Electromagnetics and Photonics Commons^™

Characterization Of Hydride Vapor Phase Epitaxy Grown Gan Substrates For Future Iii-Nitride Growth, Alaa Ahmad Kawagy

Graduate Theses and Dissertations

The aim of this research is to investigate and characterize the quality of commercially obtained gallium nitride (GaN) on sapphire substrates that have been grown using hydride vapor phase epitaxy (HVPE). GaN substrates are the best choice for optoelectronic applications because of their physical and electrical properties. Even though HVPE GaN substrates are available at low-cost and create the opportunities for growth and production, these substrates suffer from large macro-scale defects on the surface of the substrate.

In this research, four GaN on sapphire substrates were investigated in order to characterize the surface defects and, subsequently, understand their influence on …

Experimental And Computational Study On Magnetic Nanowires Of Layered Titanates, Caleb Layne Heath

Graduate Theses and Dissertations

The intricate nanostructures of layered titanates are unique among nanomaterials due to their easy and inexpensive syntheses. These nanomaterials have been proven valuable for use in industries as varied as energy, water treatment, and healthcare, and can be produced at industrial scales using already existent equipment. They have complex morphology, and surface structure well suited to chemical modification and doping. However, there is a longstanding debate on their lattice structure after the doping. There is a long-unmet need to understand, using both experimental and simulation methods, how dopants alter the clay-like layered crystal structure and associated physical and chemical properties. …

Investigation Of Critical Technologies Of Chemical Vapor Deposition For Advanced (Si)Gesn Materials, Joshua Matthew Grant

Graduate Theses and Dissertations

The development of new materials for efficient optoelectronic devices from Group IV elements is the heart of Group IV photonics. This has direct ties to modern technology as the foundation for the electronics industry is silicon. This has driven the development of silicon-based optoelectronics using these other Group IV materials as silicon is a poor optical material due to its indirect band gap when compared to the III-V semiconductors that are used by most of the optoelectronics industry. While efforts have been made to integrate III-V materials onto silicon substrates, the incompatibility with the complementary metal oxide semiconductor process has …

Urban Underground Infrastructure Monitoring Iot: The Path Loss Analysis, Abdul Salam, Syed Shah

Faculty Publications

The extra quantities of wastewater entering the pipes can cause backups that result in sanitary sewer overflows. Urban underground infrastructure monitoring is important for controlling the flow of extraneous water into the pipelines. By combining the wireless underground communications and sensor solutions, the urban underground IoT applications such as real time wastewater and storm water overflow monitoring can be developed. In this paper, the path loss analysis of wireless underground communications in urban underground IoT for wastewater monitoring has been presented. It has been shown that the communication range of up to 4 kilometers can be achieved from an underground …

Non-Invasive Beam Monitoring With Harmonic Cavities, Brock F. Roberts

Electrical and Computer Engineering ETDs

NON INVASIVE BEAM MONITORING WITH HARMONIC CAVITIES

by

Brock Franklin Roberts

B.S PHYSICS, UNIVERSITY OF CALIFORNIA DAVIS, 1992

DOCTOR OF PHILOSOPHY IN ELECTRICAL ENGINEERING

UNIVERSITY OF NEW MEXICO, 2019

ABSTRACT

A cavity designed to have multiple harmonic TM0N0 modes can be used to accurately measure the longitudinal profile of a bunched charged particle beam passing through its bore, non-invasively, and in real time.

Multi-harmonic TM0N0 cavities were designed, constructed, and beamline tested in a variety of experiments at the Thomas Jefferson National Accelerator Facility (TJNAF or Jlab). Measurements with a sampling oscilloscope provided signals that resemble the profile of electron …

An Underground Radio Wave Propagation Prediction Model For Digital Agriculture, Abdul Salam

Faculty Publications

Underground sensing and propagation of Signals in the Soil (SitS) medium is an electromagnetic issue. The path loss prediction with higher accuracy is an open research subject in digital agriculture monitoring applications for sensing and communications. The statistical data are predominantly derived from site-specific empirical measurements, which is considered an impediment to universal application. Nevertheless, in the existing literature, statistical approaches have been applied to the SitS channel modeling, where impulse response analysis and the Friis open space transmission formula are employed as the channel modeling tool in different soil types under varying soil moisture conditions at diverse communication distances …

