Electromagnetics and Photonics Commons^™

Measuring The Reflection Matrix Of A Rough Surface, Kenneth W. Burgi, Michael A. Marciniak, Mark E. Oxley, Stephen E. Nauyoks

Faculty Publications

Phase modulation methods for imaging around corners with reflectively scattered light required illumination of the occluded scene with a light source either in the scene or with direct line of sight to the scene. The RM (reflection matrix) allows control and refocusing of light after reflection, which could provide a means of illuminating an occluded scene without access or line of sight. Two optical arrangements, one focal-plane, the other an imaging system, were used to measure the RM of five different rough-surface reflectors. Intensity enhancement values of up to 24 were achieved. Surface roughness, correlation length, and slope were examined …

Comparing Multiple Turbulence Restoration Algorithms Performance On Noisy Anisoplanatic Imagery, Michael Armand Rucci, Russell C. Hardie, Alexander J. Dapore

Electrical and Computer Engineering Faculty Publications

In this paper, we compare the performance of multiple turbulence mitigation algorithms to restore imagery degraded by atmospheric turbulence and camera noise. In order to quantify and compare algorithm performance, imaging scenes were simulated by applying noise and varying levels of turbulence. For the simulation, a Monte-Carlo wave optics approach is used to simulate the spatially and temporally varying turbulence in an image sequence. A Poisson-Gaussian noise mixture model is then used to add noise to the observed turbulence image set. These degraded image sets are processed with three separate restoration algorithms: Lucky Look imaging, bispectral speckle imaging, and a …

On The Simulation And Mitigation Of Anisoplanatic Optical Turbulence For Long Range Imaging, Russell C. Hardie, Daniel A. Lemaster

Electrical and Computer Engineering Faculty Publications

We describe a numerical wave propagation method for simulating long range imaging of an extended scene under anisoplanatic conditions. Our approach computes an array of point spread functions (PSFs) for a 2D grid on the object plane. The PSFs are then used in a spatially varying weighted sum operation, with an ideal image, to produce a simulated image with realistic optical turbulence degradation. To validate the simulation we compare simulated outputs with the theoretical anisoplanatic tilt correlation and differential tilt variance. This is in addition to comparing the long- and short-exposure PSFs, and isoplanatic angle. Our validation analysis shows an …

Novel Methods For The Time-Dependent Maxwell’S Equations And Their Applications, Sidney Shields

UNLV Theses, Dissertations, Professional Papers, and Capstones

This dissertation investigates three different mathematical models based on the time domain Maxwell's equations using three different numerical methods: a Yee scheme using a non-uniform grid, a nodal discontinuous Galerkin (nDG) method, and a newly developed discontinuous Galerkin method named the weak Galerkin (WG) method. The non-uniform Yee scheme is first applied to an electromagnetic metamaterial model. Stability and superconvergence error results are proved for the method, which are then confirmed through numerical results. Additionally, a numerical simulation of backwards wave propagation through a negative-index metamaterial is given using the presented method. Next, the nDG method is used to simulate …

Block Matching And Wiener Filtering Approach To Optical Turbulence Mitigation And Its Application To Simulated And Real Imagery With Quantitative Error Analysis, Russell C. Hardie, Michael Armand Rucci, Barry K. Karch, Alexander J. Dapore

Electrical and Computer Engineering Faculty Publications

We present a block-matching and Wiener filtering approach to atmospheric turbulence mitigation for long-range imaging of extended scenes. We evaluate the proposed method, along with some benchmark methods, using simulated and real-image sequences. The simulated data are generated with a simulation tool developed by one of the authors. These data provide objective truth and allow for quantitative error analysis. The proposed turbulence mitigation method takes a sequence of short-exposure frames of a static scene and outputs a single restored image. A block-matching registration algorithm is used to provide geometric correction for each of the individual input frames. The registered frames …

Simulation Of Anisoplanatic Imaging Through Optical Turbulence Using Numerical Wave Propagation With New Validation Analysis, Russell C. Hardie, Jonathan D. Power, Daniel A. Lemaster, Douglas R. Droege, Szymon Gladysz, Santasri Bose-Pillai

