Nanotechnology Fabrication Commons^™

Nanostructured Cathode Catalysts For Aem Electrolysis: From Catalyst Design To Degradation And Hydrogen Dynamics, Yamini Kumaran

Electronic Theses & Dissertations (2024 - present)

Anion exchange membrane water electrolysis (AEMWE) presents a promising pathway toward cost-effective and sustainable hydrogen production by integrating the chemical robustness of alkaline systems with the compact, zero-gap design of proton exchange membrane electrolyzers. However, the widespread implementation of AEMWE is limited by the availability of highly active and durable platinum-group-metal (PGM)-free catalysts and by an incomplete understanding of their degradation behavior under realistic operating conditions.

This dissertation focuses on the development, characterization, and mechanistic investigation of nanostructured MoNi₄–MoO₂-based electrodes for efficient and stable hydrogen generation under alkaline and membrane-integrated environments. MoNi₄–MoO₂ nanorods …

Unveiling The Indoor Performance Of Perovskite/Silicon Tan‑Dem Solar Cells: A Comprehensive Exploration Through Numerically Modelled Energy Band Diagrams, Ziad Khalifa, Sameh O. Abdellatif, Alexander De-Bernardinis, Muath Alkadi, Mostafa Ganoud, Saif Qaid

Chemical Engineering

This paper delves into the indoor performance analysis of Perovskite/Silicon Tandem Solar Cells (PSSTC) through a detailed exploration utilizing numerically modeled energy band diagrams. The primary objective is to uncover the potential of PSSTC for solar energy conversion in indoor settings. Various tandem cell configurations are scrutinized under diverse artificial lighting spectra, with an innovative Li4Ti5O12/ CsPbCl3/MAPbBr3/CH3NH3PbI3/ Si architecture achieving an exceptional maximum power conversion efficiency of 25.25%. This represents a substantial efficiency enhancement of nearly 7% compared to standalone Silicon cells. The study underscores the significance of design optimization in maximizing performance. The energy band diagram analysis reveals a …

Optoelectronic And Morphological Surface Resistance Evaluation Of Laser-Induced Graphene Counter Electrodes For Potential Applications In Cesium Lead Halide Perovskite Solar Cells, Ziad Khalifa, Sameh Osama Abdellatif, Rami Ghannam

Chemical Engineering

This study investigates the physicochemical, optical, and electrical characterization of laser-induced graphene (LIG) samples for integration as counter electrodes in cesium lead halide perovskite solar cells. The impact of laser processing parameters on electrode performance is explored, including laser power, laser speed, and beam defocus. Density functional theory (DFT) computational modeling is employed for atomistic investigation and work function estimation, demonstrating the density of states (DOS), quantum capacitance of the graphene sheets, and energy work function. NiO is utilized as a hole transport layer, and the energy work function of LIG is tuned accordingly. SEM measurements estimate thin film porosity, …

Exploring The Morphological Surface Resistance And Optical Absorption Of Thin Black Carbon Nanotube Films For Electronic And Optoelectronic Devices, Ziad Khalifa, Sameh Osama Abdellatif

Chemical Engineering

This study investigates the optical and electrical properties of thin black films of carbon nanotubes (CNTs) fabricated under various conditions to explore their potential integration as either a perfect broadband absorber or enhanced counter electrode. The study involves SEM measurements, surface resistance measurements, and UV–Vis. spectrometer analysis. The results show that the CNT thin films exhibit high electrical conductivity and strong light absorption across various wavelengths. Optically, we investigated the impact of varying the growth temperature and catalyst temperature on the absorption profile of the thin films. The fabricated and deposited CNTs showed broadband absorption spectra, reaching 92.8% of the …

Schaeffler Icvd Coating Machine, Louis Mcgrath

Williams Honors College, Honors Research Projects

Chemical Vapor Deposition (CVD) is mutual technology used to deposit thin film through a gaseous phase by vaporizing the solid materials. This conventional process usually requires high thermal stability of the materials, which is not applicable for most of the polymeric materials. Therefore, a novel process, initiated Chemical Vapor Deposition (iCVD) is developed by introducing the gaseous monument and initiator to form the thin film in-situ. By adjusting the free-radical polymerization in the vapor phase, a variety of thin and uniform polymer films can be achieved. Depending on the chemistry, iCVD has many categories. This report explains the design …

