Electromagnetics and Photonics Commons^™

Infrared Phased-Array Antenna-Coupled Tunnel Diodes, Brian Alan Slovick

Electronic Theses and Dissertations

Infrared (IR) dipole antenna-coupled metal-oxide-metal (MOM) tunnel diodes provide a unique detection mechanism that allows for determination of the polarization and wavelength of an optical field. By integrating the MOM diode into a phased-array antenna, the angle of arrival and degree of coherence of received IR radiation can be determined. The angular response characteristics of IR dipole antennas are determined by boundary conditions imposed by the surrounding dielectric or conductive environment on the radiated fields. To explore the influence of the substrate configuration, single dipole antennas are fabricated on both planar and hemispherical lens substrates. Measurements demonstrate that the angular …

Nano-Engineered High-Performance Magneto-Optic Garnet Materials, Mohammad Nur-E-Alam, Mikhail Vasiliev, Viacheslav Kotov, Kamal Alameh

ECU Presentations

No abstract provided.

Multi-Pose Face Recognition And Tracking System, Binu Muraleedharan Nair, Jacob Foytik, Richard Tompkins, Yakov Diskin, Theus Aspiras, Vijayan K. Asari

Electrical and Computer Engineering Faculty Publications

We propose a real time system for person detection, recognition and tracking using frontal and profile faces. The system integrates face detection, face recognition and tracking techniques. The face detection algorithm uses both frontal face and profile face detectors by extracting the 'Haar' features and uses them in a cascade of boosted classifiers. The pose is determined from the face detection algorithm which uses a combination of profile and frontal face cascades and, depending on the pose, the face is compared with a particular set of faces having the same range for classification. The detected faces are recognized by projecting …

Fluorinated Templates For Energy-Related Nanomaterials And Applications, Mohammed J. Meziani, Fushen Lu, Li Cao, Christopher E. Bunker, Elena A. Guliants, Ya-Ping Sun

Electrical and Computer Engineering Faculty Publications

Fluorinated ionomer membranes, as represented by the commercially available Nafion films, are macroscopically homogeneous and optically transparent but microscopically inhomogeneous with the presence of nanoscale hydrophilic cavities. These cavities serve as nanoscale reactors for the synthesis of nanoparticles from a variety of materials. The membranes with embedded nanoscale semiconductors, still optically transparent, have been used as sheet-photocatalysts for energy conversion applications, while those with embedded reactive metals used as nano-energetic materials for hydrogen generation and beyond. This chapter provides an overview on the templated synthesis of nanomaterials in fluorinated ionomer membranes and the various energy-related applications of this unique class …

Comparison Of Turbulence-Induced Scintillations For Multi-Wavelength Laser Beacons Over Tactical (7 Km) And Long (149 Km) Atmospheric Propagation Paths, Mikhail Vorontsov, Venkata S. Rao Gudimetla, Gary W. Carhart, Thomas Weyrauch, Svetlana Lachinova, Ernst Polnau, Joseph Rierson, Leonid A. Beresnev, Jony Jiang Liu, Jim F. Riker

Electrical and Computer Engineering Faculty Publications

We report results of the experimental analysis of atmospheric effects on laser beam propagation over two distinctive propagation paths: a long-range (149 km) propagation path between Mauna Loa (Island of Hawaii) and Haleakala (Island of Maui) mountains, and a tactical-range (7 km) propagation path between the roof of the Dayton Veterans Administration Medical Center (VAMC) and the Intelligent Optics Laboratory (IOL/UD) located on the 5th floor of the University of Dayton College Park Center building. Both testbeds include three laser beacons operating at wavelengths 532 nm, 1064 nm, and 1550 nm and a set of identical optical receiver systems with …

A High Sensitivity, Evanescent Feld Refractometric Sensor Based On Tapered Multimode Fiber Interference, Pengfei Wang, Gilberto Brambilla, Ming Ding, Yuliya Semenova, Qiang Wu, Gerald Farrell

Articles

We propose and experimentally demonstrate an enhanced evanescent field fiber refractometer based on a tapered multimode fiber sandwiched between two single-mode fibers. Experiments show that this fiber sensor offers ultrahigh sensitivity [better than 1900 nm/RIU at a refractive index (RI) of 1.44] for RI measurements within the range of 1.33–1.44 , in agreement with the theoretical predictions. This is the highest value reported to date (to our knowledge) in the literature.