Electrical and Computer Engineering Faculty Publications

We present a numerical wave propagation method for simulating imaging of an extended scene under anisoplanatic conditions. While isoplanatic simulation is relatively common, few tools are specifically designed for simulating the imaging of extended scenes under anisoplanatic conditions. We provide a complete description of the proposed simulation tool, including the wave propagation method used. Our approach computes an array of point spread functions (PSFs) for a two-dimensional grid on the object plane. The PSFs are then used in a spatially varying weighted sum operation, with an ideal image, to produce a simulated image with realistic optical turbulence degradation. The degradation …

Design Of A Hydrogen-Filled Hollow-Core Fiber Raman Laser, Yangyang Qin

Electronic Theses and Dissertations

The purpose of this study is to investigate the design of a Raman fiber laser based on a molecule hydrogen-filled hollow-core fiber with non-touching single ring of capillaries structure. O-hydrogen vibrational frequency shift of 4155 cm-1 and rotational frequency shift of 587 cm-1 were employed to generate Raman scattering from a 1064nm pump source. A thorough exploration was made to show how all Raman fiber laser components made up: gas chamber, hollow-core fibers, windows. The whole process of chamber design, modification and fabrication were demonstrated. Besides, two kinds of anti-resonant hollow-core fibers were studied and tested. The transmission and loss …

Enhancement Of Bandwidth And Laser Deflection Angle Of Acousto-Optic Deflectors By Dynamic Two-Dimensional Refractive Index Modulation, Tiansi Wang

Electronic Theses and Dissertations

Acousto-Optic Deflectors (AODs) are inertialess optical solid state devices that have advantages over conventional mechanically controlled mirror-based deflectors in numerous scientific and industrial applications. These applications include fluorescence microscopy, sensing, variable-focus lens, photolithography and laser materials processing. AODs are currently operated with a single piezoelectric transducer that modulates the refractive index only in one direction. This operating principle limits the performance of AODs to a narrow acoustic bandwidth of the transducer and a small angle of laser deflection governed by the Bragg diffraction. To overcome these two limitations, the operation of AODs with phased array ultrasonic transducers is analyzed in …

Noise, Stability, And Linewidth Performance Of 10-Ghz Optical Frequency Combs Generated From The Nested Cavity Architecture, Kristina Bagnell

Electronic Theses and Dissertations

Optical frequency combs with wide mode spacing and low timing jitter are relied upon for both time domain and frequency domain applications. It has been previously demonstrated that surrounding a low-Q semiconductor laser chip with a long external fiber cavity and inserting a high finesse Fabry–Pérot etalon into this cavity can produce a mode-locked laser with the desired high repetition rate and narrow optical mode linewidths which are of benefit to applications like photonic analog-to-digital conversion and astronomical spectrograph calibration. With this nested cavity architecture, the quality factor of the resonator is effectively determined by the product of the individual …

High Dynamic Range Display Systems, Ruidong Zhu

Electronic Theses and Dissertations

High contrast ratio (CR) enables a display system to faithfully reproduce the real objects. However, achieving high contrast, especially high ambient contrast (ACR), is a challenging task. In this dissertation, two display systems with high CR are discussed: high ACR augmented reality (AR) display and high dynamic range (HDR) display. For an AR display, we improved its ACR by incorporating a tunable transmittance liquid crystal (LC) film. The film has high tunable transmittance range, fast response time, and is fail-safe. To reduce the weight and size of a display system, we proposed a functional reflective polarizer, which can also help …

Harnessing Spatial Intensity Fluctuations For Optical Imaging And Sensing, Milad Akhlaghi Bouzan

Electronic Theses and Dissertations

Properties of light such as amplitude and phase, temporal and spatial coherence, polarization, etc. are abundantly used for sensing and imaging. Regardless of the passive or active nature of the sensing method, optical intensity fluctuations are always present! While these fluctuations are usually regarded as noise, there are situations where one can harness the intensity fluctuations to enhance certain attributes of the sensing procedure. In this thesis, we developed different sensing methodologies that use statistical properties of optical fluctuations for gauging specific information. We examine this concept in the context of three different aspects of computational optical imaging and sensing. …

