Electrical and Electronics Commons^™

Orthogonal Space Time Coding For Im/Dd Optical Wireless Communication With Single Carrier Frequency Domain Equalization, Nan Wu

Theses

Recently the development of optical wireless communication has received growing attention because of its unlimited bandwidth and simple implementation as compared to radio frequency communication application for indoor wireless data transmission. The objective of this thesis is to improve the performance of intensity-modulated direct- detection (IM/DD) optical wireless communications with single carrier frequency domain equalization (SCFDE) by using Orthogonal Space Time Code (OSTC). More attention has been paid to three SCFDE schemes due to their outstanding performances in practical cases. It is demonstrated that OSTC can be modified to be suitable to optical systems and provide an excellent enhancement to …

Digital Image Forensics, Fei Long

Theses

Digital image forensics is a relatively new research field that aims to expose the origin and composition of, and the history of processing applied to digital images. Hence, the digital image forensics is expected to be of significant importance to our modern society in which the digital media are getting more and more popular. In this thesis, image tampering detection and classification of double JPEG compression are the two major subjects studied. Since any manipulation applied to digital images changes image statistics, identifying statistical artifacts becomes critically important in image forensics. In this thesis, a few typical forensic techniques have …

Design And Evaluation Of An Adaptable Vector Coprocessor For Multicores, Timothy William Steele

Theses

Future applications for multi-core processor systems will require increased signal processing power along with increased resource utilization and decreased power consumption. Conservative power consumption will be of paramount importance primarily for battery-powered portable multi-core platforms (e.g., advanced cell phones, tablet computers, etc.). This thesis investigates the robustness, efficiency and effectiveness of vector coprocessor sharing policies in multi-core environments. Vector coprocessor sharing is based on an innovative design for a vector lane that forms the building block for the creation of larger vector coprocessors. This innovative lane design contains a floating-point multiply unit, a floating-point add/subtract unit, a miscellaneous function unit, …

Protection Of Embedded Systems For Applications Involving High Loading Rate Mechanical Forces, Amjad Alsakarneh

Theses

This thesis describes the development of a methodology to optimise the dimensions and mechanical properties of force-absorbing layers surrounding miniaturised embedded electronic modules subject to high mechanical compressive/impact forces and vibration. While much has been published on the mechanical protection of electronic systems in larger scale applications, where traditional mechanical shock absorbers and springs can be used to protect the electronics, little has been published on the mechanical protection of miniature electronic modules embedded in smart structures and materials where traditional methods of mechanical protection are not feasible. The generalised system concept used in this thesis is of module encapsulation …

Power Cable Fault Finding Using Pseudo Random Binary Sequences, Holger Geisler

Theses

The work that is presented in this thesis documents the results obtained from the pseudo random binary sequence (PRBS) cable testing method which utilises a pseudo noise (pN) sequence as a test stimulus to localise faults on a transmission line. The work targets the proof of concept of the PRBS method in a Coaxial cable as well as its eventual evaluation for fault testing accuracy and performance on a real-world underground steel wired armour (SWA) cable. Further, a novel hardware implementation of the method utilising a Field Programmable Gate Array (FPGA) is presented. The theory of the PRBS test method …

Ultra Wideband Pulse Shaping, Pawel Rulikowski

Theses

Methods for shaping of sophisticated, transient, ultra wideband (UWB) waveforms and pulses are presented. The methods include novel circuits based on step recovery diodes (SRDs) and quasi-transversal filter concepts but the majority of the work focuses on UWB pulse shaping using completely passive nonuniform transmission lines (NUTLs). It is shown, for the first time, that NUTLs can be used to generate highly sophisticated arbitrary UWB pulse shapes, including modified Hermite polynomial (MHP) and approximate spheroidal wave function (APSWF) pulses which are not known to have been previously generated in practice, and a generalized methodology, verified by experiments, for design of …

Miniature Embedded Module For Prognostic Health Monitoring (Phm) Of Electronic Systems, Liam Moore

Theses

Sensing systems for reliability prognostics are used extensively in life- and mission- critical electronics systems. They allow monitoring of reliability stresses in real time and scheduling of preventative maintenance before system failure. However, reliability prognostics systems are, in general, large and expensive and cannot be used in lower cost, small sized or portable products.

