Electromagnetics and Photonics Commons^™

Anisoplanatic Electromagnetic Image Propagation Through Narrow Or Extended Phase Turbulence Using Altitude-Dependent Structure Parameter, Monish Ranjan Chatterjee, Ali Mohamed

Electrical and Computer Engineering Faculty Publications

The effects of turbulence on anisoplanatic imaging are often modeled through the use of a sequence of phase screens distributed along the optical path. We implement the split-step wave algorithm to examine turbulence-corrupted images.

Intensity Control Of Dielectric Barrier Discharge Filaments, Matthew Crawford Paliwoda

Masters Theses

"When operated in a filamentary mode, a volume dielectric barrier discharge (DBD) is known to produce patterned plasma structures. These structures are currently being explored for reconfigurable metamaterial applications. In this work the presence and intensity of a single filament, within an array of filaments, was controlled by adjusting the voltage to that filament's individual needle electrode. The current, voltage, and time-averaged normalized light intensity were measured while varying the voltage of the needle through a self-biasing resistance. For a 7.5 kV, 3.2 kHz DBD in air, the needle-controlled filament intensity varies from that of the surrounding filaments to zero …

Electric Field Modification Of A Diffusion Flame With Variable Electrode Geometry, Zachary Pinz

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

Pulsed Inductive Plasma Studies By Spectroscopy And Internal Probe Methods, Warner C. Meeks

Doctoral Dissertations

The broad effort of the Missouri Plasmoid Experiment is to elucidate the energy conversion processes in a pulsed inductive discharge due to the presence of plasma. The test article is a 440 to 490 kHz theta-pinch (or solenoidal) geometry coil with a stored energy of around 80 joules. In this work experimental hydrogen, helium, argon and xenon data at back-fill pressures of 10 to 100 mTorr (1.3 to 133.3 Pa) are obtained and interpreted. Spectral and internal probe studies were performed on MPX Mk.I and Mk.II devices, respectively. IR spectra were acquired in the Mk.I device for argon and xenon. …

The Study Of Electrostatic And Magnetostatic Active Space Radiation Shielding For Deep Space Missions, Leroy A. Fung

Electrical & Computer Engineering Theses & Dissertations

A goal of the National Aeronautics and Space Administration (NASA) has been to develop technologies that will enable deep space explorations. Such missions include a prolonged stay on the Moon and the ability to sustain a long duration of travel time to Mars and beyond. Long-term human exposures to radiation are a crucial concern. Recent research has taken focus on active and passive shielding methods as a way of eliminating the hazard posed by radiation particles. Passive shielding involves the use of materials that has the ability to withstand radiation particles and reduce the dose by stopping or slowing the …

Development Of An Ionic Liquid Ferrofluid Electrospray Source And Mode Shape Studies Of A Ferrofluid In A Non-Uniform Magnetic Field, Edmond Joseph Meyer Iv

Dissertations, Master's Theses and Master's Reports - Open

An electrospray source has been developed using a novel new fluid that is both magnetic and conductive. Unlike conventional electrospray sources that required microfabricated structures to support the fluid to be electrosprayed, this new electrospray fluid utilizes the Rosensweig instability to create the structures in the magnetic fluid when an external magnetic field was applied. Application of an external electric field caused these magnetic fluid structures to spray. These fluid based structures were found to spray at a lower onset voltage than was predicted for electrospray sources with solid structures of similar geometry. These fluid based structures were also found …

Design, Fabrication, And Testing Of An Emr Based Orbital Debris Impact Testing Platform, Jeffrey J. Maniglia Jr.

Master's Theses

This paper describes the changes made from Cal Poly’s initial railgun system, the Mk. 1 railgun, to the Mk. 1.1 system, as well as the design, fabrication, and testing of a newer and larger Mk. 2 railgun system. The Mk. 1.1 system is developed as a more efficient alteration of the original Mk. 1 system, but is found to be defective due to hardware deficiencies and failure, as well as unforeseen efficiency losses. A Mk. 2 system is developed and built around donated hardware from the Naval Postgraduate School. The Mk. 2 system strove to implement an efficient, augmented, electromagnetic …

Configuration Studies Of Electrostatic And Magnetostatic Active Space Radiation Shielding, Trac K. Nguyen

Electrical & Computer Engineering Theses & Dissertations

Developing successful and optimal solutions for mitigating the hazards of radiation in deep space is critical for the success of deep-space long duration explorations, including mission to the Moon, Mars and beyond. A recent report (Tripathi et al., 2008) had explored the feasibility of using electrostatic shielding in conjunction with state-of-the-art materials shielding technologies.