Wireless Energy Transfer, Ryan Sasur

Electrical Engineering

Phones are now an integral component in the daily lives of people. Smartphones give access to movies, internet, and even books. This versatility and increased use can also lead to a shorter battery life. A phone with video viewing capabilities will be a heavy load on the unit’s battery. With phones utilizing 3G and 4G technology, even heavier demands are placed on the battery. As technology improves even further to provide for a larger entertainment experience on the phone, this could also lead to further battery degradation if the current battery situation isn’t addressed. To have a fully operational phone …

Magneto-Dielectric Polymer Nanocomposite Engineered Substrate For Rf And Microwave Antennas, Cesar A. Morales

USF Tampa Graduate Theses and Dissertations

This dissertation presents the first reported systematic investigation on the implementation of multilayer patch antennas over Fe3O4-based polymer nanocomposite (PNC) magneto-dielectric substrates. The PNC substrate is created by the monodispersion of Fe3O4 nanopthesiss, with mean size of 7.5nm, in a polymeric matrix of Polydimethylsiloxane (PDMS).

Recently, magneto-dielectric substrates have been proposed by several researchers as a means for decreasing the size and increasing the bandwidth of planar antennas. Nevertheless, factors such as high loss and diminished control over magnetic and dielectric properties have hindered the optimal performance of antennas. In addition, the incompatibility and elevated complexity prevents integration of conventional …

Theoretical Study Of Beam Transformations By Volume Diffraction, Sergiy V. Mokhov

Electronic Theses and Dissertations

Laser beams can be manipulated by volume diffractive elements in addition to conventional optical elements like mirrors, lenses, and beam splitters. Conventional optical elements can be described by applying the basic laws of reflection and refraction at the surfaces of the elements. Even diffraction by surface gratings utilizes relatively simple mathematics. This is to be contrasted with the volume diffraction, which requires coupled wave theory in the slowly varying envelope approximation (SVEA) to obtain accurate results. Efficient spatially distributed diffraction of laser beams is possible due to the high coherence of laser light, and it occurs at specific resonant Bragg …

Electromagnetic Propagation Anomalies In Waveguiding Structures And Scattering Systems, Alessandro Salandrino

Electronic Theses and Dissertations

The effects related to diffraction and interference are ubiquitous in phenomena involving electromagnetic wave propagation, and are accurately predicted and described within the framework of classical electrodynamics. In the vast majority of the cases the qualitative features of the evolution of a propagating wave can be inferred even without detailed calculations. A field distribution will spread upon propagation, will accumulate phase along the direction of power flow, will exert mechanical forces upon scattering objects in the direction of propagation etc. When such predictions fail, counterintuitive effects and new functionalities can be engineered. In this work a series of exceptional cases …

Ultra High Density Spectral Beam Combining By Thermal Tuning Of Volume Bragg Gratings In Photo-Thermo-Refractive Glass, Derrek Drachenberg

Electronic Theses and Dissertations

High power lasers with diffraction limited beam quality are desired for many applications in defense and manufacturing. A lot of applications require laser beams at the 100 kW power level along with divergence close to the diffraction limit. The figure of merit for a beam used in such applications should be radiance which determines the laser power delivered to a remote target. One of the primary limiting factors is thermal distortion of a laser beam caused by excessive heat generated in the laser media. Combination of multiple laser beams is usually considered as a method to mitigate these limitations. Spectral …

