Electrical and Electronics Commons^™

An Intelligent Electrocardiogram Tutoring Package Ekgchallenger, Santosh K. Ananthraman

Theses

This thesis presents the development and implementation of an intelligent electrocardiogram tutoring package, namely, EKGCHALLENGER which is meant for use in medical schools to teach medical students a method of diagnosing electro cardiograms.

EKGCHALLENGER is an IBM - PC based, user friendly package. It works in two basic modes. The first is a tutorial mode wherein the user is taught the step-by-step diagnosis of electrocardiograms ( EKGs ) which are presented in order of increasing difficulty. The second is the challenger mode wherein the user is asked to diagnose EKGs which are randomly chosen from an EKG database. The diagnosis …

Performance Enhancement & Fault Detection Of Cmos Dynamic Logic For Vlsi, Ashok Arunachalum

Theses

New CMOS dynamic latches are designed which can be used along with conventional dynamic circuits to realize fast pipelined dynamic logic. Also a new method is described for detecting the difficult CMOS Non-classical faults viz. stuck open and stuck on faults. The conventional Domino logic is redesigned to make all the stuck open and stuck on faults detectable.

Unified Study Of Trellis Encoded Correlative-Fm, K. Narendra Bhat

Theses

Trellis encoding of correlative-FM is studied from the point of view of the overall structure, performance, bandwidth occupancy, and complexity. Here, correlative (partial-response) coding is used to improve the bandwidth efficiency of MSK (Minimum-Shift Keying) at the expense of performance. Then, trellis codes are used to improve the error-rate performance of the corresponding correlative-FM scheme with little or no increase in bandwidth occupancy (compared to uncoded MSK). In a sense, this is similar to Ungerboeck's coding for (memoryless) PSK modulation.

A new encoding approach, called matched encoding, is used here that produces trellis coded modulations achieving greater coding gains than …

Transverse Electric (Te) And Transverse Magnetic (Tm) Mode Conversion In Optically Active (Chiral) Embedded Polymeric Waveguides, Mingdeh Chien

Theses

Wave propagation in an optically active isotropic, polymeric thin film waveguides is studied. The waveguides are fabricated using the dipping method. Thin film layers are composed of a passive PMMA (poly methyl methacrylate) host material and a chiral, optically active, ((s)-(+)-1,1'-Binaphthyl-2,2'-dily hydro phosphate), guest material. Experimental results show about 1° per centimeter rotation of polarization as light propagates through a 1.8cm waveguide. The theoretical analysis of the mode structure and wave propagation in the waveguide are examined using first order coupled mode theory. TE (-4 TM mode converter is a typical application of this investigation.

The Applicability Of Parametric Inverse Scattering For Optical Waveguides With Imperfect Boundaries, Hyoung Jin Choi

Theses

In this thesis, the applicability of an inverse scattering technique for an optical waveguide with imperfect boundaries is investigated. The inversion of imperfect boundaries of waveguides is different from usual inverse scattering algorithms because only eigenmodes can propagate in a waveguide. We suggest a parametric inversion method based on the first-order coupled mode equation. The validity and usefulness of the method are demonstrated using examples of periodic and almost periodic imperfect boundaries.

Implementation Of The Sliding Dictionary Data Compression Algorithm On An At&T Dsp 32 Digital Signal Processor, Shu Fang

Theses

Compared with other data compression algorithms, the sliding dictionary is more practical for implementation in hardware. After a comprehensive study of the algorithm, an on line data compression scheme which uses AT&T DSP 32 Digital Signal Processor has been developed. Assembly language programs for encoder and decoder have been written and tested. The whole compression system has been simulated in a real-time environment and results have been obtained. A quantized coding scheme has been used to increase compression ratio. Separate assembly language programs have been written to implement the quantized coding scheme and tested. Results obtained from real-time simulation are …

A Decomposition Algorithm For The State Transition Lattices Of Certain Non-Product Queueing Protocols, Cheng-Kuo Hong

Theses

In this thesis, an algorithm is developed to decompose the state transition lattice of a class of non-product form queueing models. Here only the lattices of regular type A structure are considered. By applying the algorithm, the lattice is decomposed into solvable subsets which can be solved sequentially.

Csma/Cd Lan Performance : Modeling And Simulation In Csim, Nanda K. Kanuri

Theses

A simulation model to analyze the performance of CSMA/CD protocol is developed. CSIM, a process oriented simulation language, is used. Performance measures such as throughput, average delay and maximum delay per packet are presented. System performance is analyzed for different loads, number of stations, and network lengths, with packet length as parameter. By trading off the throughput and delay time, an optium packet length can be selected from simulated performance curves. A general scheme for MAC protocols modeling is provided.

