Electrical and Electronics Commons^™

Modeling, Control And Simulation Of Control-Affine Nonlinear Systems With State-Dependent Transfer Functions, Roger Kobla Kwadzogah

Dissertations

There has been no known research that applies nonlinear transfer function to a nonlinear control problem. The belief is that nonlinear systems have no transfer functions. The Laplace transformation required to define transfer functions is not tractable mathematically when the coefficients of the differential equation are functions of state, output and control variables. In other words, it is not defined for systems that do not obey principles of superposition. Only linear systems obey this principle. Therefore, this dissertation work represents the very first research to demonstrate how transfer functions can be used to represent and design feedback control for nonlinear …

Non-Linear Electromechanical System Dynamics, Shathiyakkumar Ganapathy Annadurai

LSU New Orleans Theses and Dissertations

Electromechanical systems dynamics analysis is approached through nonlinear differential equations and further creating a state space model for the system. There are three modules analyzed and validated, first module consists two magnet coupled with a mass spring damper system as a band-pass system, Low-pass equivalent system and Low-pass equivalent system through perturbation analysis. Initially Band Pass frameworks for the systems are formulated considering the relation between the mechanical forcing and current. Using Mathematical tools such as Hilbert transforms, Low-Pass equivalent of the systems are derived. The state equations of the systems are then used to design a working model in …

The Smart Clock, Cory Koehler, Addison Loda, Hannah Posey-Scholl, Isak Rask

PSU High School Innovation Challenge

Modern technology continues to change and improve constantly as people find ways to make things faster, smaller, and better - but these changes often leave the elderly behind. This year’s Innovation Challenge asked groups to focus on how to create and improve technology geared towards the aging generations. For our initial research, the Grant High School team and mentors visited an elderly care center and interviewed a few of the residents, asking what types of technology currently improve their lives, and what types of technology could potentially improve their lives.

The Problem: After the interviews, we were able to identify …

Characterization And Model Verification Of Sic Cmos Transmisison Gates, Andrew H. Taylor

Electrical Engineering Undergraduate Honors Theses

The aim of this thesis is to present and explore the results of a method for characterizing CMOS transmission gates in an IC design process, as well as to describe their importance in circuit design. The method applies to any fabrication process, but the work for this thesis was conducted in a silicon-carbide process, in the first round of fabrication. The first section covers basic information regarding transmission gates, as well as showing their value in circuit design. Secondly, the design, simulation, and implementation of the characterizing test structures is detailed. The third section delineates the test setup and procedures …

Security Analysis Of Phasor Measurement Units In Smart Grid Communication Infrastructures, Mehrnaz Sharifian

Department of Computer Electronics and Engineering: Dissertations, Theses, and Student Research

Phasor Measurement Units (PMUs), or synchrophasors, are rapidly being deployed in the smart grid with the goal of measuring phasor quantities concurrently from wide area distribution substations. By utilizing GPS receivers, PMUs can take a wide area snapshot of power systems. Thus, the possibility of blackouts in the smart grid, the next generation power grid, will be reduced. As the main enabler of Wide Area Measurement Systems (WAMS), PMUs transmit measured values to Phasor Data Concentrators (PDCs) by the synchrophasor standard IEEE C37.118. IEC 61850 and IEC 62351 are the communication protocols for the substation automation system and the security …

A Remote Capacity Utilization Estimator For Wlans, Yi Ding

Doctoral

In WLANs, the capacity of a node is not fixed and can vary dramatically due to the shared nature of the medium under the IEEE 802.11 MAC mechanism. There are two main methods of capacity estimation in WLANs: Active methods based upon probing packets that consume the bandwidth of the channel and do not scale well. Passive methods based upon analyzing the transmitted packets that avoid the overhead of transmitting probe packets and perform with greater accuracy. Furthermore, passive methods can be implemented locally or remotely. Local passive methods require an additional dissemination mechanism in order to communicate the capacity …

High-Speed Delta-Sigma Data Converters For Next-Generation Wireless Communication, Sakkarapani Balagopal

