Electromagnetics and Photonics Commons^™

Configuration Studies Of Electrostatic And Magnetostatic Active Space Radiation Shielding, Trac K. Nguyen

Electrical & Computer Engineering Theses & Dissertations

Developing successful and optimal solutions for mitigating the hazards of radiation in deep space is critical for the success of deep-space long duration explorations, including mission to the Moon, Mars and beyond. A recent report (Tripathi et al., 2008) had explored the feasibility of using electrostatic shielding in conjunction with state-of-the-art materials shielding technologies.

In this thesis research, we study the active electrostatic shielding strategy and examine a hybrid configuration that utilizes both electrostatic and magnetostatic fields. The main advantages of this system are shown to be: (i) much lower magnetic fields that could be below the thresholds set for …

Modeling, Identification, Validation And Control Of A Hybrid Maglev Ball System, Ahmed Elhussein E. Mekky

Mechanical & Aerospace Engineering Theses & Dissertations

In this thesis, the electrodynamics of a single axis hybrid electromagnetic suspension Maglev system was modeled and validated by applying it to a single axis hybrid maglev ball experiment. By exploring its linearized model, it was shown that the single axis hybrid Maglev ball has inherently unstable dynamics. Three control scenarios were explored based on the linearized model; (1) Proportional, Deferential (PD) control, (2) Proportional, Deferential, Integral (PID) and (3) PID controller with pre-filtering. This thesis has shown that a PID controller with a pre-filtering technique can stabilize such a system and provide a well-controlled response.

A parametric system identification …

Application Of Chebyshev Formalism To Identify Nonlinear Magnetic Field Components In Beam Transport System, Michael Spata

Physics Theses & Dissertations

An experiment was conducted at Jefferson Lab's Continuous Electron Beam Accelerator Facility to develop a beam-based technique for characterizing the extent of the nonlinearity of the magnetic fields of a beam transport system. Horizontally and vertically oriented pairs of air-core kicker magnets were simultaneously driven at two different frequencies to provide a time-dependent transverse modulation of the beam orbit relative to the unperturbed reference orbit. Fourier decomposition of the position data at eight different points along the beamline was then used to measure the amplitude of these frequencies. For a purely linear transport system one expects to find solely the …

Compensation Techniques In Accelerator Physics, Hisham Kamal Sayed

Physics Theses & Dissertations

Accelerator physics is one of the most diverse multidisciplinary fields of physics, wherein the dynamics of particle beams is studied. It takes more than the understanding of basic electromagnetic interactions to be able to predict the beam dynamics, and to be able to develop new techniques to produce, maintain and deliver high quality beams for different applications. In this work, some basic theory regarding particle beam dynamics in accelerators will be presented. This basic theory, along with applying state of the art techniques in beam dynamics will be used in this dissertation to study and solve accelerator physics problems. Two …

Localized Surface Plasmon Resonance Of Single Silver Nanoparticles Studied By Dark-Field Optical Microscopy And Spectroscopy, Wei Cao, Tao Huang, Xiao-Hong Nancy Xu, Hani E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

Localized surface plasmon resonance (LSPR) of Ag nanoparticles (NPs) with different shapes and disk-shaped Ag NP pairs with varying interparticle distance is studied using dark-field optical microscopy and spectroscopy (DFOMS). Disk-, square-, and triangular-shaped Ag NPs were fabricated on indium tin oxide-coated glass substrates by electron beam lithography. The LSPR spectra collected from single Ag NPs within 5×5 arrays using DFOMS exhibited pronounced redshifts as the NP shape changed from disk to square and to triangular. The shape-dependent experimental LSPR spectra are in good agreement with simulations using the discrete dipole approximation model, although there are small deviations in the …

Nuclear Electromagnetic Currents In Chiral Effective Field Theory, Saori Pastore

Physics Theses & Dissertations

A nucleon-nucleon potential and consistent nuclear electromagnetic currents are derived in chiral effective field theory retaining pions and nucleons as explicit degrees of freedom. The calculation of the potential is carried out up to next-to-next-to leading order (N²LO), while the currents include up to N³LO corrections. The potential at N² LO and currents at N³LO consist of two-pion-exchange and contact contributions. The currents are then utilized to study a number of low-energy electromagnetic observables induced by magnetic dipole transitions, such as the deuteron and trinucleon magnetic moments and the np, nd and n …

Focusing Electromagnetic Radiation In Dielectric Media, Mark A. Migliaccio Jr.

