Electromagnetics and Photonics Commons^™

Machine Learning Based Automation Of Pcb Pdn Design And Optimization, Haran Manoharan

Doctoral Dissertations

The rapid increase in power density and stringent power-integrity requirements in modern System-on-Chip (SoC) platforms have made Power Delivery Network (PDN) design an increasingly complex, multi-stage challenge. Critical decisions must be made both during pre-layout planning, such as stackup configuration, power-plane geometry, and early decoupling capacitor (decap) budgeting, and during post-layout refinements. Traditional heuristic and evolutionary optimization techniques struggle with scalability, require extensive manual iteration, leading to long runtimes and limited adaptability across varying board configurations. To address these challenges, this work proposes a unified reinforcement-learning-driven framework for automated PDN synthesis and decap optimization that spans both pre-layout and post-layout …

Modeling Strategy For Emi Filter And Flyback Transformer, Ruijie He

Doctoral Dissertations

“The switch-mode power supply is key to miniaturizing power adapters. However, the switching nature of the circuit introduces issues in conducted emissions. In a flyback converter, the transformer serves as the path for common mode current flowing from the primary side to the secondary side. Different winding technologies have been invented and implemented to reduce the capacitance between the primary side and the secondary side. But the repeatability of the winding is still poor due to the fluctuations of the winding machine. Thus, the resulting conducted emission has a fluctuation that can lead to failure in the compliance tests. EMI …

Characterization And Modeling Of Esd Events, Risk And Protection, Jianchi Zhou

Doctoral Dissertations

“The ESD (Electrostatic discharge) failures have been raising critical reliability problems in electronic devices design. However, not all the ESD scenarios have been specified by the IEC standard and the characterizations of the ESD risk for different scenarios are essential to evaluate the ESD robustness of the devices in the real word.

The insulation of plastic enclosures provides protection against ESD to the electronic system inside. However, seams between plastic parts are often unavoidable. Different plastic arrangements are constructed to investigate the spark length and current derivatives and to understand the ESD spark behavior for geometries having spark lengths longer …

Theoretical Study Of Magnetic Particles In A Shear Flow Subjected To A Uniform Magnetic Field, Christopher A. Sobecki

Doctoral Dissertations

"Magnetic manipulation of non-spherical magnetic microparticles is important for applications in shape-based and magnetic-based separations such as waste management, disease diagnostics, drug delivery, and mining. Manipulations of magnetic microparticles also include chain formation to assemble compositions for electronics, drug loading designs, and magnetorheological fluids for smart armor, hydraulic brakes, and dampers. In microfluidic devices, separation-formation-effectiveness depends on the shape of the channel, the shear rate, and the magnetic field strength and direction.

Particle separation and chain formation involved highly complex and computational expense-demanding studies in microfluidic devices, magnetic fields, and particle- particle/wall interactions. This research took complex experimental studies and …

Source Reconstruction In Near Field Scanning For Rfi Application, Hosseien Rezaei

Doctoral Dissertations

"This research is divided into three major topics. The first topic, mechanical magnetic field generator for communication in the ULF range, is discussed in the first paper. The second topic, source reconstruction in near field scanning for RFI application, is discussed over the course of two papers. The third topic, analysis of imbalanced 2 or 3 Wire VHF LISN, is discussed in the last two papers.

In the first topic, the possibility to use a mechanical system (a rotating magnet) as a source (generator or antenna combined) of the ULF magnetic field is investigated. Ultralow frequency (ULF) communication systems have …

Emi Characterization For Power Supplies And Machine Learning Based Modeling In Emc/Si, Jiayi He

Doctoral Dissertations

"Signal integrity (SI) and electromagnetic interference (EMI) are essential for consumer electronics and high-speed server applications. It is necessary to do EMI and SI modeling at the design stage. In this research, several modeling approaches for EMI and SI problems are proposed. By using measurement-based modeling method, the mechanism of conducted emissions (CE) on ac to dc power supplies in an LED TV is analyzed. A system-level transient simulation model is built to predict the conducted emission (CE). To characterize the equivalent dipole moment sources in RFI and EMI problems, a dipole source reconstruction method based on machine learning techniques …

