Electrical and Electronics Commons^™

Multaid, A Consultant For Multi-Microprocessor Network Selection, Bernabe Javier Arruza

Theses

A knowledge based system has been developed to enable an architectural designer to select an adequate interconnection network to be utilized in a parallel or distributed processing system. It is implemented using the Knowledge Engineering Environment, K.E.E., package from IntelliCorp.

The user will interact with the system through symbolic representation. From the selected symbols, the knowledge base system will identify the most appropiate network for the given application. The system will display the network topology along with all the information and results of all pertinent calculations corresponding to the given network. The program will also display the rule driven search …

Digital Network Implementation By Xilinx Asic Technology, Maoling Shen

Theses

Using XACT(XILINX Advanced CAD Technology) to implement a digital network, which is used in an 8052AH-BASIC single board computer system as one of its interfaces called MIDVOX.

MIDVOX comprises of three major parts.

1. Voice Detector

2. Waveform Generator and Frequency Divider

3. Signal Processing and Storing Unit(PSU)

Digitized voice signals are inputed to the network as BEG. Their periods are then counted by a 12 bit binary counter. Finally they are stored into memories by means of a series of 12 bit binary numbers. The value of the number depends on the length of a period of that particular …

Multichannel Priority Interrupt System, Claudio Bernal

Theses

There is in our current industrial milieu an increasing demand for systems capable of detecting and processing a large number of analog signals for the computer.

The present work offers an approach for a multichannel real time acquisition system which will find a wide variety of applications in machine automation, process control, musical instruments, remote sensing, etc.

The system presented in this thesis follows traditional instrumentation architecture and implements that architecture around the latest microcontroller, the 8052. The system, capable of assigning a processing priority to a large number of incoming events, is demostrated for 40 channels. It is fast …

The Switch Capacitor Biquad Filter And It's Application On Active Filter Design, Sung-Chiang Chang

Theses

The purpose of this subject is to use the programmable switch capacitor filter to design a traditional analog filter which usually cause a tedious job on finding a group of values for resistors and capacitors. We start from the basic concept of switch capacitor, then we learn to use auxiliary equipment to design a filter. To design the desired filter, first, we have to find the s-domain transfer function, then transfer it to the z-domain. After we found the coefficients of z-domain transfer function, we have to implement this on the auxiliary equipment. Then we will get the desired filter.

8085 In-Circuit Emulator For Ibm Personal Computer, Joong Bin Lee

Theses

As microprocessor-based systems become gradually larger, the developers need good tools for debugging the hardware and software. The emulators for the IBM Personal Computer using an RS-232 serial port are available in the market. But it takes quite a long time to download the user file to the memory of the emulator or the target system. This emulator is an add-on card dedicated for IBM Personal Computers. The emulator communicates with the IBM Personal Computer through the I/O channels on the mother board instead of the serial port, so its speed is much faster than that of the serial port. …

Fault Location And Control Optimization Planner (Expert System Approach), Fenil Shah

Theses

FALCON is a rule based expert system designed to control a process being regulated by "intelligent" controllers which would at each time and stage execute a series of diagnostic or decision tests and only then initiate a control action identified by the process engineer. The current implementation includes fault identification, diagnostic and process settings in case of low efficiency and poor quality in the product. This research is a part of large research project in flexible manufacturing.

The system is intended to grow into a complete diagnostic master and take corrective actions with the help of the operational personnel.

FALCON …

Liquid Crystal Display And Thermal Printer For A Single Board Computer, Shenq Jyi Wang

Theses

This thesis deals with the installation of a LTP451 printer mechanism (LTP) and a Dot Matrix Liquid Crystal Display module (LCD) in a SINGLE BOARD COMPUTER (SBC). The communicative method between SBC and LTP is serial, but that between LCD and SBC is parallel.

The Evaluation Of The Ti-Speech System On Pc Computer, Ying Wu

Theses

A PC-TI-SPEECH system has been set up by the author of this thesis on the IBM PC/AT compatible computer. The basic functions of the system are as follows: data acquisition, internal signal synthesization, signal processing and speech recognition. The system is built up by a PC, TI-Speech Hardware kit, MADCAP software package,TI-Speech Tool kit. This thesis covers the setup, evaluation and operations of the complete PC-TI-SPEECH system, development of the system for further applications, and operations of running some evaluation programs generated by doing this thesis.