Electrical & Computer Engineering Theses & Dissertations

Bioelectrics and microwave imaging requires an ultra-wideband (UWB) antenna to deliver intense, short electromagnetic pulses into biological targets for the purpose of therapy and imaging. Two antennas with different focal distances, predicted by a two­ dimensional model, have been designed for focusing electromagnetic radiation in the near field.

Focusing is achieved through the use of prolate spheroidal reflector antennas with a conical wave launcher submerged in water. For an ultra-wideband feed signal, with a rise time of 200 picoseconds, the maximum electric field was found to be close to the edge of the reflector, a result that differs from the …

Aerodynamic Analysis Of An Urban Magnetic Levitation Vehicle, John Matthew Wells

Mechanical & Aerospace Engineering Theses & Dissertations

This thesis will detail the aerodynamic qualities of a magnetic levitation concept vehicle designed to be installed on Old Dominion University's campus. The vehicle is representative of a class of small, low-speed Maglev systems commonly referred to as Urban Maglev. A 1:12 scale model underwent testing in Old Dominion's low speed wind tunnel. Force and moment coefficients were measured over a wide range of yaw angles. Results give insight into crosswind effects and how these forces affect vehicle dynamics. An analysis of this type is important in understanding the ride quality and safety of the system. Force Coefficients range from …

Dynamic Interaction Of Elevated Guideway With Uncontrolled Maglev Vehicles, Sumanth Reddy Velma

Mechanical & Aerospace Engineering Theses & Dissertations

A flexible guideway on an elevated foundation is a key to affordable maglev urban transit. The flexible guideway can undergo significant dynamic motion, either when a vehicle solely relies on an open-loop control system or when a vehicle equipped with feedback control system experiences failure, due to fluctuating magnetic forces between the vehicle and the guideway. In an attempt to understand the effect of the uncontrolled vehicle on the structural response of the guideway, its dynamic interaction with maglev vehicles is investigated under various operating conditions. To this end, two vehicle models using Electrodynamic suspension (EDS) and Electromagnetic suspension (EMS) …

Stability Analysis, Modeling, Simulation And Experimental Testing Of An Ems Maglev System With Structural Flexibility, Aravind M. Hanasoge

Mechanical & Aerospace Engineering Theses & Dissertations

Vehicle-guideway interaction studies of Magnetically Levitated (Maglev) vehicles indicate that structural flexibility can adversely affect the overall stability and performance of such systems. This is one of the reasons why guideways are generally made very rigid. This in turn leads to increased cost of the overall system since guideway construction forms a significant portion of the overall cost. In this dissertation, the influence of structural flexibility on the stability of Electromagnetic Suspension (EMS) Maglev systems is studied. It is shown how inherently unstable and flexible structure EMS Maglev systems can achieve guaranteed stability by using collocated actuators and sensors, along …

Analysis Of Possible Use Of Identification Technologies In Disassembly, Vukica Jovanović, Sreten Filipović, Gordana Ostojić, Stevan Stankovski, Milovan Lazarević

Engineering Technology Faculty Publications

The barcodes and Radio Frequency Identification tags that are being used during manufacturing, assembly, warehousing, and distribution could also be reused at the end of the product lifecycle for an identification of the correct disassembly process that would result in recycling of its components. The barcodes or RFID tags can be helpful in identifying objects in terms of sustainable development, regarding disassembly, recycling and reuse. In this paper, the analysis of the current applications of RFID Technology in the final phase of the product lifecycle will be presented. The simulation of the disassembly process supported by both barcode and RFID-enabled …

Development And Validation Of A Dynamic Model Of The Maglev Transportation System At Old Dominion University, Ajinkya V. Deodhar

Mechanical & Aerospace Engineering Theses & Dissertations

A dynamic model for the vehicle-guideway coupled with a controller is developed using dynamic modelling software, MADYMO. The fundamental characteristics of the vehicle are obtained from detailed FE analysis in NASTRAN. The vehicle is then converted into a 21-degree-of-freedom rigid body system with 12 FE magnets. A two span concrete guideway of 54 meters in length is modelled using 3D solid Hex8 elements. The air gap is modelled as a penetration of the magnets in the guideway. The PD controller aims at achieving constant penetration (i.e. the air gap) of all magnets in the guideway, throughout the simulation. This PD …