Instrumentation, Modeling, And Sound Metamodeling Foundations For Complex Hybrid Systems, Natasha Amelia Jarus

Doctoral Dissertations

Many of our critical infrastructures, from power grids to water distribution networks, are complex hybrid systems that use software to control their non-trivial physical dynamics. These systems must be able to capably serve their purpose, while also being reliable, dependable, safe, secure, and efficient. Representation and analysis of these features requires the creation of several distinct models. These models may encode design goals or be derived from collected instrumentation data, reflecting both how a system ought to operate and how it does operate. It is essential to ensure that all of these models consistently and accurately describe the same system. …

An Emi Characterization And Modeling Study For Consumer Electronics And Integrated Circuits, Chunyu Wu

Doctoral Dissertations

“As internet-of-things (IoT) applications surge, wireless connectivity becomes an essential part of the network. Smart home, one of the most promising application scenarios of IoT, will improve our life quality enormously. However, electromagnetic interference (EMI) to the receiving antenna, either from another electronic product or from a module/an integrated circuit(IC) inside the same wireless device, will degrade the performance of wireless connectivity, thus influencing the user experience. Characterization and modeling of the EMI become increasingly important.

In the first part, an improved method to extract equivalent dipoles from magnitude- only electromagnetic-field data based on the genetic algorithm and back-and-forth iteration …

Multi-Physics-Based Approach To Active Microwave Thermography, Seyed Ali Mirala

Doctoral Dissertations

“The goal of this work is to advance a novel nondestructive testing (NDT) method for controlled, rapid, and effective inspection of a structure through the integration of microwave NDT and thermography, referred to as Active Microwave Thermography (AMT). In AMT, the structure under test is exposed to microwave radiation and the thermal profile of the structure is monitored via a thermal camera in order to obtain desired information regarding the structure. This new technique is applicable across a wide range of NDT needs including detection of voids, delamination, water ingress, debonding, and cracks in numerous structures such as carbon fiber …

System Efficient Esd Design Concept For Soft Failures, Giorgi Maghlakelidze

Doctoral Dissertations

"This research covers the topic of developing a systematic methodology of studying electrostatic discharge (ESD)-induced soft failures. ESD-induced soft failures (SF) are non-destructive disruptions of the functionality of an electronic system. The soft failure robustness of a USB3 Gen 1 interface is investigated, modeled, and improved. The injection is performed directly using transmission line pulser (TLP) with varying: pulse width, amplitude, polarity. Characterization provides data for failure thresholds and a SPICE circuit model that describes the transient voltage and current at the victim. Using the injected current, the likelihood of a SF is predicted. ESD protection by transient voltage suppressor …

2x-Thru, 1x-Reflection, And Thru-Line De-Embedding: Theory, Sensitivity Analysis, And Error Corrections, Bichen Chen

Doctoral Dissertations

"Due to the simplicity of design and measurement, as well as the accuracy of results, the 2X-Thru de-embedding (2XTD), 1X-Reflection de-embedding (1XRD), and Thru-Line de-embedding (TLD) have been replaced the traditional de-embedding algorithms, such as TRL and SOLT. In this dissertation, theory of 2ⁿ-port 2XTD, 1XRD, and TLD are completely derived first. The self-error reduction schemes is introduced to mitigate the de-embedding errors due to non-ideal manufacturing effects of non-zero mode conversion terms, as well as the asymmetric, and manufacturing variations. The validations are performed on both theory and self-error reduction through simulation and measurements cases. The 2X-Thru …

Passive Harmonic Generation At Spring Contacts, Sen Yang

Doctoral Dissertations

"In the first paper, the RF passive harmonic generation phenomenon on the spring contact is studied. A spring contact harmonic generation measurement system is developed. The factors that may have an impact on the spring contact harmonic generation, such as contact material, contact force, and contact resistance are characterized by the measurement system. The gold-to-gold contact is found to be much superior to the stainless-steel contacts. It is also found that the passive nonlinearity at the spring contact is the semiconductor-like junction formed by the surface oxide film.