Perceptual Image Quality Of Launch Vehicle Imaging Telescopes, Joshua K. Lentz

Electronic Theses and Dissertations

A large fleet (in the hundreds) of high quality telescopes are used for tracking and imaging of launch vehicles during ascent from Cape Canaveral Air Force Station and Kennedy Space Center. A maintenance tool has been development for use with these telescopes. The tool requires rankings of telescope condition in terms of the ability to generate useful imagery. It is thus a case of ranking telescope conditions on the basis of the perceptual image quality of their imagery. Perceptual image quality metrics that are well-correlated to observer opinions of image quality have been available for several decades. However, these are …

Few-Cycle Pulses Amplification For Attosecond Science Applications Modeling And Experiments, Michael Hemmer

Electronic Theses and Dissertations

The emergence of mode-locked oscillators providing pulses with durations as short as a few electric-field cycles in the near infra-red has paved the way toward electric-field sensitive physics experiments. In addition, the control of the relative phase between the carrier and the pulse envelope, developed in the early 2000’s and rewarded by a Nobel price in 2005, now provides unprecedented control over the pulse behaviour. The amplification of such pulses to the millijoule level has been an on-going task in a few world-class laboratories and has triggered the dawn of attoscience, the science of events happening on an attosecond timescale. …

Audio-To-Optical Conversion And Transmission, Jason Moritz

Electrical Engineering

The purpose of this project is to understand free-space optical transmission of signals in the application of transmitting an audio signal. An audio signal will be taken from the headphone output of a computer and used to modulate a current source driving an LED and a laser diode. The optical signal will then be transmitted through free space as well as two different focal length lenses and converted back to an audio signal to measure any attenuation or gain in the original signal. My experimental results showed that the LED was able to transmit up to 10 dB more power …

Localized Surface Plasmon Resonance Of Single Silver Nanoparticles Studied By Dark-Field Optical Microscopy And Spectroscopy, Wei Cao, Tao Huang, Xiao-Hong Nancy Xu, Hani E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

Localized surface plasmon resonance (LSPR) of Ag nanoparticles (NPs) with different shapes and disk-shaped Ag NP pairs with varying interparticle distance is studied using dark-field optical microscopy and spectroscopy (DFOMS). Disk-, square-, and triangular-shaped Ag NPs were fabricated on indium tin oxide-coated glass substrates by electron beam lithography. The LSPR spectra collected from single Ag NPs within 5×5 arrays using DFOMS exhibited pronounced redshifts as the NP shape changed from disk to square and to triangular. The shape-dependent experimental LSPR spectra are in good agreement with simulations using the discrete dipole approximation model, although there are small deviations in the …

Log-Periodic Microstrip Patch Antenna Miniaturization Using Artificial Magnetic Conductor Surfaces, Ahmad Tariq Almutawa

USF Tampa Graduate Theses and Dissertations

Microstrip patch antennas are attractive for numerous military and commercial applications due to their advantages in terms of low-profile, broadside radiation, lowcost, low-weight and conformability. However, the inherent narrowband performance of patch antennas prohibits their use in systems that demand wideband radiation. To alleviate the issue, an existing approach is to combine multiple patch antennas within a log-periodic array configuration [1]. These log-periodic patch antennas (LPMAs) are capable of providing large bandwidths (>50%) with stable broadside radiation patterns. However, they suffer from electrically large sizes. Therefore, their miniaturization without degrading the bandwidth performance holds promise for extending their use …

Computationally Efficient Digital Backward Propagation For Fiber Nonlinearity Compensation, Likai Zhu

Electronic Theses and Dissertations

The next generation fiber transmission system is limited by fiber nonlinearity. A distributed nonlinearity compensation method, known as Digital Backward Propagation (DBP), is necessary for effective compensation of the joint effect of dispersion and nonlinearity. However, in order for DBP to be accurate, a large number of steps are usually required for long-haul transmission, resulting in a heavy computational load. In real time DBP implementation, the FIR filters can be used for dispersion compensation and account for most of the computation per step. A method of designing a complementary filter pair is proposed. The individual errors in the frequency response …

Characterization Of The Nonlinear Refractive Index Of Carbon Disulfide Over An Extended Spectral And Temporal Range, Marcus Seidel