A Modified Extended Kalman Filter As A Parameter Estimator For Linear Discrete-Time Systems, Bruno Johannes Schnekenburger

Theses

This thesis presents the derivation and implementation of a modified Extended Kalman Filter used for Joint state and parameter estimation of linear discrete-time systems operating in a, stochastic Gaussian environment. A novel derivation for the discrete-time Extended Kalman Filter is also presented. In order to eliminate the main deficiencies of the Extended Kalman Filter, which are divergence and biasedness of its estimates, the filter algorithm has been modified. The primary modifications are due to Ljung, who stated global convergence properties for the modified Extended Kalman Filter, when used as a parameter estimator for linear systems.

Implementation of this filter is …

Microprocessor Controller For A Multi-Targets System, Shoeineng Lin

Theses

This thesis presents a microprocessor controller for a multi-targets system, which is designed by a direct digital control in the modern computer-aided manufacture system. It is made up of digital control theory, computer hardware configuration and software algorithm. An example is illustrated by IBM PC/XT computer. In this example, the control laws of three simple targets are developed and implemented by C-language. Simultaneously, the computer self-test routines, such as CPU, ROM etc, are developed by intel-8088 assembly language.

Interfacing Of The Digital Spyghnomanometer [Sic] Ds-165 To The Intel 8052ah Basic Based Single Board Computer, Rakesh P. Patel

Theses

The aim of this thesis is to collect the measured data from the blood pressure measurement unit to the single board computer and to store the data for the analysis purposes.

Testing Of Ultrasonic Bonding In Microcircuits, Ioannis Andrea Phiniotis

Theses

A model for the ultrasonic bond as used in making microcircuit interconnections was studied. This model was based on Bowden & Tabor's dry friction theory and Mindlin's analysis of Hertz's model for elastic deformation under compressive and shear stresses. To develop a well-controlled bonding system, the critical bonding machine parameters were determined, and a high-frequency capacitor microphone was fitted to the bonding machine to monitor the tool tip oscillation. Application of these techniques made it possible to control the parameters of the machine to ±5%. Flip-chip bond studies were made using this machine. The data obtained were consistent with the …

Computered-Aided Digital Filter Design And Simulatio, Pao-Tsan Chiang

Theses

The simulation is written by C language on AT&T Unix pc 7300 environment, some fundamental mathematics is introduced in the beginning, then digital filter specification method: window, frequency sampling, equiripple are discussed, and Kaiser window method is discussed in details for programming.

There are many problems are met in my simulation, such as F.F.T. aliasing, leakage, Picket fence convolution, correlation, but solutions are proposed.

The result could be output data and graph, GSS_Drivers graph package is utilized, because consideration of operation speed and convenience are emphasized, speed is compromised, but easy to be restructured.

A Dsp Toolkit For The Unix/C Environment Of The Pc 7300 Compute, Suwutchai Jesdanun

Theses

The Digital Signal Processing (DSP) TOOLKIT is a package of programs designed to use the fast Fourier transform (FFT) and display its output responses in graphics form. This tool provides three different window functions and five data modifiers for filter designing and spectrum analysis. Flexible features for modifying the plottings, such as y-axis auto-scaling, xy-axis scaling and center line adjusting of the graphics display, are included.

All programs are written in C programming language for the UNIX System Environment of the UNIX PC 7300 computer. The program structure of DSP TOOLKIT is designed so that modules can be added or …

An Investigation Of Electrical And Optical Properties Of Sputtered Amorphous Silicon Nitride And Germanium Thin Films, Rajendra S. Khandelwal

Theses

Low temperature preparation of thin amorphous Silicon Nitride and Germanium Films by direct RF sputter deposition was investigated. Influence of various sputtering parameters on film properties was studied. Infrared transmission spectrophotometry was used to evaluate optical properties of the films whereas electrical characteristics of the films were determined from current-voltage measurements of MIS structures. For Silicon Nitride films it was observed that the stoichiometry, as indicated by the IR transmission, dielectric constant and current density versus square root of electric field measurements, was a strong function of the sputtering gas composition and particularly the Ar/N ratio in the sputtering gas. …

Hardware Based Data Compression System Using Sliding Dictionary Algorithm, Hemant L. Nerurkar

Theses

Popular data compression schemes found in the literature are software based and present innumerable difficulties in hardware implementation. A data compression scheme, which can be directly implemented in hardware using systolic arrays, has been described. The scheme has a remarkable ability to 'adapt' itself to the changing statistics of the source file. Results generated after a comprehensive study and simulations of the algorithm have been presented. The scheme is inherently suitable for parallel processing. It can be incorporated in transmitting devices since it can be fabricated on a single VLSI chip. Comparison has been made with the LZW scheme. A …

Analysis Of An Inertial Navigation System On A Silicon Wafer, Ashok K. Parida

Theses

This thesis describes a self-contained inertial navigation system for commercial vehicles. It is low cost miniature system employing some of the newest techniques in micromechanical and microelectronic hardware.