Advanced Liquid Crystal Displays With Supreme Image Qualities, Haiwei Chen

Electronic Theses and Dissertations

Several metrics are commonly used to evaluate the performance of display devices. In this dissertation, we analyze three key parameters: fast response time, wide color gamut, and high contrast ratio, which affect the final perceived image quality. Firstly, we investigate how response time affects the motion blur, and then discover the 2-ms rule. With advanced low-viscosity materials, new operation modes, and backlight modulation technique, liquid crystal displays (LCDs) with an unnoticeable image blur can be realized. Its performance is comparable to an impulse-type display, like cathode ray tube (CRT). Next, we propose two novel backlight configurations to improve an LCD's …

Enhanced Ablation By Femtosecond And Nanoseond Pulses, Haley Kerrigan

Electronic Theses and Dissertations

Laser ablation of GaAs by a combination of femtosecond and nanosecond pulses is investigated as a means of enhancing material removal by a femtosecond pulse in the filamentation intensity regime. We demonstrate for the first time increased ablation of GaAs by ultrafast laser pulse plasmas augmented by nanosecond pulse radiation from a secondary laser. Material removal during laser ablation is a complex process that occurs via multiple mechanisms over several timescales. Due to different pulse durations, ablation by femtosecond and nanosecond pulses are dominated by different mechanisms. Ablation can be enhanced by optimally combining a femtosecond and nanosecond pulse in …

Laser-Induced Crystallization Mechanisms In Chalcogenide Glass Materials For Advanced Optical Functionality, Laura Sisken

Electronic Theses and Dissertations

Glass-ceramics (GC) are promising candidates for gradient refractive index (GRIN) optics. These multi-phase, composite materials also exhibit improved physical properties as compared to the parent base glass resulting from the formation of a secondary crystalline phase(s). Nanocrystal phase formation in a multi-component chalcogenide glass (ChG), (GeSe2-3As2Se3)(1-x)-(PbSe)x glass where x = 0-40 has been investigated, and the role of the starting material morphology has been correlated to the resulting composite's optical properties including refractive index, transmission, dispersion, and thermo-optic coefficient. Optical property evolution was related to the type and amount of the crystal phases formed, since through control of the local …

Mode Evolution In Fiber Based Devices For Optical Communication Systems, Bin Huang

Electronic Theses and Dissertations

Space division multiplexing (SDM) is the most promising way of increasing the capacity of a single fiber. To enable the few mode fiber (FMF) or multi-mode fiber (MMF) transmission system, several major challenges have to be overcome. One is the urgent need of ideal mode multiplexer, the second is the perfect amplification for all spatial modes, another one is the modal delay spread (MDS) due to group velocity difference of spatial modes. The main subject of this dissertation is to model, fabricate and characterize the mode multiplexer for FMF transmission. First, we designed a novel resonant mode coupler (structured directional …

Thermal And Waveguide Optimization Of Broad Area Quantum Cascade Laser Performance, Matthew Suttinger

Electronic Theses and Dissertations

Quantum Cascade Lasers are a novel source of coherent infrared light, unique in their tunability over the mid-infrared and terahertz range of frequencies. Advances in bandgap engineering and semiconductor processing techniques in recent years have led to the development of highly efficient quantum cascade lasers capable of room temperature operation. Recent work has demonstrated power scaling with broad area quantum cascade lasers by increasing active region width beyond the standard ~10 ?m. Taking into account thermal effects caused by driving a device with electrical power, an experimentally fitted model is developed to predict the optical power output in both pulsed …

System For Metal Coated Fiber Fabrication, Da Zhang

Electronic Theses and Dissertations

For many specific applications, such as sensors, aerospace, chemical industry, deep-well oil-field industry, metal-coated fiber shows strong abilities to satisfy people's requirement. With in-line coating technology, we are able to coat Aluminum on the fibers. Using electromagnetic induction, we can easily heat an electrically conducting thing such as a metal with the eddy current. This process is defined as Induction heating. And we will melt the Aluminum by this induction heating during drawing the fibers on the tower. Introduce the fiber tower system. The drawing process of in-line technology is formed of the following steps: Position, Melting, Forming into fibers, …