Boise State University Theses and Dissertations

In recent years, Continuous-time Delta-Sigma(CT-ΔΣ) analog-to-digital converters (ADCs) have been extensively investigated for their use in wireless receivers to achieve conversion bandwidths greater than 15 MHz and higher resolution of 10 to 14 bits. This dissertation investigates the current state-of-the-art high-speed single-bit and multi-bit Continuous-time Delta-Sigma modulator (CT-ΔΣM) designs and their limitations due to circuit non-idealities in achieving the performance required for next-generation wireless standards. Also, we presented complete architectural and circuit details of a high-speed single-bit and multi-bit CT-ΔΣM operating at a sampling rate of 1.25 GSps and 640 MSps respectively (the highest reported sampling rate in a 0.13 …

Seeking Cleaner Air - Accessible Air Quality Monitoring And Event Diagnosis, James Allen Hall Jr.

Boise State University Theses and Dissertations

Airborne particulate matter has been shown to be associated with morbidity and mortality, and can have a detrimental impact on sensitive materials and processes. Understanding the levels and movements of particulate matter in an enclosed space can lead to a reduction in the negative consequences of poor air quality. A system of environmental sensors including particulate matter, selected gases, and other atmospheric factors can be used to provide a real-time assessment of air quality. This assessment can be used to assist in the diagnosis of the source of particulate matter. This dissertation describes the creation of a framework for the …

Evaluation Of Conservation Voltage Reduction As A Tool For Demand Side Management, Ali Dorrody

UNLV Theses, Dissertations, Professional Papers, and Capstones

To ensure stability of the power grid, electricity supply and demand must remain in balance in real time. Traditionally utilities, call upon peaking power plants to increase power generation to meet the peak demand during the afternoons of the hot summer months. Demand-side management (DSM), which includes energy efficiency and demand response (DR), works from the other side of the equation - instead of adding more generation to the system, it pays energy users to reduce consumption as it is cheaper and easier to procure than traditional generation. As a consequence, demand-side management allows utility customers to act as a …

Theoretical Modeling Of Laser-Induced Absorption Phenomena In Optical Materials, Chris Ferris

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

For over five decades, laser-induced damage and breakdown in optical materials has been an active field of research. As laser systems continually advance, new opportunities to study laser/material interactions arise. This thesis begins by presenting the damage mechanisms and absorption phenomena that lead to laser-induced breakdown. An in depth understanding of these processes led to the development of rate equations that describe electron density growth in a material exposed to a strong electromagnetic wave. These rate equations laid the foundation for the construction of a theoretical model. By using variable laser and material parameter inputs, the model calculates the laser-induced …

Financial Appraisal Of A Small Scale Wind Turbine With A Case Study In Ireland, Tony Kealy

Articles

This research seeks to evaluate the economic benefits to be gained by installing a small-scale wind turbine for a customer with a three-phase electrical supply requirement. The evidence for the claims made in this paper is obtained by using actual data obtained from the installed equipment over a three year period. The objective is to accurately appraise the financial investment using real data. There appears to be limited studies conducted into this type of research, possibly because the renewable energy sector is in the infancy stage in the host country, Ireland. There are some wind energy installations with financial appraisal …

A Technical Assessment Of Aperture-Coupled Antenna Technology, Justin T. Obenchain

Senior Honors Theses

Aperture coupling refers to a method of construction for patch antennas, which are specific types of microstrip antennas. These antennas are used in a variety of applications including cellular telephones, military radios, and other communications devices.

The purpose of this thesis is to assess the benefits and drawbacks of aperture-coupled antenna technology. To develop a successful analysis of the patch antenna construction technique known as aperture coupling, this assessment begins by examining basic antenna theory and patch antenna design. After uncovering some of the fundamental principles that govern aperture-coupled antenna technology, a hypothesis is created and assessed based on the …

Numerical Examination Of The Nonlinear Dynamics Of A Hybrid Acousto-Optic Bragg Cell With Positive Feedback Under Profiled Beam Propagation, Fares S. Almehmadi, Monish Ranjan Chatterjee

Electrical and Computer Engineering Faculty Publications

In standard weak interaction theory, acousto-optic Bragg analysis typically assumes that the incident light and sound beams are uniform plane waves. Acousto-optic Bragg diffraction with nonuniform profiled input beams is numerically examined under open loop via a transfer function formalism. Unexpected deviations in the first-order diffracted beam from the standard theory are observed for high �� values. These deviations are significant because the corresponding closed-loop system is sensitive to input amplitudes and initial conditions, and the overall impact on the dynamical behavior has not been studied previously in standard analyses. To explore the effect of such nonuniform output profiles on …

Engine Control Unit Tuning Module Test System, Efren Alonzo Cabebe Jr.