In the second paper, we show that the maximum E-field coupling occurs …

Non-Invasive Microwave And Millimeter Wave Reflectometry And Imaging For Human Skin Diagnosis And Materials Characterization, Yuan Gao

Doctoral Dissertations

"Microwave and millimeter wave reflectometry and synthetic aperture radar (SAR) imaging techniques have been successfully applied in many applications, such as nondestructive testing and evaluation (NDT&E), security inspection and medical diagnosis. In this dissertation, the feasibility of using microwave and millimeter reflectometry and SAR imaging for burn diagnosis is investigated through both simulations and measurements, with promising results. To correctly model the interaction between electromagnetic waves and skin, the proper knowledge of the complex permittivity of healthy skin is critically important. To this end, the common used measurement methods for in vivo skin complex permittivity are reviewed and analyzed in …

Characterization And Modeling Of Esd Events And Near-Field Scanning Calibration Structures, Shubhankar Kashinath Marathe

Doctoral Dissertations

"This research is divided into three papers that cover, two major topics. The first topic, system-level electrostatic discharge (ESD), is discussed over the course of two papers. The second topic, a calibration structure for near-field scanning probe calibration application, is discussed in the last paper. In the first paper, software-assisted detection methods are proposed for secondary ESD discharges. The measured waveforms are analyzed with respect to waveform parameters, such as the vertical threshold of the rising edge, the derivative of the current waveform, and total charge delivered. These parameters enable automatic detection of secondary ESD while monitoring the discharge waveform …

Modeling Strategies For Estimating And Suppressing Electromagnetic Interference And Improving Power Integrity, Tamar Makharashvili

Doctoral Dissertations

"Decoupling capacitors are used to suppress high-frequency noise in power distribution networks. The inductance associated with a mounted decoupling capacitor can vary by 26% depending on characteristics of the printed circuit board. Here, simple and accurate inductance models of 2- and 8-terminal capacitors including connections to the power and return plane are developed. Circuit models of the capacitors and layout are created using the partial equivalent element circuit method which provide options for circuit-level simulations as well as analytic estimation of inductance. The circuit solution matches results from the full-wave simulation model within 9% for the 8-terminal capacitor and within …

Electromagnetic Wave-Matter Interactions In Complex Opto-Electronic Materials And Devices, Raj Kumar Vinnakota

Doctoral Dissertations

This dissertation explores the fundamentals of light-matter interaction towards applications in the field of Opto-electronic and plasmonic devices. In its core, this dissertation attempts and succeeds in the the modeling of light-matter interactions, which is of high importance for better understanding the rich physics underlying the dynamics of electromagnetic field interactions with charged particles. Here, we have developed a self-consistent multi-physics model of electromagnetism, semiconductor physics and thermal effects which can be readily applied to the field of plasmotronics and Selective Laser Melting (SLM). Plasmotronics; a sub-field of photonics has experienced a renaissance in recent years by providing a large …

Effective Magnetic And Electric Response Of Composite Materials, Mona Hassan Alsaleh

Doctoral Dissertations

Metamaterials (MMs) are nanocomposite materials consisting of metal-dielectric resonators much smaller in size than the wavelength of the incident light. Common examples of metamaterials are based on split ring resonators (SRRs), parallel wires or strips and fishnet structures. These types of materials are designed and fabricated in order to provide unique optical responses to the incident electromagnetic radiation that are not available in naturally existing materials. The MMs can exhibit unusual properties such as strong magnetism at terahertz (THz) and optical frequencies. Additionally, negative index materials (NIMs) can provide negative index of refraction which can be used in many applications …

Smart Rocks For Bridge Scour Monitoring -- Design And Localization Using Electromagnetic Techniques And Embedded Orientation Sensors, Andro Radchenko