In this thesis research, we study the active electrostatic shielding strategy and examine a hybrid configuration that utilizes both electrostatic and magnetostatic fields. The main advantages of this system are shown to be: (i) much lower magnetic fields that could be below the thresholds set for …

Modeling, Identification, Validation And Control Of A Hybrid Maglev Ball System, Ahmed Elhussein E. Mekky

Mechanical & Aerospace Engineering Theses & Dissertations

In this thesis, the electrodynamics of a single axis hybrid electromagnetic suspension Maglev system was modeled and validated by applying it to a single axis hybrid maglev ball experiment. By exploring its linearized model, it was shown that the single axis hybrid Maglev ball has inherently unstable dynamics. Three control scenarios were explored based on the linearized model; (1) Proportional, Deferential (PD) control, (2) Proportional, Deferential, Integral (PID) and (3) PID controller with pre-filtering. This thesis has shown that a PID controller with a pre-filtering technique can stabilize such a system and provide a well-controlled response.

A parametric system identification …

Day/Night Band Imager For A Cubesat, Eric Stanton

Electrical Engineering

Day/Night Band (DNB) earth sensing and meteorological systems like the Defense Meteorological Satellite Program (DMSP) Operational Linescan System (OLS) provide visible wavelength imagery 24 hours a day that is used primarily for cloud imaging in support of weather forecasting. This paper describes a compact push-broom imager that meets low light imaging requirements for DMSP OLS and the NOAA/NASA Joint Polar Satellite System (JPSS) as documented in the Integrated Operational Requirements Document [1] (IORD) including the imager design, system level concepts of operation for data collection, radiometric and spatial calibration, and data transmission to Earth. This small, lightweight imager complies with …

Comparison Of A High Purity Germanium Gamma Ray Spectrometer And A Multidimensional Nai(T1) Scintillation Gamma Ray Spectrometer, Greg Stratton

Aerospace Engineering

This report compares two different gamma ray spectrometers in terms of performance, operation, and apparatus and also investigates the design and integration challenges of using gamma ray spectrometers in space. The first spectrometer is a one-dimensional high purity germanium (HPGe) spectrometer and the second is a multidimensional NaI(Tl) scintillation spectrometer (MGRS). The key results show that the HPGe exhibits 15 to 27 times better energy resolution than the MGRS, but the MGRS is 52 times more sensitive and removes 177 % more of the background radiation.

Design, Fabrication, And Testing Of An Electromagnetic Rail Gun For The Repeated Testing And Simulation Of Orbital Debris Impacts, Jeff Maniglia, Jordan Smiroldo, Alex Westfall, Guy Zohar

Aerospace Engineering

An Electromagnetic Railgun (EMRG) was designed, built, and tested, capable of firing a projectile a 1 gram projectile at 650 m/s muzzle velocity. The EMRG utilizes an injector, a high voltage power supply, a capacitor bank, inductors and rails. The injector fires 2300 psig Nitrogen gas into the system to provide an initial velocity. The high voltage power supply charges the capacitor bank. The capacitor bank discharges the electric potential built up through the projectile while inside the rails in order to create the EMRG’s force. The inductors are used to pulse form the capacitor bank in order to get …

Aerodynamic Analysis Of An Urban Magnetic Levitation Vehicle, John Matthew Wells

Mechanical & Aerospace Engineering Theses & Dissertations

This thesis will detail the aerodynamic qualities of a magnetic levitation concept vehicle designed to be installed on Old Dominion University's campus. The vehicle is representative of a class of small, low-speed Maglev systems commonly referred to as Urban Maglev. A 1:12 scale model underwent testing in Old Dominion's low speed wind tunnel. Force and moment coefficients were measured over a wide range of yaw angles. Results give insight into crosswind effects and how these forces affect vehicle dynamics. An analysis of this type is important in understanding the ride quality and safety of the system. Force Coefficients range from …

Dynamic Interaction Of Elevated Guideway With Uncontrolled Maglev Vehicles, Sumanth Reddy Velma

