Electromagnetics and Photonics Commons^™

Designing Enhanced Nonlinearity In Plasmonic Devices With Epsilon-Near-Zero Films, Kevin Tran Le

Electrical Engineering and Computer Science (MS) Theses

The growing demand for energy-efficient optical information processing motivates compact nonlinear photonic devices that can operate at low power. Silicon photonics is a mature platform for linear optical functions, but nonlinear operation remains challenging because of its weak Kerr response, two-photon absorption at telecommunication wavelengths, and limited compatibility with deeply subwavelength plasmonic confinement. This thesis computationally investigates epsilon-near-zero thin films integrated into plasmonic waveguide architectures as a route toward stronger light–matter interaction in compact nonlinear devices.

Two waveguide geometries are examined: a hybrid metal-insulator-metal plasmonic slab waveguide incorporating an ultrathin indium tin oxide epsilon-near-zero layer (5–50 nm), and a dielectric-loaded …

Design Of Energy-Efficient, Scalable, And Flexible Tensor Processing Architectures With Electro-Photonic Integrated Circuits, Oluwaseun Alo

Theses and Dissertations--Electrical and Computer Engineering

In recent years, artificial intelligence has achieved remarkable success across domains such as computer vision, natural language processing, and scientific computing. This progress has been driven largely by advances in deep learning, particularly deep neural networks (DNNs), including convolutional neural networks (CNNs) and transformer-based models. While these models deliver unprecedented accuracy, often surpassing human performance, their computational complexity continues to grow rapidly due to multibillion- and trillion-parameter designs. As model sizes and deployment scales expand, the demand for energy-efficient and high-throughput hardware accelerators has intensified. Conventional electronic platforms based on CPUs, GPUs, ASICs, and FPGAs are increasingly constrained by the …

Nanomagnet Based Reservoir Computing And Quantum Control, Fahim F. Chowdhury

Theses and Dissertations

Conventional CMOS scaling has driven remarkable advances in computing but faces increasing physical and energy constraints, motivating alternative computing paradigms that integrate memory and computation while improving energy efficiency. Nanoscale magnetic systems offer a promising platform for such approaches because their intrinsic nonlinear dynamics and localized magnetic fields can support both classical and quantum information processing. This thesis investigates nanomagnetic systems for physical reservoir computing and, with primary emphasis, for localized quantum control of spin qubits.

The first part explores dipole-coupled nanomagnet arrays as physical reservoirs. Micromagnetic simulations demonstrate nonlinear dynamical behavior with high short-term memory and parity-check capacity, enabling …

Development Of Periodic Plasmonic Nano-Structures For Enhanced Labeled Bio-Sensing Systems, Kyle Zackary Smith

Graduate Theses, Dissertations, and Problem Reports (ETD)

The biomedical industry has seen sustained growth over the past half century, with a continually increasing demand for flexible, easy-to-use, and cost-effective tools. One large area of commercial interest has been point-of-use or point-of-care diagnostics, using optical based Lab-On-Chip (LOC) style systems. Label and label-free fluorescence detection systems are common benchtop modalities that have seen recent integration into these portable, cost-effective LOC applications. However, despite their maturity, there are still opportunities to improve device characteristics, specifically in reference to throughput, limit-of-detection (LOD), and hybrid integration (along with associated costs).

Optical research avenues at WVU have focused on improving these systems …

Exploratory Study Of Semiconductor Nanomembranes In Em Applications, Grant D. Heileman

Electrical and Computer Engineering ETDs

Antenna systems are a cornerstone of modern technologies, playing an increasingly vital role in their advancement. As demand for compact, high-performance, and adaptable communication platforms grows reconfigurable antenna technologies are becoming essential. This research explores a novel front-end reconfigurable antenna system (FERAS) architecture that leverages the mechanical flexibility and photoconductive behavior of semiconductor nanomembrane (SNM) devices. By exploiting the emergent properties of ultra-thin silicon (Si) or gallium arsenide (GaAs) nanomaterials and optically exciting these samples using vertical-cavity surface-emitting laser (VCSEL) arrays, this study develops lightweight, low-cost, deployable antenna structures for satellite communications, remote sensing, GPS, and radar. Despite their significant …

A 0.18 Μm Cmos 40 Ghz Miniaturized Coupled-Line Coupler With Enhanced Directivity, Elsayed Ibrahim Elsaidy, Amr H. Hussein Prof.Dr., Mustafa M. Abd Elnaby Prof. Dr., Anwer S. Abd El-Hameed Dr.