Temporal Calcium Response Of Jurkat Cells To Nanosecond Pulsed Electric Fields, Shaka Shakar Scarlett

Electrical & Computer Engineering Theses & Dissertations

Nanosecond pulsed electric fields (nsPEF) of megavolt per meter field strengths can interact with subcellular structures [1] and consequently trigger a variety of biological events. The exposure can induce apoptosis, as well as an array of differential "sub-lethal effects." One of the most sensitive and immediate responses is the increase in intracellular calcium concentration in pulsed cells [2], [3][4].We investigated the response of Jurkat cells (a human leukemic cell line) to nsPEFs of 60 ns duration and field strengths from 25 tol00 kV/cm. The development of the induced calcium response in individual cells was studied by spinning-disc confocal microscopy with …

Using Rfid Technology In Collaborative Design Of The Assembly Systems, Stevan Stankovski, Gordana Ostojić, Vukica Jovanović, Branislav Stevanov

Engineering Technology Faculty Publications

Modern production conditions require the application of the concept of distributing production. This approach means coordinative production in a number of small and middle size companies. Multiplex products, consisting of a number of parts, components, and modules are assembled in one function unit in one company, but they may not be manufactured in one place. Huge factory and production complex, which existed in our country, comprised all phases of product lifecycle, from the development of a concept solution to the assembly. Technology of product manufacturing, resource logistics, quality control, product testing and verification of product function characteristics all represented activities …

Rfid Technology Use In Assembly And Disassembly Processes, Gordana Ostojić, Milovan Lazarević, Vukica Jovanović, Stevan Stankovski, Ilija Ćosić

Engineering Technology Faculty Publications

Modern production conditions demand the application of the concept of distributed production. Today companies are specialized for partial technology processes. Hundreds, sometimes even thousands, of collaborative processes depend on workers’ interaction and communication in product assembly and disassembly phases. RFID technologies can be really helpful in identifying objects in terms of sustainable development, regarding disassembly, recycling and reuse. In this paper we presented VCDE system architecture and the realization method of RFID technology as well as the data acquisition using RFID technology during the product lifecycle from the design process, production, assembly, usage, and an special example is given regard- …

Robustness And Control Of A Magnetically Levitated Transportation System, Grzegorz Oleszczuk

Mechanical & Aerospace Engineering Theses & Dissertations

Electromagnetic suspension of Magnetic Levitation Vehicles (Maglev) has been studied for many years as an alternative to wheel-on rail transportation systems. In this work, design and implementation of control systems for a Maglev laboratory experiment and a Maglev vehicle under development at Old Dominion University are described. Both plants are modeled and simulated with consideration of issues associated with system non-linearity, structural flexibility and electromagnetic force modeling. Discussion concerning different control strategies, namely centralized and decentralized approaches are compared and contrasted in this work. Different types of electromagnetic non-linearities are considered and described to establish a convenient method for modeling …

Electromagnetic Propagation Prediction Inside Aircraft Cabins, Genevieve Hankins

Electrical & Computer Engineering Theses & Dissertations

Electromagnetic propagation models for signal strength prediction within aircraft cabins are essential for evaluating and designing a wireless communication system to be implemented onboard aircraft. There are many commercially available software packages for predicting wireless system performance in conventional indoor environments. It is of interest to examine the available software to determine if the aircraft's electromagnetic environment (EME) can be modeled successfully without developing an aircraft specific prediction tool. EnterprisePlanner ®, a registered product of Wireless Valley Communications, Incorporated, was selected for the present effort. The performance of the prediction model was evaluated through a comparison with field measurements taken …

Electromagnetic Propagation Prediction Inside Aircraft Cabins, Genevieve Hankins

Electrical & Computer Engineering Theses & Dissertations

Electromagnetic propagation models for signal strength prediction within aircraft cabins are essential for evaluating and designing a wireless communication system to be implemented onboard aircraft. There are many commercially available software packages for predicting wireless system performance in conventional indoor environments. It is of interest to examine the available software to determine if the aircraft's electromagnetic environment (EME) can be modeled successfully without developing an aircraft specific prediction tool. EnterprisePlanner®, a registered product of Wireless Valley Communications, Incorporated, was selected for the present effort. The performance of the prediction model was evaluated through a comparison with field measurements taken on …