This thesis presents a sensing module for reliability prognostics which is only 1cm in volume and uses only commercial off-the-shelf components. In its 1cm package, the module combines all the necessary elements to act as an embedded prognostic sensor system for multi axial strain, vibration, humidity …

Power Flow In Railway Electrification Power System, Sisi Li

Theses

This thesis discusses aspects of the design of the railway electrification system (RES) and in particular the electric distribution system for a 2x25 kV railway power system.

The analysis of Railway Power Supplies (RPS) presents a unique type of load flow problem which is characterized by its constant moving loads, dynamically changing load types (constant current/constant power), and its specialized network structure. The autotransformer power supply system with double track was the system studied in this thesis.

The details of the system studied were provided by Caltrain (California Commuter Rail) for a planned high speed extension to Caltrain system. A …

A Study Of Probability Distributions Of Dct Coefficients In Jpeg Compression, Gopal Thirumalai Narayanan

Theses

The Discrete Cosine Transform (DCT) used in JPEG compression has shown excellent energy compaction properties that rival that of the ideal Karhunen-Loève Transform. Lossy compression in JPEG is achieved by distorting 8x8 block DCT coefficients through quantization. It has been shown in literature that DC block DCT coefficients are Gaussian probability distributed and AC block DCT coefficients are Generalized Normal probability distributed.

In this investigation, three probability density models for individual modes of non- quantized AC block DCT coefficients are evaluated and are used as basis for the derivation of probability distributions for quantized block DCT coefficients. The suitability of …

Study Of Methods To Predict Voltage Collapse, Niki Patel

Theses

One of the problems that must be addressed for a secure power system operation is the voltage collapse problem. The ever increasing size and connectivity of the power grid have lead to making the problem more multifarious. Widespread blackouts, similar to the one that occurred in the northeast in August 2003, could result from failure to address the problem.

This thesis presents an overview of the voltage collapse problem and reviews some existing methods to calculate voltage collapse indicators.

Thevenin and Maximum Power Transfer Theorems are used to provide indicators of the proximity of the system to voltage collapse. The …

Papr Reduction In Ofdm Communications With Generalized Discrete Fourier Transform, Sertac Sayin

Theses

The main advantage of Generalized Discrete Fourier Transform (GDFT) is its ability to design a wide selection of constant modulus orthogonal code sets, based on the desired performance metrics mimicking the engineering specs of interest. One of the main drawbacks of Orthogonal Frequency Division Multiplexing (OFDM) systems is the high Peak to Average Power Ratio (PAPR) value which is directly related to power consumption of the system. Discrete Fourier Transform (DFT) spread OFDM technology, also known as Single Carrier Frequency Division Multiple Access (SCFDMA), which has a lower PAPR value, is used for uplink channel.

In this thesis, the PAPR …

A Comparison Of Software Engines For Simulation Of Closed-Loop Control Systems, Sanket D. Nikam

Theses

A wide array of control system design and simulation software engines is available in market. It includes MATLAB-Simulink, LabVIEW, Maple-MapleSim, Scilab-Scicos, VisSim and Mathematica-Control Professional Suite (CPS). Among all of them MATLAB-Simulink is dominant and widely used software engine. The main aim of this study is to implement different state space control methods for non-linear Furuta pendulum system in each one of them and to compare performance against MATLAB-Simulink.