Computer Engineering

A test system has been developed to provide quality assurance and functional testing for soon-to-be mass produced engine tuning modules. The system is comprised of two halves: the front-end graphical user interface and back-end microcontroller platform. The use of the interface is intuitive in starting tests and reporting the status of completed tests. The back-end microcontroller platform performs the physical tests. Two high precision analog-to-digital converters and two digital-to-analog converters provide the inputs to and receive the outputs from the module, with another pulse-width-modulated pin tied to the tachometer input. Alongside the test system infrastructure, a simple suite of tests …

Real-Time Control Of Shunt Active Power Filter Under Distorted Grid Voltage And Unbalanced Load Condition Using Self Tuning Filter, Samet Biricik, Soydan Redif, Ozgur Ozerdem, Shafiuzzaman K. Khadem, Malabika Basu

Articles

In this paper, an alternative control method is proposed to improve the harmonic suppression efficiency of the active power filter in a distorted and an unbalanced power system to compensate for the perturbations caused by the unbalanced non-linear loads. The proposed method uses a self-tuning filter (STF) to process the grid voltage in order to provide a uniform reference voltage to obtain the correct angular position of the phase locked loop. Moreover, the required compensation currents are obtained by implementing another STF in the transformed set of currents in order to separate the fundamental and the harmonic currents. This allows …

Generation Of Bipolar Nanosecond Pulses, Sambasiva Rao Rajulapati

Electrical & Computer Engineering Theses & Dissertations

Bipolar pulse generation has been studied using transmission line technology, which was mainly used for monopolar pulse generation. In this thesis, low impedance, high current, nanosecond pulse generators were designed, constructed and tested. Five transmission lines were connected in parallel, so the impedance was 10 n. The transmission lines were switched by a spark gap switch operated in air. The closing of the switch creates a matched condition on one side of the transmission lines and a short circuit on the other side of the transmission lines. When the transmission lines are precharged, one of the two waves in opposite …

Effect Of Image Capture Devices On The Accuracy Of Black-Box Printer Models, Jae Sung Youn

Open Access Theses

In the process of electrophotograpic (EP) printing, the deposition of toner to the printer-addressable pixel is greatly influenced by the neighboring pixels of the digital halftone. To account for these effects, printer models can either be embedded in the halftoning algorithm, or used to predict the printed halftone image at the input to an algorithm being used to assess print quality. Most recently, a series of six new models were developed to accurately account for local neighborhood effects and the influence of a 45 × 45 neighborhood of pixels on the central printer-addressable pixel. All these models are referred to …

Studies In Software-Defined Radio System Implementation, Harold A. Haldren Iii

Senior Honors Theses

Over the past decade, software-defined radios (SDRs) have an increasingly prevalent aspect of wireless communication systems. Different than traditional hardware radios which implement radio protocols using static electrical circuit, SDRs implement significant aspects of physical radio protocol using software programs running on a host processor. Because they use software to implement most of the radio functionality, SDRs are much more easily modified, edited, and upgraded than their hardware-defined counterparts. Consequently, researchers and developers have been developing previously hardware-defined radio systems within software. Thus, communication standards can be tested under different conditions or swapped out entirely by simply changing some code. …

Dynamic Characteristic Identification Of Seismic-Excited Multi-Story Buildings Through Response-Only Technique, Agung Budipriyanto, Priyo Suprobo

Makara Journal of Technology

Identifying dynamic characteristics of civil engineering structures is still a challenging task. It intends to assess behavior of the structures under time-dependent loads. This paper discusses a methodology suitable for identifying the characteristics of multi-story buildings using only their measured response under earthquake ground excitations. Appropriateness of technique used for structural identification was corroborated through coherence of the structure’s responses. The methodology was applied for identifying the characteristics of 14-story and 20-story office buildings located in a high seismic region. Responses of these two buildings recorded during three different seismic ground motions were investigated. The buildings’ response spectral densities and …