Origin Of Capacitance In Perovskite Solar Cells: Insight Vision On The Energy Band Diagram, Ziad Khalifa, Sameh Abdellatif, Monica Roman

Chemical Engineering

In recent years, perovskite solar cells (PSCs) have made significant progress, with fast improvements in energy conversion. Although they have become incredibly efficient in a short amount of time, they still face several obstacles before becoming a viable commercial technology. Researchers spent time looking for an equivalent circuit that could describe the J-V curves of PSCs and demonstrate the physical processes of optical absorption and carrier transit. In this paper, we proposed a model of perovskite solar cells (PSCs) using SCAPS software to determine the parasitic elements and show the solar cell's behavior. A previous model of a perovskite solar …

Application Of The Core Shell Model For Strengthening Polymer Filament Interfaces, Yu-Chung Lin, Aniket Raut, Yiwei Fang, Yifan Yin, David Sprouster, Tai-De Li, Guillaume Freychet, Mikhail Zhernenkov, Steve Nitodas, Jonathan Sokolov, Yuval Shmueli, Miriam Rafailovich

Advanced Science Research Center

While surface segregation has been intensively studied in thin films, relatively little has been investigated in filament geometries. In contrast to thin films, the filament surface forms a continuum, with interactions both at the free air and internal filament interface, which makes it difficult to achieve an equilibrium configuration. This asymmetry has become particularly apparent with the increasing use of additive manufacturing where entire structures are constructed via layered deposition of filamentous layers from a moving thermal nozzle. In addition, this process is highly non-equilibrated with poor thermal retention and is responsible for insufficient filament–filament interfacial fusion and internal pore …

Ultraviolet Chiral Plasmonics, Tiago Ramos Leite Da Silva

LSU Doctoral Dissertations

The far- (λ < 250 nm) ultraviolet (UV) chiroptical response from protein secondary structures can aid in understanding protein interactions for drug discovery. Chiral metasurfaces have attracted attention to enhance the intrinsically weak biomolecular optical activity for improved structural biology characterization. However, due to materials and fabrication challenges, current metasurfaces mostly operate in the visible and near-infrared regimes with limited, if any, response in far-UV. The large spectral mismatch between metasurface and biomolecular resonances limits the chiral enhancement factor. In this work, we study aluminum planar metamaterials which display optical activity in the UV region. In the first part of this work, we experimentally and computationally investigate the resonant plasmonic-biomolecular interactions in the far-UV. To the best of our knowledge, our work is the first to experimentally explore these resonant interactions in the biologically relevant far-UV regime. We demonstrate experimentally and computationally enhanced chiral sensing of sub-10 nm amino acid films. We develop a full-wave computational model of a biomolecular film on an aluminum gammadion array using experimentally derived chiral parameters (κ) for L- and DTyrosine films. Our model shows that detectable enhancements in the circular dichroism (CD) and birefringence (CB) signals from small amounts of biomolecules are only possible when tight spectral overlap exists between the plasmonic and biomolecular chiroptical signals. We support this conclusion experimentally by fabricating aluminum gammadion arrays on fused silica substrates and sublimating ultrathin racemic, L- and D- Tyrosine films on the arrays. Complete Mueller matrix analysis of the resonant plasmonic-biomolecular system agrees with our computational results and demonstrates the importance of using far-UV active metasurfaces for enhancing natural optical activity. In the second part of this work, we study hybrid aluminum reflective metasurfaces, which leverage both local and propagating surface plasmons (PSP). These materials display strong bi-anisotropy with rich polarization conversion properties. We explore several geometries and verify how their symmetry properties affect their far-field response. Our observations provide an opportunity for researchers to improve the chiral response of plasmonic metasurfaces, especially in the challenging ultraviolet regime.