Different parameters like learning curve, interoperability, flexibility, control design tools, documentation and tech support are considered for efficiency comparison. It is shown that MapleSim has multi-body intuitive physical modeling (acausal) approach …

A Fpga/Dsp Based Ultrasound System For Tumor Detection, Ashish Ravindra Ratnakar

Theses

This work presents a method of detection of size and location of tumor using ultrasound transmission. The system utilizes Quantitative Ultrasound (QUS) which means sending an ultrasound signal from a transmitter and receiving it at multiple receivers. This received signal is analyzed for echogenic as well as echolucent tumors to differentiate between the two along with non-tumorous sample and also for delay, signal distortion to determine the size/location of the tumor.

This analysis is further implemented using Field Programmable Gate Array (FPGA) and Digital Signal Processor (DSP) technologies. The proposed detection system utilizes Low Transient Pulse (LTP) technique. In this …

A Fpga/Dsp Design For Real-Time Fracture Detection Using Low Transient Pulse, Akash Mathur

Theses

This work presents the hardware and software architecture for the detection of fractures and edges in materials. While the detection method is based on the novel concept of Low Transient Pulse (LTP), the overall system implementation is based on two digital microelectronics technologies widely used for signal processing: Digital Signal Processor (DSP) and Field Programmable Gate Array (FPGA). Under the proposed architecture, the DSP carries out the analysis of the received baseband signal at a lower rate and hence can be used for large number of signal channels. The FPGA's master clock runs at a higher frequency (62.5MHz) for the …

Sparse Representation For Audio Noise Removal Using Zero-Zone Quantizers, Neha Mittal

Theses

In zero zone quantization, bins around zero are quantized to a zero value. This kind of quantization can be applied on orthogonal transforms to remove the unwanted or redundant signal. Transforms reveal structures and properties of a signal and hence careful application of a zero zone over the transform coefficients leads to noise removal. In this thesis, such quantizers are applied over Discrete Fourier Transform and Karhunen Loeve Transform coefficients separately, and outputs compared. Further, the localization of the zero zones to certain frequencies leads to better performance in terms of noise removal. PEAQ (Perceptual Evaluation of Audio Quality) scores …

Non-Foster Matching Of An Rfid Antenna, Nedime Pelin Yalcin

Theses

In this thesis, novel designs of radio-frequency identification (RFID) tag antennas with better matching characteristics to achieve extended range for passive tags have been investigated in the ultra-high frequency (UHF) band. A variety of cavitybacked/coupled microstrip dipole antennas in 915 MHz range were considered. Additionally, a negative impedance converter designed to cancel out antenna's input capacitance at resonance frequency and to produce the real antenna input impedance was designed, simulated and implemented for an RFID antenna. Numerical simulations have been carried out using ORCAD software package (Cadence), ADS software package (Agilent) and HFSS software package (ANSYS/ANSOFT Inc). Antennas have been …

Nano-Structured Platforms As A Spectroscopic Tool, Ruiqiong Li

Theses

Nano-structured platforms have been studied for the purpose of enhancing weak fluorescence signals. Each platform was constructed as a thin oxide layer on top of a metal (aluminum) The oxide was perforated with hexagonal array of nano-holes. The pitch of the array was much smaller than the optical wavelengths used. Surface charge waves (Surface Plasmons) could be excited when the platform was oriented at specific direction with respect to the incident optical beam. At this point one can demonstrate that fluorescence signals could be amplified. Since the oxide (alumina) is bio-compatible, one can envision using such platforms in the study …

Renovating A Control Engineering Laboratory For Enhanced Learning, David Hamilton

Theses

In an attempt to both place the student at the centre of the learning process and thus improve student engagement with the discipline, and to incorporate professional skills into the engineering curriculum at the module level, an enquiry based learning (EBL) component to enhance teamwork, problem solving skills and the student’s ability to learn independently was developed using current best practice in teaching and learning. As EBL is not widely used in engineering curricula in CIT, a pilot scale three week trial was performed during the academic year 2007-08 to evaluate the appropriateness of the pedagogy and student reactions to …

Rf Mems Capacitors For Sdr, Yamuna Kuberappa

Theses

Micro electro mechanical systems (MEMS) applications in radio frequency (RF) and microwave electronics are revolutionizing the progress in wireless communications. In particular, MEMS switchable/tunable capacitors can facilitate the realization of multistandard software defined transceivers, offering better performance than existing solutions.