Design And Performance Evaluation Of Linear And Axial-Flux Magnetic Gears, Mojtaba Bahrami Kouhshahi

Dissertations and Theses

The conversion from low speed to high speed and vice versa in various forms, including rotary and linear motion, is a requirement for a wide range of applications. For example, wind power generation requires a conversion of low speed rotation of turbine blades to high speed generator rotation, and ocean wave power generation is achievable by conversion of low speed linear motion to either high speed rotation or high speed linear motion. Mechanical gearboxes, hydraulic and pneumatic actuators are commonly used to achieve these conversions. However, these systems suffer from reliability issues, high maintenance requirements, noise, and lack of overload …

Ultrashort Cross-Correlation In The Middle Infrared: A Novel Approach To Standoff Detection, William Conner Thomas

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Lasers are a common tool in standoff detection because of their small divergence, large amount of power, and multiple wavelengths available for optical interaction. Optical signatures of targets can be composed of but are not limited to absorption, fluorescence, backscatter, polarization manipulation, and plasma spectra. This work was an investigation of a new signature phenomenon: Dispersion of middle infrared ultrashort laser pulses through gas and vapor phase molecules. Vibrational and rovibrational absorption lines of molecular species affect the spectral phase and spectral amplitude of ultrashort light pulses leading an inititally gaussian temporal profile to become distorted. This dissertation is an …

Modeling Land Subsidence Using Insar And Airborne Electromagnetic Data, Ryan G. Smith, R. Knight

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Land subsidence as a result of groundwater overpumping in the San Joaquin Valley, California, is associated with the loss of groundwater storage and aquifer contamination. Although the physical processes governing land subsidence are well understood, building predictive models of subsidence is challenging because so much subsurface information is required to do so accurately. For the first time, we integrate airborne electromagnetic data, representing the subsurface, with subsidence data, mapped by interferometric synthetic aperture radar (InSAR), to model deformation. By combining both data sets, we are able to solve for hydrologic and geophysical properties of the subsurface to effectively model the …

Fabrication Of Biased-Magnetorheological Elastomers (B-Mre) Based On Magnetized Ferromagnetic Particles, Choonghan Lee, Woosoon Yim

Mechanical Engineering Faculty Research

Magnetorheological elastomers (MREs), like MR fluids, exploit magnetic forces between ferromagnetic particles to produce a material with instantaneously adjustable properties of stiffness and damping with external magnetic fields. In MREs, the particles are a part of a structured elastomer matrix, and an external magnetic field is applied to achieve an instantaneous change of stiffness due to magnetic forces between particles. A drawback of conventional MREs is its inability of softening (reduce stiffness) under an external field. Many engineering applications need an instant change of its stiffness in both directions, which requires a magnetic bias embedded in the MRE. One way …

Designing Liquid Crystal For Optoacoustic Detection, Michael T. Dela Cruz

Theses and Dissertations

This research impacts the development of a cost-saving, on-chip device that can replace a wide range of costly, bulky sensors for commercial and defense applications. In particular, the goals of this work were to design and test a sensor that uses the optical properties of liquid crystal (LC) to detect acoustic waves. This began with developing a method to fine-tune the optical features of the liquid crystal. Statistical analysis of select experimental variables, or factors, lead to ideal settings of those variables when creating the sensor. A two-factor and three-factor experiment were separately conducted and analyzed as a preliminary demonstration …

Electromagnetic Characterization Of Conductor-Backed Media Using Stepped Rectangular Waveguide, Avian Y. Hughes

Theses and Dissertations

A new single stepped-iris waveguide technique is used to nondestructively determine the permittivity and permeability of conductor-backed media. This thesis will demonstrate a proof-of-concept that obtains two independent reflection measurements with a magnetic radar absorbing material (magRAM). Using a two measurement procedure, in which, the first measurement will apply a single rectangular waveguide to a known conductor-backed absorbing material under test (MUT) and the second measurement will insert a stepped-iris in between the single rectangular waveguide and MUT reducing the aperture to retrieve two independent electromagnetic properties (i.e. permittivity and permeability). The theoretical reflection coefficients are obtained using a rigorous …