Synthesis And Characterization Of Soy-Based Polyurethane Foam With Utilization Of Ethylene Glycol In Polyol, Flora Elvistia Firdaus

Makara Journal of Technology

The use of vegetable oils on replacing petroleum has attracted attention of many researchers. The chemical structure of vegetable oils are different from petrochemicals, so the structure of soybean oil has to be chemically modified through its unsaturated fatty acid chain in triglyceride. A two step process was conducted for the preparation of soy-polyol in designated temperatures; 50 °C, 60 °C, and 70 °C. Ethylene glycol (EG) as co-reagent was taking part in soy-polyol synthesis, and the soy-polyol was used as a sole polyol for polyurethane synthesis. Referred to the previous study, the existence of EG in polyurethane synthesis can …

Performances Of Free-Space Optical Communication System Over Strong Turbulence, Ucuk Darusalam, Purnomo Sidi Priambodo, Harry Sudibyo, Eko Tjipto Rahardjo

Makara Journal of Technology

We report an experimental of free-space optical communication (FSOC) system that use tube propagation simulator (TPS) as the turbulence medium. The FSOC system use wavelength of 1550 nm at the rate transmission of 1000 Mbps and amplified with EDFA at the output of +23 dBm. Index structure of 10-15–10-13 as the representation of atmosphere index turbulences are used for simulation of intensity distribution model or scintillation. The simulation use gammagamma and K model as well. The beam wave propagation models used in simulation are plane wave, spherical wave and Gaussian wave. Spherical wave achieves highest performance via gamma-gamma in strong …

Preparations Of Nanostructured Silicide Bundles And Oxide Arrays, Hirokazu Tatsuoka, Wen Li, Erchao Meng, Daisuke Ishikwa, Kaito Nakane, Shingo Oda, Tomoji Matsushita, Natsuki Kurebayashi

Makara Journal of Technology

A variety of nanostructured silicide bundles and oxide nanowire arrays with abundant, non-toxic materials we are prepared. The CrSi2 nanowire and Mg2Si/MgO composite nanowire bundles were synthesized using a Si substrate and a SiOx nanofiber bundle, respectively. The hexagonal MoSi2 nanosheet bundles were also synthesized using a MoS2 layered material as a template. In addition, ZnO, CuO/Cu2O and a-Fe2O3 nanowire arrays were prepared on semiconductor or metallic substrates. The growth phenomena and the structural properties of the nanostructured materials awere investigated. In addition, the preparations of axial and radial nanowire structures weare examined.

Bioethanol Production From Iles-Iles And Sorghum Starch As Raw Materials (Effect Of Cacl 2 Addition And Saccharification Time), Kusmiyati Kusmiyati, Ali Mahmudi

Makara Journal of Technology

Bioethanol produced from agricultural sources is one alternative energy that has been developed to substitute for petroleum. However, the use of food sources such as corn and cassava to produce bioethanol still face obstacles that lead to the scarcity of food and an increase in food prices. The aim of this study was to produce bioethanol from sorghum and iles-iles, which are not used by humans as food, especially in Indonesia. For both materials, the variables studied were saccharification time (4, 8, 24, and 48 h) and concentration of CaCl2 added to the liquefaction slurry (0, 100, 200, 300, and …

The Effect Of Zephyr Layer Orientation On Zephyrboard Made From Oil Palm Petiole, Lusita Wardani, Muhamad Yusram Massijaya, Yusuf Sudo Hadi, I Wayan Darmawan

Makara Journal of Technology

It is very important to utilize oil palm petiole for the production of zephyr boards. This study aimed to analyze the effect of layer orientation on zephyr board quality. Zephyr boards were made with three coating patterns (A = cross perpendicular, B= combine A and C, and C= paralell) and five zephyr layers using urea formaldehyde adhesive. They were pressed for 20 min at a pressure of 25 kgf/cm² and a temperature 120 ºC, to a target density of 0.80 g/cm³ and a size of 300 mm X 300 mm X 12 mm. Our results showed that the physical and …

Performance Evaluation Of An Optimized Floating Breakwater In Oblique Waves With A Higher-Order Boundary Element Method, Faisal Mahmuddin, Masashi Kashiwagi