Electronic Theses and Dissertations

The intensity dependent refractive index change of a medium is frequently described in terms of the product n₂ · I where n₂ is the nonlinear refractive index and I the light intensity. The nonlinear refractive index is often treated as constant which is a reasonable assumption if the light interacts only with bound electrons. In the case of carbon disulfide (CS₂) however, nuclear motions contribute to n₂. These motions occur on the sub picosecond time scale and thus become especially relevant for ultrashort laser pulses. The neat liquid CS₂ is studied because it exhibits a large nonlinear refractive index in …

Low Noise And Low Repetition Rate Semiconductor-Based Mode-Locked Lasers, Dimitrios Mandridis

Electronic Theses and Dissertations

The topic of this dissertation is the development of low repetition rate and low noise semiconductor-based laser sources with a focus on linearly chirped pulse laser sources. In the past decade chirped optical pulses have found a plethora of applications such as photonic analogto-digital conversion, optical coherence tomography, laser ranging, etc. This dissertation analyzes the aforementioned applications of linearly chirped pulses and their technical requirements, as well as the performance of previously demonstrated chirped pulse laser sources. Moreover, the focus is shifted to a specific application of the linearly chirped pulses, timestretched photonic analog-to-digital conversion (TS ADC). The challenges of …

Design, Fabrication, And Testing Of High-Transparency Deep Ultra-Violet Contacts Using Surface Plasmon Coupling In Subwavelength Aluminum Meshes, Clarisse Mazuir

Electronic Theses and Dissertations

The present work aims at enhancing the external quantum efficiencies of ultra-violet (UV) sensitive photodetectors (PDs) and light emitting diodes (LEDs)for any light polarization. Deep UV solid state devices are made out of AlGaN or MgZnO and their performances suffer from the high resistivity of their p-doped regions. They require transparent p-contacts; yet the most commonly used transparent contacts have low transmission in the UV: indium tin oxide (ITO) and nickel-gold (Ni/Au 5/5 nms) transmit less than 50% and 30% respectively at 300 nm. Here we investigate the use of surface plasmons (SPs) to design transparent p-contacts for AlGaN devices …

Guiding Electric Fields For Electroporation Applications, Jose Rey

USF Tampa Graduate Theses and Dissertations

Electroporation is the critical step in an electric field mediated drug or gene delivery protocol. Electroporation based protocols have been successfully demonstrated in cancer clinical trials, however, its impact in other applications is still under investigation. A significant roadblock to long term functioning of implantable biosensors in vivo is the tissue reaction in the form of fibrous encapsulation that results in reduced transport to the sensing element of the biosensor. In vivo gene electroporation has a great potential as a means to modify the transport properties of tissues in the proximity of the sensing element of implantable biosensors.

This dissertation …

Nano-Patterned High-Responsivity Gaas Metal-Semiconductor-Metal Photodetector, Ayman Karar, Chee Leong Tan, Kamal Alameh, Yong Tak Lee

Research outputs 2011

In this paper, we use the finite difference time-domain (FDTD) method to optimize the light absorption of an ultrafast nano-grating plasmonic GaAs metal-semiconductor-metal photodetector (MSM-PD) employing double metal nano-gratings. The geometry of the MSM-PD is theoretically investigated, leading to improved light absorption near the design wavelength of GaAs due to plasmon-assisted electric and magnetic field concentration through a subwavelength aperture. Simulation results show up to 8- and 21-times light absorption enhancement for the single and double nano-grating structure, respectively, in comparison to conventional MSM-PDs. Experimentally, more than 4 times enhancement in photocurrent is demonstrated for a single top nano-grating MSM-PD …

Garnet Multilayer Thin Film Structure With Magnetostatically-Altered And Improved Magnetic Properties Prepared By Rf Magnetron Sputtering, Mohammad Nur-E-Alam, Mikhail Vasiliev, Viacheslav Kotov, Kamal Alameh