Displacement Damage Effects In Gesn Light Emitting Diodes, Kevin K. Choe

Theses and Dissertations

Potential future use on Earth-orbiting satellites calls for investigation into the suitability of GeSn based photonic devices in high energy proton environments. The electroluminescence (EL) intensity of Ge1-xSnx (x = 0, 0.02, 0.069, and 0.094) light emitting diodes was measured before and after irradiation by 2 MeV protons at relatively high fluence levels. The results showed that GeSn devices with higher Sn content were up to 10 times more resistant against proton displacement damage than the pure Ge (x = 0) devices. As Sn concentration increased, the band gap decreased, and V-P hole trap energy level moved further from the …

Ballistic Evaluation Of Carbon Nanotube Sheet Material In Multifunctional Applications, Casey M. Keilbarth

Theses and Dissertations

Significant development of carbon nanotubes has occurred since they were first studied in the 1990's. Attempts to capture the phenomenal molecular properties in practical applications are gaining ground as new methods of producing CNTs have been developed. This thesis sought to determine if the addition of commercially produced CNT sheets to thin carbon fiber panels improved the ballistic properties of the panel. The difference between 0 and 4 CNT sheets was studied. The hypothesis was that inte- grating CNT sheets into the laminate would increase the projectile energy absorbed by the panel and reduce the damage to the panel incurred …

Development Of A Set Of Pre-Class Videos For Electromagnetic Theory, Benjamin Mcpheron, Josiah D. Kunz

ASEE IL-IN Section Conference

One important aspect of experiential learning is allowing students time to reflect on new concepts before the application of the material. Most commonly, this is attempted by assigning readings from a textbook, but research suggests that few students complete these readings. This discouraging fact has prompted the use of other resources, such as videos, to supplement pre-class readings in order to introduce new material. Previous work has been completed by this author to produce pre-class videos for use in an introductory circuits course. This paper extends that work to the development of pre-class videos for a senior level electrical engineering …

Low-Loss, Compact, Spot-Size-Converter Based Vertical Couplers For Photonic Integrated Circuits, Praveen K.J. Singaravelu, G.C.R. Devarapu, Sebastian A. Schulz, Quentin Wilmart, Stéphane Malhouitre, Ségolène Olivier, Liam O’Faolain

Cappa Publications

In recent years, the monolithic integration of new materials such as SiN, Ge and LiNbO3 on silicon (Si) has become important to the Si photonics community due to the possibility of combining the advantages of both material systems. However, efficient coupling between the two different layers is challenging. In this work, we present a spot size converter based on a two-tier taper structure to couple the optical mode adiabatically between Si and SiN. The fabricated devices show a coupling loss as low as 0.058 dB  ±  0.01 dB per transition at 1525 nm. The low coupling loss between the Si …

A State-Of-The-Art Survey On Deep Learning Theory And Architectures, Md Zahangir Alom, Tarek M. Taha, Christopher Yakopcic, Stefan Westberg, Paheding Sidike, Mst Shamima Nasrin, Mahmudul Hasan, Brian C. Van Essen, Abdul A. S. Awwal, Vijayan K. Asari

Electrical and Computer Engineering Faculty Publications

In recent years, deep learning has garnered tremendous success in a variety of application domains. This new field of machine learning has been growing rapidly and has been applied to most traditional application domains, as well as some new areas that present more opportunities. Different methods have been proposed based on different categories of learning, including supervised, semi-supervised, and un-supervised learning. Experimental results show state-of-the-art performance using deep learning when compared to traditional machine learning approaches in the fields of image processing, computer vision, speech recognition, machine translation, art, medical imaging, medical information processing, robotics and control, bioinformatics, natural language …

A Focal Plane Array And Electronics Model For Cmos And Ccd Sensors In The Afit Sensor And Scene Emulation Tool (Asset), Fernando D. Fernandez

Theses and Dissertations

Electro-optical and infrared (EO/IR) sensor models are useful tools that can facilitate understanding a system's behavior without expensive and time-consuming testing of an actual system. EO/IR models are especially important to the military industry where truth data is required but is sometimes impractical to obtain through experimentation due to expense or difficulties in procuring hardware. This work describes implementation of a focal plane array (FPA) model of charge-coupled device (CCD) and complementary metal-oxide semiconductor (CMOS) photodetectors as a component in the Air Force Institute of Technology (AFIT) Sensor and Scene Emulation Tool (ASSET). The FPA model covers conversion of photo-generated …