Makara Journal of Technology

In the previous study, the optimal performance of a two-dimensional (2D) floating breakwater shape was obtained. The performance of this shape was also confirmed with a model experiment in a towing tank. Moreover, the shape’s performance in three dimensions (3D) was investigated in a subsequent study. However, to predict the shape’s performance in a real application more accurately, the shape’s characteristics in oblique waves must also be evaluated. In this study, the performance and characteristics of the model (hydrodynamic forces, body motions, wave elevations, and drift forces) are computed using a higher-order boundary element method (HOBEM). The HOBEM, which is …

Position/Speed Sensorless Control For Permanent-Magnet Synchronous Machines, Yue Zhao

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Permanent-magnet synchronous machines (PMSMs) are widely used in industrial applications owing to their distinctive advantages, such as high efficiency, high power density, and wide constant power region. To achieve high-performance field oriented control, accurate rotor position information, which is usually measured by rotary encoders or resolvers, is indispensable. However, the use of these sensors increases the cost, size, weight, and wiring complexity and reduces the mechanical robustness and the reliability of the overall PMSM drive systems. The goal of the research for this dissertation was to develop a rotor position/speed sensorless control system with performance comparable to the sensor-based control …

Memristor-Based Neuron Circuit And Method For Applying Learning Algorithm In Spice, Christopher Yakopcic, R. Hasan, T.M. Taha, M. Mclean, D. Palmer

Electrical and Computer Engineering Faculty Publications

The learning of nonlinearly separable functions in cascaded memristor crossbar circuits is described and the feasibility of using them to develop low-power neuromorphic processors is demonstrated. This is the first study evaluating the training of memristor crossbars through SPICE simulations. It is important to capture the alternate current paths and wire resistance inherent in these circuits. The simulations show that neural network learning algorithms are able to train in the presence of alternate current paths and wire resistances. The fact that the approach reduces the area by three times and power by two orders of magnitude compared with the existing …

Blind Demodulation Of Pass Band Ofdma Signals And Jamming Battle Damage Assessment Utilizing Link Adaptation, Nicholas A. Rutherford

Theses and Dissertations

This research focuses on blind demodulation of a pass band OFDMA signal so that jamming effectiveness can be assessed; referred to in this research as BDA. The research extends, modifies and collates work within literature to perform a new method of blindly demodulating of a passband OFDMA signal, which exhibits properties of the 802.16 Wireless MAN OFDMA standard, and presents a novel method for performing BDA via observation of SC LA. Blind demodulation is achieved by estimating the carrier frequency, sampling rate, pulse shaping filter roll off factor, synchronization parameters and CFO. The blind demodulator's performance in AWGN and a …

Characterization And Performance Comparison Of Low-Voltage, High-Speed, Push-Pull And Traveling-Wave Silicon Mach-Zehnder Modulators, Tristan A. Latchu

Theses and Dissertations

The well-known power and memory walls are recognized as the current bottlenecks in computing performance, and with the increasing computational load of commonly run applications, it is necessary to nd ways to alleviate the issues presented by the aforementioned bottlenecks. It is therefore necessary to not focus solely on extracting performance improvement by way of changes to the processing architecture, but rather by holistically improving the computing platform, namely the communications backbone. This work focuses on the characterization and performance comparison of two families of optical data modulators, both fundamentally Mach{Zehnder modulators (MZMs); namely, a modulator with a Push-Pull (PP) …

Selectively Tuning A Buckled Si/Sio2 Membrane Mems Through Joule Heating Actuation And Mechanical Restriction, Kyle K. Ziegler

Theses and Dissertations

This research followed previous work and attempted to modify the spring in two ways. First, a Ti/Au meander resistor was deposited atop the membrane in an effort to actuate the membrane and change the spring constant. Secondly, a series of overhanging cantilevers were attached to the bulk substrate surrounding the membrane in an effort to constrain the membrane buckling deflection to the negative stiffness region. Membrane buckling was investigated through Finite Element analysis (FEA) and analytical equations. Deflections were measured using an interferometric microscope (IFM) and force/deflection measurements were captured using a unique measurement scheme. The results concluded that by …