Electrical and Electronics Commons^™

Real-Time Object Tracking With Yolov5 And Recurrent Network On A Hardware Platform, Mohammed Abdulhakeem Alameri

Theses

The advancement of computer vision, particularly in the domain of object tracking, involves the integration of conventional feature-based approaches with contemporary deep learning methodologies. The initial phase of object detection plays a fundamental role in generating prospective objects for further tracking, and its level of success has a direct influence on the overall effectiveness of the tracking process. Many of the methods used to generate candidate objects start with object detection, and then object tracking algorithms are developed to link the object instances together to create the trajectories.
The primary difficulties in object tracking pertain to the establishment of reliable …

Control Methods For Maximizing Power Absorption And Grid Integration In Point Absorber Wave Energy Converters, Abdin Yousif Elamin

Dissertations

Wave energy is an emerging renewable energy source with great potential attributable to its consistent availability and high energy density. Technologies responsible for harnessing this form of energy are referred to as wave energy converters (WECs), among which point absorbers (PAs) are a notable subcategory. Unfortunately, the unpredictable and variable nature of waves, coupled with their complex hydrodynamics, has hindered PAs from achieving maximum wave energy absorption. Moreover, the inherent variability in wave energy leads to fluctuations in the power output of PAs. These power fluctuations pose challenges for grid integration, which requires power quality compatible with grid code standards. …

Models Of Physical-Technical Effects In The Processes Of Changing Three-Phase Asymmetrical Currents Into A Signal In The Appearance Of Secondary Voltage, Timur Urunbayevich Kurbaniyazov

Chemical Technology, Control and Management

This article presents research models, physical processes and mathematical expressions of the processes, quantities and parameters in the elements and structures of three-phase electromagnetic current transformers used in measurement and control systems of asymmetrical three-phase reactive power of power supply systems.

Analysis Of The Pros And Cons Of The Acquisition Of Training Ships By Metis, Jeremiah Yaw Frimpong

World Maritime University Dissertations

No abstract provided.

Furthering Development Of Smart Fabrics To Improve The Accessibility Of Music Therapy, Ellie Nguyen, Daisy Z. Fernandez-Reyes, Franceli L. Cibrian

Engineering Faculty Articles and Research

In this paper, we present the design and development of HarmonicThreads, a smart, cost-effective fabric augmented by generative machine learning algorithms to create music in real time according to the user's interaction. In this manner, we hypothesize that individuals with sensory differences could take advantage of the fabric's flexibility, the music will adapt according to users' interaction, and the affordable hardware we propose will make it more accessible. We follow a design thinking methodology using data from a multidisciplinary team in Mexico and the United States. Then we will close this paper by discussing challenges in developing accessible smart fabrics …

Designing A Cylindrical Capacitive Based Sensor For Monitoring The Table Salt’S Moisture Content During Iodization, Mwajuma Lungo

Tanzania Journal of Engineering and Technology (TJET)

Coaxial cylinder capacitive moisture sensor for determination of moisture content of table salts has been fabricated. The CMS method for determination of moisture content of table salts overcomes the effect of evaporation of iodine in table salt which results from heating in the oven drying method. The CMS overcomes the polarization effect result from the resistive methods of moisture content determination and it is non expensive to construct and it has high accuracy since measurements involves programming system in interpretation of the results. In this research, moisture content sensor based on capacitive principal created using two coaxial cylinders with height …

Mppt Dc-Dc Buck-Boost Converter For Off Grid Hybrid Solar-Wind Battery System In Ikuza Island, Tanzania, Aviti Thadei Mushi

Tanzania Journal of Engineering and Technology (TJET)

Ikuza Island in Kagera-Tanzania faces lack of electricity due to cost challenges of extending the grid by marine cables and other transmission facilities. These makes such endeavour not appealing to the supply authority due to those higher charges. Therefore, this paper undertakes to design hybrid renewable energy sources for the island by specifically focusing on the buck-boost converter for the energy conversion from these renewable resources. The design of the bidirectional buck-boost converter for maximum power point tracking in off-grid hybrid renewable energy systems is multifaceted due to the inhomogeneity nature of the renewable energy sources. The bidirectional buck-boost converter, …