Picosecond Yb-Doped Fiber Amplifier, Weibin Zhu

Electronic Theses and Dissertations

Due to its versatility, rare earth doped fiber amplifier (RDFA) has attracted a lot of researchers worldwide in recent years. Depends on different kinds of rare earth ion, RDFA can be categorized into neodymium doped fiber amplifier (NDFA), erbium doped fiber amplifier (EDFA), thulium doped fiber amplifier (TDFA), and so forth. Among many kinds of RDFA, the ytterbium doped fiber amplifier (YDFA) has received even more interest, especially in high power application, mainly because of its broad gain bandwidth and high conversion efficiency which are due to its relatively simple electronic structure. The purpose of this research is to study …

Photothermal Lensing In Mid-Infrared Materials, Justin Cook

Electronic Theses and Dissertations

A thorough understanding of laser-materials interactions is crucial when designing and building optical systems. An ideal test method would probe both the thermal and optical properties simultaneously for materials under large optical loads where detrimental thermal effects emerge. An interesting class of materials are those used for infrared wavelengths due to their wide spectral transmission windows and large optical nonlinearities. Since coherent sources spanning the mid-wave and long-wave infrared wavelength regions have only become widely available in the past decade, data regarding their thermal and optical responses is lacking in literature. Photothermal Lensing (PTL) technique is an attractive method for …

Filament Wavefront Evolution, Daniel Thul

Electronic Theses and Dissertations

Filamentation is a complex process that gives rise to many nonlinear interactions. However, the fundamentals of filament formation and propagation can be explained in terms of two dominant mechanisms: Kerr self-focusing and plasma defocusing. The first to occur, self-focusing, is responsible for an increase in irradiance through beam collapse. This process requires sufficient initial peak power, on the order of gigawatts for near infrared beams in air. Plasma defocusing then arrests the collapse process once the irradiance reaches the ionization threshold of the medium. These two processes balance each other in an extended plasma channel known as a filament. A …

Novel Photonic Resonance Arrangements Using Non-Hermitian Exceptional Points, Hossein Hodaei

Electronic Theses and Dissertations

In recent years, non-Hermitian degeneracies also known as exceptional points (EPs) have emerged as a new paradigm for engineering the response of optical systems. EPs can appear in a wide class of open non-Hermitian configurations. Among different types of non-conservative photonic systems, parity-time (PT) symmetric arrangements are of particular interest since they provide an excellent platform to explore the physics of exceptional points. In this work, the intriguing properties of exceptional points are utilized to address two of the long standing challenges in the field of integrated photonics- enforcing single mode lasing in intrinsically multimode cavities and enhancing the sensitivity …

Generation Of High-Flux Attosecond Pulses And Towards Attosecond-Attosecond Pump-Probe Experiments, Yang Wang

Electronic Theses and Dissertations

At present, the energy of a single isolated attosecond pulse is limited to nanojoule levels. As a result, an intense femtosecond pulse has always been used in combination with a weak attosecond pulse in time-resolved experiments. To reach the goal of conducting true attosecond pump-attosecond probe experiments, a high flux laser source has been developed that can potentially deliver microjoule level isolated attosecond pulses in the 50 eV range, and a unique experimental end station has been fabricated and implemented that can provide precision control of the attosecond-attosecond pump-probe pulses. In order to scale up the attosecond flux, a unique …

Generation Of Vector Partially Coherent Optical Sources Using Phase-Only Spatial Light Modulators, Milo W. Hyde Iv, Santasri Bose-Pillai, David G. Voelz, Xifeng Xiao

Faculty Publications

A simple and flexible optical system for generating electromagnetic or vector partially coherent sources or beams is presented. The alternative design controls field amplitude (beam shape), coherence, and polarization using only spatial light modulators. This improvement makes the apparatus simpler to construct and significantly increases the flexibility of vector partially coherent source generators by allowing many different types of sources to be produced without changing the physical setup. The system’s layout and theoretical foundations are thoroughly discussed. The utility and flexibility of the proposed system are demonstrated by producing a vector Schell-model and non-Schell-model source. The experimental results are compared …

Scatterometry Of 50 Nm Half Pitch Features, Ruichao Zhu

Optical Science and Engineering ETDs

Metrology technologies are an essential adjunct to Integrated Circuit (I.C.) Semiconductor manufacturing. Scatterometry, an optical metrology, was chosen to measure 50 nm half pitch feature structures. A bread-board scatterometry system has been assembled to provide a non-contact, non-destructive, accurate and flexible measurement. A real-time, on-line scatterometry system has also been demonstrated and proven to provide a high throughput measurement.