Journal of Engineering Research

No abstract provided.

Guided-Mode Resonant Nanopatterns For Raman Generation And Photonic Devices, Renjie Chen

Electrical Engineering Dissertations - Archive

This dissertation explores advanced strategies for enhancing Raman amplification in silicon photonic devices, focusing on guided-mode resonance engineering and resonant mode manipulation. Silicon, despite its indirect bandgap, exhibits a strong Raman scattering coefficient, enabling it to function as a viable gain medium for integrated photonic systems. However, the realization of efficient, compact, and low-threshold silicon Raman amplifiers and lasers necessitates innovative design approaches that overcome inherent material and structural limitations.

The first chapter provides a fundamental overview of optics, including physical principles, spectral characteristics, guided-mode resonance, simulation methods, and nanopattern fabrication methods.

The second chapter delves into silicon-based Raman amplification …

Photonic Crystal Devices For Chip Scale Sensing Systems, Yudong Chen

Electrical Engineering Dissertations - Archive

This thesis investigates the design and integration of photonic crystal (PC) structures for compact, high-performance optical platforms, with a focus on applications in gas sensing, on-chip lasers, and flat optics. Chapter 1 introduces the fundamental principles of PC design and simulation, highlighting their potential to replace bulky components in micro-gas chromatography (µGC) systems through miniaturization and integration. Chapter 2 explores PC-based nanobeam lasers, including the Lambda-Scale Embedded Active-Region Photonic Crystal (LEAP) laser, which demonstrates strong optical confinement and energy-efficient operation, with energy consumption as low as 8 fJ/bit. These laser designs are evaluated for their suitability in low-power, high-speed on-chip …

Metasurfaces And Their Applications In Photonic Devices, Shuwei Guo

Dissertations and Theses

Metasurfaces are flat artificial optical elements composed of dielectric and/or metallic nanostructures. They can manipulate light in unprecedented ways by altering amplitude, phase, and polarization at subwavelength scales. The ability of these two-dimensional elements to perform multiple optical functions within compact optical systems—while offering high functionality, small form factors, and easy integration into optoelectronic devices—has sparked significant interest across various fields and industries. These applications span imaging, sensing, nonlinear and quantum optics, optical computing, automotive technology, augmented and virtual reality, and more.

In this dissertation, we explore and design new multifunctional metasurfaces with a focus on manipulating spectral responses. First, …

Ellipticity-Controlled Exceptional Points From Nanoscale Metasurfaces, Benjamin Goldberg

McKelvey School of Engineering Graduate Student Theses & Dissertations

Precise control over light polarization is critical for advancing technologies in telecommunica- tions, quantum computing, and image sensing. However, existing methods for manipulating polarization around exceptional points in non-Hermitian systems, have exclusively focused on circular polarization and work with reflected light. To address this limitation, we de- velop a novel metasurface platform with high-Q resonators that enables tunable control of polarization exceptional points across arbitrary ellipticity for transmitted light. Our design uses orthogonally polarized guided mode resonators in a two-layer silicon metasurface, where careful tuning of the dipolar guided mode resonances (DGMRs) and layer spacing allows us to control the …

Nanostructured Silicon Meta-Waveguides And Surfaces For Enhanced Light-Matter Interaction, Saddam Gafsi

All Dissertations

In this study, we tackle the challenge of light-matter interaction engineering and local field enhancement using various silicon photonic platforms based on three different approaches. (i) The first approach is based on boundary condition engineering where we present and show through simulation and experimental results, a silicon nanodisk “diabolo” configuration able to support significant local field enhancement levels in the range ~102 to 104 in the high index medium through proper structural modifications at the nanoscale. We show that the presented optical behavior is consistent with the anapole modes characterized by the observed near-field enhancement and coinciding with far-field suppression. …

Fabrication And Characterization Of A Monolithic Photonic Integrated Circuit With High-Aspect Ratio Photonic Device Structures, Sami A. Nazib

Optical Science and Engineering ETDs

The focus of this work was to create a process to fabricate an InP-based Photonic Integrated Circuit (PIC). The design of the PIC required the photonic components of this device to be created by deep etching of an epitaxially-grown multilayer structure. Therefore, a novel dry etching process was developed to produce very high aspect- ratio (HAR) features. This process not only involved the development of dry etch chemistry but also the engineering of a metal mask structure. The next step of the challenge was to use a polymer-based material that would have two functions: cladding for the etched photonic components …

