irrigation purposes using capacitive deionization (CDI) technology. We investigated a modular unit for use in greenhouses (GH). A GH for the production of tomato requires about 3.2 m3/d of water. The target CDI unit has a production capacity of 32 m3/d for irrigation of 10 greenhouses from brackish water. The paper provides an extensive simulation study to illustrate the influence of various design parameters and to unveil the CDI technology pros …

Smart Charging Of Future Electric Vehicles Using Roadway Infrastructure, Sara Ahmed, Ethan Ahn, Mahmoud Reda Taha, Samer Dessouky, Moneeb Genedy, Daniel Fernandez, Ann Sebestian, Patience Raby

Data

Corresponding data set for Tran-SET Project No. 18ITSTSA03. Abstract of the final report is stated below for reference:

"Inspired by the fact that there is an immense amount of renewable energy sources available on the roadways such as mechanical pressure and frictional heat, this study presented the development and implementation of an innovative charging technique for future electric vehicles (EVs) by fully utilizing the existing roadways and the state-of-the-art nanotechnology and power electronics. The project introduced a novel wireless charging system, SIC (Smart Illuminative Charging), that uses LEDs powered by piezoelectric nanomaterials as the energy transmitter source and thin film …

Silica-Coated Metallic Nanoparticle-Based Hierarchical Super-Hydrophobic Surfaces Fabricated By Spin-Coating And Inverse Nanotransfer Printing, Shengjie Zhai, Hui Zhao

Mechanical Engineering Faculty Research

By combining spin coating and inverse nanotransfer printing, silica-coated gold nanoparticles are patterned onto polydimethylsiloxane (PDMS) superhydrophobic surfaces to form a hierarchical structure. A layer of nanoparticles is spin-coated on a flat silicon substrate serving as the stamp, which is then transferred to the raised regions of PDMS surfaces. Our inverse nanotransfer printing is in contrast to the standard nanotransfer printing, which transfers metal from the raised regions of a stamp to a flat PDMS surface. The fabricated hierarchical surface exhibits a higher contact angle and delays the Cassie-Wenzel transition during evaporation of a sessile droplet, indicating an improvement of …

Tuning The Reactivity Of Nanoenergetic Gas Generators Based On Bismuth And Iodine Oxidizers, Mkhitar A. Hobosyan, Karen S. Martirosyan

Physics & Astronomy Faculty Publications

There is a growing interest on novel energetic materials called Nanoenergetic Gas- Generators (NGGs) which are potential alternatives to traditional energetic materials including pyrotechnics, propellants, primers and solid rocket fuels. NGGs are formulations that utilize metal powders as a fuel and oxides or hydroxides as oxidizers that can rapidly release large amount of heat and gaseous products to generate shock waves. The heat and pressure discharge, impact sensitivity, long term stability and other critical properties depend on the particle size and shape, as well as assembling procedure and intermixing degree between the components. The extremely high energy density and the …

Nano And Microsensors For Mammalian Cell Studies, Ioana Voiculescu, Masaya Toda, Naoki Inomata, Takahito Ono, Fang Li

Publications and Research

This review presents several sensors with dimensions at the nano- and micro-scale used for biological applications. Two types of cantilever beams employed as highly sensitive temperature sensors with biological applications will be presented. One type of cantilever beam is fabricated from composite materials and is operated in the deflection mode. In order to achieve the high sensitivity required for detection of heat generated by a single mammalian cell, the cantilever beam temperature sensor presented in this review was microprocessed with a length at the microscale and a thickness in the nanoscale dimension. The second type of cantilever beam presented in …

Advancing The Understanding Of Environmental Transformations, Bioavailability And Effects Of Nanomaterials, An International Us Environmental Protection Agency—Uk Environmental Nanoscience Initiative Joint Program, Mitch M. Lasat, Kian Fan Chung, Jamie Lead, Steve Mcgrath, Richard J. Owen, Sophie Rocks, Jason M. Unrine, Junfeng Zhang

Plant and Soil Sciences Faculty Publications

Nanotechnology has significant economic, health, and environmental benefits, including renewable energy and innovative environmental solutions. Manufactured nanoparticles have been incorporated into new materials and products because of their novel or enhanced properties. These very same properties also have prompted concerns about the potential environmental and human health hazard and risk posed by the manufactured nanomaterials. Appropriate risk management responses require the development of models capable of predicting the environmental and human health effects of the nanomaterials. Development of predictive models has been hampered by a lack of information concerning the environmental fate, behavior and effects of manufactured nanoparticles. The United …

Mechanical And Electrical Characterization Of Carbon Fiber/Bucky Paper/Zinc Oxide Hybrid Composites, Suma Ayyagari, Marwan Al-Haik, Virginie Rollin

Publications

The quest for multifunctional carbon fiber reinforced composites (CFRPs) expedited the use of several nano reinforcements such as zinc oxide nanorods (ZnO) and carbon nanotubes (CNTs). Zinc oxide is a semi-conductor with good piezoelectric and pyroelectric properties. These properties could be transmitted to CFRPs when a nanophase of ZnO is embedded within CFRPs. In lieu of ZnO nanorods, Bucky paper comprising mat of CNTs could be sandwiched in-between composite laminae to construct a functionally graded composite with enhanced electrical conductivities. In this study, different configurations of hybrid composites based on carbon fibers with different combinations of ZnO nanorods and Bucky …

Generalized Ellipsometry On Complex Nanostructures And Low-Symmetry Materials, Alyssa Mock

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

In this thesis, complex anisotropic materials are investigated and characterized by generalized ellipsometry. In recent years, anisotropic materials have gained considerable interest for novel applications in electronic and optoelectronic devices, mostly due to unique properties that originate from reduced crystal symmetry. Examples include white solid-state lighting devices which have become ubiquitous just recently, and the emergence of high-power, high-voltage electronic transistors and switches in all-electric vehicles. The incorporation of single crystalline material with low crystal symmetry into novel device structures requires reconsideration of existing optical characterization approaches. Here, the generalized ellipsometry concept is extended to include applications for materials with …