Investigating The Variation In The Optical Properties Of Tio2 Thin-Film Utilized In Bifacial Solar Cells Using Machine Learning Algorithm, Ziad Khalifa, Sameh Abdellatif, Ahmed Fathi, Kareem Abdullah, Minatallah Hassan

Chemical Engineering

Among various solar cell architectures, dye-sensitized solar cells (DSSCs) and perovskite solar cells have demonstrated the capability of being bifacial as both can be fabricated on conducting glass electrodes. In both cells, TiO2 plays a key role in the optoelectronic properties of the cell. Various studies have reported a range of recipes and deposition techniques for TiO2 thin films. Such variety introduces some uncertainties into the optical properties of the prepared films as well as in the process repeatability. Here, we utilized machine learning methods to correlate the film porosity to the film refractive index, making it capable of studying …

Recent Advances In Silver Nanoparticle-Based Electrochemical Sensors For Determining Organic Pollutants In Water, Ziad Khalifa, Moustafa Zahran, Magdy Zahran, Magdi Abdelazzem

Chemical Engineering

Water pollutants have attracted great attention because of their negative effect on human health. Accordingly, various analytical techniques have been investigated to detect water pollutants as a preliminary step for their control. This review highlights silver nanoparticles (AgNPs) as promising electrochemical probes studied for detecting organic pollutants. Electrochemical sensors can be fabricated by modifying electrode surfaces using AgNPs via different techniques, such as electrochemical deposition, drop casting, spin coating, sticking, and transfer sticking, as well as carbon paste-based modification. AgNPs at electrode surfaces can be identified by their stripping to form Ag+ with a particular oxidation peak. Additionally, they can …

Investigation Of Membrane Based Processes For Biomedical Applications, Efecan Pakkaner

Graduate Theses and Dissertations

As substantial developments were achieved in nanotechnology and polymer engineering, especially in the last few decades, the use of membranes and membrane-based procedures was found to be expanding into more and more research and development areas; including biological engineering, life sciences and biomedical engineering. Not only have they been the main focus of meaningful research, but they have also been the main pieces of the solutions to very thorny problems encountered within a wide range of applications from microfluidics to water treatment, thanks to their versatility, cost-effectiveness and biocompatibility, when compared to conventional separation techniques. To celebrate and embrace these …

Development Of Light Actuated Chemical Delivery Platform On A 2-D Array Of Micropore Structure, Hojjat Rostami Azmand, Hojjat Rostami Azmand

Dissertations and Theses

Localized chemical delivery plays an essential role in the fundamental information transfers within biological systems. Thus, the ability to mimic the natural chemical signal modulation would provide significant contributions to understand the functional signaling pathway of biological cells and develop new prosthetic devices for neurological disorders. In this paper, we demonstrate a light-controlled hydrogel platform that can be used for localized chemical delivery in a high spatial resolution. By utilizing the photothermal behavior of graphene-hydrogel composites confined within micron-sized fluidic channels, patterned light illumination creates the parallel and independent actuation of chemical release in a group of fluidic ports. The …

Perovskite Thin Films Annealed In Supercritical Fluids For Efficient Solar Cells, Gilbert Annohene

Theses and Dissertations

In the field of photovoltaics, scientists and researchers are working fervently to produce a combination of efficient, stable, low cost and scalable devices. Methylammonium lead trihalide perovskite has attracted intense interest due to its high photovoltaic performance, low cost, and ease of manufacture. Their high absorption coefficient, tunable bandgap, low-temperature processing, and abundant elemental constituent provide innumerable advantages over other thin film absorber materials. Since the perovskite film is the most important in the device, morphology, crystallization, compositional and interface engineering have been explored to boost its performance and stability. High temperatures necessary for crystallization of organic-inorganic hybrid perovskite films …

Evaluation Of Capacitive Deionization Desalination Technology For Irrigation, Ziad Khalifa, Moustafa Elshafei Prof, Abdalrahman Amer, Eng, Ashraf Seleym Dr, Tamer Samir Eng

Chemical Engineering

Desalination of brackish groundwater has great potential to alleviate the problem of the limited water resources in Egypt. In this paper, we studied the desalination of brackish water for irrigation purposes using capacitive deionization (CDI) technology. We investigated a modular unit for use in greenhouses (GH). A GH for the production of tomato requires about 3.2 m3/d of water. The target CDI unit has a production capacity of 32 m3/d for irrigation of 10 greenhouses from brackish water. The paper provides an extensive simulation study to illustrate the influence of various design parameters and to unveil the CDI technology pros …

Synthesis Of Graphene Using Plasma Etching And Atmospheric Pressure Annealing: Process And Sensor Development, Andrew Robert Graves

