Electromagnetics and Photonics Commons^™

Development Of Periodic Plasmonic Nano-Structures For Enhanced Labeled Bio-Sensing Systems, Kyle Zackary Smith

Graduate Theses, Dissertations, and Problem Reports (ETD)

The biomedical industry has seen sustained growth over the past half century, with a continually increasing demand for flexible, easy-to-use, and cost-effective tools. One large area of commercial interest has been point-of-use or point-of-care diagnostics, using optical based Lab-On-Chip (LOC) style systems. Label and label-free fluorescence detection systems are common benchtop modalities that have seen recent integration into these portable, cost-effective LOC applications. However, despite their maturity, there are still opportunities to improve device characteristics, specifically in reference to throughput, limit-of-detection (LOD), and hybrid integration (along with associated costs).

Optical research avenues at WVU have focused on improving these systems …

Ellipticity-Controlled Exceptional Points From Nanoscale Metasurfaces, Benjamin Goldberg

McKelvey School of Engineering Graduate Student Theses & Dissertations

Precise control over light polarization is critical for advancing technologies in telecommunica- tions, quantum computing, and image sensing. However, existing methods for manipulating polarization around exceptional points in non-Hermitian systems, have exclusively focused on circular polarization and work with reflected light. To address this limitation, we de- velop a novel metasurface platform with high-Q resonators that enables tunable control of polarization exceptional points across arbitrary ellipticity for transmitted light. Our design uses orthogonally polarized guided mode resonators in a two-layer silicon metasurface, where careful tuning of the dipolar guided mode resonances (DGMRs) and layer spacing allows us to control the …

Higher Order Bessel Beams Integrated In Time (Hobbit) With Engineered Light Frequencies And Applications In Computational Imaging, Tyler Cramer

All Theses

This thesis presents an adaptive optical system which leverages the frequency shifts from an acousto-optic deflector (AOD) form an array of uniformly spaced frequency diverse beamlets. These beamlets are then spatially transformed (wrapped) into a circular array forming a non-diffracting ring with an unprecedented orbital angular momentum (OAM) mode switching rate of 50Mhz with an OAM range of ±64. Along with frequency diversity, the non-diffracting range of the beams are analyzed 6 Rayleigh ranges of an equivalently sized gaussian beam. Inherent in the frequencies superposed on the AOD are associated relative phases which can be controlled to form sets of …

Nanostructured Silicon Meta-Waveguides And Surfaces For Enhanced Light-Matter Interaction, Saddam Gafsi

All Dissertations

In this study, we tackle the challenge of light-matter interaction engineering and local field enhancement using various silicon photonic platforms based on three different approaches. (i) The first approach is based on boundary condition engineering where we present and show through simulation and experimental results, a silicon nanodisk “diabolo” configuration able to support significant local field enhancement levels in the range ~102 to 104 in the high index medium through proper structural modifications at the nanoscale. We show that the presented optical behavior is consistent with the anapole modes characterized by the observed near-field enhancement and coinciding with far-field suppression. …

Parallel Communications In Single-Core Optical Fibers Utilizing Spatial Domain Multiplexing And Wavelength Division Multiplexing, Mingxuan Tu

Theses and Dissertations

This endeavor proposes a hybrid parallel optical communication architecture in single-core fibers combining WDM in O-band (1270 nm, 1310 nm, 1310 nm, and 1330 nm) and two-channel SDM. The proposed architecture applies carefully designed delays in each propagating channel to achieve synchronization and, therefore, realizes parallel transmission in single-core fibers without the help of Serializer/De-serializers (SerDes). A mathematical model of SDM, calculations on delays between each optical channel, simulation of the hybrid architecture, experimental setup, and the testing and analysis of channel performance have been provided. A design of a photonic integrated circuit based on thin film lithium niobate electro-optic …