In this thesis, characterisation and RF modelling of MEMS switchable/tunable capacitors and the technical requirements for their application in multiband wireless transceiver circuits in a software defined radio (SDR) are described. The first device considered is a curled cantilever capacitive switch, configured in both shunt and series configuration where the capacitance is limited to two stable states. The second device, …

A Middleware For True Mobile Agents In Wireless Sensor Networks, Ciarán Lynch

Theses

The application space of wireless sensor networks has evolved considerably from their initial role as an efficient data gathering system. Modern wireless sensor networks are expected to be dynamic, powerful. reliable and flexible, while continuing to operate efficiently and autonomously. The supporting software' systems have not kept pace with this development, and currently limits the deployment of complex and robust applications. Mobile software agents present a powerful approach to application design, however no existing middleware for wireless sensor networks supports native mobile software agents.

The main contribution of the work presented in this thesis is the development and evaluation of …

A Virtual Training Environment For Temporal Bone Surgery, Denis Stack

Theses

A virtual training environment for temporal bone surgery incorporating haptic, visual and audio feedback is presented in this work. Data are derived from Computed Tomography (CT) scans, thus patient-specific cases may be examined in the simulator.

Two main classes of volume haptic algorithm exist for virtual surgery, namely proxy-based and non proxy-based. A review of the evolution of relevant haptic algorithms is presented. Proxy-based and non proxy-based algorithms are implemented and their performance measured against each other by comparison with real-world force data. An improved proxy-based feedback algorithm is also presented. This algorithm uses a spherical proxy which prevents the …

Trust Based Agent Geographic Coalition Formation For Intelligent Transportation Systems, Gary O'Connor

Theses

In recent years there has been an increase in the area of applied research for the intelligent transport domain. This surge in research has many contributing factors such as: advancements in information technologies, substantial escalations of traffic congestion and the advent of wireless networking. The possibility of collaboration among vehicles and roadside infrastructure enriches transportation systems, where the goals of improved safety, traffic efficiency and environmental benefits can be addressed. The primary objective of these Intelligent Transportation Systems (ITS) is the creation of advanced road traffic safety systems for improved traffic safety, efficiency and travelling comfort. These systems provide a …

Cross-Verified, Combined Methodologies For High Frequency Electrical Characterisation Of Electronic Packaging, Eoin Mcgibney

Theses

Methodologies for cross-verified, wide bandwidth (50MHz-20GHz) electrical model extraction for as-manufactured electronic packaging and interconnection are presented. They are presented in the context that packaging and interconnection is now following a rapidly-evolving Moore’s-type Law in terms of new generations of packaging and interconnection materials, technologies and manufacturing processes. Significant frequency content is also increasing while, at the same time, final product cost constraints mean that packages and circuit boards must typically be manufactured using low cost materials and mass-manufacturing processes, often geographically remote, with their inherently higher levels of variability. Wide bandwidth signal integrity analysis cannot be performed during electronic …

Smart Heating Systems For Green Homes, Cheryl Carmody

Theses

The focus of this research is to design an improved heating control system for a class of older energy inefficient dwelling to produce an improved living environment. Prerequisites for such control are sensors and models. Commercial sensor nodes enabled a multi-zone heating system to be considered. While the accompanying sensor node software was functional, it was not suitable for real-time control and was modified to achieve same. Once a prototype was developed and tested in the laboratory, it was deployed to a two-story residential dwelling in Cork city.