Output Feedback Applied To Observer Based Controller, Nainn-Ping Ke

Theses

This thesis presented the results of an investigation on the stability robustness issues of the Infinite-horizon linear-quadratic-Gaussian (IH-LQG) control system design methodology. The goal of this research deals with the design of Observer based controller using Output Feedback (00F), and this is a new method to solve estimation problems. The primary difference of this method from others is that the estimator is considered as a system. The results of this research shows that the optimal output feedback control law and the optimal state estimator can be designed by the optimal output feedback control method, and shows that the OOF Weighting …

A Cmos Robotic Lan Interface Integrated Circuit Design, Yong-Bin Kim

Theses

This thesis describes the design including specification, schematics,logic and circuit simulation, and standard cell layout for a CMOS mixed-mode I.C. for interfacing sensors into a robotics local area network. The network accepts up to 256 interface chips as nodes in each area. A simple network protocol permits acquisition of digital data from the interface nodes through gateways into ARCNET and MAP.

The sensor chip interfaces directly from analog signals of range 0-1V and 0-20mV. It contains an 8-bit ADC. The application I.C. interfaces to sensors for pressure, tactile stress, humidity, temperature, etc.

Each of the sensor interface node I.C.s is …

Visual System Modeling And System Response Analysis, Zhongquan Li

Theses

Based on the anatomical structure, a structural model of the visual system was established. System responses of different stimulations were analyzed based on the model. More extensive study was made on the system impulse response. A mathematical model with parameters representing prominent process components was developed to represent the system response in a compact form and the parameters were statistically studied to correlate to the real physiological characteristics of the visual system. The parameters of the model were used to fit the system intensity response function. The result shows that it is a more quantitative way to construct the system …

User Interactive Compensation For Si/So Systems Via Root-Locus, Shih-Mim Liu

Theses

A powerful computer-aided root-locus method is described and applied to the compensation for SI/SO systems. The approach is based on the concept of continuation methods in which the solution of a parameterized family of algebraic problems is converted into the solution of a differential equation and incorporates the quadratic synthetic division technique. The root-locus is obtained in a systematic manner by numerical integration. Breakaway points are analyzed and classified according to the properties of higher order derivatives. A Turbo Pascal(4.0) program which utilizes the algorithm has been written.

Distributed Data Collection System Based On Hierarchical Network, Harish Mahindrakar

Theses

On line data collection systems are essential in order to satisfy the requirements for real-time applications. Typical applications are computer integrated manufacturing, security control, hourly wage calculations, human resources management. On line data collection system makes it possible to closely monitor and track different operations with more accuracy. On line data collection systems eliminate redundant work, save time and money.

If the distributed system is based on a multicontroller, it becomes really cost effective solution to build such a system.

This effort is the design of a distributed multicontroller system, required in a data collection system. A hierarchical network is …

Hardware And Software Designs For Integrated Electrical Engineering Experiments, Sujin Pramojaney

Theses

The interfacing between the various electrical engineering fields is not emphasized in the electrical engineering laboratory; the traditional aim of a laboratory course is to complement a single theoretical course. The object of this thesis is to provide means, hardware and software, that can be used in different system configurations to perform useful industrial tasks. The chosen task is to control electrical machines using a microcomputer. Experiments can be written to be performed by students, using these systems. The emphasize of these experiments can be on the characteristics of a power electronics device, but the device will be seen as …

Network Realizability Approach To Robust Stability Of Discrete-Time Systems Characterized By Polynomials, Sri Indran Rasiah

Theses

In system design, the coefficients of a characterizing polynomial are usually not precisely known but can be bounded from above and below by real numbers. The requirement of robust system design from the stability standpoint demands, then, the guaranteeing of the stability of a set of polynomials.

Stability theorems for continuous-time systems and discrete-time systems, are studied in this report. It is shown that one more condition has to be included into each of the theorem. The revised theorem for continuous-time systems is proved through network realizability theory. The one for discrete-time systems is, then, proved via the use of …

Study Of Ionized Cluster Beam Techniques For Reactive Deposition Of Gallium Nitride Thin Films, Jyh Sheen

Theses

This thesis is divided into two parts. The first part investigates the Ionized Cluster Beam( ICB ) technique through measurements of the energy of ionized gallium beam. The presence of ions and their kinetic energy in the ICB technique is advantageous in the formation process of thin film. The results of retarding potential measurement are comparable with the presence of clusters as large as 500 atoms. The second part examines the formation of gallium nitride thin film. In order to enhance the reaction of gallium and nitrogen, dissociation of molecular nitrogen by microwave discharge method was used to generate atomic …

Firmware Toolkit For Larynx Synchronous D.S.P., Shih-Chieh Su

Theses

During the past ten years, digital signal processing has been an extremely active and dynamic field. Advances in integrated circuit technology and in processor architecture have greatly enlarged the scope of the technical areas to which digital signal processing techniques can be applied. Research in fundamental signal processing techniques and algorithms has led to dramatic improvements in the efficiency of signal processing systems.