Photophoretic Optical Trapping, Essa Ababseh

Electrical Engineering

Photophoretic Optical Trapping (POT) is a relatively new concept in the field of optics which has potential application in 3D display. The POT is realized by confining a particle within a very small location of the optical system, mostly around the focus. The particle, if captured by the beam, has the potential to print visible 3D images in free space. Our POT system is encapsulated by an acrylic enclosure, which also incorporates a biconvex lens as well as an adjustable focus laser module. Particles are released around the top of the lens’ focal point until the captured particle can be …

Study Of Single-Photon Wave-Packets With Atomically Thin Nonlinear Mirrors, Christopher Klenke

Graduate Theses and Dissertations

A novel controlled phase gate for photonic quantum computing is proposed by exploiting the powerful nonlinear optical responses of atomically thin transition metal dichalcogenides (TMDs) and it is shown that such a gate could elicit a π-rad phase shift in the outgoing electric field only in the case of two incident photons and no other cases. Firstly, the motivation for such a gate is developed and then the implementation of monolayer TMDs is presented as a solution to previous realization challenges. The single-mode case of incident photons upon a TMD is derived and is then used to constrain the more …

Three Dimensional Photonics Structures: Design And Applications, Mansoor Sultan

Theses and Dissertations--Electrical and Computer Engineering

Photonics is an emerging technology for light control, emission, and detection. Photonic devices control photons the same way electronic circuits control electrons in active or passive mode depending on the energy requirement of the device. This dissertation will discuss the design, fabrication, testing of photonic structures with applications including imaging and renewable energy. First, we developed a novel lithography method for fluoropolymer resist based on variable pressure electron beam lithography (VP-EBL). VP-EBL proves to be an efficient method for patterning a widely used, but challenging to process, fluoropolymer, Teflon AF. However, rather than solely mitigating charging, the ambient gas is …

Fabrication And Characterization Of Photodetector Devices Based On Nanostructured Materials: Graphene And Colloidal Nanocrystals, Wafaa Gebril

Graduate Theses and Dissertations

Photodetectors are devices that capture light signals and convert them into electrical signals. High performance photodetectors are in demand in a variety of applications, such as optical communication, security, and environmental monitoring. Among many appealing nanomaterials for novel photodetection devices, graphene and semiconductor colloidal nanocrystals are promising candidates because of their desirable and unique properties compared to conventional materials.

Photodetector devices based on different types of nanostructured materials including graphene and colloidal nanocrystals were investigated. First, graphene layers were mechanically exfoliated and characterized for device fabrication. Self-powered few layers graphene phototransistors were studied. At zero drain voltage bias and room …

Independent And Simultaneous Control Of Electromagnetic Wave Properties In Self-Collimating Photonic Crystals Using Spatial Variance, Jesus Javier Gutierrez

Open Access Theses & Dissertations

Photonic crystals are engineered periodic structures that provide great control over electromagnetic waves. One of these mechanisms is self-collimation, in which the electromagnetic wave travels through the photonic crystal along an axis of the lattice without diffracting or spreading. This mechanism of self-collimation is a dispersion phenomenon, which is dependent on the unit cell's physical and geometrical characteristics. An algorithm for generating spatially variant lattices (SVL) was developed that can change geometrical properties in photonic crystals as a function of position, like unit cell orientation, fill fraction, symmetry, and others in a manner that is smooth, continuous, and virtually free …

Low-Loss, Compact, Spot-Size-Converter Based Vertical Couplers For Photonic Integrated Circuits, Praveen K.J. Singaravelu, G.C.R. Devarapu, Sebastian A. Schulz, Quentin Wilmart, Stéphane Malhouitre, Ségolène Olivier, Liam O’Faolain

Cappa Publications

In recent years, the monolithic integration of new materials such as SiN, Ge and LiNbO3 on silicon (Si) has become important to the Si photonics community due to the possibility of combining the advantages of both material systems. However, efficient coupling between the two different layers is challenging. In this work, we present a spot size converter based on a two-tier taper structure to couple the optical mode adiabatically between Si and SiN. The fabricated devices show a coupling loss as low as 0.058 dB  ±  0.01 dB per transition at 1525 nm. The low coupling loss between the Si …

Experimental Optical Pulse Picker For Lawrence Livermore National Lab, Alexander Thomas Wargo

Master's Theses

Proprietary.