Design And Characterization Of 2.4ghz Antennas For Wireless Sensor Applications, Luis Zogby Brennan

Dissertations and Theses

Wireless sensor networks benefit greatly from advances in circuit integration and miniaturization. However, antennas are bound to specific geometries both in terms of fundamental limits and their response to immediate surroundings. As such, various successful techniques for antenna miniaturization must still be carefully tested and characterized as part of the design process of a sensor system. The work presented here fully characterizes a number of miniaturized 2.4GHz antennas and successfully integrates designs into a sensor system using the highly integrated Single Chip Micro Mote (SCµM), which uses a crystal-less radio design resulting in the requirement of only a …

Electromagnetic Current Transducer For Control Of Reactive Power Consumption Of An Asynchronous Motor From A Single-Phase Supply Of Renewable Energy Source, Llhomjon Xakimovich Siddikov, Saidikrom Saidmurodovich A'Zamov, Dilyorbek Doniyorbek O'G'Li Karimjonov

Chemical Technology, Control and Management

In the world, the demand for electricity and its quality is increasing, in order to further increase the share of renewable energy sources, the reactive power that generates the magnetic field and current in asynchronous motors, which consumes more than 60% of the electricity generated from them and provided by them The research of electromagnetic current transformers, which allows controlling the consumption, evaluating the asymmetry and nonsinusoidal indicators of reactive power and energy, remotely sensing and measuring these quantities with appropriate devices, and converting them into a standard signal, is considered an urgent issue . The research results of the …

Mathematical Model Of An Industrial Robot Built On The Basis Of Linear Motion Mechatron Modules, Matyokubov Nurbek Rustamovich, Rakhimov Temurbek Omonboyevich

Chemical Technology, Control and Management

The use of Industry 4.0 technologies in modern production serves to increase production efficiency. Robots and robotic complexes with innovative intelligent control are widely used in industrial production. However, studying their mechanical part, linear motion mechatronic modules and control system is a complex object. The variety and complexity of control methods and operating modes negatively affects the operator's working time and production productivity. In such cases, it is necessary to improve control methods and develop technologies used in industry, including robots and robotic manipulators, which allow to perform short movements with high accuracy and speed. In the article, the mathematical …

Challenges In Optimization For The Performance On Sustainability Dimensions In Reverse Logistics Social Responsibility, Sumarsono Sudarto, Katsuhiko Takahashi, Mochammad Dewo

Makara Journal of Technology

Reverse logistics social responsibility is preferred as the most acceptable solution for addressing the challenges in stakeholders’ debate regarding social responsibility in supply chains because it involves as many actors as possible in the supply chain to perform social responsibility to achieve sustainability. This paper explores the challenges in achieving optimal policies in sustainability dimensions for collection and recycling facilities in reverse logistics. Sustainability dimensions include economic, environmental, and social aspects. The reverse logistics is modeled on System Dynamics, and a simplified statistical analysis using a contour chart is employed in numerical experiments. Results show a narrow area of optimal …

Distributed Optimization With Limited Communication In Networks With Adversaries, Iyanuoluwa Emiola

Electronic Theses and Dissertations, 2020-2023

We all hope for the best but sometimes, one must plan for ways of dealing with the worst-case scenarios, especially in a network with adversaries. This dissertation illustrates a detailed description of distributed optimization algorithms over a network of agents, in which some agents are adversarial. The model considered is such that adversarial agents act to subvert the objective of the network. The algorithms presented in this dissertation are solved via gradient-based distributed optimization algorithm and the effects of the adversarial agents on the convergence of the algorithm to the optimal solution are characterized. The analyses presented establish conditions under …

Origin Of Capacitance In Perovskite Solar Cells: Insight Vision On The Energy Band Diagram, Ziad Khalifa, Sameh Abdellatif, Monica Roman