Doctoral Dissertations

"River bridge scour is an erosion process in which flowing water removes sediment materials (such as sand, rocks) from a bridge foundation, river beds and banks. As a result, the level of the river bed near a bridge pier is lowering such that the bridge foundation stability can be compromised, and the bridge can collapse. The scour is a dynamic process, which can accelerate rapidly during a flood event. Thus, regular monitoring of the scour progress is necessary to be performed at most river bridges. Present techniques are usually expensive, require large man/hour efforts, and often lack the real-time monitoring …

Development Of Active Microwave Thermography For Structural Health Monitoring, Ali Foudazi

Doctoral Dissertations

"Active Microwave Thermography (AMT) is an integrated nondestructive testing and evaluation (NDT&E) method that incorporates aspects of microwave NDT and thermography techniques. AMT uses a microwave excitation to generate heat and the surface thermal profile of the material or structure under test is subsequently measured using a thermal camera (or IR camera). Utilizing a microwave heat excitation provides advantages over traditional thermal excitations (heat lamps, etc.) including the potential for non-contact, selective and focused heating. During an AMT inspection, two heating mechanisms are possible, referred to as dielectric and induction heating. Dielectric heating occurs as a result of the interaction …

Modal Based Bga Modeling In High-Speed Package, Shuai Jin

Doctoral Dissertations

"In the Section 1, the improved "Root-Omega" method for extracting dielectric properties from fabricated multilayer printed circuit boards is proposed. Based on the electrical properties of fabricated transmission lines, the improved "Root-Omega" method applied to cases with smooth and rough conductors is validated using simulations. Error sensitivity analysis is performed to demonstrate the potential errors in the original "Root-Omega" procedure and the error sensitivity is significantly reduced by the proposed improvements.

In the Section 2, a fast modal-based approach is developed to accurately and efficiently capture the proximity effect. Image theory is also applied in the proposed approach to reduce …

Experimental Performance Evaluation And Design Of Schemes For Passive Rfid Network, Shadi Ebrahimi-Asl

Doctoral Dissertations

"Passive Radio Frequency Identification (RFID) is a short range technology for transferring information. The main advantage of passive RFID systems over active communication systems is the battery-less operation at the client sides. However, there are two major challenges that limit the widespread adaptation of passive RFID systems: short communication range and low read rate in dense deployments. This dissertation addresses these issues by studying the root causes and develops solutions for them.

In this dissertation, understanding the backscattering behavior of antennas and also the mutual coupling interactions among them are found to be the root causes of the two above-mentioned …

Electromagnetic Compatibility In Power Inverter Design, Natalia Bondarenko

Doctoral Dissertations

"Power inverter systems generate significant electromagnetic emissions. Methods were studied to model these systems and to reduce their emissions. Three topics are presented in this dissertation.

Methods were developed to obtain simple SPICE models for complex systems which relate circuit components to physical geometry within the system. These models were derived using measurements or using partial element equivalent circuit (PEEC) and model size reduction techniques developed in this dissertation. Methods were proposed for developing a measurement-based model and were applied to a real power inverter/motor system. The model was used to identify system geometries responsible for critical resonances and to …

Pulsed Inductive Plasma Studies By Spectroscopy And Internal Probe Methods, Warner C. Meeks

Doctoral Dissertations

The broad effort of the Missouri Plasmoid Experiment is to elucidate the energy conversion processes in a pulsed inductive discharge due to the presence of plasma. The test article is a 440 to 490 kHz theta-pinch (or solenoidal) geometry coil with a stored energy of around 80 joules. In this work experimental hydrogen, helium, argon and xenon data at back-fill pressures of 10 to 100 mTorr (1.3 to 133.3 Pa) are obtained and interpreted. Spectral and internal probe studies were performed on MPX Mk.I and Mk.II devices, respectively. IR spectra were acquired in the Mk.I device for argon and xenon. …

Near-Field Scanning Study For Radio Frequency Interference Estimation, Jingnan Pan