Mid-Infrared Optical Sensing Using Sub-Wavelength Gratings, Brian Hogan, Liam Lewis, Michael Mcauliffe, Stephen P. Hegarty

Cappa Publications

Optical sensing has shown great potential for both quantitative and qualitative analysis of compounds. In particular sensors which are capable of detecting changes in refractive index at a surface as well as in bulk material have received much attention. Much of the recent research has focused on developing technologies that enable such sensors to be deployed in an integrated photonic device. In this work we demonstrate experimentally, using a sub-wavelength grating the detection of ethanol in aqueous solution by interrogating its large absorption band at 9.54 µm. Theoretical investigation of the operating principle of our grating sensor shows that in …

Growth And Characterization Of Silicon-Germanium-Tin Semiconductors For Future Nanophotonics Devices, Bader Saad Alharthi

Graduate Theses and Dissertations

The bright future of silicon (Si) photonics has attracted research interest worldwide. The ultimate goal of this growing field is to develop a group IV based Si foundries that integrate Si-photonics with the current complementary metal–oxide–semiconductor (CMOS) on a single chip for mid-infrared optoelectronics and high speed devices. Even though group IV was used in light detection, such as photoconductors, it is still cannot compete with III-V semiconductors for light generation. This is because most of the group IV elements, such as Si and germanium (Ge), are indirect bandgap materials. Nevertheless, Ge and Si attracted industry attention because they are …

Effects Of Fabrication Errors On The Focusing Performance Of A Sector Metalens, S. S. Stafeev, A. G. Nalimov, Liam O’Faolain, M. V. Kotlyar

Cappa Publications

Using e-beam lithography, a 16-sector spiral metalens was fabricated in an amorphous silicon, capable of converting linearly polarized incident light into an azimuthally polarized optical vortex. When illuminated by a 633-nm linearly polarized laser beam, the metalens generated a near-surface subwavelength focal spot equal to 0.75 of the incident wavelength at full-width of half-maximum intensity. The focusing performance of the spiral metalens was numerically shown to be sensitive to the deviation of the factual microrelief from the calculated height. For the designed microrelief height, a circularly polarized incident beam was focused into a bright ring with a reverse energy flow …

Si-Based Germanium Tin Semiconductor Lasers For Optoelectronic Applications, Sattar H. Sweilim Al-Kabi

Graduate Theses and Dissertations

Silicon-based materials and optoelectronic devices are of great interest as they could be monolithically integrated in the current Si complementary metal-oxide-semiconductor (CMOS) processes. The integration of optoelectronic components on the CMOS platform has long been limited due to the unavailability of Si-based laser sources. A Si-based monolithic laser is highly desirable for full integration of Si photonics chip. In this work, Si-based germanium-tin (GeSn) lasers have been demonstrated as direct bandgap group-IV laser sources. This opens a completely new avenue from the traditional III-V integration approach. In this work, the material and optical properties of GeSn alloys were comprehensively studied. …

Wavelength Accuracy Study For High-Density Fiber Bragg Grating Sensor Systems Using A Rapidly-Swept Akinetic-Laser Source, Jacob Egorov

Master's Theses

This thesis studies the center wavelength accuracy of a Fiber Bragg Grating Sensor system that has a large number of sensor elements both as a function of wavelength and as a function of position. Determining the center wavelength of each of the fiber optic sensors is a critical parameter that ultimately determines sensor accuracy. The high density environment can result in degradation of accuracy of the center wavelength measurement. This thesis aims to quantify this measurement error both with theoretical and experimental studies.