Mechanical & Aerospace Engineering Theses & Dissertations

A flexible guideway on an elevated foundation is a key to affordable maglev urban transit. The flexible guideway can undergo significant dynamic motion, either when a vehicle solely relies on an open-loop control system or when a vehicle equipped with feedback control system experiences failure, due to fluctuating magnetic forces between the vehicle and the guideway. In an attempt to understand the effect of the uncontrolled vehicle on the structural response of the guideway, its dynamic interaction with maglev vehicles is investigated under various operating conditions. To this end, two vehicle models using Electrodynamic suspension (EDS) and Electromagnetic suspension (EMS) …

Stability Analysis, Modeling, Simulation And Experimental Testing Of An Ems Maglev System With Structural Flexibility, Aravind M. Hanasoge

Mechanical & Aerospace Engineering Theses & Dissertations

Vehicle-guideway interaction studies of Magnetically Levitated (Maglev) vehicles indicate that structural flexibility can adversely affect the overall stability and performance of such systems. This is one of the reasons why guideways are generally made very rigid. This in turn leads to increased cost of the overall system since guideway construction forms a significant portion of the overall cost. In this dissertation, the influence of structural flexibility on the stability of Electromagnetic Suspension (EMS) Maglev systems is studied. It is shown how inherently unstable and flexible structure EMS Maglev systems can achieve guaranteed stability by using collocated actuators and sensors, along …

Shielding Effectiveness Of Superalloy, Aluminum, And Mumetal Shielding Tapes, Cindy Suit Cheung

Master's Theses

Using MIL-HDBK-419A, MATLAB and Nomographs, Shielding Effectiveness for the Magnetic Field, Electric Field, and Plane Wave were calculated over a frequency range from 10 Hz to 1 GHz. The three shielding tapes used included superalloy, aluminum, and mumetal. Calculations for Shielding Effectiveness involve the computation of Absorption Loss, Reflection Loss, and Re-Reflection Correction Factor. From the outcome of the calculations, it was suitable to conclude that all three metals fulfill the 40 dB Shielding Effectiveness requirements for SGEMP fields for frequencies greater or equal to 1 MHz. Accordingly, all three shielding tapes provide at least 40 dB of shielding to …

Assessing The Potential For Improved Scramjet Performance Through Application Of Electromagnetic Flow Control, Martin F. Lindsey

Theses and Dissertations

Hypersonic flight using scramjet propulsion bridges the gap between turbojets and rockets. Recent efforts focus on magnetogasdynamic (MGD) flow control to mitigate the problems of high thermomechanical loads and low efficiencies associated with scramjets. This research is the first flight-scale, three-dimensional computational analysis of a realistic scramjet to assess how MGD flow control improves scramjet performance. Developing a quasi-one dimensional design tool culminated in the first open source scramjet geometry. This geometry was tested with the Air Force Research Laboratory's electromagnetic computational code. To increase fidelity, an algorithm was developed to incorporate thermochemistry, resulting in the only open-source model of …

Robustness And Control Of A Magnetically Levitated Transportation System, Grzegorz Oleszczuk

Mechanical & Aerospace Engineering Theses & Dissertations

Electromagnetic suspension of Magnetic Levitation Vehicles (Maglev) has been studied for many years as an alternative to wheel-on rail transportation systems. In this work, design and implementation of control systems for a Maglev laboratory experiment and a Maglev vehicle under development at Old Dominion University are described. Both plants are modeled and simulated with consideration of issues associated with system non-linearity, structural flexibility and electromagnetic force modeling. Discussion concerning different control strategies, namely centralized and decentralized approaches are compared and contrasted in this work. Different types of electromagnetic non-linearities are considered and described to establish a convenient method for modeling …

Electromagnetic Propagation Prediction Inside Aircraft Cabins, Genevieve Hankins

Electrical & Computer Engineering Theses & Dissertations

Electromagnetic propagation models for signal strength prediction within aircraft cabins are essential for evaluating and designing a wireless communication system to be implemented onboard aircraft. There are many commercially available software packages for predicting wireless system performance in conventional indoor environments. It is of interest to examine the available software to determine if the aircraft's electromagnetic environment (EME) can be modeled successfully without developing an aircraft specific prediction tool. EnterprisePlanner®, a registered product of Wireless Valley Communications, Incorporated, was selected for the present effort. The performance of the prediction model was evaluated through a comparison with field measurements taken on …

Electromagnetic Wave Propagation Prediction For Wireless Networks Inside Boeing Fuselages, Mennatoallah Youssef