Mems Optical Cavities For Low Power Communication., Jacob Schopp

Electronic Theses and Dissertations

This thesis discusses the use of MEMS (microelectromechanical systems) optical cavities for use in low power communication. MEMS optical cavities are thin air gaps between an actuated MEMS mirror and a fixed glass encapsulation. By moving the MEMS mirror the reflectivity of the MEMS optical cavity can be changed. This change in reflectivity can be used to transmit information passively by modulating reflected light intensity instead of generating new light using a light source. These MEMS optical cavities are demonstrated using optical fibers for illumination delivery and reflected light collection. In addition to being reflected for communication, the illuminating light …

Mechanical And Electromagnetic Properties Of Incorporating Graphene Oxide In Cementitious Mixtures, Cherif Khalil

Theses and Dissertations

This multidisciplinary study aimed at investigating the impact of incorporating graphene oxide (GO) on the mechanical properties and electromagnetic (EM) shielding effectiveness of cementitious mixtures, as well as critically examining the mechanism with which GO affects their microstructure properties. Analysis of the literature review showed that there are discrepancies in reporting the impact of GO on the mortar mix. Consequently, this study focuses on exploring the cause for such discrepancies and identifies three main factors which are thoroughly investigated. The factors were the different sonication energies applied to the GO (Shear Mixing, 1.5 kJ/ml, 3 kJ/ml and 6 kJ/ml), the …

A Comprehensive Exploration Of Fundamental And Experimental Characteristics Of Nanophotonic Metasurfaces, Nasrin Razmjooei

Electrical Engineering Dissertations - Archive

The advent of diffraction gratings with periodic unit cells has led to numerous advancements in theoretical studies and practical applications. Recently, these structures have been recognized as subsets of “meta-surfaces” or “meta-materials”, employing periodically aligned features at the wavelength scale to manipulate electromagnetic wave properties for diverse applications. This manipulation extends to controlling amplitude, phase, spectral distribution, polarization state, and the local mode structure of light across various spectral expressions. A significant characteristic of these metasurfaces is their ability to couple incident light to laterally propagating leaky Bloch modes in the subwavelength regime, resulting in resonance at specific wavelengths known …

Nano-Patterned Si Structures For Optical Filters And Electro-Mechanical Relays: Fabrication, Characterization, Prospects, And Limitations, Md Ataul Mamun

Theses and Dissertations

Nanofabrication technology, especially nanopatterning, is a rapidly advancing field that has already resulted in creating novel devices and holds promise for producing even more with unmatched performance. These techniques also allow us to gain insight into physical phenomena at the micro- and nanoscale. The ultimate performance of nanofabricated devices and their compatibility with existing Si-based CMOS technology hinge upon the careful selection of materials and precise design, coordinated with meticulous pattern transfer. In this work, we applied nanopatterning techniques on silicon to create optical filters for the shortwave infrared (SWIR) region and nanoelectromechanical system (NEMS) relay-based logic gates. Additionally, these …

Semiconductor Photonic Crystal Surface Emitting Lasers For High Power, High Brightness And High Speed Applications, Chhabindra Gautam

Electrical Engineering Dissertations - Archive

Photonic Crystal Surface Emitting Laser (PCSEL) is the promising third generation semiconductor laser technology as it addresses the challenges of the conventional semiconductor lasers (EEL/VCSEL) by providing single mode high power output with good beam quality (thus high brightness). The large area in plane coupling resulting from the multiple Bragg’s diffraction conditions in the periodic 2D photonic crystal cavities in the lasing cladding region leads to single mode operation over very large area. By model design engineering, such in plane lasing cavity can leak the light out of the plane, which result in surface emission. The ability to scale the …

Gas Assisted Electron Beam Patterning Processes, Deepak Kumar

Theses and Dissertations--Electrical and Computer Engineering

Radiolysis is a complex phenomenon in which molecules subjected to ionizing radiation form new chemical species. Electron-beam irradiation has proven to be a versatile approach for significantly altering materials’ properties and forms the basis for electron-beam lithography using both organic and inorganic resists. Electron-beam exposure is normally carried out under high vacuum conditions to reduce contamination and allow for unhindered interaction between the electrons and the resist material. Exposure under an ambient gas at sub-atmospheric pressures has been found to provide a distinct mechanism which can be exploited to circumvent some of the challenges associated with material processing and significantly …