There are many sensing applications where optical fiber sensors are preferred over electrical sensors, such as the …

Multimaterial Fibers In Photonics And Nanotechnology, Guangming Tao

Electronic Theses and Dissertations

Recent progress in combing multiple materials with distinct optical, electronic, and thermomechanical properties monolithically in a kilometer-long fiber drawn from a preform offers unique multifunctionality at a low cost. A wide range of unique in-fiber devices have been developed in fiber form-factor using this strategy. Here, I summary my recent results in this nascent field of 'multimaterial fibers'. I will focus on my achievements in producing robust infrared optical fibers and in appropriating optical fiber production technology for applications in nanofabrication. The development of optical components suitable for the infrared (IR) is crucial for applications in this spectral range to …

The Impact Of Growth Conditions On Cubic Znmgo Ultraviolet Sensors, Ryan Boutwell

Electronic Theses and Dissertations

Cubic Zn1-xMgxO (c-Zn1-xMgxO) thin films have opened the deep ultraviolet (DUV) spectrum to exploration by oxide optoelectronic devices. These extraordinary films are readily wet-etch-able, have inversion symmetric lattices, and are made of common and safe constituents. They also host a number of new exciting experimental and theoretical challenges. Here, the relation between growth conditions of the c-Zn1-xMgxO film and performance of fabricated ultraviolet (UV) sensors is investigated. Plasma-Enhanced Molecular Beam Epitaxy was used to grow Zn1-xMgxO thin films and formation conditions were explored by varying the growth temperature, Mg source flux, oxygen flow rate, and radio-frequency (RF) power coupled into …

Optically Isotropic Liquid Crystals For Display And Photonic Applications, Jin Yan

Electronic Theses and Dissertations

For the past few decades, tremendous progress has been made on liquid crystal display (LCD) technologies in terms of stability, resolution, contrast ratio, and viewing angle. The remaining challenge is response time. The state-of-the-art response time of a nematic liquid crystal is a few milliseconds. Faster response time is desirable in order to reduce motion blur and to realize color sequential display using RGB LEDs, which triples the optical efficiency and resolution density. Polymer-stabilized blue phase liquid crystal (PS-BPLC) is a strong candidate for achieving fast response time because its self-assembled cubic structure greatly reduces the coherence length. The response …

Plasmonic And Photonic Designs For Light Trapping In Thin Film Solar Cells, Liming Ji

Graduate Theses and Dissertations

Thin film solar cells are promising to realize cheap solar energy. Compared to conventional wafer cells, they can reduce the use of semiconductor material by 90%. The efficiency of thin film solar cells, however, is limited due to insufficient light absorption. Sufficient light absorption at the bandgap of semiconductor requires a light path more than 10x the thickness of the semiconductor. Advanced designs for light trapping are necessary for solar cells to absorb sufficient light within a limited volume of semiconductor. The goal is to convert the incident light into a trapped mode in the semiconductor layer.

In this dissertation, …

Non-Reciprocal Wave Transmission In Integrated Waveguide Array Isolators, Tony Yatming Ho

Electronic Theses and Dissertations

Non-reciprocal wave transmission is a phenomenon witnessed in certain photonic devices when the wave propagation dynamics through the device along one direction differs greatly from the dynamics along the counter-propagating direction. Specifically, it refers to significant power transfer occurring in one direction, and greatly reduced power transfer in the opposite direction. The resulting effect is to isolate the directionality of wave propagation, allowing transmission to occur along one direction only. Given the popularity of photonic integrated circuits (PIC), in which all the optical components are fabricated on the same chip so that the entire optical system can be made more …

Multi-Wavelength, Multi-Beam, Photonic Based Sensor For Object Discrimination And Positioning, Kavitha Venkataraayan