The system employes an array of vibrating tuning fork gyros, a number of feedback force-balance accelerometers, and a central processing unit, all fabricated on a silicon wafer using integrated circuit fabrication technology. A miniature platform (size of a golf ball) driven by gearless torque motors is used to provide a quiet environment for the gyros and accelerometers. There are radio links between components that are on and off the platform (eliminating need …

Probabilistic Technique In Power Flow Analysis, Dun-Ren Tzeng

Theses

This thesis describes and examines a technique which permits the power flow problem in a power system to be analyzed probabilistically. Both the deterministic and the probabilistic power flow theories have been presented. A mathematical model and a program have been developed to carry out the probabilistic power flow calculation. Two power systems and seven different loading cases have been used to test the technique. The results including the sensitivity coefficient matrices, the expected line flows with their variances, and 25 of 176 probability density function curves, have been shown and discussed. An easy way to predict the possible abnormal …

Method Of Moments Analysis Of Very Thin Wires Using The Mini-Numerical Electromagnetics Code, Douglas F. Stolarz

Theses

The analysis of thin wire antenna systems in the presence of a conducting ground plane is an important engineering problem. This thesis presents an analysis of wire radiators using the method of moments as implemented in the Mini-Numerical Electromagnetics Code (MININEC). Due to singularities in the formulation, MININEC yields inaccurate results for very thin wires. This code was modified by introducing filament currents for very thin wire structures thereby eliminating inaccuracy due to the treatment of singularities.

The modified code was tested on a monopole over a perfect ground, symmetrical and asymmetrical dipoles in free space, and inverted L and …

Time Series Analysis Of Respiration Component In Heart Rate Variability, Anuradha Ramaswamy Iyengar

Theses

Time series signal processing techniques (Fourier based) were applied to analyze the relationship between heart rate and respiration. This analysis takes advantage of the different timing charecteristics of the autonomic nervous system inputs to analyze their influence on the heart rate.

Data from three experiments were analyzed. The first set of data was from helicopter pilots of the US Army. They injected atropine into themselves on certain days. The effect of atropine on the heart rate spectrum and the relationship between heart rate and respiration was studied. It was found that atropine abolishes the respiration peak in the heart rate …

Properties Of Sputtered A-Ge And A-Ge : H Thin Films, Hanjin Cho

Theses

The effect of the amorphous and glassy structure of amorphous germanium films on their electrical characteristics was investigated experimentally. The films were deposited onto silicon substrates using a modified MRC 8800 triode sputtering system. The Poole-Frenkel and Schottky mechanisms are discussed in detail and the shortcomings of the accepted picture of the former in amorphous materials are dealt with. It was concluded on the basis available evidence that the current flow in amorphous germanium favors the Poole-Frenkel mechanism at high fields.

Amorphous hydrogenated germanium films which were deposited by bias sputtering were characterized by measuring the infrared absorption. The films …

A Computer-Aided Design And Manufacturing System For Wiring Boards Production, Shiau Chia-Ming

Theses

Our purpose is to build some SBC-8052-BASIC microcontroller based instrument systems, and this thesis integrate resources from two areas into a powerful CAD/CAM system for this purpose. Since wiring board is the most popular used tool for laboratory development and small-scale manufacturing, a microcomputer-aided design and manufacturing system is developed to improve the whole efficiency from wirelisting and wiring sequences to hardware and software debugging. So anytime a circuit theory design stage is finished, the prototype can be made easily, then tested and redesigned, till last stage producing. Several practical wiring board circuits have been made through this system, it …

Microcomputer-Based Automated System To Monitor Flow And Respiratory Quotient, Chung C. Chien

Theses

An instrument system has been designed to monitor Respiratory Quotient experiments on rats which are living within whole-body calorimeters. By using multiplexing techniques, this system is capable of monitoring Respiratory Quotients in six calorimeters (animal chambers). It exhibits some features that make it more versatile than the previous system. One of the features of this instrument is that it uses a more accurate method of determining rapid changes in gas exchange between subject and environment. The value of this method is its ability to assess the rapid change in metabolic rate which occurs as a result of change in activity, …