Reinventing Integrated Photonic Devices And Circuits For High Performance Communication And Computing Applications, Venkata Sai Praneeth Karempudi

Theses and Dissertations--Electrical and Computer Engineering

The long-standing technological pillars for computing systems evolution, namely Moore's law and Von Neumann architecture, are breaking down under the pressure of meeting the capacity and energy efficiency demands of computing and communication architectures that are designed to process modern data-centric applications related to Artificial Intelligence (AI), Big Data, and Internet-of-Things (IoT). In response, both industry and academia have turned to 'more-than-Moore' technologies for realizing hardware architectures for communication and computing. Fortunately, Silicon Photonics (SiPh) has emerged as one highly promising ‘more-than-Moore’ technology. Recent progress has enabled SiPh-based interconnects to outperform traditional electrical interconnects, offering advantages like high bandwidth density, …

Spin Wave Devices For Embedded Applications And Information Processing, Raisa Fabiha

Theses and Dissertations

Device miniaturization is a prerequisite for modern day electronics. Spintronics offers immense potential in energy efficient data storage, solid states devices, ultrafast computing and other electronic applications because of their low power consumption, non-volatile nature and unique activation mechanism. The conventional nano-antennas used for wireless communication, biomedical and wearable devices and IoT applications are limited by the traditional Harrington limit. As we attempt to miniaturize the antenna size beyond its emitted wavelength (also called “subwavelength” antenna), its gain and efficiency plummet. To overcome this challenge, the researchers have proposed magnetoelectric antennas. The ultra-thin film based magnetoelastic antennas suffer from eddy …

Improving Cellphone-Based Bio-Imaging Technique For Fluorescence Detection, Erteza T. Efaz

LSU Master's Theses

The research presented in this thesis focuses on the design, development, and evaluation of a fluorescence detection system. The system is implemented primarily as an Android application, Auto Camera, which leverages smartphone cameras to capture and analyze fluorescent images. The application provides a user-friendly interface with some configurable features like exposure time, ISO speed, and storage limit; as well as defining detection thresholds and setting acquisition intervals. This study begins with the architectural framework of the Android application, which is written in Java using Android Studio. The API compatibility is set to version 33, and users are prompted to grant …

Characterization Of Low Power Hfo2 Based Switching Devices For In-Memory Computing, Aseel Zeinati

Theses

Oxide based Resistive Random Access Memory (RRAM) devices are investigated as one of the promising non-volatile memories to be used for in-memory computing that will replace the classical von Neumann architecture and reduce the power consumption. These applications required multilevel cell (MLC) characteristics that can be achieved in RRAM devices. One of the methods to achieve this analog switching behavior is by performing an optimized electrical pulse. The RRAM device structure is basically an insulator between two metals as metal-insulator-metal (MIM) structure. Where one of the primary challenges is to assign an RRAM stack with both low power consumption and …

A Study On Asymmetric Perfect Vortex: Fractional Orbital Angular Momentum And Nonlinear Interaction, Kunjian Dai

All Dissertations

In this work, the manipulation including generation and detection of the asymmetric perfect vortex (APV) carrying fractional orbital angular momentum (OAM) was demonstrated and discussed. All the manipulation of the modes is in real-time which provides a perfect tool for sensing the dynamic properties of complex media. The OAM-involved nonlinear conversion, specifically the second-harmonic generation (SHG) using the APV and asymmetric Bessel-Gaussian (BG) beams was studied in detail.

The generation and detection of the APV are based on the HOBBIT concept which includes acoustic optical deflector (AOD) and log-polar coordinate transformation optics. The RF signal driving the AOD allows the …

Computational Design Of Fiber-Optic Probes For Biosensing, Suwarna Karna

Electrical Engineering Theses

This thesis presents a study on the optical characteristics of hollow-core photonic crystal fibers (HC-PCFs) with a band gap cladding structure and their applications in optical fiber sensing. This 800B HC-PCF exhibited excellent optical properties and has a flexible structure, which makes them suitable for a wide range of industrial applications. Finite element simulations and structural optimization designs were conducted using the surface plasmon resonance (SPR) technique to determine the optimal performance parameters of the 800B HC-PCF. The fiber was further modified using the SPR technique to improve its practical detection capabilities. The performance of the modified fiber was observed …