Theses: Doctorates and Masters

Over the last decade, substantial research efforts have been dedicated towards the development of advanced laser scanning systems for discrimination in perimeter security, defence, agriculture, transportation, surveying and geosciences. Military forces, in particular, have already started employing laser scanning technologies for projectile guidance, surveillance, satellite and missile tracking; and target discrimination and recognition. However, laser scanning is relatively a new security technology. It has previously been utilized for a wide variety of civil and military applications. Terrestrial laser scanning has found new use as an active optical sensor for indoors and outdoors perimeter security. A laser scanning technique with moving …

Inductively Coupled Plasma Dry Etching Process On Planar Lightwave Circuit Fabrication., Chuah Khoon Seah

Student Works (2010-2019)

The main objective of this project is to master state-of-the-art techniques and knowledge in silica etching in order to achieve high quality waveguide circuit on Planar Lightwave Circuit devices. Another objective is to optimize the clean room research strength, surface characterization, microscopy techniques and similar semiconductor manufacturing processes.Initially, these processes were conducted with wet etching method that utilized diluted hydrofluoric acid (HF) and buffered oxide etch (BOE). Several problems arising such as mask peel-off, poor sidewall profile and defect waveguide channel during the pattern transfer process due to its’ isotropic nature. Alternatively, dry etching method was conducted via Inductively Coupled …

Micro-Optic-Spectral-Spatial-Elements (Mosse), Alok Ajay Mehta

Electronic Theses and Dissertations

Over a wide range of applications, optical systems have utilized conventional optics in order to provide the ability to engineer the properties of incident infra-red fields in terms of the transmitted field spectral, spatial, amplitude, phase, and polarization characteristics. These micro/nano-optical elements that provide specific optical functionality can be categorized into subcategories of refractive, diffractive, multi-layer thin film dichroics, 3-D photonic crystals, and polarization gratings. The feasibility of fabrication, functionality, and level of integration which these elements can be used in an optical system differentiate which elements are more compatible with certain systems than others. With enabling technologies emerging allowing …

Design And Assessment Of Compact Optical Systems Towards Special Effects Imaging, Vesselin Chaoulov

Electronic Theses and Dissertations

A main challenge in the field of special effects is to create special effects in real time in a way that the user can preview the effect before taking the actual picture or movie sequence. There are many techniques currently used to create computer-simulated special effects, however current techniques in computer graphics do not provide the option for the creation of real-time texture synthesis. Thus, while computer graphics is a powerful tool in the field of special effects, it is neither portable nor does it provide work in real-time capabilities. Real-time special effects may, however, be created optically. Such approach …

Modeling And Simulation Of Photonic Crystal Fibers Using Finite Difference Frequency Domain Method, Md. Khalid Ikram

Electrical & Computer Engineering Theses & Dissertations

Photonic crystal fibers (PCFs) allow guiding light in low-index core. These fibers exhibit properties such as single-mode operation in broad wavelength region. The mode shape and group velocity dispersion can be controlled by designing the microstructures of the cladding. In order to study these properties, a fast, efficient, and highly accurate numerical modeling method is required.

A full-vectorial finite-difference frequency-domain (FDFD) method is implemented. The modal properties of conventional step index fiber and index-guiding PCF are analyzed using this modeling technique. Compared to plane wave expansion and biorthogonal basis methods, FDFD is found to be simple, reliable, and efficient. PCFs …

Modifications To Mcnp, Version 3b: Incorporating A Variable Density Atmosphere. Addendum, David L. Monti, Kirk A. Mathews

AFIT Documents

MCNP version 3B was modified to incorporate a continuously variable density atmosphere. This was accomplished by representing the variation of air density as a function of altitude with a series of continuous piecewise exponential curves up to a maximum altitude of 1000 km. User-written subroutines and functions were written which incorporated these piecewise functions. These subroutines and functions were subsequently incorporated into a production version of MCNP. Several MCNP subroutines and files were modified in support of these modifications. This report discusses detailed information regarding the theoretical development of the variable density model, the user written subroutines and functions, the …