This thesis creates a fast and cheap DSP package for 8052AH-BASIC. This is a useful and potential package when we apply research in speech science and medical diagnostics. It exploits the latest software-in-silicon technology to create a …

Design Of Governor-Turbine Models In Stability Studies, Vidyanand Swaminathan

Theses

This thesis investigates the effect of hydro governor-turbine models on the steady state stability of an automatically controlled electric power system. Basically two kinds of hydro governor-turbine models, namely, Impulse and Francis type are studied in depth. Design of a compensating network has also been proposed, which can help improve the stability conditions of a power system which employs a poor governor-turbine model.

The power system investigated includes a large sized hydro generating unit connected to an infinite bus via a power network. This generator employs a modern three-channel fast-acting automatic voltage regulator (AVR). For any operating condition, stability results …

Reduced Complexity Receivers For Trellis Coded Modulations Via Punctured Trellis Codes, Bonchul Koo

Theses

We introduce a new concept, called matched punctured trellis encoding, that simplifies the complexity of Maximum Likelihood Sequence Estimation (MLSE) receivers for combined trellis encoding and modulations with memory. Matched punctured trellis encoding is applied to tamed frequency modulation (TFM) which is a bandwidth efficient correlative - FM scheme. TFM finds applications in satellite, microwave radio, and mobile communications.

Our approach is based on puncturing a rate - 1/2 matched convolutional code to obtain a rate - 2/3 mismatched code. A matched code is one that produces trellis coded modulations of minimum complexity. Puncturing these codes to obtain mismatched codes …

Computer Controlled Oxygen Bioreactor, Dinesh Sachdeva

Theses

A computer controlled oxygen bioreactor has been designed to obtain more accurate values for oxygen bioreactor requirements and to optimize oxygen productivity with respect to oxygen concentration. This study solves a specific problem relating to oxygen concentration measurement and bioreactor control. The proposed reactor system is computer controlled to insure a desired oxygen concentration supply to an oxygen consuming reaction or organism. This thesis also explains and illustrates the bioreactor and its computer control system.

The computer controller incorporates oxygen sensing, oxygen measurement and temperature measurement, Electrical circuits have been designed and built for proper signal conditioning, data acquisition, data …

Image Coding With Switchable Dynamic Quantizers, Shing-Sun Yu

Theses

In this thesis, an image coding scheme based upon dynamic quantizations and Differential Pulse Code Miodulalton (DPCM) is studied for application in digital image transmission. This scheme achieves a degree of data compression, and at the same time, maintains an acceptable degraded Mean Square Error (MSE) in the reproduced image. The image to be transmitted is first divided into blocks and each block is then quantized before transmission. The dynamic quantizations including DPCM) are dynamically utilized in reducing the transmission rate while maintaining a desirable quantization noise level. Results of computer simulation of the proposed scheme demonstrate that the switchable …

Caldac, A New Approach To Computer-Assisted Theatrical Lighting Design, David William Zalewski

Theses

CALDAC, which stands for Computer-Assisted Lighting Design and Control, is a design environment integrating two present day state-of-the-art theatrical lighting computer aides, the computer-aided design (CAD) program and the preset storage system. The CALDAC environment also features On-Screen Stage Simulation, a newly proposed design tool. It is shown that this integration offers a strong advantage to the lighting designer and his/her crew.

The thesis begins by introducing the concepts of theatrical lighting design and the evolution of computerized control. The basics of CAD for the lightplot design are presented, followed by an introduction to the concepts of on-screen stage simulation. …

Spectrum Analysis Of Heart Rate Variability, Xuming Wang

Theses

This research investigated the respiratory influence on heart rate variability. The heart rate spectrum was obtained from the heart rate variability signal which was extracted from the electrocardiogram We then studied the magnitude of the respiration peak in the heart rate spectrum and examined the dependence of the magnitude of this peak on breathing frequency, subject and day.

