Electromagnetics and Photonics Commons^™

Gratings In Optical Waveguides And Lasers, Weida Zhang

Electrical Engineering Theses and Dissertations

Gratings play a crucial role in Distributed Bragg reflector (DBR) lasers, influencing their performance and characteristics. The focus of this work is aimed at the design of DBR lasers that significantly impact the laser's spectral and temporal behavior, making it a key component in optimizing DBR laser functionality.

The SMU developed grating software, compared with commercially available photonics software, has improved accuracy and much smaller computation times. The improved accuracy and reduced computation times compared with commercial photonics software occur because commercial software is typically based on numerical methods such as finite-difference time-domain (FDTD), eigenmode expansion and beam propagation methods …

Semiconductor Mode-Locked Lasers For Applications In Multi-Photon Imaging And Microwave Photonics, Srinivas Varma Pericherla

Graduate Thesis and Dissertation 2023-2024

Semiconductor lasers are considered essential for the advancement in the field of photonics where compact and energy-efficient lasers are necessary. Advancements in integrated photonic technologies will help push the performance of semiconductor lasers in the coming years and expand the technology to several other applications. Semiconductor lasers offer several key features such as high energy efficiency, mass production, availability at a myriad of wavelengths, and high integration capabilities. However, limitations in noise performance, pulse energy, and duration hold back semiconductor lasers from being utilized to their full potential. This dissertation reviews the utilization and development of external techniques that enable …

Injection Locking Of Semiconductor Mode-Locked Lasers For Long-Term Stability Of Widely Tunable Frequency Combs, Charles Williams

Electronic Theses and Dissertations

Harmonically mode-locked semiconductor lasers with external ring cavities offer high repetition rate pulse trains while maintaining low optical linewidth via long cavity storage times. Single frequency injection locking generates widely-spaced and tunable frequency combs from these harmonically mode-locked lasers, while stabilizing the optical frequencies. The output is stabilized long-term with the help of a feedback loop utilizing either a novel technique based on Pound-Drever-Hall stabilization or by polarization spectroscopy. Error signals of both techniques are simulated and compared to experimentally obtained signals. Frequency combs spaced by 2.5 GHz and ~10 GHz are generated, with demonstrated optical sidemode suppression of unwanted …

Improvements To Optical Communication Capabilities Achieved Through The Optical Injection Of Semiconductor Lasers, Timothy P. Locke

Theses and Dissertations

Optically injection locked lasers have shown significant improvement in the modulation capabilities of directly modulated lasers. This research creates a direct-modulated optical communications system to investigate the bit-rate distance improvements achievable using optically injected Fabry-Pérot laser diodes. The injection strength and detuning frequency of the injection signal was varied to determine their impact on the optical communication link's characteristics. This research measured a 25 fold increase in bit-rate distance product using optical injection locking as compared to the injected laser's free-running capability. A 57 fold increase was measured in the bit-rate distance product when signal power is considered in a …

Low Noise And Low Repetition Rate Semiconductor-Based Mode-Locked Lasers, Dimitrios Mandridis

Electronic Theses and Dissertations

The topic of this dissertation is the development of low repetition rate and low noise semiconductor-based laser sources with a focus on linearly chirped pulse laser sources. In the past decade chirped optical pulses have found a plethora of applications such as photonic analogto-digital conversion, optical coherence tomography, laser ranging, etc. This dissertation analyzes the aforementioned applications of linearly chirped pulses and their technical requirements, as well as the performance of previously demonstrated chirped pulse laser sources. Moreover, the focus is shifted to a specific application of the linearly chirped pulses, timestretched photonic analog-to-digital conversion (TS ADC). The challenges of …

New Laser Technologies Analysis Of Quantum Dot And Lithographic Laser Diodes, Abdullah Demir

Electronic Theses and Dissertations

The first part of this dissertation presents a comprehensive study of quantum dot (QD) lasers threshold characteristics. The threshold temperature dependence of a QD laser diode is studied in different limits of p-doping, hole level spacing and inhomogeneous broadening. Theoretical analysis shows that the threshold current of a QD laser in the limit of uniform QDs is not temperature independent and actually more temperature sensitive than the quantum well laser. The results also explain the experimental trends of negative characteristic temperature observed in QD lasers and clarify how the carrier distribution mechanisms inside and among the QDs affect the threshold …

Low Noise, High Repetition Rate Semiconductor-Based Mode-Locked Lasers For Signal Processing And Coherent Communications, Franklyn Quinlan