Electromagnetic Wave Propagation Prediction For Wireless Networks Inside Boeing Fuselages, Mennatoallah Youssef

Electrical & Computer Engineering Theses & Dissertations

Commercial grade software is intended for electromagnetic predictions within office buildings; it was used to develop models to analyze propagation inside airplane fuselages. This study shows that Wireless XGTD and Insite software can accurately predict power propagation within airplane fuselages. Current work uses fuselage models, which contain additional internal components. A comparison was made between empty and full fuselage to examine the effects of internal components. Two propagation model types [Fast 3D and Full 3D] were also compared for accuracy to experimental study. It was concluded that completed fuselages are suggested for further simulation study as well as that the …

Investigation Of The Superconducting Properties Of Niobium Radio-Frequency Cavities, Gianluigi Ciovati

Physics Theses & Dissertations

Radio-frequency (rf) superconducting cavities are widely used to increase the energy of a charged particle beam in particle accelerators. The maximum gradients of cavities made of bulk niobium have constantly improved over the last ten years and they are approaching the theoretical limit of the material. Nevertheless, rf tests of niobium cavities are still showing some "anomalous" losses (so-called "Q-drop"), characterized by a marked increase of the surface resistance at high rf fields, in absence of field emission. A low temperature "in-situ" baking under ultra-high vacuum has been successfully applied by several laboratories to reduce those losses and …

Design And Implementation Of One And Two-Degree-Of-Freedom Magnetic Suspension And Balance Systems, Mark W. Adams

Electrical & Computer Engineering Theses & Dissertations

The main objectives of this research were to design and implement one and two-degree-of-freedom (1 DOF and 2-DOF) magnetic levitation systems to levitate permanent magnet cores contained in PVC pipes, 8.4 cm and 76.2 cm in length, respectively. This project used the components of a Magnetic Suspension and Balance System (MSBS) that is being built to provide obstruction free positioning of test models in six degrees of freedom (6-DOF) inside the Princeton University/Office of Naval Research High Reynolds Number Test Facility (HRTF). The HRTF, a specialized wind tunnel designed to simulate undersea conditions by creating a low-speed, 3500 PSI air …

Modeling And Simulation Of Photonic Crystal Fibers Using Finite Difference Frequency Domain Method, Md. Khalid Ikram

Electrical & Computer Engineering Theses & Dissertations

Photonic crystal fibers (PCFs) allow guiding light in low-index core. These fibers exhibit properties such as single-mode operation in broad wavelength region. The mode shape and group velocity dispersion can be controlled by designing the microstructures of the cladding. In order to study these properties, a fast, efficient, and highly accurate numerical modeling method is required.

A full-vectorial finite-difference frequency-domain (FDFD) method is implemented. The modal properties of conventional step index fiber and index-guiding PCF are analyzed using this modeling technique. Compared to plane wave expansion and biorthogonal basis methods, FDFD is found to be simple, reliable, and efficient. PCFs …

Fuzzy Modeling Of Electromagnetic Emissions From Portable Electronic Devices Onboard Commercial Aircraft, Madiha Jamil Jafri

Electrical & Computer Engineering Theses & Dissertations

The use of Portable Electronic Devices (PEDs) is prohibited during take-off and landing of an aircraft because PEDs may emit signals that can interfere with the aircraft's navigation and communication systems. The electromagnetic interference (EMI) on the aircraft's electronics due to PEDs emissions is examined for Boeing 737 and 747 aircraft. This work, funded by the NASA Graduate Researchers Program, uses Interference Path Loss (IPL) data, collected by researchers from NASA Langley Research Center, Eagles Wings Inc. and United Airlines on several out-of-service United B737 and B747 airplanes.

B737 and B747 IPL data has been analyzed using a graphical analysis …

Photonic Band Gap Analysis Using Finite-Difference Frequency-Domain Method, Shangping Guo, Feng Wu, Sacharia Albin

Electrical & Computer Engineering Faculty Publications

A finite-difference frequency-domain (FDFD) method is applied for photonic band gap calculations. The Maxwell’s equations under generalized coordinates are solved for both orthogonal and non-orthogonal lattice geometries. Complete and accurate band gap information is obtained by using this FDFD approach. Numerical results for 2D TE/TM modes in square and triangular lattices are in excellent agreements with results from plane wave method (PWM). The accuracy, convergence and computation time of this method are also discussed.