Graduate Theses, Dissertations, and Problem Reports (ETD)

Having been theorized in 1947, it was not until 2004 that graphene was first isolated. In the years since its isolation, graphene has been the subject of intense, world-wide study due to its incredibly diverse array of useful properties. Even though many billions of dollars have been spent on its development, graphene has yet to break out of the laboratory and penetrate mainstream industrial applications markets. This is because graphene faces a ‘grand challenge.’ Simply put, there is currently no method of manufacturing high-quality graphene on the industrial scale. This grand challenge looms particularly large for electronic applications where the …

Interfacial Contact With Noble Metal - Noble Metal And Noble Metal - 2d Semiconductor Nanostructures Enhance Optical Activity, Ricardo Raphael Lopez Romo

Graduate Theses and Dissertations

Noble metal nanoparticles and two-dimensional (2D) transition metal dichalcogenide (TMD) crystals offer unique optical and electronic properties that include strong exciton binding, spin-orbital coupling, and localized surface plasmon resonance. Controlling these properties at high spatiotemporal resolution can support emerging optoelectronic coupling and enhanced optical features. Excitation dynamics of these optical properties on physicochemically bonded mono- and few-layer TMD crystals with metal nanocrystals and two overlapping spherical metal nanocrystals were examined by concurrently (i) DDA simulations and (ii) far-field optical transmission UV-vis spectroscopic measurements. Initially, a novel and scalable method to unsettle van der Waals bonds in bulk TMDs to prepare …

Investigation Of The Electrode Polarization Effect For Biosensor Applications, Anil Koklu

Mechanical Engineering Research Theses and Dissertations

My research focuses on electrokinetic transport. Particularly, in this dissertation, we focus on fabrication and testing of micro electrodes with nanostructured surfaces to minimize the electrode polarization (EP) effects for biosensor applications. In the first study, electrochemical deposition of gold nanoparticles on to planar gold electrodes was used to generate rough surfaces. Dendritic nanostructures that reduced EP up to two orders of magnitude was obtained by optimizing the deposition conditions. These structures also enhanced dielectrophoresis (DEP) response of our bio-chips, making them usable in physiological buffers. In further studies we discovered a universal scaling of EP in the frequency domain, …

Symmetry And Dopant Diffusion In Inverted Nanopyramid Arrays For Thin Crystalline Silicon Solar Cells, Seok Jun Han

Chemical and Biological Engineering ETDs

In this dissertation, we enhance the efficiency of thin flexible monocrystalline silicon solar cells by breaking symmetry in light trapping nanostructures and improving homogeneity in dopant concentration profile. These thin cells are potentially less expensive than conventional thick silicon cells by using less silicon material and making the cells more convenient to be handled when supported on polymer films. Moreover, these cells are widely applicable due to their flexibility and lightweight. However, for high efficiencies, these cells require effective light trapping and charge collection. We achieve these in cells based on 14-mm-thick free-standing silicon films with light-trapping arrays of nanopyramidal …

Fabrication And Characterization Of Nanofiber Nylon-6-Mwcnt As An Electrochemical Sensor For Sodium Ions Concentration Detection In Sweat, Kelsey Mills

Williams Honors College, Honors Research Projects

Fabrication and characterization nylon-6-MWCNT nanofiber as an electrochemical sensor to detect sodium ion concentrations specifically in sweat. Using contact angle to determine surface morphology and chronoamperometry testing to identify ideal sensor conditions, tests optimized parameters like weight percent of nylon or other polymers, carbon nanotube (CNT) isomer, and solution concentration to determine reproducibility of functional sensors. Utilizing the electric qualities of carbon nanotubes partnered with the sodium ion selectivity of calixarene treatment and polymers unique properties like flexibility and scalability create open an arena for optimizing sodium ion sensors for further development for functional prototypes. Morphology tests showed that the …

Carbon Removal And Optoelectronic Property Tuning In Copper Arsenic Sulfide Thin Films Through Ligand Exchange And Alloying, Louis R. Schroeder, Scott Mcclary, Rakesh Agrawal