Chemical Engineering

In recent years, perovskite solar cells (PSCs) have made significant progress, with fast improvements in energy conversion. Although they have become incredibly efficient in a short amount of time, they still face several obstacles before becoming a viable commercial technology. Researchers spent time looking for an equivalent circuit that could describe the J-V curves of PSCs and demonstrate the physical processes of optical absorption and carrier transit. In this paper, we proposed a model of perovskite solar cells (PSCs) using SCAPS software to determine the parasitic elements and show the solar cell's behavior. A previous model of a perovskite solar …

Optimized Beam-Forming For Massive Mimo- Ofdm System, Nelly M. Shafik, Hazem H. El-Banna

Mansoura Engineering Journal

Massive Multiple-Input Multiple-Output (MIMO) wireless communication systems, achieved by large number of antennas, is the main secrete of Fifth Generation (5G) wireless communication networks powerful. In this paper, novel active antennas selection algorithm is proposed with resulted in efficient system performance with only half number of antenna elements. In order to gain optimum performance of massive MIMO wireless communication systems, it is vital to well analyze channel models which is glory indication for massive MIMO system characteristics. In this paper, MIMO system is simulated in bad frequency selective fading channel which is considered the most matching channel in case of …

Design Of Microwave Superconducting Resonators For Materials Characterization, Xinyi Zhao

McKelvey School of Engineering Graduate Student Theses & Dissertations

A resonator is a specialized device capable of storing and transferring energy at precise frequencies. Resonators find widespread use in various fields, such as electrical engineering, physics, and material science, owing to their exceptional ability to accurately measure, filter, and amplify signals. Different types of resonators exist, but coplanar waveguide (CPW) and coupled coplanar waveguide (CCPW) resonators are popular due to their high-frequency operation and easy integration into microfabrication processes.

Spectral Broadening Effects On Pulsed-Source Digital Holography, Steven A. Owens, Mark F. Spencer, Glen P. Perram

Faculty Publications

Using a pulsed configuration, a digital-holographic system is setup in the off-axis image plane recording geometry, and spectral broadening via pseudo-random bit sequence is used to degrade the temporal coherence of the master-oscillator laser. The associated effects on the signal-to-noise ratio are then measured in terms of the ambiguity and coherence efficiencies. It is found that the ambiguity efficiency, which is a function of signal-reference pulse overlap, is not affected by the effects of spectral broadening. The coherence efficiency, on the other hand, is affected. As a result, the coherence efficiency, which is a function of effective fringe visibility, is …

A Portable, Low Power Radiation Detection And Identification System For High Count Rate, Long Term Monitoring, Samuel J. Murray

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

This dissertation presents the design of a novel radiation detection and identification system that can operate continuously over a period of 8 days while detecting at 30,000 counts per second, consuming a total of 11 mW. The entire system is highly integrated, containing a gamma ray detector, a high voltage detector power supply, and a multichannel analyzer (MCA) system-on-a-chip (SoC), which are all combined into a compact form using a multi-level, configurable printed circuit board design. The MCA SoC, fabricated using a 65 nm CMOS technology, features two enabling resources to allow low power detections at high count rates for …

Cross-Layer Cryptography For Wireless Communication, Hesham Mohammed

Legacy Theses & Dissertations (2009 - 2024)

Spectrum access in the next-generation wireless networks will be congested, competitive, and vulnerable to malicious intents of strong adversaries. This motivates us to rethink secure wireless communication in a zero-trust electromagnetic environment. Classical cryptography is an add-on feature that provides semantic security between trusted partners at higherlayers. However, cryptography ignores cross-layer interaction with physical layer which is required to enhance the secrecy level of the transmitted waveform. Moreover, cryptographic schemes might no longer be secure in the quantum era. Physical layer security (PLS) is introduced as a complement to cryptography, where security is provided in the physical layer using the …

The Application Of Model Predictive Control On Paralleled Converters For Zero Sequence Current Suppression And Active Thermal Management, Justin Dobey

All Theses

In the field of power electronics, the control of rectifiers is a crucial area of study. Rectifiers are used to convert AC power into DC power, and are commonly used in a wide range of applications, including renewable energy systems, industrial automation, and consumer electronics. However, in medium and high-power systems when multiple rectifiers are connected in parallel to a DC bus, stability issues can arise, including voltage fluctuations, zero sequence circulating current, and thermal imbalance.