Electronic Theses and Dissertations

This dissertation details work on high repetition rate semiconductor mode-locked lasers. The qualities of stable pulse trains and stable optical frequency content are the focus of the work performed. First, applications of such lasers are reviewed with particular attention to applications only realizable with laser performance such as presented in this dissertation. Sources of timing jitter are also reviewed, as are techniques by which the timing jitter of a 10 GHz optical pulse train may be measured. Experimental results begin with an exploration of the consequences on the timing and amplitude jitter of the phase noise of an RF source …

Bipolar Cascade Vertical Cavity Surface Emitting Lasers For Rf Photonic Link Applications, William J. Siskaninetz

Theses and Dissertations

The development and demonstration of bipolar cascade vertical cavity surface emitting lasers is presented. The systematic approach to designing, fabricating, and characterizing the critical tunnel junction, incorporating the tunnel junction into an edge emitting bipolar cascade laser, and finally the transition to a VCSEL structure is detailed. A novel approach prior to growing and characterizing BC VCSELs was to investigate bipolar cascade light emitting diodes which incorporate the microcavity designs and disentangles the VCSEL cavity effects from the microcavity. The best performing p-doped oxide aperture microcavity design was then used as the microcavity for 1-, 2-, and 3-stage BC …

Integrated Wavelength Stabilization Of Broad Area Semiconductor Lasers Using A Dual Grating Reflector, Jason O'Daniel

Electronic Theses and Dissertations

A new fully integrated wavelength stabilization scheme based on grating-coupled surface-emitting lasers is explored. This wavelength stabilization scheme relies on two gratings. The first grating is fabricated on the p-side of the semiconductor laser in close proximity to the laser waveguide such that it couples light out of the guided mode of the waveguide into a propagating mode in the substrate; this grating is known as the grating coupler. The second grating is fabricated on the n-side of the substrate such that for the stabilization wavelength, this second grating operates in the Littrow condition and is known as the feedback …

Monolithic Integration Of Dual Optical Elements On High Power Semicond, Laurent Vaissie

Electronic Theses and Dissertations

This dissertation investigates the monolithic integration of dual optical elements on high power semiconductor lasers for emission around 980nm wavelength. In the proposed configuration, light is coupled out of the AlGaAs/GaAs waveguide by a low reflectivity grating coupler towards the substrate where a second monolithic optical element is integrated to improve the device performance or functionality. A fabrication process based on electron beam lithography and plasma etching was developed to control the grating coupler duty cycle and shape. The near-field intensity profile outcoupled by the grating is modeled using a combination of finite-difference time domain (FDTD) analysis of the nonuniform …

Dispersion-Managed Breathing-Mode Semiconductor Mode-Locked Ring Laser, Bojan Resan

Electronic Theses and Dissertations

A novel dispersion-managed breathing-mode semiconductor mode-locked ring laser is developed. The "breathing-mode" designation derives from the fact that intracavity pulses are alternately stretched and compressed as they circulate around the ring resonator. The pulses are stretched before entering the semiconductor gain medium to minimize the detrimental strong integrating self-phase modulation and to enable efficient pulse amplification. Subsequently compressed pulses facilitate bleaching the semiconductor saturable absorber. The intracavity pulse compression ratio is higher than 50. Down chirping when compared to up chirping allows broader mode-locked spectra and shorter pulse generation owing to temporal and spectral semiconductor gain dynamics. Pulses as short …

Optical And Etching Studies Of Native Aluminum Oxide Layers For Use In Microcavity Photonic Devices, William L. Bernhard

Theses and Dissertations

Optical communication and computing systems are required to meet future information transfer and processing needs. Microcavity devices serve as an enabling technology to implement and integrate optoelectronic systems. It is important to understand the optical and mechanical properties of materials utilize within microcavity devices. Only then is it possible to accurately model and analyze structures. Microcavity structures incorporating a high aluminum content AlGaAs layers are designed, grown, processed, and measured. The processing of these devices includes the conversion of high aluminum-content AlGaAs layers to native aluminum oxide (AlO) layers through the process of thermal oxidation. This selective conversion of microcavity …

Design And Characterization Of Optically Pumped Vertical Cavity Surface Emitting Lasers, Richard J. Bagnell

Theses and Dissertations

Vertical Cavity Surface Emitting Lasers (VCSELs) are a form of semiconductor laser which have their cavity oriented orthogonally to the plane of the wafer. The orientation necessitates short cavities, highly reflective mirrors and a relatively high gain/loss ratio. Even so, the resultant superior exit beam characteristics and the tight packing density of the finished lasers provide strong motivation for pursuing the growth of these structures. This thesis details the design of an optically pumped InGaAs multiple quantum well periodic gain structure VCSEL with a 950 nm lasing wavelength. These growths were to be a first attempt at VCSEL construction, so …