The Summer Undergraduate Research Fellowship (SURF) Symposium

Solution processed thin film solar cells are attractive alternatives to conventional energy sources due to low waste generation, flexibility in substrate choice, and scalability. The novel semiconductor Cu3AsS4 in the enargite phase has a near ideal band gap of 1.4 eV and has earth abundant constituent elements; yet single-junction solar cells have yielded low efficiencies due to a secondary carbonaceous phase present, among other issues. This carbonaceous phase may be eliminated by exchanging the carbonaceous ligands with molecular metal chalcogenides. To characterize the ligand exchanged particles, UV-Vis-NIR spectroscopy, Raman spectroscopy, X-ray diffraction, scanning electron microscopy, energy dispersive X-ray spectroscopy, and …

Nanostructured Morphologies In Glassy Polymer Networks, Brian Greenhoe

Dissertations

The body of this work describes a novel approach for the dispersion of multi-walled carbon nanotubes in a high T_g epoxy prepolymer matrix using a twin screw high-shear continuous reactor. The method demonstrated improves on previous dispersion methods in several ways. It offers increased efficiency through excellent heat transfer, while being solvent-less, scale-able, and tailorable to drive dispersion states to judiciously chosen dispersion states. Furthermore, it was shown that dispersion state and agglomerate morphology can be directed, in several ways, through processing conditions and also by controlling the matrix viscosity profile through cure. Broadband dielectric spectroscopy, optical hot-stage microscopy, …

Swelling-Etching Characterization Of Copper (I) Oxide - Pdms For The Development Of Micro/Nano - Particles Composite Mems Corrosion Sensor, Abdoul Kader Maiga

Graduate Theses and Dissertations

The primary objective for this thesis is to contribute to the understanding of the oxide removal process for a corrosion sensing device. The goal for designing such a device is for monitoring corrosion on metallic structures. The sensing material (6.35mm x 1mm discs) of the device is composed of copper (I) oxide particles mixed in some polydimethylsiloxane (PDMS). The PDMS, “housing,” is meant for controlling the oxidation rate through the sensing material. A solvent was used to facilitate the etchant diffusion through the PDMS matrix. Toluene and acetic acid were the ideal solvent and etchant, respectively, for carrying out the …

Functionalized Membranes For Environmental Remediation And Selective Separation, Li Xiao

Theses and Dissertations--Chemical and Materials Engineering

Membrane process including microfiltration (MF), ultrafiltration (UF), nanofiltration (NF) and reverse osmosis (RO) have provided numerous successful applications ranging from drinking water purification, wastewater treatment, to material recovery. The addition of functional moiety in the membranes pores allows such membranes to be used in challenging areas including tunable separations, toxic metal capture, and catalysis. In this work, polyvinylidene fluoride (PVDF) MF membrane was functionalized with temperature responsive (poly(N-isopropylacrylamide), PNIPAAm) and pH responsive (polyacrylic acid, PAA) polymers. It’s revealed that the permeation of various molecules (water, salt and dextran) through the membrane can be thermally or pH controlled. The introduction of …

Nanoparticle Necklace Network Arrays Exhibiting Room Temperature Single-Electron Switching, Jennifer L. Kane

Department of Chemical and Biomolecular Engineering: Dissertations, Theses, and Student Research

A single nanoparticle is one of the most sensitive electronic devices for sensing chemicals in a gas or liquid. The conductivity of a single Au nanoparticle is significantly modulated by the binding of a molecule that alters charge by just one electron. However, the single-electron sensitivity requires cryogenic temperatures and interconnection is not easy. A patterned two-dimensional network of one-dimensional nanoparticle necklaces made up of 10 nm Au particles are fabricated and shown to exhibit similar single-electron effect at room temperature. Furthermore, the long range conductivity of over 10’s of microns makes the structure easy to self-assemble onto conventional microelectronics …

High-Throughput Screening Of Shape Memory Alloy Thin-Film Spreads Using Nanoindentation, Arpit Dwivedi, Thomas J. Wyrobek, Oden L. Warren, Jason R. Hattrick-Simpers, Olubenga O. Famodu, Ichiro Takeuchi

Faculty Publications

We have demonstrated the utility of nanoindentation as a rapid characterization tool for mapping shape memoryalloy compositions in combinatorial thin-film libraries. Nanoindentation was performed on Ni–Mn–Al ternary composition spreads. The indentation hardness and the reduced elastic modulus were mapped across a large fraction of the ternary phase diagram. The large shape memoryalloy composition region, located around the Heusler composition (Ni₂MnAl), was found to display significant departure in these mechanical properties from the rest of the composition spread. In particular, the modulus and the hardness values are lower for the martensite region than those of the rest of the …