Research outputs 2011

We prepare an all-garnet multilayer film structure by sandwiching a magneto-soft garnet material in between two magneto-hard garnet materials with high bismuth substitution levels using RF magnetron sputtering technique and investigate the microstructure and the effects of magnetostatic inter-layer coupling on magnetic properties. Both types of the Bi-substituted magneto-optic garnet materials used possess excellent optical, magnetic and magneto-optical properties suitable for the application in different new and emerging technologies in optics and photonics. Garnet layers of composition type Bi2Dy1Fe4Ga1O12 have strong perpendicular magnetic anisotropy and Bi1.8Lu1.2Fe3.6Al1.4O12 magneto-soft layer features magnetization behavior similar to that of in-plane magnetized films. The all-garnet …

A 1x4 Adaptive Optical Splitter Based On Opto-Vlsi Processor, Haithem Mustafa, Feng Xiao, Kamal Alameh

Research outputs 2011

We propose and experimentally demonstrate a novel high resolution 1×4 adaptive optical power splitter based on the use of an Opto-VLSI processor and a 4-f imaging system with an optimized optical beam waist profile. By uploading optimized multicasting phase holograms onto the software-driven Opto-VLSI processor, an input optical signal is dynamically split into different output fiber ports with user-defined splitting ratios. Experimental results showing dynamic optical splitting over a wavelength range exceeding 50 nm are presented.

Design Of Laser Multi-Beam Generator For Plant Discrimination, Sreten Askraba, Arie Paap, Kamal Alameh, John Rowe

Research outputs 2011

Optimisation of the optical signal from the laser multi-spot beam generator employed in a photonic based real-time plant discrimination sensor for use in selective herbicide spraying systems is presented. The plant detection sensor uses a three-wavelength laser diode module that sequentially emits identically-polarized laser light beams through a common aperture, along one optical path. Each laser beam enters a multi-spot beam generator which produces 15 parallel laser beams over a 240mm span. The intensity of the reflected light from each spot is detected by a high-speed line scan image sensor. Plant discrimination is based on calculating the slope of the …

Photonic Microwave Filter Employing An Opto-Vlsi-Based Adaptive Optical Combiner, Haithem Mustafa, Feng Xiao, Kamal Alameh

Research outputs 2011

A reconfigurable photonic microwave filter structure employing an Opto-VLSI based adaptive optical combiner is proposed and experimentally demonstrated. The Opto-VLSI based adaptive optical combiner is used to combine RF modulated optical signals with a user-defined weight profile to realize a reconfigurable RF photonic filter response. Theoretical simulations are in excellent agreement with the experimental results that demonstrate the concept of the photonic microwave filter structure.

Numerical Modelling Of Interrogation Systems For Optical Fibre Bragg Grating Sensors, Daniel P. Oswald, Steven J. Richardson, Graham Wild

Research outputs 2011

There are a number of interrogation methods that can be used in optical Fibre Bragg Grating (FBG) sensing system. For very high frequency signals interrogating the sensor signal from an FBG is limited to two intensiometric methods, edge filter detection and power detection. In edge filter detection, a broadband light source illuminates an FBG, the reflected spectrum is then passed through a spectral filter. In power detection, a narrowband light source with a wavelength corresponding to the 3dB point of the FBG is filtered by the FBG itself. Both methods convert the spectral shift of the FBG into intensity signals. …

Optical Fibre Communications And Sensing System Experiments For Undergraduate Photonics Laboratories, Graham Wild, Geoffrey Swan

Research outputs 2011

Experiments in photonics tend to be reserved for postgraduate laboratories, where suitable equipment and resources are available. Simple optical fibre experiments may be included in some undergraduate programs, possibly utilising polymer optical fibres with LEDs and phototransistors, or with the use of bulk optical components and glass optical fibre elements. However, real optical fibre communication systems and optical fibre sensing systems utilise more complex devices, such as optical fibre Bragg gratings. With the availability of optical components in the 850nm wavelength range, a variety of practical systems can be realised using industry standard components. We show how to mitigate a …