Achieving stable DC bus voltage is essential for maintaining the proper functioning of electronic devices, while suppressing zero sequence current is necessary for protecting …

Virtual Prototyping Of Pebb Based Power Electronics System For Ground Vehicles, Yi Li

All Theses

Power electronics are heavily involved in power and energy systems in plenty of applications nowadays. The increase of demand brings more challenges into simulations for development. Considering the complexity of the systems and high frequency operational conditions, this paper presents comprehensive research on modeling, simulating, and validation on ground vehicle propulsion system applications.

To reduce the computational burden, the Power Electronics Building Blocks concept is utilized to simplify the structure of modeling under different conversion scenarios in ground vehicle systems. In addition, the Average and Switching versions models are included. To speedup the simulation, the engagement of advanced computing technique …

Integrating Sensor Development, Risk Assessment, And Community Engagement To Support Environmental Justice In The Rural Community Of El Tiple, Colombia, David Bahamon Pinzon

All Dissertations

In Colombia, ethnic communities have traditionally been responsible stewards of natural resources. They recognize the importance of these resources for their livelihood, as well as their ancestral and cultural heritage. El Tiple, a rural Afro-Colombian community, has been affected by the incursion of private corporations that promoted the expansion of sugarcane monocrops in their territory. Since the introduction of the monoculture industry, local freshwater sources have been depleted due to intensive water use for irrigation of the sugarcane crops. Additionally, the intensive usage of agrochemicals has been linked with loss of native flora, damages to family farms, and pollution of …

Inkjet-Printed Electrochemical Sensors For Lead Detection, Annatoma Arif

Open Access Theses & Dissertations

This PhD dissertation research has developed a simple, miniaturized, sensitive, selective, reproducible, and disposable 3D (inkjet printed – additive manufacturing technology) gold (Au) plated electrochemical sensor (ECS) on shape memory polymer (SMP) for aqueous lead detection. This technology has shown promising performance in the application of electrochemical sensing (lead (II) detection) due to increased effective electrode surface area (7.25 mm^2 ± 0.15 mm^2) despite miniaturizing lateral surface area (4.19 mm^2). The design, fabrication processes, optimization including bismuth functionalization, evaluation, uncertainty analysis, and cost analysis of the novel SMP based inkjet printed Au plated sensor have been delineated in this manuscript …

Metal Additive Microfabrication Of Semiconductor Packages With Inbuilt Thermal Management System, Bhushan Lohani

Open Access Theses & Dissertations

Moore’s law describes the development capabilities in electronics manufacturing. Although his estimation held for decades, at present, the doubling of components every two years seems to be approaching a halt. The assessment was based on the miniaturization of transistors to create space for more. Miniaturization led to higher component density, decreased cost, lowered power consumption, and compactness. However, it also came with high current density, increased Joule heating, and reduced critical charge. One of the limiting factors is the heat generated from such devices, which is heavily discussed in International Roadmap for Devices and Systems (IRDS) and International Technology Roadmap …

A Novel Brain Computer Interface Design, Steven Vogan

Senior Honors Theses

A brain computer interface (BCI) is a system which connects neural signals to a computer system. They have been used for controlling systems including robotics, on-screen computer control such as mouse movement, typing, and synthesizing audio signals. Invasive, or implanted, systems are often long-term medical solutions, or used for research where very clear signal is required. Non-invasive systems usually rely on exterior signals gathered through a headset using one or more electrode sensors. These signals are composed of sums of neuron activation potentials from brain activity and can be used to determine particular aspects of brain function. All BCIs rely …

Investigation Of Vo2 Thin Films And Devices For Opto-Electromechanical Applications, Samee Azad