Electrical & Computer Engineering Theses & Dissertations

Commercial grade software is intended for electromagnetic predictions within office buildings; it was used to develop models to analyze propagation inside airplane fuselages. This study shows that Wireless XGTD and Insite software can accurately predict power propagation within airplane fuselages. Current work uses fuselage models, which contain additional internal components. A comparison was made between empty and full fuselage to examine the effects of internal components. Two propagation model types [Fast 3D and Full 3D] were also compared for accuracy to experimental study. It was concluded that completed fuselages are suggested for further simulation study as well as that the …

Timing Of Increasing Electron Counts From Geosynchronous Orbit To Low Earth Orbit, Kirk M. Olson

Theses and Dissertations

Under certain conditions, high energy electron fluxes can increase over short periods of time in the outer radiation belt and diffuse to low altitudes. Sudden increases of high energy electron densities at low altitudes can drastically damage unsuspecting low-earth-orbit satellites. The progression of electron flux increases from a geosynchronous orbit to low-earth orbit during an electron event is somewhat unknown. If the beginning of electron flux increases at low-earth-orbits could be anticipated, warnings could be issued to space system operators allowing time to take proper measures to protect and minimize satellite damage extending satellite lifetimes and space mission operations. The …

Design And Development Of A Low-Cost High Range Resolution X-Band Radar, Paul C. Cantu

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Synthetic Aperture Radar (SAR) is one of the main tools for microwave remote sensing because of its multi-dimensional high resolution characteristics and the capability to operate in nearly all weather conditions, day and night. The University of Nebraska-Lincoln (UNL) initiated the design and development of a low-cost airborne SAR in January 2001 to support our Airborne Remote Sensing Program. The objectives of this project are separated into various evolutionary stages. This thesis will focus on the initial phase of design and construction of an X-band high range resolution radar (HRR) using basic RF /microwave and digital components. The following stages …

Electromagnetic Scattering From A Gap In A Magneto-Dielectric Coating On An Infinite Ground Plane, George R. Simpson

Theses and Dissertations

The electromagnetic scattering from a gap in a magneto-dielectric coating on an infinite ground plane is analyzed. In this context, the gap forms a break only in the magneto-dielectric slab coating while the ground plane is continuous and unbroken. Volume equivalence is used to convert the gap region to one containing unknown volumetric equivalent electric and magnetic currents. The equivalent problem then is one of these currents radiating in the presence of an unbroken grounded magneto-dielectric slab. A Green's function for this geometry is developed consisting of two terms: a direct coupling term and correction term to account for the …

Analysis Of Error Recovery Effects On Digital Flight Control Systems, Arturo Tejada Ruiz

Electrical & Computer Engineering Theses & Dissertations

Life-critical, real-time applications like flight-by-wire aircraft, rely on closed-loop digital control systems and fault-tolerant computer systems to reliably achieve the desired operation. The computer systems, however, may be affected by random hardware/software faults induced mainly by environmental conditions such as high intensity radiated fields (HIRF) and lightning. These harsh electromagnetic environments are known to induce common­ mode faults (CMF) in aircraft electronic systems, which disrupt fault-tolerant provisions and possibly affect the operation of the digital control system. Current flight-by-wire aircraft have computer systems that can neither detect CMF nor recover from them. New systems are under investigation that can recover …

The Fundamental Use And Extension Of Mode Stirred Chambers, Stephen A. Scearce

Electrical & Computer Engineering Theses & Dissertations

Mode stirred chambers are used to perform radiated susceptibility tests on equipment that is expected to operate normally when exposed to electromagnetic (EM) fields. These tests are useful in identifying failure events in airborne equipment and other electronic equipment that are exposed to EM fields. This thesis is focused on further defining the operating environment of mode stirred chambers and relating the electromagnetic environment in the chamber to the electromagnetic environment of an actual aircraft. The majority of mode stirred chamber tests are implemented by using mechanical mode stirring. Mechanical mode stirring is the process of varying boundary conditions in …

Advances In Time-Domain Electromagnetic Simulation Capabilities Through The Use Of Overset Grids And Massively Parallel Computing, Douglas C. Blake

Theses and Dissertations

A new methodology is presented for conducting numerical simulations of electromagnetic scattering and wave propagation phenomena. Technologies from several scientific disciplines, including computational fluid dynamics, computational electromagnetics, and parallel computing, are uniquely combined to form a simulation capability that is both versatile and practical. In the process of creating this capability, work is accomplished to conduct the first study designed to quantify the effects of domain decomposition on the performance of a class of explicit hyperbolic partial differential equations solvers; to develop a new method of partitioning computational domains comprised of overset grids; and to provide the first detailed assessment …