The requisite mathematical models describe the heat transfer characteristics for a particular …

A Two Dimensional Model Of Magnetic Field Assisted Assembly, Gaurev Devrani

Theses

A simplified model to simulate the magnetic field distribution for applications in magnetic field assisted assembly of semiconductor device structures, using commercial software (Vizimag), has been implemented. Solenoids have been utilized to serve as electromagnets that are responsible for the assembly process. Magnetic shielding techniques have been deployed to isolate the influence of one solenoid over another. These solenoids are used to move the devices that need to be placed in recesses within the substrate. The bottom of the devices and the recesses are coated with magnetic materials to facilitate the movement and placement of devices within the recesses in …

Raman Scattering In Free Standing Porous Si Films, Thenappan Chidambaram

Theses

In this thesis, Raman Scattering of free standing porous silicon on sapphire samples of controllably varying porosity is studied. The free standing, fully crystalline porous silicon films were prepared by electrochemical etching and the porous structure were lifted-off by a procedure based on electro-polishing. During Raman scattering measurements, the samples are exposed to relatively high intensity laser radiation. Free-standing porous Si sample temperature and thermal conductivity are calculated by comparing intensities of Stokes and anti-Stokes Raman peaks. Compared to crystalline Si, we find strong decrease in thermal conductivity accompanied by a change in the phonon spectra. Also, comparing Stokes and …

Synthesis And Analysis Of Carbon Nanowalls And Their Raman Spectroscopy, Amit Mahajan

Theses

Growth of Carbon Nanowalls has been carried out by Radio Frequency Chemical Vapor Deposition (RF-PECVD) on various substrates. Hydrogen was used as an active gas for the growth where as Ethanol bubbled with Argon was used as carbon source for formation of Carbon Nanowalls (CNW). The growth was then confinned by Raman Spectroscopy and Scanning Electron Microscope (SEM) images. Also the need of using catalyst in CNW has been analyzed. The intensities of D and G bands obtained from Raman spectrum have been related to the length of Graphene walls, to study the CNW's length on different substrates.

The growth …

Mesh Mac Enabling Mesh Networking Over Ieee 802.15.4 Mac Layer, Panneer Selvan Muthukumaran

Theses

Wireless sensor network is a network of sensor nodes that function in a cooperative manner to monitor the changes in the physical environment. Wireless sensor networks are used in environment and habitat monitoring, healthcare applications, building automation, and traffic control to name a few. Typically, wireless sensor node is a low power embedded device which consists of a microcontroller, sensors, wireless transceiver and a battery. These devices are usually distributed in a physical environment which makes it difficult to maintain the network manually.

The IEEE 802.15.4 and Zigbee are considered as standard protocols for wireless sensor networks. The IEEE 802.15.4 …

Management Framework For Hybrid Wireless Networks, Chong Shen

Theses

The objective of the Hybrid Wireless Network with dedicated Relay Nodes (HWN*) architecture is to interface the Base Station (BS) Oriented Mobile Network (BSON) and the 802.fix based Mobile Ad hoc Wireless Network (MANET) so that one system can be utilised as an alternative radio access network for data transmissions, while the incorporation of Relay Nodes (RN) is to extend the communication coverage, optimise medium resource sharing, increase spatial reuse opportunity, stabilise MANET link and create more micro-cells. The HWN* keeps the existing cellular infrastructure and a Mobile Terminal (MT) can borrow radio resources from other cells via secure multi-hop …

Design, Implementation And Evaluation Of A Networking Context Aware Policy Environment, Asanga Dhammika Udugama

Theses

Future mobile networks are anticipated to have support to access heterogeneous access technologies. An important question in such environments is the decisions on when to use what access network. These decisions must take the users and mobile network operators’ perspectives into consideration. The operators usually have a focus of always-best-managed networks while the users have an always-best-connected focus. A key enabler of such environments is the use of policies to perform these handover decisions. These policies, which must be dynamic in nature, should be configurable when the requirements change. Policy decisions are always made based on the current context of …