Implementing Commercial Inverse Design Tools For Compact, Phase-Encoded, Plasmonic Digital Logic Devices, Michael Efseaff, Kyle Wynne, Krishna Narayan, Mark C. Harrison

Engineering Faculty Articles and Research

Numerical simulations have become an essential design tool in the field of photonics, especially for nanophotonics. In particular, 3D finite-difference-time-domain (FDTD) simulations are popular for their powerful design capabilities. Increasingly, researchers are developing or using inverse design tools to improve device footprints and performance. These tools often make use of 3D FDTD simulations and the adjoint optimization method. We implement a commercial inverse design tool with these features for several plasmonic devices that push the boundaries of the tool. We design a logic gate with complex design requirements as well as a y-splitter and waveguide crossing. With minimal code changes, …

Carrier Transport Engineering In Wide Bandgap Semiconductors For Photonic And Memory Device Applications, Ravi Teja Velpula

Dissertations

Wide bandgap (WBG) semiconductors play a crucial role in the current solid-state lighting technology. The AlGaN compound semiconductor is widely used for ultraviolet (UV) light-emitting diodes (LEDs), however, the efficiency of these LEDs is largely in a single-digit percentage range due to several factors. Until recently, AlInN alloy has been relatively unexplored, though it holds potential for light-emitters operating in the visible and UV regions. In this dissertation, the first axial AlInN core-shell nanowire UV LEDs operating in the UV-A and UV-B regions with an internal quantum efficiency (IQE) of 52% are demonstrated. Moreover, the light extraction efficiency of this …

Void-Semiconductor Gaas Photonic Crystal Surface-Emitting Lasers By Epitaxial Regrowth And Single-Epitaxy Methods, Kevin James Reilly

Nanoscience and Microsystems ETDs

Monolithic semiconductor lasers including edge-emitting lasers (EELs) and vertical-cavity surface-emitting lasers (VCSELs) fail to realize simultaneous achievement of both high-power high-quality beams due to intrinsic limitations of their resonant cavity. Photonic crystal surface emitting lasers (PCSELs) address these structural limitations through employment of a two-dimensional photonic crystal (PC) cavity that creates feedback at a single wavelength for laterally scalable devices. This function of the PC allows PCSELs to power scale with area while maintaining single-mode emission required for diffraction-limited beams. In this way, PCSELs fulfill an industry demand for high-power high-quality lasing from a single chip.

Early PCSELs were fabricated …

Design Of Arbitrary Planar Optical Devices With Full Phase Control Using Nanoimprinting Of Refractive Index, Matthew Panipinto

All Theses

Planar optical devices offer a lightweight solution to the constraints found in traditional optical devices. While subwavelength patterning of optics offers attractive performance and size, traditional fabrication methods demand a trade-off between resolution and throughput that presents a significant hurdle for the widespread use of subwavelength devices. Nanoimprinting of refractive index (NIRI) is a novel fabrication method pioneered in previous work that offers promise in mitigating the throughput issues that hamstring traditional fabrication methods. However, NIRI has not been shown to impart full $2\pi$ phase control in planar optical devices, nor has a method for fabricating arbitrary designs using the …

Digital And Gradient Refractive Index Planar Optics By Nanoimprinting Porous Silicon, Anna Hardison

All Theses

Due to the drawbacks of traditional refractive optics, the implementation of planar or nearly planar optical devices has been of research interest for over a century. Subwavelength gratings are a particularly promising option for creating flat optical devices; however, the implementation of subwavelength grating-based optics is limited by fabrication constraints. Recently, we implemented flat optical devices using the nanoimprinting of refractive index (NIRI) process, a process which was pioneered in a previous study but remained largely unproven in terms of device fabrication. The planar, gradient index microlenses we fabricated were found to possess an effective medium similar to a subwavelength …

Subwavelength Engineering Of Silicon Photonic Waveguides, Farhan Bin Tarik

All Dissertations

The dissertation demonstrates subwavelength engineering of silicon photonic waveguides in the form of two different structures or avenues: (i) a novel ultra-low mode area v-groove waveguide to enhance light-matter interaction; and (ii) a nanoscale sidewall crystalline grating performed as physical unclonable function to achieve hardware and information security. With the advancement of modern technology and modern supply chain throughout the globe, silicon photonics is set to lead the global semiconductor foundries, thanks to its abundance in nature and a mature and well-established industry. Since, the silicon waveguide is the heart of silicon photonics, it can be considered as the core …