Three different types of samples have been measured using the scatterometry setup. The wire-grid polarizer (WGP) sample has been made by Jet and Flash Nanoimprint Lithography with ~100 nm pitch and ~50 nm wide ~200 nm tall Al gratings on fused …

Identity‐Based Schemes For A Secured Big Data And Cloud Ict Framework In Smart Grid System, Feng Ye, Yi Qian, Rose Qingyang Hu

Electrical and Computer Engineering Faculty Publications

Smart grid is an intelligent cyber physical system (CPS). The CPS generates a massive amount of data for efficient grid operation. In this paper, a big data‐driven, cloud‐based information and communication technology (ICT) framework for smart grid CPS is proposed. The proposed ICT framework deploys hybrid cloud servers to enhance scalability and reliability of smart grid communication infrastructure. Because the data in the ICT framework contains much privacy of customers and important data for automated controlling, the security of data transmission must be ensured. In order to secure the communications over the Internet in the system, identity‐based schemes are proposed …

Identity-Based Schemes For A Secured Big Data And Cloud Ict Framework In Smart Grid System, Feng Ye, Yi Qian, Rose Qingyang Hu

Electrical and Computer Engineering Faculty Publications

Smart grid is an intelligent cyber physical system (CPS). The CPS generates a massive amount of data for efficient grid operation. In this paper, a big data-driven, cloud-based information and communication technology (ICT) framework for smart grid CPS is proposed. The proposed ICT framework deploys hybrid cloud servers to enhance scalability and reliability of smart grid communication infrastructure. Because the data in the ICT framework contains much privacy of customers and important data for automated controlling, the security of data transmission must be ensured. In order to secure the communications over the Internet in the system, identity-based schemes are proposed …

Interactive Physics And Characteristics Of Photons And Photoelectrons In Hyperbranched Zinc Oxide Nanostructures, Garrett Edward Torix

Graduate Theses and Dissertations

As is commonly known, the world is full of technological wonders, where a multitude of electronic devices and instruments continuously help push the boundaries of scientific knowledge and discovery. These new devices and instruments of science must be utilized at peak efficiency in order to benefit humanity with the most advanced scientific knowledge. In order to attain this level of efficiency, the materials which make up these electronics, or possibly more important, the fundamental characteristics of these materials, must be fully understood. The following research attempted to uncover the properties and characteristics of a selected family of materials. Herein, zinc …

Dual Role Of Sb Ions As Electron Traps And Hole Traps In Photorefractive Sn2P2S6 Crystals, Brant E. Kananen, Eric M. Golden, Sergey A. Basun, D. R. Evans, A. A. Grabar, I. M. Stoika, John W. Mcclory, Nancy C. Giles, Larry E. Halliburton

Faculty Publications

Doping photorefractive single crystals of Sn₂P₂S₆ with antimony introduces both electron and hole traps. In as-grown crystals, Sb³⁺ (5s²) ions replace Sn²⁺ ions. These Sb³⁺ ions are either isolated (with no nearby perturbing defects) or they have a charge-compensating Sn²⁺ vacancy at a nearest-neighbor Sn site. When illuminated with 633 nm laser light, isolated Sb³⁺ ions trap electrons and become Sb²⁺ (5s²5p¹) ions. In contrast, Sb³⁺ ions with an adjacent Sn vacancy trap holes during illumination. The hole is primarily …

Thermoelectric Magnetohydrodynamic Effects In Solidification Processes, Andrew Kao, Koulis Pericleous, Peter Lee, Biao Cai, Jianrong Gao

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Negative Index In Chiral Metamaterials Under Conductive Loss And First-Order Material Dispersion Using Lorentzian, Condon And Drude Models, Monish Ranjan Chatterjee, Tarig A. Algadey

Electrical and Computer Engineering Faculty Publications

Emergence of negative index (NIM) in chiral materials with conductive loss using standard dispersive models is reported. Positive and negative phase and group indices are realized as expected for NIM behavior for sidebands with opposite polarities.