Desulfovibrio Desulfuricans G20 Tetraheme Cytochrome Structure At 1.5 A˚ And Cytochrome Interaction With Metal Complexes, Mrunalini Pattarkine, J J. Tanner, C A. Bottoms, Y H. Lee, Judy D. Wall

Faculty Works

The structure of the type I tetraheme cytochrome c3 from Desulfovibrio desulfuricans G20 was determined to 1.5 A˚ by X-ray crystallography. In addition to the oxidized form, the structure of the molybdate-bound form of the protein was determined from oxidized crystals soaked in sodium molybdate. Only small structural shifts were obtained with metal binding, consistent with the remarkable structural stability of this protein. In vitro experiments with pure cytochrome showed that molybdate could oxidize the reduced cytochrome, although not as rapidly as U(VI) present as uranyl acetate. Alterations in the overall conformation and thermostability of the metal-oxidized protein were investigated …

Studies On The Formation Of Dna-Cationic Lipid Composite Films And Dna Hybridization In The Composites, Murali Sastry, Vidya Ramakrishnan, Mrunalini Pattarkine, Krishna N. Ganesh

Faculty Works

The formation of composite films of double-stranded DNA and cationic lipid molecules (octadecylamine, ODA) and the hybridization of complementary single-stranded DNA molecules in such composite films are demonstrated. The immobilization of DNA is accomplished by simple immersion of a thermally evaporated ODA film in the DNA solution at close to physiological pH. The entrapment of the DNA molecules in the cationic lipid film is dominated by attractive electrostatic interaction between the negatively charged phosphate backbone of the DNA molecules and the protonated amine molecules in the thermally evaporated film and has been quantified using quartz crystal microgravimetry (QCM). Fluorescence studies …

Cationic Surfactant Mediated Hybridization And Hydrophobization Of Dna Molecules At The Liquid/Liquid Interface And Their Phase Transfer, Murali Sastry, Ashavani Kumar, Mrunalini Pattarkine, Vidya Ramakrishnan, Krishna N. Ganesh

Faculty Works

Hybridization of complementary oligonucleotides mediated by a cationic surfactant at the water/hexane interface leads to hydrophobic, double-helical DNA which may be readily phase transferred to the organic phase and cast into thin films on solid substrates.

Hybridization Of Dna By Sequential Immobilization Of Oligonucleotides At The Air-Water Interface, Murali Sastry, Vidya Ramakrishnan, Mrunalini Pattarkine, Anand Gole, K. N. Ganesh

Faculty Works

The hybridization of DNA by sequential electrostatic and hydrogen-bonding immobilization of single-stranded complementary oligonucleotides at the air-water interface with cationic Langmuir monolayers is demonstrated. The complexation of the single-stranded DNA molecules with octadecylamine (ODA) Langmuir monolayers was followed in time by monitoring the pressure-area isotherms. A large (and slow) expansion of the ODA monolayer was observed during each stage of complexation in the following sequence: primary single-stranded DNA followed by complementary single-stranded DNA followed by the intercalator, ethidium bromide. Langmuir-Blodgett (LB) films of the ODA-DNA complex were formed on different substrates and characterized using quartz-crystal microgravimetry (QCM), Fourier transform infrared …

Anion Induced Blue To Purple Transition In Bacteriorhodopsin, Mrunalini Pattarkine, Anil K. Singh

Faculty Works

Purple membrane (PM, λ" role="presentation">λmax" role="presentation">max 570 nm) of H. halobium on treatment with sulphuric acid changes its colour to blue (λ" role="presentation">λmax" role="presentation">max 608 nm). The purple chromophore can be regenerated from the blue chromophore by exogeneous addition of anions such as CI−" role="presentation">− and HPO42−" role="presentation">2−4. Chloride ion is found to be more effective than the dibasic phosphate ion in regenerating the purple chromophore. Nevertheless, one thing common to the anion regeneration is that both CI−" role="presentation">− and HPO42−" role="presentation">2−4 show marked pH effect. At pH 1.0 the efficiency of …