Doctoral Dissertations

"This dissertation discusses the novel techniques using near-fields scanning to do radio frequency interference (RFI) estimation. As the electronic products are becoming more and more complicated, the radio frequency (RF) receiver in the system is very likely interfered by multiple noise sources simultaneously. A method is proposed to identify the interference from different noise sources separately, even when they are radiating at the same time. This method is very helpful for engineers to identify the contribution of the coupling from different sources and further solve the electromagnetic interference issues efficiently. On the other hand, the equivalent dipole-moment models and a …

Quantum Levitation Using Metamaterials, Venkatesh K. Pappakrishnan

Doctoral Dissertations

The emergence of an attractive vacuum force (Casimir force) between two purely dielectric materials can lead to an increase in the friction and the stiction effects in nanoscale devices, resulting in degradation or decreased performance. Thus, it is of high practical importance that the conditions for the reversal of the Casimir force from attractive to repulsive are identified. Although the repulsive Casimir force has been considered for high dielectric materials as an intermediate (between the plates) medium, so far no realistic system has been proposed that can demonstrate quantum levitation with air/vacuum as a host medium. Since air is the …

On Electromagnetic And Quantum Invisibility, Pattabhiraju Chowdary Mundru

Doctoral Dissertations

The principle objective of this dissertation is to investigate the fundamental properties of electromagnetic wave interactions with artificially fabricated materials i.e., metamaterials for application in advanced stealth technology called electromagnetic cloaking. The main goal is to theoretically design a metamaterial shell around an object that completely eliminates the dipolar and higher order multipolar scattering, thus making the object invisible.

In this context, we developed a quasi-effective medium theory that determines the optical properties of multi-layered-composites beyond the quasi-static limit. The proposed theory exactly reproduces the far-field scattering/extinction cross sections through an iterative process in which mode-dependent quasi-effective impedances of the …

Numerical Simulation Of Nanopulse Penetration Of Biological Matter Using The Adi-Fdtd Method, Fei Zhu

Doctoral Dissertations

Nanopulses are ultra-wide-band (UWB) electromagnetic pulses with pulse duration of only a few nanoseconds and electric field amplitudes greater than 105 V/m. They have been widely used in the development of new technologies in the field of medicine. Therefore, the study of the nanopulse bioeffects is important to ensure the appropriate application with nanopulses in biomedical and biotechnological settings. The conventional finite-difference time-domain (FDTD) method for solving Maxwell's equations has been proven to be an effective method to solve the problems related to electromagnetism. However, its application is restricted by the Courant, Friedrichs, and Lewy (CFL) stability condition that confines …

Nonlinear Dynamical Analysis Of Brain Electrical Activity Due To Exposure To Weak Environmentally Relevant Electromagnetic Fields, Erik Alfonso Nilsen

Doctoral Dissertations

The reports dealing with the effects of weak electromagnetic fields (EMFs) on brain electrical activity have been inconsistent. We suspected that the use of linear models and their associated methods accounted for some of the variability, and we explored the issue by using a novel approach to study the effects of EMFs on the electroencephalogram (EEG) from rabbits and humans. The EEG was embedded in phase space and local recurrence plots were calculated and quantified to permit comparisons between exposed and control epochs from individual subjects. Statistically significant alterations in brain activity were observed in each subject when exposed to …

Cad Model Extraction Of Pcb Signal Discontinuity Using A Circuit Extraction Approach Based On Mixed-Potential Integral Equation Formulation, Shaofeng Luan

Doctoral Dissertations

"In high-speed digital design, signal via transitions on printed circuit boards (PCBs) are becoming an important signal integrity issue. Efficient and accurate models for via transitions are necessary to analyze high bit-rate digital circuit system. The circuit extraction approach based on a mixed-potential integral equation formulation (CEMPIE) is an extension of the Partial Element Equivalent Circuit approach (PEEC) to general multi-layered media. CEMPIE was further developed to include the horizontal current components on the vertical surface and extended to model the discontinuities on multilayer PCBs. A procedure of building SPICE models for signal via transitions between printed circuit board layers …