An experiment designed to simultaneously acquire the electrocardiogram and the respiration signal was conducted on ten people ranging from 22 to 55 years of age (3 females, 7 males). Three tests were performed on each subject. In each test, 2 different postures …

Non Invasive Monitoring Of Cardiovascular Dynamics Through A Microwave Interferometer, Suresh Chakravarthi

Theses

The microwave interferometer is utilized to pick up vibrations of the anterior (front) chest wall, produced by cardiac activity. This instrument is capable of remotely measuring the vibrations at distances up to four feet through clothing, by using low level microwave energy at 9.3 Ghz. The vibrations picked up from subjects are filtered, and processed through a PC to correlate with EKG signals, and thereby evaluate the instrument as a non-invasive, non-contacting cardiac monitor.

The subjects lie on their back with the microwave energy illuminating their chest, and their cardiovascular dynamics are recorded simultaneously with EKG signals. The EKG is …

One-Dimensional Parametric Inverse Scattering For Lossless Dispersive Media, Frank Gangi

Theses

In this thesis, the effects of high frequency noise on a perturbational inversion algorithm for a stratified dispersive medium are investigated. It is shown that the perturbational algorithm becomes unstable under high frequency noise. The physical origin of this instability is discussed.

In order to enhance the robustness of the perturbational inverse scattering solution, a parametric inversion algorithm is implemented. The improvement by the use of a parametric inversion is given quantitatively by the profile-to-error ratio (PER). Examples of the two-pole and the three-pole reflection coefficients are compared and contrasted.

Adaptive Subband Video Coding With Motion Compensation, Manjunatha S. Kadur

Theses

An efficient scheme for video sequence coding is presented here. The interframe redundancy present in the video sequence is exploited by motion compensation using the efficient independent orthogonal search technique, which requires least number of computations in the worst case. The motion compensated frame difference signal is encoded with a new technique — subband adaptive vector quantization.

Subband coding like transform coding results in signals of unequal energy patterns, which is efficiently utilized for bit allocation. In addition, the subband approach offers means for efficient (but suboptimal) Vector Quantization (VQ) by splitting the signal into several signals. By rate distortion …

Study Of System Dynamics In A Primitive Identification/Counter Model, Zofia Monczka

Theses

Previous study of a simplified identification/counter model (1), (2) indicated bifurcations in its behavior. In order to study this topic, graphical representations of the system dynamics are derived. Analysis of the structure of the identification/counter model reveals the reasons why the graphs assume their given shapes.

The graphical representations of the system are used to characterize the system behavior and thus explain the bifurcations previously encountered. These representations are then used as the basis for deriving a general model for system behavior. Analysis of this model for a specific range of parameter values indicates that the system contains numerous additional …

A Dynamic Cmos Programmable Logic Device, Praveen K. Parvathala

Theses

This thesis presents the design of a Dynamic CMOS Programmable Logic Device chip (NJIT PLD). The main feature of the chip is its reconfigurability and the provision of a processor interface which makes the chip capable of performing coprocessor like functions. The chip has been designed to be used with the Intel 8088 microprocessor, but may also find stand-alone applications. Provision is made for dynamic reconfiguration of the chip. The configuration data for the chip comes from a serial PROM, to which the chip sends a synchronizing clock. The NJIT PLD is a high performance, digital integrated circuit. It has …

Nonlinear, Metal-Clad Optical Waveguide, Bhavesh Patel

Theses

Planar optical waveguides consisting of different types of films including nonlinear films with metal cladding have been studied theoretically. Ideal metal cladding with σ = ∞ and nonideal metal cladding with σ ≠ ∞, that is, with complex refractive index is considered to get electric field and wave number for TE₀ mode. For nonlinear material, approximate solution is derived in a series form using Rayleigh-Schrodinger method. The appropriate eigenvalue equations are solved by Newton-Raphson iteration method. For self-focusing media in the center, the propagation constant increases with increasing power and with self-focusing media in the cladding the propagation constant …

Efficient Design Of Trellis Coded Cpfsk, Hsinhsyong Yang

Theses

In this thesis convolutional coded continuous-phase frequency shift keying (CPFSK) is studied.

CPFSK which is a subclass of continuous phase modulation ( CPM ) is a constant amplitude digital modulation scheme with very good spectral characteristics.

A new method, called matched encoding, that combines convolutional codes and CPFSK is studied. With the maximum free Euclidean distance as the optimization criterion, the best combined coded schemes were found for the same rate of the codes and given total number of states in the optimum decoder.

A different method which was suggested by Rimoldi[7], called the decomposition method, is also described in …