Loss And Dispersion Analysis Of Microstructured Fibers By Finite-Difference Method, Shangping Guo, Feng Wu, Sacharia Albin, Hsiang Tai, Robert S. Rogowski

Electrical & Computer Engineering Faculty Publications

The dispersion and loss in microstructured fibers are studied using a full-vectorial compact-2D finite-difference method in frequency-domain. This method solves a standard eigen-value problem from the Maxwell’s equations directly and obtains complex propagation constants of the modes using anisotropic perfectly matched layers. A dielectric constant averaging technique using Ampere’s law across the curved media interface is presented. Both the real and the imaginary parts of the complex propagation constant can be obtained with a high accuracy and fast convergence. Material loss, dispersion and spurious modes are also discussed.

Photonic Crystals: Modeling And Simulation, Shangping Guo

Electrical & Computer Engineering Theses & Dissertations

Photonic crystals are periodic electromagnetic media in optical wavelength scale. They possess photonic band gaps (PBGs) that inhibit the existence of light within the crystals in certain wavelength range. Such band gaps produce many interesting optical phenomena. In this dissertation, the frequency (plane wave method, PWM) and time domain (finite difference time domain method, FDTD) methods are developed for their modeling and simulation.

The theory and algorithm of plane wave method are studied in detail and implemented in a unique and efficient approach. PWM is used to obtain the gap and mode information of ideal and defective photonic crystals. Several …

Numerical Techniques For Excitation And Analysis Of Defect Modes In Photonic Crystals, Shangping Guo, Sacharia Albin

Electrical & Computer Engineering Faculty Publications

Two numerical techniques for analysis of defect modes in photonic crystals are presented. Based on the finite-difference time-domain method (FDTD), we use plane wave incidences and point sources for excitation and analysis. Using a total-field/scattered-field scheme, an ideal plane wave incident at different angles is implemented; defect modes are selectively excited and mode symmetries are probed. All modes can be excited by an incident plane wave along a non-symmetric direction of the crystal. Degenerate modes can also be differentiated using this method. A proper arrangement of point sources with positive and negative amplitudes in the cavity flexibly excites any chosen …

Analysis Of Error Recovery Effects On Digital Flight Control Systems, Arturo Tejada Ruiz

Electrical & Computer Engineering Theses & Dissertations

Life-critical, real-time applications like flight-by-wire aircraft, rely on closed-loop digital control systems and fault-tolerant computer systems to reliably achieve the desired operation. The computer systems, however, may be affected by random hardware/software faults induced mainly by environmental conditions such as high intensity radiated fields (HIRF) and lightning. These harsh electromagnetic environments are known to induce common­ mode faults (CMF) in aircraft electronic systems, which disrupt fault-tolerant provisions and possibly affect the operation of the digital control system. Current flight-by-wire aircraft have computer systems that can neither detect CMF nor recover from them. New systems are under investigation that can recover …

A Study Of Radiofrequency Effects On Gene Expression, Elizabeth A. Coln

Electrical & Computer Engineering Theses & Dissertations

Numerous studies have been completed over the past several years to look at the non-thermal effects of low-level radiofrequency exposure on biological systems. These studies were done to determine if exposure to radiofrequency fields are safe, or if they may lead to health problems or changes to any of the biological processes continually occurring within the human body. Responses measured include stress responses (I), gene expression (2), cell proliferation (3), cell morphology (4), and changes in DNA (5).

Dispersion is the most common model for explaining the electric behavior of biomaterials. It refers to the corresponding frequency domain concept of …

Acceleration Element For Femtosecond Electron Pulse Compression, Bao-Liang Qian, Hani E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

An acceleration element is proposed for compressing the electron pulse duration in a femtosecond photoelectron gun. The element is a compact metal cavity with curved-shaped walls. An external voltage is applied to the cavity where a special electric field forms in such a way that the slow electrons in the electron pulse front are accelerated more than the fast electrons, and consequently the electron pulse duration will be compressed. The distribution of the electric field inside the acceleration cavity is analyzed for the geometry of the cavity. The electron dynamics in this acceleration cavity is also investigated numerically. Numerical results …