Optical And Electron Paramagnetic Resonance Characterization Of Point Defects In Semiconductors, Elizabeth M. Scherrer

Theses and Dissertations

Point defects in two semiconductor materials, both with promising optical properties, are investigated. The first material, CdSiP₂, is a nonlinear optical material in which absorption bands due to point defects can hinder performance when used in frequency conversion applications in the infrared. The second material, Sn₂P₂S₆, is a photorefractive material where point defects with specific properties are needed to optimize response in dynamic holography applications. Electron paramagnetic resonance (EPR) spectroscopy is used to identify the electronic structure of defects and their charge states. Correlations between EPR spectra and optical absorption allow assignments …

Experimental Optical Pulse Picker For Lawrence Livermore National Lab, Alexander Thomas Wargo

Master's Theses

Proprietary.

A Theoretical Model Of Underground Dipole Antennas For Communications In Internet Of Underground Things, Abdul Salam, Mehmet C. Vuran, Xin Dong, Christos Argyropoulos, Suat Irmak

Faculty Publications

The realization of Internet of Underground Things (IOUT) relies on the establishment of reliable communication links, where the antenna becomes a major design component due to the significant impacts of soil. In this paper, a theoretical model is developed to capture the impacts of change of soil moisture on the return loss, resonant frequency, and bandwidth of a buried dipole antenna. Experiments are conducted in silty clay loam, sandy, and silt loam soil, to characterize the effects of soil, in an indoor testbed and field testbeds. It is shown that at subsurface burial depths (0.1-0.4m), change in soil moisture impacts …

Design And Implementation Of A 72 & 84 Ghz Terrestrial Propagation Experiment; Exploitation Of Nexrad Data To Statistically Estimate Rain Attenuation At 72 Ghz, Nicholas Pawel Tarasenko

Electrical and Computer Engineering ETDs

The wireless communication sector is rapidly approaching network capacities as a direct result of increasing mobile broadband data demands. In response, the Federal Communications Commission allocated 71-76 GHz “V-band” and 81-86 GHz “W-band” for terrestrial and satellite broadcasting services. Movement by the telecommunication industry towards W/V-band operations is encumbered by a lack of validated and verified propagation models, specifically models to predict attenuation due to rain. Additionally, there is insufficient data available at W/V-bands to develop or test propagation models. The first aim of this study was the successful installation and operation of a terrestrial link to collect propagation data …

Electrochromic Semiconductors As Colorimetric Sers Substrates With High Reproducibility And Renewability, Shan Cong, Zhen Wang, Wenbin Gong, Zhigang Chen, Weibang Lu, John R. Lombardi, Zhigang Zhao

Publications and Research

Electrochromic technology has been actively researched for displays, adjustable mirrors, smart windows, and other cutting-edge applications. However, it has never been proposed to overcome the critical problems in the field of surface-enhanced Raman scattering (SERS). Herein, we demonstrate a generic electrochromic strategy for ensuring the reproducibility and renewability of SERS substrates, which are both scientifically and technically important due to the great need for quantitative analysis, standardized production and low cost in SERS. This color-changing strategy is based on a unique quantitative relationship between the SERS signal amplification and the coloration degree within a certain range, in which the SERS …

Mid-Infrared Optical Sensing Using Sub-Wavelength Gratings, Brian Hogan, Liam Lewis, Michael Mcauliffe, Stephen P. Hegarty

Cappa Publications

Optical sensing has shown great potential for both quantitative and qualitative analysis of compounds. In particular sensors which are capable of detecting changes in refractive index at a surface as well as in bulk material have received much attention. Much of the recent research has focused on developing technologies that enable such sensors to be deployed in an integrated photonic device. In this work we demonstrate experimentally, using a sub-wavelength grating the detection of ethanol in aqueous solution by interrogating its large absorption band at 9.54 µm. Theoretical investigation of the operating principle of our grating sensor shows that in …