All Dissertations

Specialized and optimized low pressure direct oxidation technique have been implemented to synthesize high quality VO₂ thin films on various substrates (sapphire, SiO₂/Si, AT-cut quartz, GaN/AlGaN/GaN/Si and muscovite). Structural and surface characterization methods such as X-ray diffraction, Raman spectroscopy and atomic force microscopy have been administered on the grown VO₂ films which indicate their material quality. Transition of characteristics of the VO₂ films are caused by semiconductor metal transition (SMT). This phenomenon is attributed as the change maker in transition of resistivity and transmitted optical power through the VO₂ films. Apart the substrates mentioned, …

Chip- And System-Level Reliability On Sic-Based Power Modules, Pengyu Lai

Graduate Theses and Dissertations

The blocking voltage, switching frequency and temperature tolerance of power devices have been greatly improved due to the revolution of wide bandgap (WBG) materials, such as silicon carbide (SiC) and gallium nitride (GaN). Owing to the development of SiC-based power devices, the power rating, operating voltage, and power density of power modules have been significantly improved. However, the reliability of SiC-based power modules has not been fully explored yet. Thus, this dissertation focuses on the chip- and system-level reliability on SiC-based power modules. For chip-level reliability, this work focuses on on-chip SiC ESD protection devices for SiC-based integrated circuits (ICs). …

Study Of Radiation Effects In Gan-Based Devices, Han Gao

Electrical Engineering Theses and Dissertations

Radiation tolerance of wide-bandgap Gallium Nitride (GaN) high-electron-mobility transistors (HEMT) has been studied, including X-ray-induced TID effects, heavy-ion-induced single event effects, and neutron-induced single event effects. Threshold voltage shift is observed in X-ray irradiation experiments, which recovers over time, indicating no permanent damage formed inside the device. Heavy-ion radiation effects in GaN HEMTs have been studied as a function of bias voltage, ion LET, radiation flux, and total fluence. A statistically significant amount of heavy-ion-induced gate dielectric degradation was observed, which consisted of hard breakdown and soft breakdown. Specific critical injection level experiments were designed and carried out to explore …

Design Of Asic Based Electrical Impedance Tomography Microendoscopic System For Prostate Cancer Surgical Marginal Assessment, Mohsen Shahghasemi

Dartmouth College Ph.D Dissertations

Prostate cancer is the second most common cancer in the United States. It is typically treated by surgically excising the cancerous section of the prostate. Because there is not always a visible distinction between the healthy and cancerous sections, surgery often leaves some cancerous tissue behind. This is referred to as a positive surgical margin and it requires adjuvant treatment with adverse side effects. Electrical impedance tomography (EIT) is a low-cost low-form-factor method that can be used to assess surgical marginal intraoperatively to ensure that no cancerous tissue is left behind. EIT-based surgical margin assessment works on the principle that …

Flux-Quanta Injection For Nonreciprocal Current Control In A Two-Dimensional Noncentrosymmetric Superconducting Structure, Serafim Teknowijoyo, Sara Chahid, Armen Gulian

Mathematics, Physics, and Computer Science Faculty Articles and Research

We designed and experimentally demonstrated a four-terminal superconducting device, a “quadristor,” that can function as a nonlatching (reversible) superconducting switch from the diode regime to the resistive state by application of a control current much smaller than the main transport current. The device uses a vortex-based superconducting-diode mechanism that is switched back and forth via the injection of flux quanta through auxiliary current leads. Our finding opens a new research area in the field of superconducting electronics.

Design Of A Burst Mode Ultra High-Speed Low-Noise Cmos Image Sensor, Xin Yue

Dartmouth College Ph.D Dissertations

Ultra-high-speed (UHS) image sensors are of interest for studying fast scientific phenomena and may also be useful in medicine. Several published studies have recently achieved frame rates of up to millions of frames per second (Mfps) using advanced processes and/or customized processes.

This thesis presents a burst-mode (108 frames) UHS low-noise CMOS image sensor (CIS) based on charge-sweep transfer gates in an unmodified, standard 180 nm front-side-illuminated CIS process. By optimizing the photodiode geometry, the 52.8 μm pitch pixels with 20x20 μm^2 of active area, achieve a charge-transfer time of less than 10 ns. A proof-of-concept CIS was designed and …