A Data Compression System Using Arithmetic Code, Seokrim Choi

Theses

Generally it is difficult to compress data, from statistically unknown sources, with significant compression ratio. To achieve this, the compression scheme should have an ability to gather context information of the source, adaptively. For better compression, it is desirable to separate the context gathering scheme from coding itself. Arithmetic code is very flexible and can accept any kind of context gathering scheme which can generate probabilities. One context gathering algorithm which generates Markov type probability adaptively is studied and implemented in software using Arithmetic code. This scheme performs well and results in compression ratio better than any existing algorithms such …

Ksc2408 Digital Filter Evaluation System For The Ecg, Chi-Tong Chung

Theses

A hardware implementation in digital filters by using the high speed and high precision KSC2408 digital filter chips, demonstrates the power of the KSC2408 and proves that the real time digital filters can be implemented without complex circuitry and without high expense.

The system consists of two parts - the digital filter board and the IBM PC; the former handles the data filtering, the latter handles the analog-to-digital data conversion and data display. The KSC2408 is programmed as a 16th order Butterworth digital filter to have flat response in the passband and good attenuation in the stopband.

Reliability Evaluation Of Liquid Crystal Displays Under Accelerated Life Conditions, Rajkumar Krishnamoorthy

Theses

This Thesis shows method of comparing the reliability of Liquid Crystal Display Devices by means of accelerated life testing at elevated temperature and relative humidity for two different vendors.

The tests were carried out at three different combinations of temperature and humidity.

1. 77°±1° C and no added humidity.

2. 85°±1° C and no added humidity

3. 98°±1° C and 98+2% relative humidity.

Leakage current measurements were carried out after every 1000 hours for up to 5000 hours for vendor no.l. Measurements were carried at 0, 500, 1000, 2000, 3000 and 5000 hours for vendor no.2. A DC bias of …

Image Analyzing Instrumentation System For The Activity Measurement Of Rats, Yun-Kang Li

Theses

A microcomputer based instrumentation system has been developed to measure the activity of rats in 12 metabolic chambers. The instrumentation system monitors the rats' behaviors and estimates their activity continuously in an automatic manner. The activity information of the rats are expressed by a quantitative index which describes the intensity of the activity level.

An Apple II microcomputer system is used to manage the activity measurement which consists of an image recording operation and an image analyzing operation. During the measurement, the microcomputer controls Optic RAM digital cameras to record the rats' image. The camera can take a digital picture …

Mizer : A Ruled Based Cad Tool For Logic Optimization, Sandip Mukerjee

Theses

This objective of this research was to develop a knowledge based CAD tool, to address the problems of Logic Design. MIZER is an expert system, that accepts functional specifications of a logic circuit and connectivity description of its implementation to generate an optimal design. This information is then used to develop a hazard free circuit that brings about an optimization in area and timing. It stores the newly created design into its knowledge base with the approval of the designer, for future use.

Investigation Of The Size Of Gallium Clusters Formed Using A Modified Ion Cluster Beam Source With A Crucible Temperature Of 1250 Degrees C, Sujit M. Shah

Theses

Energy analysis of the ionized gallium clusters was done by retarding field method. The objective of this research was to investigate the possibility of gallium cluster formation during nozzle jet expansion and to estimate the probability of ionization of clusters. The measurements at a crucible temperature of 1250°C corresponding to gallium vapor pressure of 0.23 torr (inside the crucible) showed that no large cluster sizes could be obtained. The relationship between mass deposition rate (atoms/cm2-sec) and cluster size (atoms/cluster) showed that there were two distinct peaks. One with a cluster size of 1 atom/cluster and the other with about 13 …

Graphical Interpretation Of U.S. Tidal Data, Vaheh Shahbazian

Theses

Numerous Shore line operations relating to industry and conservation would benefit from convenient access to continuous tidal predictions. Easy Graphical access to continuous long term predictions of tidal heights at a location of interest will simplify operations that are sensetive to tidal predictions. A specific example, is the implementation of a protective measurements against flooding and destruction of shoreline facilities particularly at times of high tides.

This thesis consists of three things. First, rendering NOAA's data in a form accessable to a PC user. Second, it provides a Basic program for prediction of tides. Third , PC user programming Resourses …