Theoretical Analysis Of A Volume Holographic Lens Using Matlab, Sanjay Keshri, Kevin Murphy, Izabela Naydenova, Suzanne Martin

Conference Papers

Volume holographic lenses have great potential for different types of applications requiring light redirection and beam shaping such as solar light collection and LED light management. For lighting applications using LEDs, it is essential to make a highly efficient optical element to be placed in front of the LED in order to decrease energy losses. For that reason, a careful theoretical analysis of the properties and operation regime of the lens must be carried out at the design stage. The characteristics of focusing Holographic Optical Elements (HOE) depend on many factors including their thickness, spatial frequency, the angular range of …

Sensing Of Multiple Parameters With Whispering Gallery Mode Optical Fiber Micro-Resonators, Arun Kumar Mallik Dr, Vishnan Kavungal, Gerald Farrell, Yuliya Semenova

Conference Papers

Monitoring of multiple physical parameters, such as humidity, temperature, strain, concentrations of certain chemicals or gases in various environments is of great importance in many industrial applications both for minimizing adverse effects on human health as well as for maintaining production levels and quality of products. In this paper we demonstrate two different approaches to the design of multi-parametric sensors using coupled whispering gallery mode (WGM) optical fiber micro-resonators. In the first approach, a small array of micro-resonators is coupled to a single fiber taper, while in the second approach each of the micro-resonators within an array is coupled to …

Microwave Detection Of Surface Breaking Cracks In Metallic Structures Under Heavy Corrosion And Paint, John Robert Gallion

Masters Theses

"We live in the world of "aging infrastructures". In this environment, critical and heavily utilized infrastructure, i.e. ships, planes, bridges, etc., are operating at or beyond their designed age. Replacement is no longer an option and "retirement for cause" is the current approach to maintenance and replacement. Consequently, there is an ever-increasing demand for efficient and robust nondestructive evaluation (NDE) methods that can determine the physical health of these structures. Large structures, which are primarily made of metals, either steel or aluminum, are susceptible to high-stress cracking and corrosion. Stress-induced cracks in heavily corroded steel, used in bridges, railroads, storage …

Passively-Coded Embedded Microwave Sensors For Materials Characterization And Structural Health Monitoring (Shm), Katelyn Rose Brinker

Masters Theses

"Monitoring and maintaining civil, space, and aerospace infrastructure is an ongoing critical problem facing our nation. As new complex materials and structures, such as multilayer composites and inflatable habitats, become ubiquitous, performing inspection of their structural integrity becomes even more challenging. Thus, novel nondestructive testing (NDT) methods are needed. Chipless RFID is a relatively new technology that has the potential to address these needs. Chipless RFID tags have the advantage of being wireless and passive, meaning that they do not require a power source or an electronic chip. They can also be used in a variety of sensing applications including …

2x-Thru, 1x-Reflection, And Thru-Line De-Embedding: Theory, Sensitivity Analysis, And Error Corrections, Bichen Chen

Doctoral Dissertations

"Due to the simplicity of design and measurement, as well as the accuracy of results, the 2X-Thru de-embedding (2XTD), 1X-Reflection de-embedding (1XRD), and Thru-Line de-embedding (TLD) have been replaced the traditional de-embedding algorithms, such as TRL and SOLT. In this dissertation, theory of 2ⁿ-port 2XTD, 1XRD, and TLD are completely derived first. The self-error reduction schemes is introduced to mitigate the de-embedding errors due to non-ideal manufacturing effects of non-zero mode conversion terms, as well as the asymmetric, and manufacturing variations. The validations are performed on both theory and self-error reduction through simulation and measurements cases. The 2X-Thru …

Passive Harmonic Generation At Spring Contacts, Sen Yang

Doctoral Dissertations

"In the first paper, the RF passive harmonic generation phenomenon on the spring contact is studied. A spring contact harmonic generation measurement system is developed. The factors that may have an impact on the spring contact harmonic generation, such as contact material, contact force, and contact resistance are characterized by the measurement system. The gold-to-gold contact is found to be much superior to the stainless-steel contacts. It is also found that the passive nonlinearity at the spring contact is the semiconductor-like junction formed by the surface oxide film.

In the second paper, we show that the maximum E-field coupling occurs …